Buck 110 Sheath Redesign and Giveaway Winners!

Рет қаралды 7,264

Wyoming Wright

Жыл бұрын

Another look at the Buck 110 side carry sheath and we announce the winners of last month's giveaway.

Пікірлер: 64

@brittlanders351 Ай бұрын

Watched all 3 videos…excellent design and work!

@chmuen4832 6 ай бұрын

What a beautyfull county! Greetings from germany. I get my buck 110 for christmas this year

@stevengrimes4473 Жыл бұрын

Going crazy over these videos! Extremely good and enjoyable to watch!

@Goiks Жыл бұрын

Very nice. The slimmer design is great. I like my knife to almost disappear on my belt until I need it. Slim sheaths with a horizonal draw go a long way to this effect.

@MagiCaEagleCastillo606 Жыл бұрын

Congratulations to the winners 😎🤙

@michaelsteele2510 Жыл бұрын

I like the design update.

@xxfaction6xx Жыл бұрын

another great video. Thanks

@HickSquatch Жыл бұрын

I love the loop sheath!! Beautiful work!!

@wyomingwright Жыл бұрын

Rob, you were one of the giveaway winners! I need to ship a sheath to you. Can you email me your address wyomingwright@gmail.com

@HickSquatch Жыл бұрын

Yessir!! Email sent! Thank you, I am STOKED!!

@rifleman1873 10 ай бұрын

I really like that design.

@josephclarke6223 2 ай бұрын

good job well done.

@stevedavid2315 Жыл бұрын

Exceptional work. You should make a sheath for a K-Bar with a holder for a sharpening stone and ferro rod.

@ROE1300 Жыл бұрын

👍 Nice sheath. Good video.

@Buechse._Pusteblume.. Жыл бұрын

Moin aus Hamburg/Germany, Thank you! So i can build Sheath by myself..., vielen Dank und liebe Grüße!😁

@dontroock1843 7 ай бұрын

Great video!!

@454FatJack 2 ай бұрын

Export to Europe? 1 get that knive, 2 that scabbard is awvesome❤

@colinw7496 10 ай бұрын

Just started watching your videos. Love the sheath. What do you use in the wax pot? I've used neatsfoot oil and paraffin with good results. Do you have something else in it?

@wyomingwright 10 ай бұрын

Thanks for the comment! In that pot I had beeswax and rendered filtered beef tallow (which is similar to neetsfoot oil). I have also used lanolin.

@chadwilson1707 Жыл бұрын

I'd sure like to buy one of these from u . Do u have an etsy or something

@marktwain5722 Жыл бұрын

A little tip. When I use edge Kote or any other edge paint, I apply it with a #2 pencil. I also have the professional roll on tool but honestly, the pencil works fast and smooth.

@wyomingwright Жыл бұрын

Thank you!

@RafaelGarcia-yt9zc Жыл бұрын

awesome builds let me know if you ever decide to sell them

@HughG.Rection101 10 ай бұрын

Hi, I am wondering if you offer these for sale anywhere? Thoroughly enjoy your content

@wyomingwright 10 ай бұрын

You can email me at wyomingwright@gmail.com

@IAteYourSandwich Жыл бұрын

I wish I had the skills to make something like this. With practice and following along I could probably get something decent after a couple tries. But good leather ain’t cheap. 😅 For now I’m fine just watching haha. Also, do you have a video where you explain why you do things along the way ? Like why the sanding on the edges, the paint? On those same edges. Why you glue as well as stitch, the dip in wax. Etc. Would be interesting for people like me whom are completely new to leather.

@wyomingwright 11 ай бұрын

I need to do that. It would be a long video and I typically dislike hearing my own voice, but I should definitely do that at some point.

@domenicobeltramo4610 5 ай бұрын

Di quale spessore è il cuoio che utilizzi? 2 or 3 mm.?

@flathusen5215 Жыл бұрын

Hello, i love the sheath! Are you taking orders?

@wyomingwright Жыл бұрын

Thank you! Not at this time

@victorinoxlove Жыл бұрын

Nice pouch! I try but with no succes. Great skills. I hope to see more video from You!

@wyomingwright Жыл бұрын

Thank you! I appreciate the compliment. I bet you’re not giving yourself enough credit.

@ROE1300 Жыл бұрын

P.S. I prefer this design to the one last week simply because it is thinner and the loop is part of the back piece.

@user-hc8ui9me6f 11 ай бұрын

Could this be adapted to a 112 automatic with a snap flap? I made something similar, but it doesnt look near that good. Any suggestions? Thanks.

@wyomingwright 11 ай бұрын

Yes, I’ve made several for the 112. I like to do the 112 with bottom end in the sheath rather than the pivot end.

@vendetta8022 10 ай бұрын

I own one sheath which is very similar, costs me 20 bucks but im gonna say its the best 20 bucks ive ever spent.

@escapetherace1943 10 ай бұрын

no way it has a double stitch line and finish like this, not for 20 bucks... 😭

@wingednomad8423 10 ай бұрын

What is the leather thickness you used for this sheath? Also, what thickness do you like for a knife like say the buck 119?

@wyomingwright 10 ай бұрын

I used about 5 oz on the front piece that is wet formed and about 8 oz on the back piece that also forms the loop. For the buck 119 it depends on the style of sheath but I’d say about 6 oz would be good off hand

@stevengrimes4473 Жыл бұрын

What is a good leather weight that you would recommend for this style of sheath??

@wyomingwright Жыл бұрын

4-5 oz. You can use heavier leather on the back. But it gets hard to form details around the knife when you get up to 6 oz and higher.

@klatonpowell Жыл бұрын

Incredible, where can I buy one of these sheaths?!

@wyomingwright Жыл бұрын

Thank you. I’m not currently producing any for sale, but I hope to get something going by summer

@klatonpowell Жыл бұрын

@@wyomingwright awesome!! I will check in again. I have a similar one that I carry appendix style and my knife just fell out of my sheath while I was lopping up a tree with a chainsaw. It fell out mid stride and I kicked my poor 110 a good 6 feet in front of me. Your design looks much more sturdy, I like the click of it locking in place!

@Aracnoth72 4 ай бұрын

How would you make this to go on your left side for right hand draw

@wyomingwright 4 ай бұрын

You could just put it on upside down on your left side. It would work just fine that way. It will ride slightly higher that way but only cm. If I knew I wanted to carry on the left side all the time, I would build the sheath with the blade on top in that orientation, but that’s a personal preference thing

@wilfredprins9718 Жыл бұрын

what liquid you put the leather in? water or something else

@wyomingwright Жыл бұрын

I put it in water to wet form it. Then when it’s finished, I dip it in wax.

@wilfredprins9718 Жыл бұрын

@@wyomingwright I had the idea it was wax but I wasn't sure. how to get the excess of? it won't form a "candle" layer on the outside?

@toddstricker4575 5 ай бұрын

What glue do you use?

@wyomingwright 5 ай бұрын

I use Barge cement now but I have used a lot of Weldwood in the past

@MichaelSmith-cq4zk 2 ай бұрын

How much

@65mach Жыл бұрын

I'd buy one for my 112 auto ranger,,,,, taking orders yet?

@wyomingwright Жыл бұрын

Not yet. Soon, I hope. Thanks for your feedback!

@Camilio91 Жыл бұрын

👌… what animal horn is this? (your folder)

@wyomingwright Жыл бұрын

I use a mule deer antler to mold the leather and to burnish the edges.

@Baldmanblades Жыл бұрын

Can I ask what is the leather weight

@wyomingwright Жыл бұрын

About 5 oz

@escapetherace1943 11 ай бұрын

5-8oz is best for knife sheaths. Heavier probably if open blade

@MrCharles960 Жыл бұрын

Add your text to keep explaining stuff.

@mikemike8087 Жыл бұрын

My comment is why didn't you just tell the price

@wyomingwright Жыл бұрын

The price if I sold it? It’s not for sale. Or do you mean how much it cost me to make it?