Thank you, I got it on the first go. Just from the shipping company today, first time using a serger. I am using it on the first day of getting it. You are a wonderful teacher.

Such a great teacher. 8 months later; Today is the day I’ve built up enough confidence to use my brand new serger I received on Christmas ☺️. Thank you for sharing.

I just ordered this machine & watched your video to prep for it's arrival. Wow! Great explanations and video angles. 10 minutes ago I was afraid - now I know I can do this. Thank you!!!

I try to minimize my waste so I would recommend using that cheap quality thread for maybe a basting or teaching your kids to hand sew rather than just tossing it. This video series has been wonderful.

Great video I just received my Brother 1034DX😆 I wanted to know what thread 🧵 did you use in this video?

Your video is so awesome, with clear concise & easy to understand instructions, demonstrations and the whys and why nots. I was on the verge of putting my machine back in the box in the closet after unsuccessfully for 2 days attempting to thread it. Now maybe I can start to learn how to sew and serge!! Especially having to stay in the house these days. Thanks soooo much!

Thank you so much. I was able to thread it on my first try with your intructions. You made it seem so simple and it totally was. I'll continue to come back to your videos for help with my serger in the future.

I got this serger at Walmart for just $25 on a clearance, the best deal ever, yet it has sat in the box. Since this Covid virus thing now and I wanted to make masks and found a video for making them fast with a serger, I got the serger out and noticed it wasn't threaded right out of the box and wasn't sewing a chain right either, so I knew tying off to put on the new thread was out, so with the help of the video above, I was able to do it (and I didn't think I could!). The discs that came with it for threading was useless as I couldn't enlarge the screen so I couldn't see anything. If it wasn't for the video above and how the lady instructing it showed it all, I would never had done it. Thanks so much!!!

Thank you so much. I watched other videos and still couldn’t get my machine threaded. I found your video and BINGO! I was able to actually see each step you were doing and follow along. Thank you so much! You are a great teacher.

OMG! thank you, thank you, thank you. I was sooo frustrated with this machine and haven't used it at all. this video saved me. FINALLY I can thread this machine and start to actually use it.

What a great tutorial, thank you so much. Very helpful!

Well done Sara. Your instructions are clear and complete. Thank you.

Your video was great helping me learn how to thread my serger. The presser lift shaft broke and my husband repaired it for me. This is the first time ever threading it. I usually tie off. Thanks so much.

Finally a excellent tutorial on threading.. I’m saving to buy this machine...I have a Elena and it’s so hard to thread looking forward to other tutorials

Thank you so much, I'm a visual learner and this made it so easy

Great great great video! i was really struggling and you made it so much easier for me. Thank you Sara!!!!

Just watched the video and was able to rethread it right the first try! Thank you so much for such a great video that was very clear to see and hear.

Thanks, you helped me so much from out of the box to sewing!

I didn't get the lower looper (blue) steps for 9, 10, or 11. I'll have to see another video on this, but I am happy that you all posted the series for this serger! thanks! I'll be back for the rest of the video and the other parts of this serger series

You video was so simple to follow. I was nervous about being able to do it but yay I did it!

Okay I have to have one of these sergers!!! You are an excellent teacher!!!

Really great video... thanks

The other taught how to thread wrong but you were awesome.

What a great tutorial. Thank you

This was sooooooo helpful. Thank you

Your videos are not only great, but a life saver too!! I have a new Brother 1024D serger, and I'm just learning how to use it. If using the smaller spools of thread for the needles, do you just use "all purpose" sewing machine thread? I've only found serger thread sold online, that only come in cones, that are around 2000 or more yards. Thanks so much for your wonderful tutorials!

Thank you so much for sharing!

Thank you kindly! 🎉 it worked ~ 2023

excellent video

How do I watch your videos BUT only the serger brother 1034 VIDDOS ⁉️⁉️⁉️⁉️ Every time I go to play them I have to Hunt Please help me Since you are SUCH A GOOD TEACHER ❣️❣️❣️❣️

great series!!! im curious why you didn't mention the little switches above the wheels intended to open the tension plates. its how the manual says you're supposed to drop in the thread while moving switch to the right to open the plates before dropping in?

Thank you so much for the video! I could finally thread my machine only after watching your tutorial!

Thanks very much ur the best

Hi, Can I use sewing machine thread on my serger if I don't wanna use all four same serger thread

I just got my 1034D and that lower looper has been a challenge! I was trying to get it into the part behind where the groove is (now that's a terrific description!). So I've watched some videos and some are saying that when the upper and lower loopers are threaded, the blue lower looper thread should cross over/on top of the green upper looper thread. You didn't do that. I'm wondering if it works both ways. tks!

Thank you so much

Me gustaria que lo tramitieran en español

How do you get the thread through the needle so easily, particularly the right needle?

I have a question, I recently bought the Brother 1034D and it didn’t come with the spool holders only the circle holders like you were showing for the smaller spools of thread. Do you know if you have to buy those separately? Thank you for your help

Dear Sister, thank you so much for your explanation. It is very helpful. I have purchased recently this machine and the sound is so loud. Is there any method to reduce it? Please say something.

Help! Your tutorials are amazing...and it's why I could attempt to thread the machine...but having followed your instructions and everything being great, when I do my test piece the upper looper thread breaks every time after about three inches of serging. I am using Coats Sure Lock....is it the thread???o thanks!

Does anyone know why my left needle won't sew. It's just loose on the fabric.

where can i buy quality thread

What was the name of that thread you used?

Not everyone can afford to purchase quality thread 🧵😒

Thanks so much for the video, it has been so helpful!

Confused - is this just a typo or am I watching the wrong video? The splash screen at the beginning of this video Says Btorher 1043D Series, not 1034D.

how many that machine cost??

Sera q no lo pueden hacer el video en español

I am much less intimidated by my new serger since watching your video. I wish I had watched much sooner. Very nice job explaining the machine. The manual was not very helpful in my opinion. Thanks so much!

If the lower looper thread isn't threaded through and under the upper looper arm will it stitch or does it need to be fed under the upper looper arm?

❤️❤️❤️❤️

nope notcworking for me … so frustrating!

TLDR. you can skip to 5:30 where the threading actually starts.

Watch all 33 episodes, order a serger, watch them again while you wait and you will ask yourself a week after it arrives "WHY did I WAIT SOOO LONG" BTW Threading is WAY easier than it looks.

I really, really grateful to you , for this precise threading video . I bought my serger machine on 2017 , by that time I had never found one like what you show to us until today. Thank you very much indeed

Thank you so much, I'm a visual learner and this made it so easy