This vise will never resist to a real strong work.She will broke again at the first serious usage.Well, your vise is just like my English.

And the SICK metal achievement award goes to YOU !!! Outstanding !!!!!!!!

Не плохо бы теперь зажать что-нибудь в них, проверить качество шва! Думаю на раз эти тиски!)

After seeing that welding job, I can understand why you didn't show clamping of anything. No Dude, Cast Iron Rods are available for Arc welding from just about every hardware store, and pre-heating and chamfering of the casting is a must, that job is not gonna hold.

These videos always make me feel lazy, rather than doing it myself I'm just chilling here in my comfy seat with a coffee watching someone else doing all the hard work lol

This tool is now ready for exhibition only, not for work!

Смотрю и вижу напильники, которые делал наш инструментальный в 70х, потом до боли знакомый ккуглый напильник, АГА а в конце на тисках ГОСТ ну ёмаё знакомые детали из СССР. И еще резанул глаз электрод с медной проволокой, как меня учил старый мастер, но он же говорил что это бесполезно., ибо как новый не будет...

Such a good job ! Very pleasant to watch. Subscribed ! 👋

Looks noce as display Item. Unsuitable for heavy work. Chamfer for weld not been made, not been properly preheated and cooled.

Cool it’s always good to see something well-made been brought back to life I hoip whoever has this Vice Has many years of good use out It

Absolutely brilliant, your work is a great inspiration for my own videos😊👍

Again, Eeee, well done again, it's a great honor for me to see another person with precise attention to detail and his wonderful work, well done and respect from old BG.

I really enjoy restorations videos like this. I learn something new every time.

Your tools and workplace and techniques are good

excellent video thank you for sharing with us on youtube

Enjoyed watching, keep em coming.

I'm a new subscriber and think your work is good. Don't pay attention to the negative comments most of those people prob never restored anything in their life. And practice makes perfect. I'm sure u know what needs improvement and your doing the right thing by even restoring these parts. Keep it up.

Wow, this is a really good job👏👏👏

On the 11:28 you've made a trick with wrapped copper around your welding rod. Could you tell us more about that?

Thanks bro I enjoy watching ur vids. Keep up the good work. Its obv that you enjoy what ur doing. That's a passion at heart!

Perfecto !! Que desafío !!

BEAUTIFUL !!

Nice effort. you have the determination, take your time think it over, you will get there.

applaud the effort. thanks

Great job!

Hi dear friend. My name is Hadi and I live in Iran. I was 👏👏amazed at your accuracy and creativity in doing things. dude I am a fan of your channel. I introduce your KZfaq channel to all the people of my country and I pray to God that you and your family and everyone you love are always healthy.😍👏👏👏

Good work!

Қойил. Отангизга рахмат

Turned out nice

Он его продаст. Не покупайте с рук крашенные тиски.

Uno dei più bei lavori di restauro, a cui abbia mai assistito, complimenti.

Ficou extremamente linda!

I watched this video only to see what method you use for welding the two pieces. After watching i have come to the conclusion that your work might be good but the joint you welded would never last long. No matter what method you use.

варить чугун бесполезное дело.Их теперь только в сервант поставить...Лучше бы без трещины нашел и реставрировал.

2 вопроса: 1) зачем призму для труб с губы убрал; 2) зачем губы сгладил?

I know you can it repair i like you video

Eine sehr gute Restauration. Respekt.

Very nice job.. Camera work is very good.. I do have one suggestion and it can actually save u some money.. Put away the WD-40 for squeaky door hinges and mix up a 50-50 batch of Acetone and Automatic Transmission fluid.. It makes WD-40 look like water.. spray it on heavily and let it soak up to 4 hrs before recording.. I noticed how heavily u applied the WD-40 and when you removed the screws the threads were still dry.. You're doing a fantastic job, keep it up...

Easy with the bondo there dude...you just want to apply enough to fill the holes in. Otherwise you just make more work for yourself. The welding was...interesting. Not sure it will hold up to heavy use. Not sure why you filled the entire side with the lettering in with filler. You have a small die grinder/dremel. That's perfect for cleaning the letting out. Most of the chamfering you did on the sharp edges would have been cleaner using a file. Small die cutters are very hard to use to make a nice even chamfer. You also painted part of the bottom where the parts slide together. Keep working on your skills and aquire more tools...the right tools make all the difference. When fighting rusted/frozen bolts, stick to a 6 sided socket. 12 points will get you into trouble. Overall it came out pretty well. Take your time too...you already put that much time into it. Might as well put in a little bit more and have an outstanding finished product.

After watching My Mechanics everyone else on KZfaq is like amateur hour.

Great job. Amazing

Wow that was a badly abused little vise but you gave it a new life. Excellent work!

Bel lavoro 👍

Świetnie jest to stare przedwojenne imadło odremontowane pozdrawiam twórcę tego filmiku serdecznie 👍👍👍👍

Много лишней работы, которая на конечный результат никак не сказалась. Что шпаклевал ты их, что нет , покрасил бы сразу и результат был бы такой же ! И самое главное держать сварка без разделки и усиления вряд ли будет.😉

فنان عمل رائع

It is very but can restore, Nice

HELLO MY FRIENDS. I AN ROGER OF BRAZIL.....THIS VIDEO IS VERY TOP !!!!

Good job

🤟🤟 good job!

Eine gute Arbeit von einem guten Mann!👍😁🍀 Viele Grüße aus Deutschland

Those vises are soviet, where did you get them? Good work✓

Great restoration as always!

good work

Great job thanks for sharing your great talent

Bravo...

Bom trabalho

Truly a Beautiful Boat Anchor.

Looks good. I suspect that you forgot to put the grid pattern on the jaws blocks. It may grip but any pounding will loosen too quickly. Longer bolts for base pedestal so you can rotate and not lose nuts when you need to adjust. My hands hurt after watching you sanding. Nice work.

I feel like there's a lot of negativity in chat. Thank you for sharing your work.

hard worker, thumps up

I've watched the whole video just to know how is he going to weld the broken parts only to see this inappropriate and weak joint !!!

Showww top👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇧🇷

You tube recommended this video to me. First time I have seen your work. Very impressive. I have seen many vise restorations and that vise was by far in the worst condition to start working on. I subscribed immediately after watching and will check out your other videos.

БУ,ТАФОРНАЯ работа на 100% надо знать сопромат или хотябы металоведение

That weld won’t hold beyond the first pinch of the vice jaws. In forty years of engineering I can truthfully say I’ve never seen anyone wrap what looked like a standard mild steel electrode in copper wire. You should have used a low hydrogen version, bevelling the edges prior to welding. Keep trying though, the rest was good, barring when you straightened that clamp bar on the jaw of the vice jaw rather than using the little anvil at the back . . .

Very nice. You did an excellent job!

welding cracks in cast exhaust manifolds is totally doable, welding cast on a broken vise will never hold, even if you managed to get the weld to hold, it will just break right next to the weld......

Nevermind the weld, never ever buy a swivel vice. That aside, I think you're stating and I'd like to encourage you to continue, get a tripod for the camera (there are some telescopic ones that work on the table or floor, but some are expensive) that will get you better shots, keep honing your skills, awesome work.

Enjoyed the video, good job🔥🔥🔥

Amazing

DES MAINS EN OR ! BONNE JOURNEE

Very nice job not using a mill or lathe

One vice restoration among hundreds. These restorations spring up faster than sailing channels!

GOOD VERY GOOD 🌹🌲🌹🌼🏵️🌸🏵️

Confused as to why you ground off the cross hatching on the jaws? That's put there for a reason, so you can grip your workpieces.

THank you. I only saw Nasarov Method in books... Now I can say I already saw somebody using it.

Бриллиант :)))))

8:03 the old piece with deep rust marks 8:20 another piece, complety new

про гладкие губы шпатлевку и сварку чугуна тут уже много писали?)))

*500 sheets of sand paper later* “I may have put too much bondo on this thing”

Mamma mia che figata..

Very good friend, let's create together, see you all again

Will dun a good job thank you 😎👍

The benchmark has been set so high now that without the right tools you're going to struggle to live up to expectations. Don't give up dude.

Nice piece of shelf art, looks good but can't be used to perform its primary purpose. Like I said nice piece of artwork. Texas watches.

Даа, прям красиво снято,,,,,а деталь так себе

Пустая работа. на полку поставить, ждем тестов.

Nice

Good restoration

Penetrating oil is best left soaking a couple of days, a touch of butane is best releasing treatment. Great video interesting too

Looks nice. But not sure of the strength with that weld though.

Looks nice.👍

Your artistic perspective and mechanical skills are amazing Sir. Beautiful restorations!

Que lindo pisapapeles

I see a lot of hate here in the comment section. Making a piece like this into art isn’t a bad thing. Probably still do okay in lighter jobs, too.

Wonderfull work, only need improve the weld

Дружище, завидую, времени у тебя много свободного, чтобы такой реставрацией заниматься. Тисы то работают, не лопнул шов?

.هاللـًـًٍـٍَـًٍـًٍـًٍه هاللـًـًٍـٍَـًـًٍـًٍه جميـــــــــــــــــــــــــــــــــــــــــــل

Где ж вы только их находите...?)))