How To Replace A Tire Valve Stem Without Removing The Tire

Рет қаралды 295,453

Күн бұрын

Step by step instructions using basic tools to remove and replace your wheels valve stems. Link to tool below! #bronco #valvestem #wheels
PLEASE HELP SUPPORT THE CHANNEL IF YOU ENJOYED THE CONTENT.
PayPal: n2kpi@yahoo.com
Venmo: @broncosandparts
Cashapp: $broncosandparts
It really help with keeping the videos flowing, the lights on and with shop supplies. Even a few bucks.
Letting all the ads play during the video also helps a tiny bit too.
Thanks!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Tool Link:
AME INTL Quick Valve Change Tool
amzn.to/3LwaaUi
Other Options:
Quick Valve Change Tool
amzn.to/3L3SBup
********************************
Laser LAS5540 5540 Tyre Valve Tool Set 3pc
amzn.to/3isloNb
(No stems included)
*******************************
B'laster 16-SL Industrial Strength Silicone Lubricant - 11-Ounces
amzn.to/3o5LXeL
Follow along on:
/ broncosandparts
@broncos.and.parts.garage on Instagram
Email : n2kpi@yahoo.com
We sell used Ford Bronco and OBS Ford Truck Parts
FTC Disclaimer
---------
This video was not sponsored. All items were purchased with my own money unless otherwise stated and opinions are my own. If I do receive products for free, I will always disclose it, and always give my honest opinion.
This description contains affiliate links which means if you click on one of the qualified product links, I’ll receive a small commission if you decide to make a purchase. This does NOT cost you anything extra and if you don’t want to use the links you can always search Google and purchase the product separately, no worries.
Thanks !

Пікірлер: 175

@BroncosandPartsGarage Жыл бұрын

This is on sale now!! Under $38. amzn.to/3LwaaUi

@filmaker256 Жыл бұрын

for lube could i use a little motor oil?

@BroncosandPartsGarage Жыл бұрын

I wouldn’t. But in emergency….

@SerenoOunce 2 ай бұрын

@@filmaker256 *NEVER* use oil on rubber. Any petroleum distillates will cause it to degrade. You would use silicone lubricant or possibly WD-40 at most. Best DIY lube for anything tire related is actually plain dish soap.

@AndrewLaneCPA Жыл бұрын

Thank you for this video it was just as quick and easy as you showed it. I initially ordered the kit where you have to remove the tire and got nowhere as it is not an easy task with a wide Kubota Tractor tire. This kit was well worth the extra money in time saved.

@matthewmolina9485 Жыл бұрын

Excellent! Very well done! No BS! No blah blah blah! I was really impressed with your video! I wish all KZfaq videos didn't have so much BS, people listening to themselves talk. Again! Well done!

@BroncosandPartsGarage Жыл бұрын

Thank you

@tonyalways7174 Жыл бұрын

Excellent clear no waffle video. 👍🏻👏🏻👏🏻👏🏻

@BroncosandPartsGarage Жыл бұрын

Glad it was helpful!

@neilsunseekers 4 ай бұрын

Thanks I never knew you could do it so easy, I will give it a go.👍

@BroncosandPartsGarage 4 ай бұрын

Links for kit in video description.

@Trydntru 2 жыл бұрын

Great heads-up on that tool. Great video.

@BroncosandPartsGarage 2 жыл бұрын

Thanks. I thought it was pretty neat. Small insurance.

@lowlikeme Жыл бұрын

Dude that's cool😎👍...like how U explain everything....Thank You

@BroncosandPartsGarage Жыл бұрын

No problem. Thank you

@Skitter302 2 жыл бұрын

Adding this to my Trail kit. Thats cool.

@BroncosandPartsGarage 2 жыл бұрын

Not a bad option for a few bucks

@beeshglock8999 Жыл бұрын

this is so helpful! thank you!

@BroncosandPartsGarage Жыл бұрын

Hope it helps

@bradheiner6869 6 ай бұрын

Great Job !! Looks pretty straight forward

@BroncosandPartsGarage 5 ай бұрын

Thanks

@tilluballu6009 Жыл бұрын

Very nice knowledge 👌 thankyou very much.

@BroncosandPartsGarage Жыл бұрын

Thanks for liking

@donpoochi 8 ай бұрын

Your video was honest and awesome

@BroncosandPartsGarage 8 ай бұрын

Th is. It was fun to make

@BroncosandPartsGarage 2 жыл бұрын

Don’t Forget To Subscribe For More Content !!

@dxbfk Жыл бұрын

Excellent tools.

@BroncosandPartsGarage Жыл бұрын

In the field- priceless. Link in description of video

@davesbroncogarage Жыл бұрын

Great video, I needed to do this very thing two months ago to my Bronco. I didn’t know a tool like this existed and had to take my tire to the tire shop.

@BroncosandPartsGarage Жыл бұрын

Thank you!!

@rickobrien4025 7 ай бұрын

Wasn't it cool that the video shows him fixing a Bronco wheel , just like yours !

@ahmedbamouh4936 5 ай бұрын

Thanks for the tip

@BroncosandPartsGarage 5 ай бұрын

No problem!

@magdump7380 3 ай бұрын

Love the Alcoa’s. I run the same wheel on my ‘74 Bronco.

@BroncosandPartsGarage 3 ай бұрын

Forged and tuff!!! We sell them used.

@dandiaz2275 6 ай бұрын

Thanks for sharing

@BroncosandPartsGarage 6 ай бұрын

Thanks for watching!

@Sadie04074 2 жыл бұрын

Thanks!

@BroncosandPartsGarage 2 жыл бұрын

No problem

@jthek2000 Жыл бұрын

Great video. I’m doing this project for 4 tires later this week. Wish me luck.

@BroncosandPartsGarage Жыл бұрын

Take ur time. Don’t bent the j-hook. Lots of lube. Pretty straight fwd

@Tonyscasa 5 ай бұрын

How did it go ?

@jthek2000 5 ай бұрын

@@Tonyscasa worked out perfectly

@chrisallen399 9 ай бұрын

My old valve stem fell into the tire. It’s ok bc the tire is on a trailer that sits in the yard. Everything else worked as you showed. Thank you.

@BroncosandPartsGarage 9 ай бұрын

Won’t be an issue

@bigpeezyweezy 5 ай бұрын

@@BroncosandPartsGaragegreat guy!

@mary-louepner5370 Жыл бұрын

Good info

@BroncosandPartsGarage Жыл бұрын

Glad it was helpful!

@gerardjones7881 6 ай бұрын

you can use any funnel that fits, a piston circlip install tool also works. i've done them with soap and a screwdriver in a pinch.

@BroncosandPartsGarage 6 ай бұрын

This one won’t deform. It’s a nice kit

@orig66Super 2 ай бұрын

Thanks

@BroncosandPartsGarage 2 ай бұрын

No problem

@robertbennett3432 2 жыл бұрын

Good job thank you for the info.

@BroncosandPartsGarage 2 жыл бұрын

Thank you

@user-dx5ds3xb9l Жыл бұрын

גאוני -BRILLIANT

@BroncosandPartsGarage Жыл бұрын

Thanks

@bradheiner6869 5 ай бұрын

Yea anytime Your video was great

@BroncosandPartsGarage 5 ай бұрын

Thx

@ChristopherPowers77 2 жыл бұрын

Huh... well that's cool! When I was a kid I worked a stint at Benny's changing tires and I replaced lots of them but never like that!

@BroncosandPartsGarage 2 жыл бұрын

I thought it was pretty cool as well. I guess it’s been available for a long time

@Masjo-tw7uh Ай бұрын

Nice

@BroncosandPartsGarage Ай бұрын

Thanks

@adiljames2913 Жыл бұрын

MERCI POUR LE TUTO

@BroncosandPartsGarage Жыл бұрын

No pr

@u.s.a.198 2 жыл бұрын

Ty.. I have a 2003 gm..

@BroncosandPartsGarage 2 жыл бұрын

Glad it helped!!

@kellymitchell6084 9 ай бұрын

Nice to know

@BroncosandPartsGarage 9 ай бұрын

Thx

@johnnys8393 9 ай бұрын

I just tried this using this exact tool. The valve stem came out fine enough, but for the life of me I couldn’t get the new valve stem into the wheel. I used enough lubricant that Ron Jeremy could slide through a keyhole and hammered the absolute sh!t out of it but the end of the valve stem still wouldn’t go through the hole at the end of the valve stem guide.

@BroncosandPartsGarage 9 ай бұрын

Strange. I’ve used it a few times. My first was that video!

@SerenoOunce 2 ай бұрын

Did you use a dead blow hammer? A normal hammer would have too much bounce-back when hitting a soft material (rubber).

@Jordan-ql6tm 10 ай бұрын

This was a super informative and easy video appreciate your quick no BS way of explaining things LOL. You are into sub my friend

@BroncosandPartsGarage 10 ай бұрын

Thanks for the sub!

@Jordan-ql6tm 10 ай бұрын

@@BroncosandPartsGarage your video is gonna save me some trouble lol. Lost my wheel lock and found my ole '98 z28 with a flat in the garage lol. Gonna be. A few days before the wheel lock replacement gets here, lucky they still had some it was a good decade old discontinued model and they only had 20 left 🤦.

@shark70007000 Жыл бұрын

Wow! That is awesome! I need that tool! LOL That's what I get for being cheap. Not replacing those when I change my tires. The hook tool isn't my biggest concern. I don't mind pushing the rubber piece into the tire to be removed next time I have to change tires. So I really just need the funnel and puller parts.

@BroncosandPartsGarage Жыл бұрын

Right on. Out. You don’t want that bouncing around throwing off your balance.

@shark70007000 Жыл бұрын

Update: got tool. I now have 2 end pieces of valve stems in the tire. Spinner handle part is in pieces, hands all beat up. First attempt, the edge ripped off the new stem where it was going in. Once I find my valve stems that I set aside for the job, then I will attempt a second one. Wish I had the dead blow hammer. The hook tool looked like a bigger hook than that one. I couldn't get the tool out until it finally just pulled through the rubber and dropped that piece of rubber into the tire.

@shark70007000 Жыл бұрын

Update: Now that I used my splitting maul, it went right in without a problem. Then I pulled it out, into place. 👍🏼

@larsbonnesen5930 9 ай бұрын

I recently had a leaking valve stem. Called the tow truck and arranged time at the tire shop. But the tow guy could fix the valve on the spot almost like you did - but instead of pulling the old stem out, he broke it off and pushed the rest of the stem inside the tire. The rest was like you did it. So now I have half of a stem rolling around inside my tire... but it doesn't seem to do any harm...

@BroncosandPartsGarage 9 ай бұрын

Nice. Better to take out but job is done.

@josephhomen 25 күн бұрын

It’s fine

@decideswell6699 2 жыл бұрын

What lubricant should I buy? Do I need to wire brush any corrosion? I wonder 💭 will it leak any sooner then normal ?

@BroncosandPartsGarage 2 жыл бұрын

I used silicone spray. You can use dielectric grease too. Wire brush would depend on your wheels finish. You don't wanna destroy paint or aluminum, wheels!

@JohnSaylock-ec4cd 7 ай бұрын

Ha ha K-Y jelly might be the ticket.

@bradhudson2468 2 жыл бұрын

Can you do a video on removing the pull out ashtray?

@BroncosandPartsGarage 2 жыл бұрын

Pull out ashtray. (Not all the way) Remove (2) 7mm screws in the black chassis. Then under the ashtray you’ll find another 7mm screw in center. Remove. Slide ashtray out a ONE UNIT. Never try and remove the ashtray without the metal chassis. There are some harnesses to unplug.

@bradhudson2468 2 жыл бұрын

@@BroncosandPartsGarage Thank you, saved me a lot of time!

@tomato1417 Жыл бұрын

Anyone tried this with the HIGH PRESSURE rubber valve stems used on light trucks? I'm guessing the hight pressure variant of stem would not insert. Would appreciate any working knowledge.

@BroncosandPartsGarage Жыл бұрын

These were on F150 wheels.

@psycuhdelik8858 7 ай бұрын

i hope i can do this with the wheel still on the car... i got new tires and didn’t know they apparently wheel locked EVERY lug nut or something. like 3 different ppl tried to use the key and cracked it. now one of my tires is flat and won’t take air. 😩

@BroncosandPartsGarage 7 ай бұрын

kzfaq.info/get/bejne/qM9-ZpWJ2NPRZoU.htmlsi=YndEWU1bUzGcEal_

@7008aspen Жыл бұрын

Hell Yeah

@BroncosandPartsGarage Жыл бұрын

Thx

@fhazen01 Жыл бұрын

I could be simpler still with a tire that doesn’t require balancing. Simply cut the valve stem flush with the wheel and push what’s left inside the wheel. Then proceed with the tool and cone as in the video. The little knub of the stem floating around inside the tire won’t hurt a thing.

@BroncosandPartsGarage Жыл бұрын

Many ways. This one’s pretty cool.

@uso_Jus2SmooTh94 Жыл бұрын

Ok what's that hook tool called and the other one and where can I get it from?

@BroncosandPartsGarage Жыл бұрын

Click on title of video. Link for amazon

@Andy-Gibb 9 ай бұрын

After reading the comments you are all forgetting this tool is for when you are in the bush and can't find a tyre fitment shop to replace the valve stem. Also it for emergency use when you are out far in the bush and haven't got a way to get to a town to get a tyre fixed. Is it not better to have peace of mind knowing you can at least fix a broken valve stem if you need to? It is the same as having a puncture repair kit in your vehicle only it is for valve stems.

@BroncosandPartsGarage 9 ай бұрын

Bingo

@anthonyraymond4933 8 ай бұрын

That was like 269 seconds pretty close to the 10 seconds you told us in the beginning lol 😅

@BroncosandPartsGarage 8 ай бұрын

Thanks for watching the video. The entire process to 269 seconds, but the process of leveraging, the valve stem out of the wheel with the Tool took about 10 seconds. 💥

@johntexan4165 Жыл бұрын

Think I would be able to do this without removing the wheel from a camper trailer?

@BroncosandPartsGarage Жыл бұрын

Yes. As long as the stem is “flush” on the wheel.

@trollrx 8 ай бұрын

If the pulling tool is junk a brake spring tool will do the same thing and it's much sturdier.

@BroncosandPartsGarage 8 ай бұрын

Except….. it’s a great trail tool.

@timothydaly4136 10 ай бұрын

good tool but guys in florida change them for $10

@BroncosandPartsGarage 10 ай бұрын

Not on the trail though 😉

@Mark-Dibble 2 жыл бұрын

Is this a temporary fix or is this the same type of valve stem that a tire store would install?

@CriCKiD3 2 жыл бұрын

Its the same that a tire store would install. they're relatively cheap, just make sure you get the right 'size', it should say on your old stem. easiest way to tell

@BroncosandPartsGarage 2 жыл бұрын

Well said. And true

@BroncosandPartsGarage 2 жыл бұрын

Tire store quality.

@Mark-Dibble 2 жыл бұрын

Awesome! Thanks guys! I’ll forever be keeping this repair kit in my tool box.

@angelisone Жыл бұрын

2011 Hyundai Tucson has TMPS sensors. Can I remove sensors out and would this or other normal valve stem would fit? Unless anyone knows the battery size on the TPMS, then I can change it. Don't have suv yet & just helping a friend out.

@BroncosandPartsGarage Жыл бұрын

Sensors need tire removed from bead

@angelisone Жыл бұрын

@@BroncosandPartsGarage No, not really. The tire doesn't really need to be removed out of the wheel. My question pertain to the normal valve stem to be installed onto the wheel & not using the TPMS sensor.

@lostgary0 Жыл бұрын

Your tpms light will be permantly on if u remove a tpms sensor. Other than that ur good to go

@angelisone Жыл бұрын

@@lostgary0 The TPMS indicator light is burnt out🙂 Gaskets/O Rings worn/cracked & dead batteries. Not really good to go until they need wheel balances. Remember TMPS has some weights vs just V Stems.

@lostgary0 Жыл бұрын

@@angelisone ya and and u would need wheel balanced after taking tpms sensor out what’s ur point ?? I’ve done it in multiple vehicles

@jbraborn 3 ай бұрын

Given how it works, I feel like you could just yank it out with some pliers though, right?

@BroncosandPartsGarage 3 ай бұрын

There is a tool for everything and this one does it perfectly

@jbraborn 3 ай бұрын

@@BroncosandPartsGarage for sure, I'm just wondering if you feel that this is necessary

@rickc2222 Жыл бұрын

looks like one could easily save $40 and rig it up yourself with a plastic funnel (the long skinny ones) and a thread on valve puller tool. - might need to weld or glue the pivot so it stays straight. This tool kit should really be only $10-15 given the super basic cheapness of it

@BroncosandPartsGarage Жыл бұрын

Those pullers ALWAYS rip the valve stem in half. Lol. But have at it. It’s a great kit

7 ай бұрын

This is actually the valve, the valve stem is part of the valve

@BroncosandPartsGarage 7 ай бұрын

Yawn…

@user-vd4ib2gm9j 2 ай бұрын

one or two use item- I will break the bead because for $38 I could have somebody else do the work

@BroncosandPartsGarage 2 ай бұрын

Not out in the woods.

@vegan-rising 6 ай бұрын

probably won't work with the thicker valves, the ones that go on winter rims

@BroncosandPartsGarage 6 ай бұрын

can only try!

@mattradcliffe9279 Жыл бұрын

Why not break the bead on one side, stand on the sidewall. Cut the old stem off from the back. Pop the new one through. Done and inflating in under a minute.

@BroncosandPartsGarage Жыл бұрын

Lol. Thanks man. That made me laugh. Out on a trail, breading a bead by? Standing on a tire? If you can do it in under a minute I’ll eat my iPhone.

@thecrowsblow 9 ай бұрын

Yep, take the wheel off, break the bead, remove the old valve, install the new valve, put the wheel back on. All done in one minute. Sorry..."under a minute." I agree, that's a lot better way.🤪 I'll look out for your video.

@1960house Жыл бұрын

I would not be using spray lube on any truck or trailer tire stem aired up to 65 psi...

@BroncosandPartsGarage Жыл бұрын

These were OBS ford wheels and tires. 35-40 psi. Always follow manufacturers recommendations. I’ve never seen a valve stem “shoot out” of a rim in 52 years…. Always a first I guess

7 ай бұрын

This is actually just the valve, the valve stem is part of the valve.

@BroncosandPartsGarage 7 ай бұрын

Yawn

@patriciareynolds2729 2 ай бұрын

just cut off stem and it falls inside tire to flop around which isnt good.

@BroncosandPartsGarage 2 ай бұрын

If it’s no good, why not do it properly? It’s a $40 item.

@autoshopboss Жыл бұрын

Or you can always just come on down and I got ya

@BroncosandPartsGarage Жыл бұрын

Think out in the trails….

@Andy-Gibb 9 ай бұрын

Just take a spoke from a bicycle to remake the puller.

@BroncosandPartsGarage 9 ай бұрын

I always carry bike spokes in my truck!! 😉

@jasontalbot1379 10 ай бұрын

Tool over $30 that breaks after two uses. Tire shop can just do it for me for less than that

@BroncosandPartsGarage 10 ай бұрын

Not out on the trails you can’t. 😉

@CerebralAilment Жыл бұрын

Ya lost me at $32 tool.. lol $10 to have a shop replace the valve stem.

@BroncosandPartsGarage Жыл бұрын

Your missing the point here 😃 Good luck finding a shop out on the trail. Or traveling to tire store and waiting 1-2hrs.

@euromobile900 Жыл бұрын

Hah, where can you get a shop to replace a valve stem for $10?! I want to go to such a shop! In new england they charge at least $30 - if they deign to do it at all!

@christinarenae7839 8 ай бұрын

Ok why does this title say without removing the tire yet the tire is removed already?

@BroncosandPartsGarage 8 ай бұрын

Demonstration purposes only. Changed nothing regarding the use. Thx for watching.

@martinpetersen6266 Жыл бұрын

how can they charge 32$ for this? seriously..... it's a hook and a plastic funnel.

@BroncosandPartsGarage Жыл бұрын

Out on a trail….. it’s priceless.

@karmafarbus160 2 ай бұрын

Steel Valve stems . never replace them again

@BroncosandPartsGarage 2 ай бұрын

Having steel touch aluminum would cause electrolysis and you’d have oxidation within months, wouldn’t you?

@pavleestrajher8751 6 ай бұрын

Just push that thing inside with a screwdriver man it's rubber

@BroncosandPartsGarage 6 ай бұрын

Right way vs wrong way! Perfect trail tool

@duckhunter8387 10 ай бұрын

For $32 just break the bead

@BroncosandPartsGarage 10 ай бұрын

Out in the field???

@dreadnought2024 8 ай бұрын

I could have had the shop do it for $5. Just saying....

@BroncosandPartsGarage 8 ай бұрын

A shop out on the trails? Or on vacation somewhere? Hmmmm

@wadeadams2775 Жыл бұрын

Too many special tools. Couldn't really see

@BroncosandPartsGarage Жыл бұрын

Lol. Only two tools. Thx

@christiane9449 Жыл бұрын

$38 same shit as the shop, might as well take it to the shop🫠

@BroncosandPartsGarage Жыл бұрын

On a trail…. No shops around

@christiane9449 Жыл бұрын

@@BroncosandPartsGarage in your scenario you aren’t in a trail you’re in a garage🤷🏽

@anthonysalonek9462 Жыл бұрын

you can use it for years

@christiane9449 Жыл бұрын

@@anthonysalonek9462 same with the shop