XSAPI; The US Military's Highest Level Of Personal Body Armor?

No video

XSAPI; The US Military's Highest Level Of Personal Body Armor?

Рет қаралды 22,325

Күн бұрын

💲Links: campsite.bio/b...
‪@Oxide_does_his_best‬
This demonstration pertains only to the samples tested. This demonstration/review
may not be used to claim product certification, approval, or endorsement by NVLAP, NIST, or any federal government agency. Always seek official NIJ accredited labs reports for threat profiles.
* * The information presented in these videos is technical and educational in nature. All safety precautions are followed. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. This video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms.
**This video could contain affiliate links. If you use these links to buy something we may earn a commission. Thanks for the support!
#XSAPI #M993 #M995

Пікірлер: 153

@BuffRANGE Жыл бұрын

Per online documentation, the XSAPI is using SiC for the strike face, not B4C.

@zadamany9255 Жыл бұрын

I know you have talked to Qwe already, but if you do manage to get him some of the pieces of the strike face, we can confirm and tell a lot more about the plate's construction. Excellent video!

@BuffRANGE Жыл бұрын

@@zadamany9255 Samples were inbound :D

@zadamany9255 Жыл бұрын

@@BuffRANGE you are the GOAT! Not sure if Qwe sent the ESapi data but if not, just ask him. Super excited to see what comes next!

@qwe304 Жыл бұрын

@@zadamany9255 I did

@Nuke-China Жыл бұрын

I have an XSAPI that's .8" thick and weighs 5.3 lbs for a size Medium. Believe it's B4C.

@timrobinson6573 Жыл бұрын

I don't know much about armor but back in 2012 or 2013 I was helping a guy from work clean out a property he owned. The tenant had moved out and left some stuff behind. The tenant was a Marines who served in Iraq and he left behind a ceramic armor plate, no carrier or anything. I can't remember the details exactly but it had markings, expiration date. It said it expired in 2010. I didn't know armor expired at the time. Back then I didn't even know body armor could be ceramic. We were tapping on it with our knuckles trying to figure out what it was made of lol

@Motoboo_Marine Жыл бұрын

Body armor doesn't actually expire, at least not in the traditional sense. The reason those expiration dates are there is because micro-fractures can develop over years of constant use. Plate carriers get dropped and bump into stuff quite a bit. There are plenty of videos showing expired plates continuing to stop threats they are rated for well past the expiration date, but the date is put there because the manufacturer can't guarantee it'll uphold it's rating after withstanding abuse for that long. If you keep a plate in controlled, stable conditions it'll be fine.

@privateassman8839 Ай бұрын

@@Motoboo_MarineEhhhhhh unless it's laminate. Epoxy degrades over time. Moisture intrusion can reduce effectiveness, and UV exposure will make certain plastics brittle.

@azeke8 Жыл бұрын

Very impressed by the plates’ performance and by the fact that you were able to obtain them. Overkill level of protection, in the spirit of “overmatch”.

@daholl8942 Жыл бұрын

funny enough they arent actually that rare. the only rarity is finding them at a reasonable price. since they were put in storage by the military all the ones that had been issued had been largely bought up by surplus guys and people looking to resell them. it sucks but it is what life is right now

@Ammosexual Жыл бұрын

man.. actual tungsten core tests on an acutal XSAPI plate.. This channel is the only source in the world where we can watch these stuff fricking love your content dude

@BuffRANGE Жыл бұрын

My pleasure. I come up with questions and feel if I can answer them surely others have the same questions needing answered :D

@PracticalTacticalFedeli Жыл бұрын

Seriously.

@michael9r9r Жыл бұрын

Your channel is criminally underrated. Keep up the good work!

@BuffRANGE Жыл бұрын

Thank You!🎉

@chiefro7 Жыл бұрын

Really, REALLY excited for the Adept colossus video!

@seanmtak7573 Жыл бұрын

You shot that plate like bob ross painting a canvas 😂 great test! I wouldn’t mind seeing a green tip test with ballistic gel behind a plate. Or maybe a chunk of clay lol. People seem to be liking green tip more for its ability to go through plates, despite it having some seriously bad real world results. Maybe it would be more effective with a plate in front of it? 🤷‍♂️

@petrkarv Жыл бұрын

This is the ice cream shop of ammo and armor testing.

@BuffRANGE Жыл бұрын

Thanks!

@mageyeah7763 Жыл бұрын

Any chance we'll see a Buffman test of one of the new "rifle resistant" helmets? Doesn't seem to be any on KZfaq yet.

@BuffRANGE Жыл бұрын

I have a KCI and a HHV helmet to test. If there's good turnout in them, logically the next step is these rifle rated ones.

@allycatnaranjo8960 4 ай бұрын

@@BuffRANGEHave you heard of ULBRICHTS?

@matth7551 4 ай бұрын

@@allycatnaranjo8960they advert some high end helmets. Well outside my Reach. But perhaps they may see the benefits of demos and want to help.

@450ktm520 Жыл бұрын

Nice work man They should hire you for field testing prototypes

@BuffRANGE Жыл бұрын

Thank You! That would be awesome. !

@ivancorey7389 Жыл бұрын

Feed the algorithm for the King of Armor Destruction.

@BuffRANGE Жыл бұрын

It was mighty hungry today!

@LSD25 Жыл бұрын

Very cool test, excited to see the modern commercially available (claimed) equivalents to the XSAPI tested in the future. Any update on when you plan to test the plates you left outdoors and submerged in water? Very interested to see the results of those being tested.

@BuffRANGE Жыл бұрын

They'll be at 2 yrs here next month. I really want to hold them until at least 3. Or I imagine someone would find a way to bitch we didn't wait long enough?

@echo4533 Жыл бұрын

I love your stuff man, these videos are extremely educational and probably there are no other channels on KZfaq who test ammo and armor as elaborate as you do. However I have a question. Did you shoot both the 7.62 SWISS P AP and .300WM M2APs from the same gun? Did I miss something?

@BuffRANGE Жыл бұрын

Yes. I typically shoot most .30 caliber rounds from the 300 WM, and I just download/upcharge the bullet depending on what I'm going for. :D

@echo4533 Жыл бұрын

@@BuffRANGE Oooh. So if I understand this correctly, .308, .30-06, and .300WM cartridges have the same bullet and it's just the case that's differently sized? And when you reload a .308 bullet into a .300WM case you load as much powder in it as a normal .308 cartridge would have in it? Also thanks for the quick response!

@BuffRANGE Жыл бұрын

@@echo4533 Yes many of the 308, 30-06, 300WM 30-378 Weatherby, and even 300 BLK use .308 caliber bullets. The NIJ spec for M2AP calls for 2880 fps and for the most part that's unobtainable from 30-06 or even .308 without going to 26"+ barrels, and then may still be close to max pressure. So with 300 WM, I can download the same bullet to get 2,880 fps, or I can up it's charge and get up to 3,250 fps. With the 196gr Swiss P AP, I could probably get it going 3100 fps, but was downloaded to get to the VPAM 12 spec

@Swishersweetcigarilo Жыл бұрын

Providing great information as usual.

@BuffRANGE Жыл бұрын

My pleasure!

@connorgannon1153 Жыл бұрын

I'd love to see what kind of penetration you could get with a 993 projectile in 300 Win loaded to max pressure.

@rodvarg7820 Жыл бұрын

It would be interesting to shoot 5.45x39 7N39 cartridges with tungsten core. I tested them on Granite 5A plates and they penetrate through the plate from 15 meters

@BuffRANGE Жыл бұрын

My issue is obtaining the 5.45 here in the states :(

@rodvarg7820 Жыл бұрын

@@BuffRANGE I've already written to you about them. I can send( from Ukraine) bullets for reloading with all the data about gunpowder and its weight.

@BuffRANGE Жыл бұрын

Have you? I don't honestly recall. I'm not aware of legally being able to have these sent to me.

@qwe304 Жыл бұрын

@@BuffRANGE you just need someone across the pond to ship you some fishing weights 😉

@rodvarg7820 Жыл бұрын

@@sasquatch440 You have old information. I can't post photos of packs and cartridges 5.45ППБС here 🙁

@spearthumb68 Жыл бұрын

Freedom by me sent me! Subscribed.

@BuffRANGE Жыл бұрын

I’m not sure who that is! Can you link me so I can thank them!

@spearthumb68 Жыл бұрын

@@BuffRANGE Freedom by me homesteading , he is one of your subscribers.

@BuffRANGE Жыл бұрын

@@spearthumb68 I'll be sure to thank him!

@Tree457 Жыл бұрын

I mean 2/3 m993 stops is some great performance when nothing else on the market can stop the round, so hey great tests.

@seven1six Жыл бұрын

FINALLY!!!!!!!!!!!!! Edit: is it wrong that I skipped to teardown before watching anything else 👀 😀

@tylergarrett4498 Жыл бұрын

It seems like I remember the socom plates having issues with cracking due to manufacturing errors from the ~2012 frame

@BuffRANGE Жыл бұрын

These both had passed inspection stickers on them from recent years.

@Minuteman4Jesus Жыл бұрын

I've seen armor that withstands .50BMG, seriously. The energy transfer would still kill you, but at least you wouldn't be transformed into pink mist, whatever that's worth.

@nolancurtis8826 Жыл бұрын

Energy transfer is somewhat of a myth. Taking a hit would only result in damage based on penetration, or deformation. Any plate that stops a bullet without penetrating, deformation, or spalling into your neck, will only give you the equal and opposite reaction, energy wise. (The recoil of the gun it was fired from)

@mekingtiger9095 Жыл бұрын

@@nolancurtis8826 The problem is that all that energy will be concentrated into *one.single.point* of the bullet which will give off far more pressure to the point hit than the stock of the gun gives to the shoulder of the gunner. Though it's still physically possible to disperse the the energy received through proper trauma plate inserts. It's just that stacking enough of them to disperse the energy of the round would make the armor so heavy and cumbersome it would be impractical to wear as of now.

@nolancurtis8826 Жыл бұрын

@@mekingtiger9095 have you ever seen a plate get hit?

@mekingtiger9095 Жыл бұрын

@@nolancurtis8826 Unfortunately, I don't live in the US of A with its gun freedom in order to test it for myself, as much as I would love to make ballistic tests. But considering there has multiple cases of people getting shot at with body armor and feeling like a sledgehammer just punched them full force and even some cases of broken ribs, I can't imagine .50 Cal being any easier to endure. It's kinda the same principle of warhammers and blunt weapons bashing against a full plate armored knight on, say, the helmet. Sure, you didn't penetrate, but you didn't have to in order to damage the thing inside... I may be wrong, so correct me in case I messed up.

@nolancurtis8826 Жыл бұрын

@@mekingtiger9095 bruises at worst

@caseybrown5183 Жыл бұрын

Great work.

@BuffRANGE Жыл бұрын

Thank you! Cheers!

@landmine940 3 ай бұрын

Whooo 🔥

@cascadianrangers728 9 ай бұрын

Holy crap those are like half the thickness of the ESAPI plates I was issued in the USMC

@qwe304 Жыл бұрын

3300 fps m2ap is a doozy, I wonder if you'll have to load the P AP hot to get through the adept and SAS plates.

@ghostwriter1415 Жыл бұрын

How did you comment 4 day's ago when this video just came out within the last hour?

@qwe304 Жыл бұрын

@@ghostwriter1415 early release for patrons

@brudamiranda3314 Жыл бұрын

Good 1 budsz

@brudamiranda3314 Жыл бұрын

Thanks!

@BuffRANGE Жыл бұрын

Thanks !!

@robbabcock_ Жыл бұрын

Great stuff!

@coonsby Жыл бұрын

I've always wondered how modern ap ammo projectiles would work in the wssm and wsm cartridges loaded hot would do against body armor but nobody has tried yet. Most interested in the 223 wssm

@BuffRANGE Жыл бұрын

You could do some cool things running 224 bullets that fast!

@TacticalandThings Жыл бұрын

Awesome as always!! Total destruction!

@ahole5407 10 ай бұрын

Need to do an updated video with Rev G ESAPI.

@mekingtiger9095 10 ай бұрын

There's a new revision for ESAPIs already?

@fraleo2192 7 ай бұрын

@@mekingtiger9095 goes up to Rev J currently, and newer GEN III Esapi plates with a more defined shooter's cut being issued

@ct2368 Жыл бұрын

I'm curious if you would test the speed of rounds after passing through metal body armor?

@myanaloglife9450 Жыл бұрын

Is that even possible I would be surprised unless you had specific systems for that normal system works off shadow and light or a type of radar

@tacticalpickle7 7 ай бұрын

It's funny how such a common round like XM193 just punches right through any armor.. the speed is scary.. you don't need to have specialty ammo.

@BuffRANGE 7 ай бұрын

And yet M193 here did not penetrate. It's ability is dependent on that armor being made out of steel :)

@jammbbs1688 Жыл бұрын

God I wanna se guard dog body armor m4 Ridgeback done by you everyone else does like loose dirt box as a backer

@BuffRANGE Жыл бұрын

Maybe someday they'll let me test one. My funds for armor procurement are negative right now.

@user-oy9zy4ds9m Жыл бұрын

M993 in 300 win mag would go through almost certainly. Swiss p ap is way too slow

@ghostwriter1415 Жыл бұрын

Did you see the video that he did with the Mauser, and the old WW2, W reinforced Pb bullets? The 7.92's were over 190 grains, and still getting close to 3000 FPS! Not only did it completely perforate a level 4 LAPD plate, it went through the steel target behind it as well, and it did so at 100 yards! You better believe the Rush-ins have an assortment of MG 42's with millions of 7.92 x 57 AP rounds at their disposal.

@BuffRANGE Жыл бұрын

Do you mean slow per spec, or just slow in general? At 196gr I couldn't find any load data to support getting 2,650 fps in .308, and that's why I downloaded it in 300 WM. I have some going 2800 :D

@user-oy9zy4ds9m Жыл бұрын

Slow in general

@Frens03 Жыл бұрын

Got any old gen black SAPI to test? Those are all expired now and would be interesting how the hold up..

@BuffRANGE Жыл бұрын

I don’t. I’m sure someone has some somewhere.

@user-oy9zy4ds9m Жыл бұрын

Fron what I’m seeing my guess is that SMKH 8mm would go through??

@BuffRANGE Жыл бұрын

I would say a high probability of SMKH smoking this

@timewave02012 Жыл бұрын

Seems likely. I sent him some in January, so I know he has it.

@BuffRANGE Жыл бұрын

@@timewave02012 It's still in his box :D After the performance we saw even at 100, I have a hard time just blasting it against threats. Maybe we can use it on the Adept?

@user-oy9zy4ds9m Жыл бұрын

I couldnt believe the power of the smkh that u tested buff, 194 grains at 2947 fps especially for an 80 year old bullet….. insane

@BuffRANGE Жыл бұрын

@@user-oy9zy4ds9m Has anyone else documented the velocity of SMKH? When I chrono'd SMK I was only getting 2,600~

@aaronperkins7152 Жыл бұрын

Where were you able to source these plates? And are there still some available for purchase?

@BuffRANGE Жыл бұрын

I believe these were from a Reddit sales post. The rest are long gone.

@aaronperkins7152 Жыл бұрын

@@BuffRANGE ah dang, any other sources you know of?

@BuffRANGE Жыл бұрын

@@aaronperkins7152 They show up on GunBroker, or Ebay, or AR15.com EE from time to time.

@qwe304 Жыл бұрын

You can find them, just most people aren't posting publicly about them. Don't pay more than a grand for a set

@Nathan-jh1ho 3 ай бұрын

Wonder if this can stop the new 6.8x51 AP round, which is also some 120-130 gr tungsten round at 3000 FPS.

@BuffRANGE 3 ай бұрын

That's a very good question that I would love to test some day!

@user-oy9zy4ds9m 21 күн бұрын

This plate has zero chance of stopping m1158.

@user-oy9zy4ds9m 21 күн бұрын

Enriched tungsten at 3300 fps

@BuffRANGE 21 күн бұрын

@@user-oy9zy4ds9mhow is it going 3,300 fps if it’s 150gr? Or so the specs claim.😊

@user-oy9zy4ds9m 21 күн бұрын

@@BuffRANGEthe hybrid cased version supposedly is loaded to 100k PSI, and is 130 grains, from a 16” barrel that will be about 3400 fps, the 13.5” around 3200

@380master9 Жыл бұрын

Why are these so impossible to acquire?

@BuffRANGE Жыл бұрын

Because all of them that were issued were reclaimed and stored in a warehouse. Allegedly anyways because a few sets pop up for sale every now and then.

@380master9 Жыл бұрын

@@BuffRANGE oh these are duty issued? As per military or police?

@BuffRANGE Жыл бұрын

@@380master9 These were only issued to US Military troops from my understanding. Then were recalled and stored in warehouse..

@mekingtiger9095 Жыл бұрын

@@BuffRANGE Yeah, they were made to stop AP threats that never actually were encountered in the field. So they were called back.

@user-yb5sn6pw4l Жыл бұрын

where did you buy this how much did it cost

@BuffRANGE Жыл бұрын

I believe I paid $400 for it, off a Reddit for sale post awhile back, and bought one from an FFL in Florida who had one.

@spartanmikek028 Жыл бұрын

Where the hell do you get the m995!?!?

@BuffRANGE Жыл бұрын

Collectors have it from time to time..

@cascadianrangers728 9 ай бұрын

Is it still a lot easier to find just the pulled bullet v.s loaded rounds?

@poisonarc Жыл бұрын

It's B4C fam.

@BuffRANGE Жыл бұрын

According to the contracts, they are SiC

@evanhutfles4239 Жыл бұрын

It can't be 100% B4C. 100% impossible.

@BuffRANGE Жыл бұрын

@@evanhutfles4239 Per contract stuff I read it indeed is Sic

@evanhutfles4239 Жыл бұрын

@@BuffRANGE You’re right, it has to be. Or atleast a blend with >80% SiC content. Tungsten rounds melt through B4C.

@PracticalTacticalFedeli Жыл бұрын

I have me a set of this and I love it

@BuffRANGE Жыл бұрын

Hard to go wrong with the XSAPI :D

@PracticalTacticalFedeli Жыл бұрын

@@BuffRANGE exactly my thoughts man! Thanks for this test and review. Seriously you’re the only person anywhere doing it