We have been back to Heathcote Park Raceway now, so time guesses have closed. New video will be out soon to show what time we ran and announce the winner, and thanks to all those who entered!

about time someone has gone deep into a na turbo setup

If I’m slower to reply to comments than normal, it’s because I’m away on holidays getting fatter and probably sunburnt! Hope you enjoy the video and I’ll try get back to everyone when I can 👍

Awesome to see more NA turbos being done, i made 411kw at the hubs on mine and wasn't able to kill it!

I’m at 173rwkw with mild mods on a n/a Barra 182. Great engine! Basically current level petrol engine tech (dual vvti level, Honda I-Vtec level) from a car built in 2005 once I got the bf cam control flashed into it. 13.15 is my guess

Great work mate, well done

Great video Browney, am in the process of converting my ba and have been following your vids as a guide, keep it up hope the car goes well on the strip and is good fun for you in the meantime

Loving the build keen to see more of your e series. Reckon she'll push 13.543

13.851. Great work on the project!

Great job

Very nice car dude , My factory turbo is the same "Envi green" colour and even had the same wheels (factory option from new)-wheels got work-hardened around 350,000km and the motor now is up to a shade over 407,000km without being opened. Mines a BA2 turbo "bitza" according to Fraud NZ, has later motor in it apparently but no real telling without pulling the thing apart. i made a custom Snorkel into the airbox under the headlight and its had the same washable air filter in for 15 yrs-extra intake made a world of difference by the way. It was doing 1000 km a week open road, driving until about seven years ago when I had to retire a medical grounds, which wasn't such a bad thing because my 2005 with 407km on it will now have time to gain some value as the years catch up with the kilometres lol. Every single suspension and differential bush and joint has been changed and drives like a brand-new car. Only people I let near it are fraud nz since I'm not able to work on it, myself any more, but they tell me it drives better than any of the new stuff. Specially since I did all the suspension bushes and joints. Being retired even more this year as I'm going to be using my new transit Mobility van-couldn't get the M sport one, so I am looking at a tune from Europe to get me the same power-Oh yes, and turn off that totally pointless ad blue system. Look after the barras boys, the yanks and euro's are onto them and they are starting to get pretty scarce! Probably more F6 Typhoon's around phone stock B series turbo's!. I love the idea of taking the Na or Gas motor and building a turbo motor from scratch, Fraud Aussie did us a big favour keeping certain things common just a shame they never made it a crate engine-I reckon one Would easily be persuaded to go in the front of the transit lol.

14.55 Sec @98.50MPH

As always another great Vid. Here's to a 14.153 second pass

Love the work Browney!! My guess is that it'll do a 13.955 at the drags

Ayyy Maxx performance 💪🏽

well worth the wait. hoping it is quicker than a factory turbo at about 14.2 my guess with you building boost on the line ( once i got the handle of it on my BA turbo I went from 12.8 to 12.4) 13.96. either way shes way more fun aye. im all in for you showing the track uncle Rodney so yep lets see it tuned to 250RWKW

Love it mate, stoked that she's been run up solid. With that torque I'd say you might just get into the 13.9 range.

Really love the videos mate watched all your falcon videos

14.069 Well done mate!

Awsome job mate my track time guess 14 second mark ever way its awsome progress

Great vid mate. I reckon she'll go a 14.2.

On my xr6t with a BF2 turbo motor, it was recently retuned. 10psi maxing out stock injectors and pump with a throttle limit, it's making 248.3rwkw at about 5k revs, and nearly 700nm at 2600 rpm.

Loving the build I recon it’ll do 14.11

Hey mate, killa video! My prediction is it will go 14.22 down the 1/4 mile

13.611 had to revise my times forgot about the cars weight lol. keep up the great vids

Thanks for the very informative video mate. Im considering doing this to my 07 Futura wagon to help with heavy towing duties. I'm not interested in 0-100 or quarter mile times, I simply want a heap more low rpm torque. It's either this or engine swap for factory turbo motor.

I think you're in the mindset to squeeze a little bit more from it so might as well do the injectors and boost controller. Been an awesome build so far

awesome

Love your work Browney! Im thinking 13.4. Good luck brother.

Mother trucker that made it WAY faster off the line!! Very happy for you man, I’m going to go for 14.12 I hope it’s under though!!

Firstly I must say a huge thank you for the hoodie and T shirt. They are great quality too! The hoodie is awesome and by chance I am wearing it now. Turned up perfectly to keep me warm for this cold snap. I'll try the T shirt in the warmer weather. If I didn't win these I was going to at least buy a hoodie. Very pleased with guessing the power. I'll have a go at the 1/4 mile time and reckon you'll crack the 13's with a 13.987. I wouldn't know the speed though. I'll see if I can make it up to see you race it. Would be good to meet you too. Enjoy your break and Thanks again!

Awesome stuff!! Great to see it running and tuned. Hard to guess the numbers as it was on a different dyno but I reckon 14.515@101.35 will be close to the mark.

my daily was a 300kw n/a+t and was probably the nicest daily i’ve had, extremely responsive i found

Done well matey.well i almost got the kllawatts right lol cheers to whowver gor the merch..ok lets try again 13.9 sec on the strip.. Keep the great vids rollin Browney...John..Willaura..😎

I put a Vortech V2 on my old BA XT ex police duty car. You can make good power & torque easily & safely if you arent chasing Horsepower Heros level of power (307kw on a stock unopened bottom end, with only cams & oil pump done on my old Barra 180). Besides the supercharger kit, the only mods i did were: Cams Oil pump Engine oil cooler (thermostat style). I had a lot of fun in my BA, ran some good times, made good safe power, great cruiser, regular engine services & TLC= reliable car

I reckon 14.247, good to see another upload on this build love to see it

Hey Browney, love the videos mate I’m guessing a 13.96 🤙

Guessing 14.4. Done well; enjoyed the series so far.

now its as fast as a stock xr8 good job haha!

Hey Browney love your vids mate I reckon she will run a blistering 13.895 Send It 😁

Hi Browny good luck Sunday at the track

awesome vids mate! inspired me to do the same to my NA BF XR6 😃 keep it up ! 🤙 my guess is 13.869 🤙

Really great job putting it together please do valve springs before turning it up you can hire the valve spring tool.

Well done on a nice budget build. 14.26 secs @ 101 mph

gd wrk

So cool. She's come a long way. Be awesome to see your older Falcon get some mods - lsd?

my bf xr6 turbo zf 6 speed valve springs 1000cc injectors 4'' dump pipe walbro intank fuel pump plazmaman stage 2 intercooler STOCK BOTTOM END 320rwkw 680nm of torque and a lot of fun to drive

Well done mate, great results so far!!! I'd tend to be on the conservative side of things considering those spaghetti rods - I'd just sort out the boost controller (probably with a turbo ECU) and call it a day (with your stock engine). If you want to chase higher power output, the NA LPi engine has the same rods as the turbo engine!!👍 A great series of videos with heaps of details on the "why"!!! Looking forward into seeing your results at the track as well as what you've got installed for us next!!!👌

Live the vids, wish I had the funds to do mine. My guess will be 13.623

'Fat kid with a cupcake' I'm proud to get a mention 😅😅 I should bring my completely stock (cough cough) road bike down for a race on the quarter 🤣 Nar way to cold for me but I do want a toolbox sticker. Great camera placement in car to avoid the speedo as well 😅 Another great video man, no idea about times just go 13 flat.

Those old school pull the air filter out and cutting a piece of the gate spring to try find tune 😂😂 fuck I miss being broke and not having a fukn clue what we were doing and no bloody KZfaq to help us we had to go to the library to use the internet and read forum chats 😂

Browney top vid as always!!! 🍻👍 Gonna go 13.997 break the 13's !!! Spewing I can't make it on the 3/7 the esky would have looked good with a Browney on it

13.777 Good luck!

Thanks for a more chill motoring box walk through where it's not some adhd bloke vlogging and blasting loud rap trap crap over everything

Great job Browny. Your video’s are all ways excellent and very informative. What was the 0-100 figure you have been able to get out of it with the new setup? That seems to me to be the gain you can use everyday. Thanks in advance for your efforts

Hey Browney, Excellent video as usual mate, My guess for the 1/4 mile is 13.712 Unfortunately I won’t see you there as I’m in WA 😁👍

Been an enjoyable series.. you have inspired me to do something similar! My guess is 13.911 👌

Get a good launch and I reckon you should get a 13.789. Floor it buddy.

Great channel Brownie very helpful what is the go with the oil pump on the Barra I herd they needed to be up graded too or is that only on the older Barra engine.

wild guess and say 13.9

If calls to action made power you'd have 900 rwkw

13.869 second quarter.

Love your work bro! I'm going to be doing a turbo set-up on my fg g6e but want to change the rods before i go abit to crazy, what would you guys recommend about getting new rods ? Fg g6e 2009 model.

Yeeewww 14.21

@0:47 what a a driver sees when driving through traffic in a turbocharged barra

Valve float at top end

I just did a turbo conversion on my 06 bf falcon, made 306kw on 12psi and it's 100% stock motor I didnt do any valve springs or oil pump etc, I love the power but not the gas bill as it's my daily and I cant help but hit boost and listen to the wastegate screamer haha. Next mod is getting my 4spd gearbox built

265hp and 12.980 1/4 102mph

Awesome series I have just found and watched I’m gonna guess 13.836

Oooosh

Hey brownie nice videos How I can fix my beake light issue ad I check fuse and changed both brake globe as well. Guide me on it. It's much appreciated TIA

12.8 on the drag strip

I have similar goals for an NA FG motor -- one big problem is I'm across the world from you at this time -- the engine is going into a 2000 Mustang and I'm also a newb to doing anything with a turbocharger. I've literally purchased nothing for the build yet so I'd be very interested in your recommendations if you could possibly spare some time.

Bronwyn I think it’s going to go 14.2. Good luck buddy

14.40 for the new setup

13.56 1/4 🤙🤙

Do the ba xr6t 4fa come out the factory with and LSD? Thanks

1/4mile time I'm guessing around 14.250 @98.75mph

NFI what you will do on the quater, but i am looking forward to the vid 👍

Mistake was the small FG turbo,they just don't work as well on B series especially on stock intercooler/intake piping.

I’m doing my fg conversion aswell! My guess is 14.117

Nice job editing! I reckon about 14.483

13.678 I feel for the quarter mile time

Did you get ceramic paint protection in the thumbnail your car looks absolutely amazing

14.1

I think you’re gonna run on the quarter-mile 11.234 👍👍

Browny I'm guessing Low 13s Mate

Yeah my NA Barra gets about 14.6L per 100ks

13.5seconds!

Love this series, More please. Time 13.8222

Mo powah

Turn it all the way up and see what it is capable of

Im guessing 14.010. 8mpg, that's not petrol that's an EV, mines sitting right on 😒 41... Great stuff Browney 🤙

13.846

13.923

13.726

14.124

14.386 but I hope you get into the 13s.

14.015

My guess is it’ll do a 13.7 to 13.9 depending on conditions and if the btr doesn’t do btr things