Broken Can-Am X3 XRS! | Front diff tear down!

Рет қаралды 18,004

Жыл бұрын

FLASHLIGHT LINK: www.olightstore.com/s/11KB7S
①Sale: 11/23 - 11/28
②FREE login gift-keychain light :
-If you are new to our website, login into our website and then you can get a free i3E Antique Bronze (worth:$12.99)
③Marauder Mini-30%OFF-discounted price：$139.99
In todays video I tear down my 2019 canam x3 xrs on 32 zillas and find the reason my front diff isnt locking anymore. I am running a halo 30 billet differential. Halo 30 torn down and explained.
Blown Diff Offroad AGAIN?! | Fixing My Halo 30 Diff on Can Am X3
Merch: teespring.com/stores/blownbud...
Subscribe for more here:
kzfaq.info...
For business Inquires:
Blownbudgetoffroad@hotmail.com
Loose Moose Motorsports:
/ loosemoosemotorsports
Machine details:
Justins machine is a 2019 Can-am X3 XRS. It is 72" wide and 172 horsepower. Suspension is setup to the fox tune with some additional ride height added. It is running 32x14x10 sticky Maxxis Roxxzilla tires on 14x7 Alba Crusher Beadlock Wheels with a 5+2 Offset. It has a Evo Powersports Shocker cat delete exhaust, Gear grabber shifter, Front limit straps from sandcraft. Warn Axon 55s with super atv front winch bumper. Super atv high clearance trailing arms, L&W Fab rear High clearance billet radius rods, CT Raceworx front end gusset kit, tie rods w bump steer delete and high clearance lower A arms. It has SuperATV Trailing arms, still running stock axles with the factory smart lok front diff, also running a Razor Sharp Customs Cage.
Billys machine is a 2020 Polaris RZR Turbo S Dynamix. It has a Trinity racing exhaust and tune, L&W Seat Lowering Bases, BS Sand Seats, Gear Grabber Gated Shifter, Trail Armor Full Skid Plates, Full Orb Suspension with 2" stretch, 32" Maxxis Roxxzilla tires mounted on KMC 15x6 wheels with a 5+1 offset, and Super ATV X300 300M Axles all the way around, KB3 Driveshaft, 33% Gear reduction in low, Skinny Pedal Fab Bed Delete with Razor Sharp Customs Cage
Joshs rig is a 2021 Polaris RZR Turbo S Velocity. It has L&W Fab Seat lowering bases, stock seats customized for a lower seating postion, gutted stock exhaust, skid plates, 32" Coyote tires on aftermarket beadlock wheels, Trinity Blow Off Valve, Full doors and i think thats it for now!
#utv #offroad #sxs

Пікірлер: 75

@BlownBudgetOffroad Жыл бұрын

Link to the flashlight for those interested! : www.olightstore.com/s/11KB7S Thanks for watching everyone!

@WDTOOffRoad Жыл бұрын

Thanks for the shoutout man! Glad I could help you out! Windrock vids are gonna be sick!- Brandon

@BlownBudgetOffroad Жыл бұрын

you bet brother

@OxOffRoad Жыл бұрын

Great video, FYI Halo has now added a positive bolt lock system for the ring gear bolts so they cant loosen. Additionally it was determined the locking pins were too hard causing them to fracture. They have brought the hardness specification down to fix the lock pin breakage issue.

@23bowser Жыл бұрын

Actual informative information ....well presented and explained......real guys with real machines. Love your vids keep it up!

@BlownBudgetOffroad Жыл бұрын

Glad you like them!

@jakeodell1548 Жыл бұрын

Always good to see shop videos, whether it’s trip prep or repairs. And can’t wait to see the windrock footage!

@BlownBudgetOffroad Жыл бұрын

Coming soon!

@wipeout8654 Жыл бұрын

I appreciate these types of in depth videos. Thank you !

@t.h.5389 Жыл бұрын

That's a really well made diff, I can't believe how good it looks after seeing how it's been used the last couple of years! Mind you, I also really enjoy your throttle control.

@greggneedham7658 Жыл бұрын

Love the content. The follow up work in the shop is a plus.

@BlownBudgetOffroad Жыл бұрын

Thank you!

@pete1735 Жыл бұрын

I love how you explain everything you do and how everything works great video

@BlownBudgetOffroad Жыл бұрын

I appreciate that!

@just_inolredneck8319 Жыл бұрын

Love longer videos man! Y’all keep having fun! I’d love to go with y’all but idk if a broken back could handle it.. so guess I will just keep hitting the like button!

@drivermodoffroad1545 Жыл бұрын

Awesome when a repair goes smoothly like that!

@BlownBudgetOffroad Жыл бұрын

It sure is!

@Spectrum184 Жыл бұрын

Why the hell would they sell a 6 pin model when it was clearly made for 8 pins? Glad you guys are getting more sponsors.

@opengchris18 Жыл бұрын

was wondering the same thing

@opengchris18 Жыл бұрын

was wondering the same thing

@thatoneguy2756 Жыл бұрын

That's what happens when the ring gear,bolts weren't cleaned thoroughly during assembly. Even if you use loctite and torque correctly it doesn't work if it wasn't clean and dried before oil was added.

@sxsoffroad Жыл бұрын

Love your shop. So much coveting happening over here… Nice work

@BlownBudgetOffroad Жыл бұрын

Thanks man appreciate that!

@robertenloe6356 Жыл бұрын

Good information, planning on doing a halo eventually and that’s helpful knowledge.

@BlownBudgetOffroad Жыл бұрын

Glad it was helpful!

@ebytrio5057 Жыл бұрын

Great video. Always glad to watch you guys work on your machines. Such good information presentation as you proceed through the video. Josh or Billy - I want to go with another machine. No turbo, just 1000 polaris or maybe a Kaw. I do like the 60 -64 inch. I know the Kaw is wider but possibly would go with it, depending on your feedback. Like the Trails and Rocks but wondering if maybe I'd be better off going with pro xp and build with winch and wheels and have a stronger built machine. I found a new pro xp 6000 cheaper then trails and rock. I've heard the kaw is a better crawler than the T & R but what I've seen it's the other way around. Thank you for your excellent videos.

@scottbennett847 Жыл бұрын

Very Educational Thanks for sharing this video

@willspoint88 Жыл бұрын

Great explanation! I need to find out if mine is the first or second generation.

@russellhegel1119 Жыл бұрын

I had that happen twice with my halo 30 with the up graded bolts with loctite high strength but after the second time I did research and used loctite 272 and holding so far and I made sure I used brake cleaner on bolts and ring gear to make sure was clean every time

@BlownBudgetOffroad Жыл бұрын

thats not exciting to read lol hope mines good!

@drmarkintexas-400 Жыл бұрын

Thank you for sharing Happy Thanksgiving 🦃🦃🦃 🇺🇲🙏🏆

@BlownBudgetOffroad Жыл бұрын

Same to you!

@KnownSender1 Жыл бұрын

Great video man 💯👍

@BlownBudgetOffroad Жыл бұрын

Appreciate it

@stevenbaugh9944 8 ай бұрын

Nice fix

@floridamanofficial Жыл бұрын

Keep it up! 💯

@vooduuchild3601 Жыл бұрын

CRAP. My 33 spline Halo 30 isn't locking either....frick....great video, sucks that this is gonna cost me even more money now.

@TheBandit7613 Жыл бұрын

Do a couple of quick front diff oil changes till everything is broken in. Run stupid good quality diff oil. I always stop to put it in four wheel even though it says shift on the fly. I prefer our sticky Western rocks to your slippery ones. Sandstone provides some incredible traction. You look at something and say no way, then crawl right up with virtually no tire spin.

@brokesxs2547 Жыл бұрын

That diff ❤

@rick3446 9 ай бұрын

great video but to save some time next time you only need to remove the pass side rear bolt for the upper arm to get the Diff out. :)

@jasonrushlow5689 9 ай бұрын

The issue isn’t loc tite. Those bolts have nord-lock washers. The issue is they aren’t torqued enough. And probably not biting into the hardened steel.

@joshpassarge9035 Жыл бұрын

Do you guys have any plans to hit wellsville Ohio

@brandonbaldwin6845 Жыл бұрын

If you had this problem again, or if someone else suspected this problem, would it be possible to pull one side of the diff case off while mounted in the machine and inspect the ring gear bolts? Such as on the trailer at camp?

@kwmiked Жыл бұрын

Makes perfect sense why it wasn't going in. Bolts were holding the fork from locking in. I'd get new compression washers, kinda like a lock washer, spray out the threads with brake kleen and red locktite, should be good

@kwmiked Жыл бұрын

Nevermind, new bolt kit with washers and red loctite 👍

@jimpotter7920 Жыл бұрын

What type of lift do you have and how tall are your walls in the Shop?

@95toycrawler Жыл бұрын

You guys ever thought of tack welding the bolts and pins so they don’t come out ?

@louisrobbins475 Жыл бұрын

I replied on the tackett video about the Halo. Good to know as I just got mine 6 weeks ago. When you guys come down need to let me know. Would love riding with you guys, not so interested in being in a youtube video. Me and my brother have quit the setup. Velocity on LW Fab susp, Pro XP on ORB, Pro R just clutch upgrades, and in the shop is our Max X with Halo, S3 susp and double shear kits with electronic sway bar, also from Halo and waiting on our Fortin Alternator. Korey at Loose Moose can vouch for me. I only harass him when I want parts.

@louisrobbins475 Жыл бұрын

Oneida Tennessee BTW, next to Huntsville.

@javadose317 Жыл бұрын

I have a pro xp (sport), stock suspension and tires and I’ll say I definitely struggled on trail 12 ride. After that I want to upgrade to long travel and probably zillas. Aside from gear reduction would you say 32’s would be a good size tire to go with? Was leaning towards orb and zbros dual rates . Looking for some input. Everyone around me had 35’s and clearance for days

@caseyb65 Жыл бұрын

Personal opinion here which is what I believe you are looking for, I have a turbo s, I have 32’s and I have considered going to 35’s but I don’t want to have to do the gear reduction, imo the bigger the tires means bigger traction which also means bigger repair bills

@caseyb65 Жыл бұрын

I do Believe that 35’s would help in some scenarios but let’s be realistic, how often do you take your rig up the stuff that these guys go up? I think that the long travel and zillas will Get you up majority of the stuff, very seldom do I get myself in a situation where I wish that I was on 35’s. Good luck with whatever you decide and ride safe👍

@Dylan_qualls Жыл бұрын

How many miles is on the x3? And diff?

@remibomb1313 4 ай бұрын

Make sure you use an oil tolerant loktite.

@junkforlessutube Жыл бұрын

If you had a bad back and needed something that was a plush ride on the Wisconsin trails, but could also roll at the Badlands off road Park(quarry included), what would you pick? Also, I think you may have forgot the flashlight link?

@BlownBudgetOffroad Жыл бұрын

Thanks for catching that! heres link : www.olightstore.com/s/11KB7S Also, Thats a tough one honestly because i havent rode in many 64 wide machines. Id say a dynamix pro xp if budget isnt a issue but thats just my opinion.

@junkforlessutube Жыл бұрын

@@BlownBudgetOffroad Coming from Hondas, I find the lack of engine braking odd on the Polaris and Can-Am.. but I don't think my back could handle more than a few hours of a Talon...

@darp6439 Жыл бұрын

We had a built Talon R, did the full shock therapy treatment and it still killed my back. On trips it was a day of riding and a day of back pain following. We loved everything about it but couldn’t get past the harsh ride. Sold it for a 2022 X3 XRS and the difference is unbelievable. These machines are not even in the same class of ride comfort and capability. Now I can ride day after day with no back pain. Sure I miss shifting but it’s hard to put in words how drastically different the ride quality is.

@anthonyprater2872 Жыл бұрын

Did you put a locker in your talon

@DUNEATV Жыл бұрын

You need to rebuild an old YXZ and turn Josh loose!!!

@BlownBudgetOffroad Жыл бұрын

maybe one day. that would be cool

@DUNEATV Жыл бұрын

@@BlownBudgetOffroad 👍🏻👍🏻

@garydavidson8273 Жыл бұрын

Torque wrench, hmmm what’s that?

@drummerboy11122 Жыл бұрын

Link to the flashlight?

@BlownBudgetOffroad Жыл бұрын

thanks for catching that, sorry. www.olightstore.com/s/11KB7S

@nuffsaid6807 Жыл бұрын

When I tighten my bolts..they call it the "Hicks grunt" 8 out of 10 I break bolts lol

@Hastings_Racing Жыл бұрын

Just zip tie that flashlight straight to the camera lol

@willbradford8333 Жыл бұрын

Olight aka a shiny hand grenade lol

@101rotarypower Жыл бұрын

Anyone else think it's ridiculous to have to take both sides of the suspension components to release a single side on the X3? What benefits does that serve, compared to the effort of disassembly when it's time to repair a single small failure? Which extends to the hassle of having to remove the complete CT gusset kit because the stock chassis material is so weak and thin it requires it if you do anything beyond light trail riding, so the diff can't come out unless you remove all the suspension components interlinked into the system. I hope canam goes to a more standard center hinge point system, had to pull all that stuff apart a few times, and it's so much more complicated and time consuming than it needs to be for what feels like no reason with a poorly executed design for the user.

@BlownBudgetOffroad Жыл бұрын

i 100% agree. One of my biggest complaints with the x3 is the front end design for working on them. The rear with 3 radius rods isnt ideal either.

@drummerboy11122 Жыл бұрын

I heard a boy blew his out up there on 16 ahead of us at windrock. Yall see that?

@BlownBudgetOffroad Жыл бұрын

a halo 30? i seen a diff detonate but wasnt a halo 30

@drummerboy11122 Жыл бұрын

@@BlownBudgetOffroad no I heard just a regular smart lok but that would have been interesting to see either way

@BlownBudgetOffroad Жыл бұрын

Oh, yes we seen a diff in a x3 literally break in half lol wasn’t sure if it was smart lok or visco with locker

@drivermodoffroad1545 Жыл бұрын

Awesome when a repair goes smoothly like that!