Brush Glazing on the Pottery Wheel with the Precision Applicator Trick

Рет қаралды 4,056

3 жыл бұрын

Using a Precision Applicator and a Brush to Glaze Your Pottery Saves a lot of time without having to constantly dip your brush. Follow along as I show you how it's done
Tools, Supplies, and Links Are Listed Down Below in the 👇 SHOW MORE SECTION 👇
-------------------------------------------------------------------------------------------------------------------------------------------------------
❓ Question
Have any Questions, Comments, or even suggestions for Future Videos
Feel Free to Post them in the Comments Section.
Don't forget to 👍 and Subscribe! Turn on Notifications (🔔)
-------------------------------------------------------------------------------------------------------------------------------------------------------
🎯 Disclosure:
Some of these links go to my website potterycrafters.com and some are
affiliate links where I'll earn a small commission if you make a purchase
at no additional cost to you.
🎯 As an Amazon Associate, I earn from qualifying purchases.
-------------------------------------------------------------------------------------------------------------------------------------------------------
🔷 Tools and Supplies Used in The Video 🔷
Clay
✅ Amaco A-Mix #11 Stoneware White Clay
geni.us/hZeg (Amazon) (Blick)
Applicator Bottle
✅ Xiem Applicator Bottle
geni.us/7q7qVM (Amazon) (Blick)
Brushes
✅ Transon Round Tip Brush Set
geni.us/lEsVpRS (Blick)
✅ XDT 2856 Hake Hog Bristle
geni.us/ywubcs (Amazon)
Glazes
✅ Amaco Obsidian
geni.us/Mu3T (Amazon) (Blick)
✅ Amaco Indigo Float
geni.us/QjIMp (Blick)
✅ Amaco Seaweed
geni.us/YHZk (Blick)
✅ Amaco Marigold
geni.us/AOJK (Blick)
✅ Amaco Deep Firebrick
geni.us/uwZgyMN (Blick)
✅ Amaco Cosmic Tea Dust
geni.us/N9iAy8 (Blick)
Tools
✅ Gloves Latex
geni.us/LxBrG (Amazon)
✅ Pottery Wheel Brent CXC
geni.us/VFbap (Amazon) (Blick)
✅ Amaco Wheel Bat
geni.us/lwHo8Wb (Amazon) (Blick)
✅ Handheld Blender
geni.us/tAleNFo (Amazon)
✅ Wax Resist
geni.us/uuKZe (Amazon)
-------------------------------------------------------------------------------------------------------------------------------------------------------
🔷 Bonus Material 🔷
👉 Watch - 21 Beginner Glaze Questions
• 21 Beginner Glaze Ques...
👉 Watch - 21 Tips for Brush Glazing
• 21 Tips for Brush Glaz...
👉 Watch - How to Bubble Glaze
• How to Bubble Glaze Po...
-------------------------------------------------------------------------------------------------------------------------------------------------------
🔷 Tools in My Studio 🔷
Hand Tools
potterycrafters.com/recommend...
Glazes
potterycrafters.com/recommend...
Brushes
potterycrafters.com/recommend...
Favorite Clays
potterycrafters.com/pottery-c...
-------------------------------------------------------------------------------------------------------------------------------------------------------
All Music potterycrafters.com/MUSIC is used in strict compliance with the appropriate permissions and licenses required All Music is Licensed through artlist.io/ and in accordance with the KZfaq Partner Program, Community guidelines & KZfaq terms of service.
Sponsored videos and brand-sponsored content on this channel will be clearly disclosed within the videos and/or descriptions.
-------------------------------------------------------------------------------------------------------------------------------------------------------

Пікірлер: 67

@maryjeanallen6189 3 жыл бұрын

Fabulous video, yet again, Marie! I always learn so much from you, and in a couple more months, hopefully less, I will FINALLY be able to try everything out that I've learned from you! So grateful for everything you teach in your videos and also your website! Thanks again!

@PotteryCrafters 3 жыл бұрын

Thank you so much Mary Jean 😍 That's great news. It really is fun and faster to glaze on the wheel. 👍😊

@kupcads6470 3 жыл бұрын

Thank you Marie I'll try this week now🙏👍

@PotteryCrafters 3 жыл бұрын

You're welcome 😍 Makes brush glazing more fun to do 😊

@spamb9399 4 ай бұрын

Hi from Wales, U.K. I've just started a pottery course, can't wait to get to the glazing stage. Thanks for a great video. 🖌️🎨

@PotteryCrafters 4 ай бұрын

That is GREAT! Welcome to the wonderful world of crafting pottery. Happy to help you on your journey. 😊

@davefrye5642 3 жыл бұрын

Some really good ideas, thanks

@PotteryCrafters 3 жыл бұрын

Glad you like them! Thanks Dave😊

@friendlyreminderbyronni 3 жыл бұрын

Awesome!

@PotteryCrafters 3 жыл бұрын

Thanks!😊

@jackiemorrison6024 3 жыл бұрын

Beautiful bowl!! Im a newbie struggling to center on the wheel. But Ive had fun with handbuilding

@PotteryCrafters 3 жыл бұрын

Thank you 😊 I do have a video on centering if you decide to throw on the wheel. kzfaq.info/get/bejne/m896msKFma-UfIk.html I also have one on the 11 problems you may have with centering. kzfaq.info/get/bejne/fbGDaKp6x5jOaGg.html These may help. I remember when it took me longer to center then it did making the pot 😆

@vickivanriel3082 3 жыл бұрын

Hi there I'm Vicki! Marie and I have been friends for a very long time ... I love her videos. I learn something every time I watch. I love supporting her

@PotteryCrafters 3 жыл бұрын

Thanks so much for your support Vicki 😍

@geetahegde7840 3 жыл бұрын

Hi, I'm Geeta from Mumbai, 🇮🇳!! Love your easy to follow techniques!! Thanks for sharing!!

@PotteryCrafters 3 жыл бұрын

Hi, Geeta Thank you so much. 😍 Welcome to Pottery Crafters KZfaq channel. So glad it is helpful 😊

@duuudy 3 жыл бұрын

Hi Marie, love your videos! I'm a Latvian designer, based in Denmark. For future videos, I would love to see how to build larger sculptures, and I'm also very interested in slipcasting / molds. :) All the best!

@duuudy 3 жыл бұрын

Also, I'm interested in how to add a foot (or trim a foot) in handbuilt pieces that are a bit assymetrical on the rim :) and marble technique with either underglaze or with wedging two colors of clay

@PotteryCrafters 3 жыл бұрын

Thank you very much for those fun suggestions. I put them on my list. I do have a video on trimming a foot on the wheel that may interest you kzfaq.info/get/bejne/ed-llKVpyMfQf30.html

@PotteryCrafters 3 жыл бұрын

Thank you! Wow, designing is great. Thank you for the suggestions I will put them on my list.

@kathyseeley6522 3 жыл бұрын

Great video! I’ll definitely use this technique when I glaze next. Do you have several applicator bulbs, or do you clean the same one out between each glaze?

@PotteryCrafters 3 жыл бұрын

Thanks, Kathy. It is fun to do. 😊 Very good question. I clean out the same one. I was just thinking of getting another one to make the process go a little faster. 😀

@suejago8113 2 жыл бұрын

Im loving your videos. Thank you for sharing. I was wondering how you have the pot or plate stay still on the wheel? How do you stop it from moving?

@PotteryCrafters 2 жыл бұрын

Thank you, Sue. Good question. The pottery stays on the wheel because I'm not applying too much pressure with the brush. Plus the pot does not have to be exactly centered. If you do happen to push your pot too far off-center, just stop the wheel and push it back in the center. It is a fun way to glaze. 😍

@suejago8113 2 жыл бұрын

@@PotteryCrafters Thanks so much Marie.

@PotteryCrafters 2 жыл бұрын

You're welcome Sue. I forgot to tell you when I did the banding glaze on the plate I had to center it and was carful not to make it move 😍

@friendlyreminderbyronni 3 жыл бұрын

I wanna learn how to use speckled glaze and do half speckled glaze and have just clear glaze on a mug but I don’t know if I have to clear glaze the whole thing to make it water/heat proof

@PotteryCrafters 3 жыл бұрын

I have a speckled underglaze video you may be interested in. kzfaq.info/get/bejne/pdCGg6RyxK3WaZs.html 😀 Hope this helps

@katlady5000 3 жыл бұрын

This is clever.

@PotteryCrafters 3 жыл бұрын

Thanks and It's fun to do 😊

@katlady5000 3 жыл бұрын

@@PotteryCrafters I'm definitely trying this next time I glaze.

@jacquelineengelen3345 2 жыл бұрын

Bedankt voor jou duidelijke uitleg ik kan nog veel bijleren groetjes Jacqueline……België

@PotteryCrafters 2 жыл бұрын

Dank je wel, Jaqueline. België! Wat geweldig. Groeten uit Las Vegas. Heel blij dat het heeft geholpen. Ik heb 99 video's om uit te kiezen. Dat kan helpen. Hier is de link voor je. kzfaq.infovideos Thank you, Jacqueline. Belgium! How wonderful. Greetings from Las Vegas. Very glad it was helpful. I have 99 videos to choose from. That may help. Here is the link for you. kzfaq.infovideos

@mikigoldwasser Жыл бұрын

Thank you very much from Israel

@PotteryCrafters Жыл бұрын

Israel. How wonderful!!! You are most welcome.

@mikigoldwasser Жыл бұрын

@@PotteryCrafters thank you. I watch your videos all the time

@PotteryCrafters Жыл бұрын

That's great to know Thank you. 😊

@arnitalynch4154 3 жыл бұрын

Hi. I inherited my mother’s kiln and wheel. I absolutely love your videos. I’m having problems with my glaze crazing. Can you give me some suggestions? My kiln is a scutt with manual sitter. I’m glazing by brush.

@PotteryCrafters 3 жыл бұрын

Thank you Arnita. It's great that you are making pottery😍 There are several reasons for crazing. Let's start with a simple fix. Wait until your kiln is around 150 or less to open. It's best to slow fire. And do your clay and glazes fit? Are they expanding and contracting together? I had crazing until I waited for my kiln to cool down all the way and it stopped. Hopefully, this will help. 😊

@arnitalynch4154 3 жыл бұрын

@@PotteryCrafters thank you so much. I will admit it’s hard not to peek. Love your videos they are calming and have so much information. Keep making them please.

@PotteryCrafters 3 жыл бұрын

Thank you so much. I'm glad they help 😍

@almondduchess6636 3 жыл бұрын

Someday I’ll be able to afford a kiln and a throwing wheel and I’ll do all these amazing techniques.

@PotteryCrafters 3 жыл бұрын

That is great! 😍 Throwing, trimming, and decorating are all fun to do on the pottery wheel. 😊

@wwjd2134 3 жыл бұрын

What kind of wax resist is best but also cheap for a high school class?

@PotteryCrafters 3 жыл бұрын

I think the best is Amaco wax resist. It's great for the classroom because it is green and the students can see where they applied it. You can get it here geni.us/7c2XIG but if you want cheap you are better off getting a gallon. It costs much less and you will have a good amount that should last a while in the classroom. You can get it here geni.us/9Iju 👍😊

@sangeetadeepu8847 3 жыл бұрын

Pls teach the right way to add mason stain to clay.My stain keeps coming off.Thank you so much.

@PotteryCrafters 3 жыл бұрын

I have this video that will help kzfaq.info/get/bejne/iZaEm7agxqm7pqs.html it works great for me. I hope it will for you also.😊 I also have this one for colored slip that you may find useful. kzfaq.info/get/bejne/b5t7nsyo0bWzm6M.html

@bobm2331 2 жыл бұрын

Marie, Do you ever spray any glazes? AND if yes, do you thin them with water? I want to spray clear glaze but not sure if I need to dilute. Any help is always welcome, Thanks

@PotteryCrafters 2 жыл бұрын

You want your glazes to be the consistency of heavy cream. Here is a spray glaze post for you to read. Here is the link potterycrafters.com/how-to-spray-glaze-pottery-pottery-glazing-tips/ 😊

@bobm2331 2 жыл бұрын

@@PotteryCrafters Thanks and Merry Christmas

@lindatortorice9356 3 жыл бұрын

Hi Marie, is your regular practice to wear gloves when glazing?

@PotteryCrafters 3 жыл бұрын

Hi Linda 😊 Yes it is now 😀 after I messed up my bisqueware because I use hand lotion.

@alexandrafallows4899 3 жыл бұрын

@@PotteryCrafters wait, what happened with the hand lotion?

@PotteryCrafters 3 жыл бұрын

My hands get dry so use a lot of lotion. 😊The lotion got on my bisqueware and the glaze did not stick. So now I wear gloves when I can or make sure my hands are nice and clean and dry when I can't wear gloves. Like applying stickers or transfers. 😀

@alexandrafallows4899 3 жыл бұрын

@@PotteryCrafters that’s really clever - thanks for the tip!

@anitaagsteribbe7472 3 жыл бұрын

Hallo Marie, here Anita from Holland, can you show how to pull up a vase, i keep getting thin with thick peeces in the wall, thanks

@PotteryCrafters 3 жыл бұрын

Yes, I can. I have this video that may help. It's a smaller vase because it's for beginner potters, then the more you practice the bigger you can go 😍 kzfaq.info/get/bejne/ns57f5uQzci3cps.html How to Make a Vase on the Wheel For Beginners 😊

@anitaagsteribbe7472 3 жыл бұрын

Thx Marie, i will try, i like all your video's

@PotteryCrafters 3 жыл бұрын

That's great. let me know how it turns out 😊

@juliaabel5940 2 жыл бұрын

I have a question for you! When I have made something that I want to glaze all over (also the bottom) is that possible? So Yes, how? Thank you so much in advance!

@PotteryCrafters 2 жыл бұрын

Very good question Julia. Yes. the most common way is to put it on ceramic stilts. This post will help. Here is the link for you potterycrafters.com/how-do-you-glaze-the-bottom-of-pottery/ 😊👍

@juliaabel5940 2 жыл бұрын

@@PotteryCrafters thank you So much for your fast reply!! I’m going to try it very soon, Thanks!!

@PotteryCrafters 2 жыл бұрын

That's great Julia. If you remember. Let me know how it goes.

@cv-cq9ry 2 жыл бұрын

Yeah, how many coats are you putting on there? I thought glaze was limited to 2 or 3 coats?

@PotteryCrafters 2 жыл бұрын

Good question. I put 3 coats on and sometimes 2 to 3 more on the rim so the glaze flows down the pottery. 😊 The amount of coats is determined by how thick your application is and how stable your glaze is.