Thanks Michael- -that was an awesome amount of information. Hard to see how anyone without a tech background would ever work that all out.You did a good job of keeping the info accessible

You are very good at creating tutorials. There have been others where I could not figure out how they got from one step to the next. I appreciate all the hard work that went into this!

Thanks for the straight forward walk through. This makes building very simple even I managed to do it. Thanks to the marlin team as well for the add in!

thank you so much for making these videos. I don't think you realise how much you do for the community. Keep rocking!

I swear every time I get a new part for my printer you have a guide for it within 36 hours

This is by far the best and most complete Marlin tutorial I have found: Bravo and especially thank you. I was able to upgrade my CR10-S to Marlin version bugfix-2.1.x without any problem and I even added the zzz afterwards thanks to another of your videos. It's like having a brand new printer now. Thank you so much for your wonderful work.

Before I came across your video, I was worried that I may do something wrong and 'Brick' my printer. I followed your instructions, to the letter, and everything went smoothly. Many thanks for all content that you upload, it has saved time and money over and over again. Keep up the good work.

Thank you so much Michael.. this has helped me multiple times now after upgrading my S5 and one of my Ender 3s. Your instructions are always so clear and easy to follow.

This was EVERYTHING I needed. I have an Ender 3 but it was shipped with the 4.2.2 board. I almost tried the 8bit way thinking it was a normal Ender 3... Until your videos pointed out that this was actually a 32bit board. Thank you for taking the time, and giving such detailed instruction in ALL of your Videos!!!!!

Thanks for putting ALL this stuff together! Your tutorials are really incredible!

Aha, perfect! I have an SKR 1.4 in the Amazon delivery aether, this will be incredibly useful when it finally arrives

I have been trying to upgrade my Anet6 firmware - V1.7 board very long time without success. Thanks to your amazing guide I was able to finished it. I got my LCD display back . I have watched couple of your other videos, they are very informative and easy to understand even for beginners like me. Thank you very much.

this video just saved me after 5 hours of frustration. literally just trying to add a e3d v6 to my cr10 v3. such a hassle for someone that has little experience with code

This is an amazing guide! I highly recommend watching the entire video once or twice all the way through before doing anything. There were a few times throughout this process where I ran into issues which he explained 5 seconds after the point at which I was paused... (Close Cura because it blocks the COM port, for example.)

Just a quick thank you for putting this up. I've midified my printer enough that there's not an ordinary firmware I can download, so I had to compile my own. All went well but for some run out sensor setting (High not Low) and then an optical semsor defined when it didn't need to be (for me). Took some figuring out as to why printer wasn't working but I now know quite a bit more. Thanks again, videos are very helpful.

That was the first time that I had seen the "Auto Build Marlin" panel. I had just been clicking the tick-mark on the blue bar to compile and the right-arrow at the side to load the newly compiled firmware. On one computer, I could not install the Platformio extension until I had installed python. Thanks for the video.

A day after getting my skr mini v2, you come out with this. This is why you're best Michael!

Great video. Just getting into 3D printing with a hand-me-down AnyCubic Kossel Linear Plus delta printer. The original FW was really difficult to get my bed level and had additional problems getting the g-code to execute properly... After much messing around with the Arduino IDE, I finally switched over the VS code and setup like you explain in this video - perfection...! Thank you again, Clay

Best tutorials hands down. Easy to follow step by step and broken down in chapters makes it easy for any skill level! Thank you!

Michael that was a great, great video - I was flailing by myself and went step by step with your video and it went perfectly. Thanks a lot!

As someone who struggles with reading comprehension, I really appreciate this guide. Thank you

Went and looked at about 4 other videos before discovering this one, Easy to follow, clear concise instructions, and best of all it worked!!! I accidentally Blue screened my ender 3 Pro trying to flash the firmware using the bin from reality big mistake! this video saved my printer(Literally i was about to throw it out the window LOL). THANK YOU a million times!!!

Excellent video Michael! Got everything working great for my Ender 3 Pro with the BTT SKR Mini E3 V1.2! Thank you for your great work and I look forward to more great tutorials.

Thank you for this tutorial. I was going nuts trying to figure out how to update my Z_Max_POS after installing my Xtender kit for the Z axis. I was missing all the extensions. Your video is a lifesaver!

Genuinely, Thank you for these very informative videos. No other community like the 3D printing one.

I've been looking to do this for my Ender 3 Pro and Anycubic Delta Printer but I couldn't find an up to date video, THIS HELPED SO MUCH

Thank you very much for that detailed guide. Was finally able to recompile and upload a new firmware for my Sidewinder X1 to enable printing at higher temperatures after a few hours of failing. :)

MAN - You are the best !!! - I am watching your videos since my first ender3 - and every video of yours I see - you amaze me with the clearest instructions ever. Good on ya mate.

Even if I want to thank you, it won't be enough. The effort and elaboration are beyond what I was expecting.

I have not installed marlin firmware in a long time since Feb 2023. So I had forgotten how to build marlin in VScode. Your video got me up and running where other videos and websites just confused me. With all the configuration files you need to install, etc. or so they say.

Another fantastic Video! Just in time. :) Updates with all three, VSCode, Python, and Marlin itself rendered me unable to compile (2.06) Marlin configs. Thank you, Sir!

This is great Michael! I'd love if you did a video on this but for printers that don't have a premade profile on the Marlin Github. For instance a printer with a touchscreen interface instead of the typical dial.

Thank you! This was navigating blind for me, I have no reference with this sort of thing. I followed another video and was failing because my MacBook Pro (Me) was having a hard time figuring out how to upload with the cable. I'm kind of glad it didn't work because the build architecture was not correct for the newer 32bit silent board. Using your tutorial step by step I was able to find the correct zip files for the config, place them in the correct folders, using the correct build architecture in VS Code. Then using the .bin file it created, placed it on the SD Micro and it worked! It only took me a day...lol!!

I've been putting off moving away from Arduino IDE, thank you for making such a great guide!

Thanks for this. I skipped around the video, going over things I had already figured out, but I was able to use the video to fill in the gaps and build a perfect firmware for my ender 3 pro v1.5 with a bltouch! :)

this video, was spot on my guy! after stuffinf around with other videos and getting no where, this one popped up as a next in line, and i wish i had of seen this first!

Timely as always! Wanted to update my build as I've been using an old 2.0.x from way back last year. Sadly, didn't find any of the config files very useful as I have an old SKR 1.3, not one of the new ones, so still had to trawl through the configs copying over from my old build.

I never comment on videos, but you are truly a Saint! This was so helpful in getting my Sunlu S9 new and modified firmware(All metal hotend is now capable of 285c!) Thank you so much!

The Auto build Marlin extension was a great addition to my setup. Thanks!

Dude, thank you! I not only have custom firmware for my Ender 3 but I have learned a lot about vscode and github as well. You really do rock!

Thanks again for an excellent resource. I just received a BTT SKR V3 Turbo and am building the firmware. I had 2 fails and I moved the Firmware folder up each time, when I got to Documents, with just that folder, VS built the file fine. Hope this helps someone along the way.

thanks for updating this video and putting a pointer from your old one to here. That saved me a lot of trouble. Subscribed

Dusted off my Ender 3 after ~18 months of no use... this guide helped a lot with building new Marlin version. I have few mods (dual z, 1.3 board with TMC2209s, bltouch, new extruder), so had to go through entire configs looking for features I have been using... needless to day - I highly recommend having a file with all the variables that you have enabled and/or have custom values :)

Thanks alot! You sucessfully made me a Marlin programmer! :D By far the best broken down explanation for all of this in 2020! Cheers and a late Merry Christmas!

Thank you Michael, it is working well with me on Artillery Genius 3D Printer now it is marlin 2.0 . FYI (Artillery Genius): Just if you want to upload the file to your printer in the last step be Sure your printer is "turned off" and connected via USB.

Thank you. I've watched this several times and I finally compiled my own jyers firmware with a BTT smart filament sensor (used another video of yours for the coding) for my Ender 3v2. Down the road I'm going to try my hand at adding a SKR v2 and two Big Tree Tech closed loop steppers for the x and y motion on a Sapphire plus. Should be fun

Hi, sorry this comment does not bring information, but I'm so happy to have found these so clear explanations, in an english perfectly understandable for foreigners that I need to send a big THANKS !!

Thank you so much. I had the same problems and fix was perfect. I guess we are all on the same page with this upgrade.

Finally I got my Hemera install firmware working with this method!! I really appreciate it thanks again for a great video! 👍🏼👍🏼

Thank you for this video. I managed to upgrade the firmware on my ender 3 pro! I couldn't have done it without this video. Thank you very much!

Thank you so much for breaking this down into easily consumable portions.

This video saved my printer! I was running klipper and having terrible reliability, and I couldnt figure out how to switch back. Thank you very much

Excellent video, super informative! Just flashed my Wanhao i3 mini from 1.1.4 to 2.0 . It was super easy, thank you! You've gained a sub! As a techy you I feel the pacing is slow, so running at 1.25, or rather 1.5 speed is comfortable and engaging.

Let me start by saying, this is the best video on the internet to update the firmware on Creality 3D V1.1.4. Trust me, I may not have seen them all, but I've seen a ton and I must have 40 tabs open in my browser right now. However there are differences here from what I experienced. No .bin file after compile. All I was able to produce was a .hex and .elf. When I finally got Marlin bugfix-2.0.x to upload on my Creality 3D V1.1.4, as it turns out, I had to use melzi_optiboot. What is not on this video is a feature where after you click build in Marlin, you get four choices: melzi, melzi_optimized, melzi_optiboot & melzi_optiboot_optimized. As it turns out, for the Creality 3D V1.1.4 board, I needed to use optiboot. Maybe melzi_optiboot_optimized would have worked also, but once I got my printer back with thermal protection, there was NO WAY I was going to try anything else and jeopardize my printer again. Also, the first time you click build, you'll get errors. After it's finished, click it again and it builds fine and gives you the blessed "success" status. Over the course of three days, I probably spent about 25 hours getting this to work and lost a nights sleep after thinking I bricked my old motherboard. There are so many particulars and settings that can cause errors. The Creality (Melzi) V1.1.4 board must be pretty bullet proof, because if there was a way to actually brick it, my countless attempts at getting this to work first with Arduino and then VSCode would have most assuredly have had me ordering a new motherboard on Amazon. One more piece of advice: Put a new motherboard in your shopping cart on Amazon. Doing that made my current motherboard realize it had better get its act together. ;-) Good luck to everyone brave enough to add a bootloader and update their firmware. FYI, used the Elegoo Uno R3 to upload my bootloader using the first half of the video called "Ender 3 Pro Firmware Update - Complete Guide" over on 3D Printscape and then came here to do the build & upload with VScode.

Thanks Michael. As always, this one is a great video. Very easy to follow.

Very thorough & easy to follow! Excellent quality.

This video (as all of your videos are) is amazing and incredibly helpful! I did run into a problem at 14:54 and my build failed. The build would fail almost instantly and it was a problem with platformio. Turns out the fix was super simple and worked for my situation and may for anyone else having a similar problem. Just go the platformio file and delete it, C:\Users\You\.platformio. When you reload Visual Studio it will re-install the .platformio file and should hopefully fix the fail. Hope this helps someone!

I love your videos, they are always very informative and very well structured with a few good jokes thrown in

This was great help for me to solve a problem I was having which need me to learn how to edited marlin.

Wow OK, a 2yr old video solves my problem. Been butting my head against the wall trying to compile with Arduino. 🤦‍♂ VCode - worked perfect. TY Sir! 👏

Damn.. Took me 6 hours of forum search and another 3 hours of KZfaq videos to be told just to use an SD card for uploading the firmware.. The internet told me to connect the printer and send it over and it didn't work and I thought I did something wrong.. Damnit.. Thanks dude, have my like and my sub!

I needed this video about two weeks ago. Still useful to have all this info in a easily accessible place. Thanks very much for putting this together!

Thanks Michael, now I know what to do when my Bigtree skr arrives later this week.

I struggled through this 2 months ago...I feel kinda smart now thank you! Ender 3 Pro, BTT Skr Mini e3 v1.2, BL-Touch

For those using the SKR mini E3 V2.0 you need to build it in STM32F103RC_BTT_512K

Thank you so much for this video. Incredibly helpful and easy to follow!

Thanks Michael, as a newbie to VS Code it was really helpful. 👍

Great Video Michael,I shared to my group and saved to my KZfaq Page..Keep Up the Great work my friend.

Awesome! My skr mini e3 v2 came today and last time I had a hell of a time

Thank you so much! You were the only person that made a tutorial that worked!

Bardzo dobry film. Robiłem to 2 miesiące temu i nie udało się. Teraz dzięki Tobie wiem dla czego. Nie wiedziałem że potrzebny jest drugi plik. Bardzo mi pomogłeś tym filmem. Pozdrowienia z Polski

This has been such a great help, thank you.

Well that took a minute, but i have never used most this software only programmed a lil board using Arduino IDE once for my brother (torch height controller for a plasma cutting table) but i managed to get my Sovol SV01 up and running with my own firmware. Hard to replace the board so i installed a skr mini e3 v2 (and tft35 e3 v3) and could easily find firmware pre-compiled for it IF i had a bltouch installed. Figured if i had to modify a firmware to remove bltouch then i might as well learn to just compile my own. Ordered a bltouch for it but wanted to use it until i got it and my 1st printer was a cr6se so i needed to learn manual bed leveling anyway Love the channel keep it up.

Potato gag. Loved it, laughed out load. Bet you pupils miss you A LOT. Keep up the good work- gives me a reason to break a perfectly set-up Ender-5. Again. (but Tinkering is a Class-A addiction). Cheers.

Thanks for putting this together. It worked out great for me.

Thanks! I used your last guide successfully with Atom, but after a couple failed prints, I realized I needed to actually configure the dang thing (I have since found the recommended settings on github). I got that printermods direct drive coming very soon and will recompile with this guide. Printing on hold til then. Hopefully, I can figure out the correct settings on the first go with your other guide I have bookmarked. :D

Enjoying your content mate!!!

You can use the upload function of Marlin AutoBuild on SKR 1.4 board if you are using the SD port on the LCD. In that scenario PlatformIO or MarlinAutoBuild mounts the SD card in the mainboard as a drive and upload just copies the firmware to the mounted drive; you still have to power cycle the printer but you don't have to jockey the SD card to/from the printer.

Thanks for making this video. Your laptop is faster than mine because I don't have one. So here I sit, sad and lonely. The printer(s) are out in the garage and my one and only desktop PC is in my office. :( Hopefully someday I will find a laptop I can borrow.

thanks as always bro! easy peasy lemon squeezy ! up and running and ready for my bl touch upgrade ! well as soon as amazon delivers it haha

Dude i needed this video 2 days ago

Thank you for this excellent and extremely helpful tutorial video!

My mks gen l just arrived and I had problems in Arduino IDE. Perfect!

Great tutorial, worked for me and my Ender 3 and with BigTreeTech SKR Mini E3 1.2 board.

Thank you for the video. Been struggling for a few days and it was just the simple act of installing a driver to properly recognize the 3D printer. Obvious now but not in the moment as I was getting other errors (file path length in the Arduino IDE).

I am so grateful you do all these guides. Every upgrade I make, you have a clear, excellent video about! Thanks!

Great video with step by step process... unfortunately it didn't work for me and my Ender 5 Pro machine. In the last process I had 5 'Environments' to choose from all of them failed. 😞 I'll have to stick with the factory shipped option for now.

Nice video like all videos. Suggestion for a video would be a motherboard comparison/buy guide for diy builders or people who want to tweak there printer..

Following your steps, using a 4.2.2 MB, but getting erros in Visual Studio when Auto Building merlin... I'd still say that you have a awsome guid. Probably some changes in software since you uploaded this 2years ago :)

Gosh, though this is all new to me, you give me hope.

this video got you my subscription. well done, thanks for the great work!

Worth noting that now you need to trust platform IO or neither it or the marlin extension will be enabled. (at least in my setup) You download platform IO from Microsoft, you can't get it in the privacy version of VS code (vscodium & others). Downloading it from Microsoft does not (for some reason) trust it. This is done through the extensions or CTR+SHIFT+X screen and clicking on the PlatformIO IDE and clicking the trust button. This will show both the platformIO & marlin buttons listed at 4:35. I had my UI scaled down and didn't see the buttons till re-watching this to go through everything step by step to validate everything. I set this up a while ago but haven't didn't really use it and was confused why it wasn't there. I really liked atom, and could find answers to why things weren't working much easier. Spent more time than I'd like to admit trying to figure it out.

Thanks Michael! This worked great. Some are having issues with file size for windows but The melzi_optiboot_optimized compiled just fine on windows for me.

Teaching Tech... best 3d printer guides period

Great video! I learned a lot and this got me to try Visual Studio. Much better than Arduino IDE method! Thanks Michael!

Thanks! Also enabled manual tramming using the same firmware.

Michael, you're a life saver man. Thanks a lot.

I actually started laughing out loud when you tried to turn on the potato. My wife thinks I've lost it since I'm laughing at 3d printing videos

This is a fantastic and simple guide.

Fantastic explanation as always! Thanks :)