Brother ScanNCut Makes Appliqué Easy

Рет қаралды 31,781

Күн бұрын

This video shows how to cut Appliqué designs the easy way with the Brother Scan N Cut. The friendly staff at Moore’s Sewing Center will be happy to assist you. You can read my blog here: www.moores-sew.com/using-your...

Пікірлер: 35

@edpalmieri3470 7 ай бұрын

Hi you did another great job, I have multi needle machines and the Scan and cut 330D. I did not take up embroidery until November 2020 at age 65. It has been fun and a great hobby. I served 20 plus years in the service and am 100% disabled vet. I used to play golf and sports but after 17 surgeries I needed a hobby that did not require to much movement. Your videos have helped a lot. thanks

@sherrikoers1438 4 ай бұрын

thanks for your service😀

@cherijones4856 3 жыл бұрын

Thank you so much for this video. I’m going to try again. I don’t think I’ll fail this time. You’ve made it look so easy, you’ve also shown every tiny step, thank you! This Nanna needs all the help she can get!

@kmsew11 3 жыл бұрын

Loved this, answered my question "how to un-group"!

@nuznannie 2 жыл бұрын

Very, Very Informative!!

@susantarallo2496 3 жыл бұрын

Strange that someone would give thumbs down 🤨. Sometimes people are very negative. Thank you Terry for this video. It answers a lot of my questions

@terrymaffitt4012 3 жыл бұрын

No worries. There are people who don’t like a video because they do something differently.

@petmomful2260 3 жыл бұрын

Thank you so much for this great instructional video. I have not used my Scan N Cut for fabric, but I am going to try it today!!

@susanrudman2693 3 жыл бұрын

Thank you! Can’t wait to try this out!

@pattishelton3169 2 жыл бұрын

Just getting started thank you

@stauniqueprintwear2705 3 жыл бұрын

I need this! Great video😊

@magorzatakurowska38 Жыл бұрын

wow

@gerigibbons3809 Жыл бұрын

MASSIVELY helpful. Have a couple of appliqué designs I’d like to cut with SDX230D rather than trace freezer paper templates!

@sonjabowling3876 3 жыл бұрын

Thank you , Terry

@barbaraedmondson1596 3 жыл бұрын

Thank you!

@craciopio 2 жыл бұрын

Ok so hep… I just got the DX and am planning on cutting my first appliqué tmrow… I have a fabric mat Nd fabric blade… so all I need to do is ‘starch’ my piece vs. heat and bond? LOVE IT thankyou! I’m putting the appliqué on a pillow case!

@ellexusse 2 жыл бұрын

Super helpful! I have been curious about how this machine works for appliqué and if it will save me time

@mphailey1 2 жыл бұрын

Thank you for the video - I just received my scan and cut DX and it came with the standard mat. I removed the backing of the heat n bond lite instead of leaving the paper on -and put it directly on to the mat and all the adhesive is now sticking to the mat and I can’t use it anymore. I tried leaving the backing on and nothing is sticking now and keeps bunching up and stopping the machine. I used some baby wipes try to clean it up but that’s not helping. Do you know how I can clean off the adhesive and salvage the mat? Thanks!

@lsarnp620 Жыл бұрын

Terry I love your videos. Can you please do on on cutting wool with the scan n cut..How do you stabilize the wool so it does not shift around

@spons115 Жыл бұрын

Yes, I would like to know that too. Can you use wax paper to stabilize the wool felt?

@spons115 Жыл бұрын

I just tried wax paper and parchment paper and neither one worked. 😊

@lsarnp620 Жыл бұрын

@@spons115 I have used heat ND bond light on the standard mat..with the paper heat and bond facing the mat and works ok..sometimes I have to cut it twice.

@karenhorvath8056 Жыл бұрын

Do you enlarge the designs at all? I am afraid they cover stitching would miss some part of the piece.😊

@carolflynn5381 3 жыл бұрын

Great Video, could you possibly do a video on incorporating the simply applique module part of the BES4 software, canvas and scanNcut please x

@terrymaffitt4012 3 жыл бұрын

I don’t own Simply Applique but I can produce a video showing how to use applique with BES4, canvas and ScanNCut. I also recommend watching the free videos from Cindy Hogan from Brother. Follow Brother Sews on Facebook.

@bjatnip3217 Жыл бұрын

Can you use heat and bond on the fabric mat?

@maryfromthemountains 2 жыл бұрын

I used my fabric mat and the paper from the heat and bond stuck to the mat. So, I took care of that problem and then tried it without the paper and the gluey stuff stuck to the mat. Do you know of a good way to clean that up?

@mrsresinvaleriepayn5203 10 ай бұрын

I am yet to purchase a machine, as I wanted to know that it could fussy cut flowers from a floral material. Of all the videos I’ve watched, yours in most informative

@tampabaylisa6151 8 ай бұрын

I did a class once where we scanned in a piece of floral paper and then selected a flower and cut it out. It was so cool! You can do the same thing to fussy-cut fabric!

@vickijeanne9958 Жыл бұрын

I don't have an actual file, I just have sizes of all my pieces that I need to cut multiple pieces, is there a way that Brother ScanNCut can take picture of the design & I can put the sizes in the edit?

@judymerbitz8716 3 жыл бұрын

what does it mean when no cutting line data is shown?

@terrymaffitt4012 3 жыл бұрын

It means that the design doesn’t have the Brother thread color coded as an Applique Cut Line. This thread color appears in the Brother Country and Brother thread chart on the Luminaire, PE Design 11, BES 4 and other machines and software.

@susantarallo2496 3 жыл бұрын

Are you saying if I use the fabric mat, you can’t use Heat n Bond?

@terrymaffitt4012 3 жыл бұрын

You can use Heat and Bond with the fabric mat but I wouldn’t remove the paper. I would test it with a built in image and try it paper side down and fabric side down (reverse image). The paper will dull your fabric blade quicker than just cutting fabric.