BTT TFT35 firmware upgrade - What you should know

Рет қаралды 96,400

Күн бұрын

In this video, I am showing you how to upgrade the firmware on your Bigtreetech TFT35 or similar display. First I am doing this with a pre-compiled binary from the manufacturer. Then we're doing it by building our own firmware binary from the original sourcecode files.
If you've missed any of the previous parts about the SKR Hardware installation, Marlin configuration or BLTouch installation, check out the playlist here: • Bigtreetech SKR/TFT
HARDWARE AND TOOLS
🛒 BIGTREETECH TFT35 E3 V3.0 Touch Screen (For Ender 3) - geni.us/btt35e3
🛒 BIGTREETECH TFT35 Touch Screen- geni.us/btt35
🛒 Bigtreetech SKR 1.3 mainboard - geni.us/skr13
🛒 Bigtreetech SKR 1.4 turbo mainboard - geni.us/btt14turbo
🛒 TMC2209 Stepper Drivers - geni.us/tmc2209
LINKS
Bigtreetech TFT Firmware: github.com/bigtreetech/BIGTRE...
Visual Studio Code: visualstudio.microsoft.com/
BTT TFT35 E3 V3.0 User Guide - github.com/bigtreetech/BTT-TF... TFT35-E3 V3.0 User Guide.pdf
BTT TFT35 V2.0 User Guide - github.com/bigtreetech/BIGTRE... TFT35 V2.0-manual-20200108.pdf
THE PRINTERS I USE: kit.co/danielcrosslink/the-3d...
MY MERCH: crosslink.io/shop
BECOME A PATRON: / crosslink
CHAT ON DISCORD: / discord
BUSINESS INQUIRIES ONLY (OR IF YOU WANT TO SEND SOMETHING) - DANIEL@CROSSLINK.IO
FOLLOW ME:
INSTAGRAM - / danielcrosslink
TWITTER - / danielcrosslink
FACEBOOK - / danielcrosslink
WEBSITE: crosslink.io
The Music I use: crosslink.io/es, AMAZING for KZfaqrs!
GEAR USED
kit.co/danielcrosslink/my-vid...
Disclaimer: As an Amazon Associate I earn from qualifying purchases.

Пікірлер: 115

@Byrkster 4 жыл бұрын

Your instructional videos are great! I just bought the SKR V1.4 Turbo an TFT35 TS. You helped out a lot! Thank you. Can not believe how much quieter the printer is now!

@janhendrikfranke 3 жыл бұрын

Is it quieter without a stepperdeiver upgrade?

@Byrkster 3 жыл бұрын

@@janhendrikfranke Yes very!

@javeza2008 3 жыл бұрын

Great content. Clear, concise and to the point. You just got a new subscriber. Keep up with the great work!

@bobstertime 3 жыл бұрын

Very helpful now I need to figure out how to get my Ender 3 seen with the board and touchscreen update. Thanks for the flashing info!!

@garycompanion7484 3 жыл бұрын

Daniel, your videos are very helpful and you are a pleasure to listen to. You literally could teach anything! Thank you very much.

@Crosslink3D 3 жыл бұрын

I appreciate that!

@garycompanion7484 3 жыл бұрын

@@Crosslink3D Well, now i have chosen this BTT TFT35 as you've demonstrated and connected it to a BTT SKR E3 Turbo. After all the firmware updates, my screen still shows ' No Printer Attached!''. This happened even before I updated the firmware. With the connections, there is only one ribbon cable and not two. It's connected to EXP 3 as I have discovered. This is because the BTT SKR E3 Turbo does not have the EXP 1 and EXP 2 connectors. Any thoughts on this one? Thanks.

@ColinWatters 4 жыл бұрын

Thanks for this series of videos. I'm about to do BTT 1.4 upgrade with TFT35 so they are very helpful.

@chlevnikdeathclaw9922 4 жыл бұрын

The update went smoothly, but then the terminal wouldn't find the connection to the main board until I refreshed the current firmware. I don't understand what's going on there. Still very happy it connected! Thank you for the wonderful instructions!

@theamateurmachineshop2150 3 жыл бұрын

Another very helpful video. was able to upgrade the display and love the new modern icons and display. Be awhile before I learn to code custom menus! Thanks!

@Crosslink3D 3 жыл бұрын

Glad it helped

@Evilslayer73 4 жыл бұрын

i just bought a tft 28 big tree tech and those screen are awesome :) My Geeetech A10 is a big upgrade! and the way you explain the set up is way easier !! awesome tutorial Daniel!

@Crosslink3D 4 жыл бұрын

Awesome! Thank you!

@Sam3532 4 жыл бұрын

Have to agree, stellar explanation 👌

@jaimevaldez3058 3 жыл бұрын

Thanks nice tutorial! I’ve been having issues with this tft and skr pro. I think that with your tutorial i should be able to solve it.

@timstothard5489 2 жыл бұрын

Wasn't what I was looking for but did find a surprise answer to another question so yes happy

@devinlehman8798 3 ай бұрын

wow... my goodness i have searched for WEEKS for a proper instructional on reconfiguring this. could not find anything. I attempted a flash for the SKR mini v3.0.1 on my e5+, was stuck on a blank screen for awhile, then i tried to reflash a few times, no it's stuck on "illegal app" or something like that, so i will definitely be trying this when i get home, thank you!

@devinlehman8798 3 ай бұрын

and...... it worked. All i wanted to do was make it work with klipper/pi, followed some bad instructions and flashed it incorrectly instead of just changing the display parameters in my printer.cfg....

@Theeslickness 3 жыл бұрын

Thank you thank you thank you! I must have flashed my TFT24 like 20 times with "Found outdated data" errors. Turns out Teaching Tech missed the config file part. That was critical!

@elettropedro 3 жыл бұрын

Thanks for your videos... really clear and complete!!! I'm waiting for something about Bondtech installation and configuration... I hope you can do it😋

@MostlyElectrolytes 2 жыл бұрын

Need to be able to give two likes for this one. Had tons of trouble trying to upload with the default procedure; compiling it and it works great. I can't believe that it's taken me like over a year to update my firmware and amazingly everything is actually working now....go figure.

@Crosslink3D 2 жыл бұрын

Thanks!

@gogameing6918 2 жыл бұрын

The 4:00 minute mark... Thanks so much! That fixed my error.

@jasonisoldi1584 Жыл бұрын

Great video, all your videos are so helpful. Someone else has already asked this but I was wondering is you could provide a link to the SLTs for display housing and mount seen in the video…

@tristanluc7008 2 жыл бұрын

Thank you so much for showing me how to edit the TFT firmware. the one they have is with the wrong build volume for my printer and i cant fix it until i show your guide.

@byseven 4 жыл бұрын

Awesome !!! Thanks. !!!

@georgbalbier5729 2 жыл бұрын

Danke für das Video

@MrSpeakerMBurns 4 жыл бұрын

I would like to see a video showing how to connect and configure the BTT TFT35 3.0 with a MKS Gen L board as found in the TEVO Tornado.

@ljs123 3 жыл бұрын

Thank You

@jensweimar 3 жыл бұрын

Hi Daniel, wonderful videos you are creating! :-) Maybe you can answer my following question: Is it somehow possible to show print status on the main screen of the TFT35 (in touch mode) e.g. current layer number, percentage ...

@lancman5630 4 жыл бұрын

Thanks for this, helped me a lot to update the firmware on mine. Out of the box I had no touch screen functionality at all. Now I have a nice shiny touch screen... BUT I can't get past the 'Printer not attached' error. I've tried every UART speed but it makes no difference. I'm using the latest pre-compiled binary from Bigtreetech and their new SKR Mini E3 V2 mainboard running Marlin 2, so they should play nice together at a UART speed of 115200. Any suggestions as to a possible fix would be gratefully received.

@BRxRanger 4 жыл бұрын

I have the tft35 e3 and a mini e3 V2.o working ATM so. So as some ppl are having trouble with the main board I'm just going to chill for a while.

@EnergySeeker 3 жыл бұрын

i converted my SKR to reprap but i have issue with my TFT 7" its not showing the RRF is there a way to flash it to show the RRF ?

@dend9566 3 жыл бұрын

Nice explanation, How does the start screen look with a dual extruder? Does it then showing 1 hot end or 2 ??

@altair_17 3 жыл бұрын

Hi Daniel, the video about the skr 1.2 is very difficult to found, is there any issue of compatibility or somthing else? Thank you for your great videos 👍

@maurofanni5354 3 жыл бұрын

hi, I need help ... I have installed the SKR Miniv2 and TFT35 in my Ender3 Pro, but when I modify the 1990 and 2076 line with Marlin 2.0 bugfix to switch from stock display to reprap full graphic, the compiler gives me an error. What am I doing wrong? Many thanks in advance!!!

@capthowdy126 4 жыл бұрын

the last bunch of videos u have released has almost be like ur releasing them for me. ive been building a kossel mini delta from scratch an i have the skr 1.4 turbo with the big tree tech tmc 2208 v3 an the tft35 e3 v3 an u have been a life saver along with a guy i met in the kossel mini facebook group. but i still have trouble understanding what all is needed to compile the firmware depending on what hardware u have. like if i want to use the newest marlin firmware an i get the firmware from marlins website, how do i go about getting all the board stuff into the firmware, or is it all done when i put the lcp1769 into the platformio tab. i got the printer working tonight finally got to see it move for the first time. an it has been a relief. im ordering a heated bed tonight an going to go ahead an hook the hotend up an make sure its extruding filament. still gotta come up with some kinda z probe so i can do the delta calibrations an hopefully that will help with getting everything lined out

@bobf3598 3 жыл бұрын

One thing i have noticed with the TFT70 v3 is it does not like you to change the temperature "On the fly" in Marlin UI. I tried to decrease the temperature, when i did, the printer stopped for a couple of seconds then inched a bit more an so on... With the TFT35 which i did use until now, that was not an issue.

@joeundreiner5810 4 жыл бұрын

Good Day Daniel. Thank you for your videos. They have been very helpful. I have installed the TFT35E3 on my Ender 3 pro. I have noticed that Automatic shutdown does not seem to function correctly. Do you know of a possible solution? Thank you for your time. Best Regards

@steve8939123 3 жыл бұрын

Hi, Great and easy-to-follow video. I have one problem I updated the firmware from TFT35 E3 V3.0.26 to TFT35 V3.0.27 now the touch screen won't work, the Marlin side works ok. Any thought of what happened? Everything worked ok before I updated.

@stiggybishope5449 3 жыл бұрын

i cant seem to get the touch screen to communicate with printer no matter which port i choose it work in marlin mode but not in touch screen mode can u help please

@g4egk 3 жыл бұрын

When I inserted the SD card to upgrade the firmware using the included SD card, the screen wouldn't see it. I used a Sandisk SD card instead, put the same files in the root and it flashed fine.

@fvheel 3 жыл бұрын

Nice tutorial for the 3.5 inch display but where can i find the 7.0 inch firmware?

@brianvalentas1121 8 ай бұрын

I have the tft70. I really don't like the GUI on the BTT tft. I like the text based menu. One day ill try and get use to it

@owlyakulyyagmurow3005 4 жыл бұрын

👌🏼👌🏼👌🏼👌🏼👌🏼

@ianofawai2797 2 жыл бұрын

thanks for the info, helped me to get it working on the SKR 2 I put into a DX02. Do you have any info on the menu setup? I can only see one fan (0) listed and controllable, I have three plugged in and the Marlin config.H fan# commented out. Still only gives the single fan to controll. Can't find any info re the menu setup beyond different themes. Best regards from NZ.

@feronium 2 жыл бұрын

Hi! If you wouldn’t mind, there’s 2 things I’ve been struggling with regarding the tft24 screen, though I believe it’s the same for all these screens. The first one is that whenever I leave the SD card inserted and restart or reset the printer, it tries to flash and gives me an ‘illegal flash app’ notification. Can I get rid of this? And secondly, I can’t seem to get the usb drive to work. The screen will detect the usb drive, but can’t read the content. Does this have to do with formatting the drive or is it a specific setting in the firmware? An answer would be greatly appreciated!

@BadneX_FPV 3 жыл бұрын

Super Video! ich suche gerade nach einem tut für die led Steuerung. Meine Fragen sind kann ich die am tft anschließen wenn ja wo und wie definiere ich es in der fw. Wenn nicht laufen alle über diese neopixel Option? Danke schon mal über die evtl Hilfe

@tonyoosen8692 3 жыл бұрын

Hi , i have the Bigtree Tech SKR-mini E3 V2.0 and the TFT 3.5 V3.0 installed in my Ender 5 Plus and keep getting the printer not attached info showing up , screen won't stay on long enough to scroll through the menu to change anything?? Any help would be appreciated.

@EnergySeeker 3 жыл бұрын

is it possible to change the TFT firmware for the TFT screen to be RRF screen

@3D_Printing 3 жыл бұрын

I use a Big Tree Tech TFT35 but unsure of which version to use; Is that a way to find out?

@kittrelleberwine 3 жыл бұрын

hey i tried to update my screen, after it updated it told me to calibrate the screen but I accidentally hit the reset button and now the screen is unresponsive in touch mode. Any advice???

@NightshadeKc 3 жыл бұрын

Thank you for this video. Do you have to constantly up date the firm ware if you just want to print or only if you mod?

@Crosslink3D 3 жыл бұрын

Modding is the main reason and bigfixes which happen quite often

@seangassin958 3 жыл бұрын

Weird question regarding the tft config that someone might be able to answer. I'm modifying my ender 5 plus to have a tft70 display and am wondering if it is possible to edit the tft config to use exp 1 for marlin mode instead of exp 3. Anyone have any ideas on whether that's possible?

@AaronWoodburn 3 жыл бұрын

There doesn't seem to be a .bin file for the TFT35 v2.0. I have not been able to make this work on that display - has anyone?

@toddcoello6461 3 жыл бұрын

I'm us6this with a skr 1.4 non turbo. On a geeetech a20m. When in touchscreen mode I try to swap fro E0 to E1 for extruding but it can't. But if I hold the button and go to simulated marlin I can load and unload each side. Any knowledge of this?

@mcdjacedad7359 2 жыл бұрын

hi mate will the BTT TFT 35 screen work on a MKS Base 1.4 v Mother board for a tevo non pro

@DrDiff952 2 жыл бұрын

So with this screen I use its memmory card port instead of the main board

@magicmanspaz 3 жыл бұрын

i keep getting illegal flash app. i had i working but once i updated it gave m this. i tried a few time to re flash and it did but then could not calibrate the touch screen. i reset and now again illegal flash app error

@worms32 3 жыл бұрын

While i printing via octoprint there is no printing action on screen. and there is no Babystepping menu. How can i solve this issue?

@georgealexandris5215 Ай бұрын

I'm having trouble with 3d printer biqu b1 saying it's not connected. Can you help me?

@ericcxxxx 2 жыл бұрын

link to the new mount with the reset pz

@benetton2010 Жыл бұрын

Changed the TFT35 folder into a .CUR but config remains an .ini and TFT35 folder remains a .bin any suggestions as it won't go into Marlin - using the TFT35 V3 screen so can you confirm which files I need to use as wondering if that's part of the problem.? thanks

@sliprock4139 3 жыл бұрын

Wi this screen work for the ender V2 for both modes?

@alessiotius283 4 жыл бұрын

Hi I have the same TFT model as the video and it gives me the error "Fade Height Off". I state that the firmware was given to me and I don't know how to edit it unfortunately, I would like to delete an ONBOARD_SD icon but I am not yet able. Regarding the error, I saw that through config.ini it is necessary to modify the "auto_load_leveling: 1" entry and set it to 0. The problem is that I removed all the other entries in the config.ini file because I don't know exactly what they would modify me from the installed firmware. When I put the config.ini file in the SD the TFT does not read it and I do not understand if it is because I have removed the other voices and if it seems strange to me. It can be a problem to eliminate the other configuration items, with the SD card I loaded the firmware so it works Sorry for all these questions but I put my doubts in one message

@1r3k1970 2 ай бұрын

Is there a way to change the filament in the touch menu? Is it only in 12864 mode?

@PalosX 2 жыл бұрын

Ive converted a jpeg to a bmp to try and change logo pic but it says error and wont except. I used the same name is there something I'm missing? Is there a max file size possibly? Any help is greatly appreciated and thanks in advance!

@benetton2010 Жыл бұрын

Followed your guides but WON'T go into Marlin ....? Any suggestions

@9TDF 3 жыл бұрын

It bought the tft 35 v3 and it isn't responding to touch or knob inputs.

@andreiotelea1486 Жыл бұрын

Hello. I'm trying to build a firmware for the V2 and i get all kinds of errors and it fails the build. I followed the exact instructions and it doesn't work. Can you help me?

@jespersrensen2997 3 жыл бұрын

can somebody please help me. after i update the firmware the touch dont work. when i keep my finger on the screen it goes to mode select but it does not register where i press is there a fix for this Best regards Jesper Sørensen

@PrismWarp 3 жыл бұрын

What am I doing wrong I have the BIGTREE_TFT35_V3.0_E3 Display. I downloaded the latest BigTreeTech Touchscreenfirmware Zip file. I extracted the zip file as instructed. I copied the BIGTREE_TFT35_V3.0_E3.27.BIN and the TF35 folder that contains the BMP and FONTS folder and a file called config_rff.ini to the SD card I renamed the config_rff.ini to config.ini I inserted and powered up the printer it goes to 100% updated but then I get a screen stating "Found Outdated Data" Config Update Required, Icons Update Required. Insert the SD card with the required files then hit reset button to update" The printer control board should not really matter right now correct since that would be step two on the installation of my BIGTREETECH Direct E3 RRF V1.1 32 bit Control Board. I was told to update the display first then update the firmware of the Control Board RRF. How can the files be Outdate they are from the same Zip file...?

@carltremblay2697 3 жыл бұрын

What case is this ? Link ?

@TheSitscha 3 жыл бұрын

HI there, i have an Issue, Board MKS_Gen_1.4 with Bigtreetech tft70_v3 , Display says "no printer attached" and in the "Info" System: Unknow system" I switched the "tx & rx" Cable so now they matches with the Board and Display. Baudrate is the same. The Problem is, i cant set any serial port on "minus" PlatformIO writes an error that "i cant set it on minus" It says: pasting "USART" and " -" does not give a valid preprocessing token. I dont know why im the only one who has this problem, everywhere i read that people set it on minus and it works. But I cant. Please help me Thanks

@mysteriouspikachuman 2 жыл бұрын

Is this compatible with the E3D Hemera?

@lasombra577 3 жыл бұрын

@Crosslink how do i override the logo file..?? i have tried with no luck...can you please give a brief explanation..thx for your time

@mickmarriott9453 11 ай бұрын

Would love to see an answer to this @Crosslink.

@BigKahuna611 3 жыл бұрын

I'm new to 3-D Printing. I have an Ender 3 Pro and just installed a TFT35 E3 V3.0 (software version 3.0.25.x dated June 15 2020) and a SKR Mini E3 V2.0. The TFT35 E3 V3.0 indicates NO PRINTER) . I tried changing the baud rate to no avail. I checked all connections.

@BigKahuna611 3 жыл бұрын

Problem Solved bad cable

@moistcement 3 жыл бұрын

@@BigKahuna611 which cable needed to be replaced? i am having this same issue thank you

@user-fy1iz4bz5z Жыл бұрын

Hello Daniel I was wondering where your 24v upgrade of the anet a8 went? Was it taken down due to legal issues?

@Crosslink3D Жыл бұрын

It's still available on my website www.crosslink.io/category/videos/anet-a8/

@wayneheil1578 Жыл бұрын

Hi Daniel. Hopefully you are still monitoring. When I try to build the firmware for the BTT TFT35_E3V3_0 , the build fails due to a flash size exceeded error. Any ideas.

@mundotec6261 Жыл бұрын

I have the same problem. Has anyone some idea to solve this?

@neodymium2007 Жыл бұрын

I give up, I've tried everything and it doesn't work and there's no help on the internet anywhere I read everything from the video and all the articles, but there is no solution I have TFT50 V3.0 (V27 softwave) everything works fine and is connected to btt skr 1.2 pro (no software inside yet) but as soon as I insert the config.ini into the TFT50, it updates and turns on, then beeps continuously for a few seconds and restarts in 30 seconds, and so on and on without interruption until I turn it off Can anyone help, I really don't know if I'm doing something wrong

@ileyp7583 3 жыл бұрын

Frustrated to the point about ready to toss the SKR motherboard TFT in the trash. Been trying to upgrade my Ender 3 Pro for a MONTH. I have the SKR 1.4 Turbo, TFT35 E3 V3.0, and TMC2209 steppers. I have followed all the videos and everything else I can find. Following the directions in these videos, the screen is blank. Switched the RS232 around like shown in the video, and then there is an image, but it flashes (not steady). If I arrange the cable so that there is a clear, crisp display, I have NO PRINTER ATTACHED and it has been this way for two of same motherboards and two of the same TFTs. Marlin mode appears to work...but I didn't waste all this time and money to have Marlin mode screen...which worked fine as it was.

@Crosslink3D 3 жыл бұрын

What baud rate setting do you have in your Marlin config?

@ViciousButter 2 жыл бұрын

Where can I find the STL for the cover over the screen?

@jasonisoldi1584 Жыл бұрын

I was wondering the same thing.

@sdelay3d 2 жыл бұрын

возможно ли дисплей тип TS35 использовать для 3д принтеров? он по цене более доступный и больше предложений у продавцов на Али. спасибо

@Crosslink3D 2 жыл бұрын

You could ask this on our discord channel: discord.gg/ne3J4Rf

@gruffnutz Жыл бұрын

Just fyi the ext cur does not mean “successfully” transferred, just transferred . Many times I have tried to upload or flas fw to a btt skr 3 mainnoard without any fonctional change to the board but still get this ext, in other words a failedflash. Also cur is a word for a worthless dog which is quite apt for btt products.

@stephenkosloff6081 3 жыл бұрын

hi - i have a bl touch - when homing it sends the x axis left and crashing into the side - any ideas - great videos

@Crosslink3D 3 жыл бұрын

Where is your x-endstop sitting. At the left side? Does it trigger?

@stephenkosloff6081 3 жыл бұрын

@@Crosslink3D all sorted - the xy was 8 so set to 120 and its fine = thank you

@RaminOhebshalom 3 жыл бұрын

Great Video Can you please try to compile the Marlin 2.x firmware for the Geeetech A30T

@TDHobbies 4 жыл бұрын

around 4:18 there is a message that says "Fade Height Off" how do you fix that? my printer is working OK but this message will not go away. I have gcode to display print time remaining and all I see is this message. Ender 3 Pro, SKR mini E3 v1.2 mainboard and this same display like you have here.

@tuckerjoe6785 4 жыл бұрын

In the config.ini set "auto_load_leveling:0"

@TDHobbies 4 жыл бұрын

@@tuckerjoe6785 THANK YOU!!! I found it! I was worried I had to go into the mainboard firmware as it's all setup and working good after many hours of frustration with that project (a whole other story LOL) Thanks for the reply, I got it working finally HAHA Now, to slice and print!!

@jirivaltr560 3 жыл бұрын

Links are outdated :(

@emendatus5013 4 жыл бұрын

The message no printer attached didn't go a way what can I try?

@moistcement 3 жыл бұрын

mine won't go away either, have you found a fix for this issue?

@emendatus5013 3 жыл бұрын

@@moistcement a lot off trying out switching the ports at dome point it worked. Also check if the pins are connected in the right order

@philiploreck5610 4 жыл бұрын

Hi guy, I tried to update my firmware on my skr tft24 v24 in the same way, but know my touchscreen does´t work. I hope somebody can help me. Philip

@carlandre3892 4 жыл бұрын

the same thing happened to me because i messed up upon screen calibration. if this is also ur problem, try creating a blank text document named "reset.txt" in the root of your sd card, insert, then turn on your printer, when prompted to calibrate, be careful and accurate. hope this helps

@dannyperkins4220 3 жыл бұрын

Has anyone figured out how to make the TFT 35 v3 touch mode comptable with the bl touch?

@LuisC202 3 жыл бұрын

Danny Did you ever get this to work. Mine was working and I flashed a new firmware and my BLtouch is now missing

@dannyperkins4220 3 жыл бұрын

@@LuisC202 no, but I have not given up either. There are settings in marlin configuration.h for the BLTouch. I haven’t got into the TFT 35 configurations yet. Thank you for asking. Danny

@painting4beginners890 3 жыл бұрын

how the hell do you level the bed ABL it way off what is baby steps what is z offset and when to use it this vid misses all the info i need.

@360maxpro8 2 жыл бұрын

AFTER WORDS WHY MY SCREEN BECAME UPSIDE DOWN?

@Crosslink3D 2 жыл бұрын

That’s sometimes happening after a new firmware update. You can reverse it again in the screen menu.

@chriswesley594 3 ай бұрын

It often amuses me how so many video introductions say "Let's get into it now!" or something similar, except they then go on to NOT get into it, but to promote something or ask for subs and likes. Nothing wrong with promotion and nothing wrong with asking for likes and subs, but don't pretend you're going to deliver the content with urgency RIGHT NOW then not do it.

@YahWho-is1tt 8 ай бұрын

I wish someone would have warned me, so as I'm here, I may as well attempt to warn anyone else who MIGHT be entertaining ideas like mine: the delusion that I could upgrade my old Ender 3 to run Klipper with a self-contrived "kit" that turned out to be MISGUIDED: because this TFT35 will absolutely NOT do its dual-personality switching with Klipper. It will only operate in the old 12864 TEXT mode; the color touchscreen with all its handy-dandy features will be of NO USE under the big K. Oh well . . . .