I checked, MAF, MAP, O2, FUEL REGULATOR, EVAP, SMOKE THE INTAKE. NONE. IT WAS THE PCV VALVE MISSING OR BAD and or Too much fuel vapor
Пікірлер: 50
@jerrypeal653 Жыл бұрын
You got your point across so I don’t know what these criticisms are about. Grow up people !
@jrfmechanical30585 жыл бұрын
Thank. Positive crankcase ventilation (autospell) Yep. Somehow it was missing, and that what made it act weird. Getting rich fuel from somewhere which was the pcv.
@ItsaRomethingeveryday3 жыл бұрын
This same thing caused out car to stall and not restart, got one from pick a part for ten dollars and now car is happy, Liked your vid Btw, it's a Pcv valve, not pvc
@jeffreyhoffmann2176 Жыл бұрын
4yr old video helped me out. Thanks
@jrfmechanical3058 Жыл бұрын
Lol
@robertsmith29562 ай бұрын
I was wondering where that bugger was hiding. Under the MAP sensor, how could I be so stupid. LOL
@mr.fredricklawngtawnghedav50942 жыл бұрын
Try cleaning the throttle plate and throat. A little grime around the throat can restrict enough air to give inacurate readings to the computer.
@daddynowski2 жыл бұрын
Jesus some of yall has brutal comments get a grip!
@timayscott845015 күн бұрын
Oh i feel sick
@ancient_shadow7157 Жыл бұрын
That wiggle test you showed. I did that on mine and some liquid came out but my car is running a lean code. Either way, what do I replace or do to stop that piece from having to much
were you surging idle? mine is surging in park but doesnt go to high maybe 1400 but then goes down like it wants to die. drops to 3-5 rpm for a bit then jumps to bout 8 to settle
@jrfmechanical30582 жыл бұрын
No. Just reving it, then it got that extra fuel fumes into the intake. So that was the cause of it. Just getting more rich and couldn't idle.
@bigspeaker781 Жыл бұрын
I think this is my problem I’ve been replacing everything and it still does both.
@bigspeaker781 Жыл бұрын
@@jrfmechanical3058 you deleted your comments
@practicalapplications8899 Жыл бұрын
Why would u take it back out? If you install a part it stays.
@jrfmechanical3058 Жыл бұрын
To show what happens when it doesn't work, like stuck open or missing.
@bruceroozdar91563 жыл бұрын
Hey, did changing the PCV valve work for you? Wasn’t able to find the part 3 video. I’m having the same sort of issue on my 2002 Lesabre. Getting hesitations around 2500 RPM. Check engine light went on for the O2 sensor bank 1 sensor 1. Had my fuel pump, fuel filter, air filters, catalytic converter all replaced because the car has been sitting for 2 years
@jrfmechanical30583 жыл бұрын
Yeah. Mine was stuck wide open. So it was running too rich from the blow by. Replaced it and it's better now.
@bruceroozdar91563 жыл бұрын
@@jrfmechanical3058 Gotcha. Did you get a check engine light on yours? Mines giving me the PO131 code. Thanks for video, this has been super helpful!
@jrfmechanical30583 жыл бұрын
@@bruceroozdar9156 no check engine light. I was replacing ther intake gasket. But running rich.
@adventureoflinkmk2 Жыл бұрын
@@jrfmechanical3058hey does lack of o ring also cause the surging
@wadedavis2334 Жыл бұрын
I am currently seeing all the same things with my lesabre and it almost dies after I start it any tips??
@wadedavis2334 Жыл бұрын
It also surges after I’ve been driving it down the road when im waiting at stop lights
@jrfmechanical3058 Жыл бұрын
Replace the pcv valve
@jeremyderr331011 ай бұрын
Mine is running uo to 60 and bogging down. Dies when going 30 or lower.
@jrfmechanical305811 ай бұрын
Might be the same ]problem
@delcorick99674 ай бұрын
I don't think you had pcv valve in their to begin with, it didn't come out with the map sensor holder nor was it in the plenum from what I saw, regardless I hope u figure it out
@jrfmechanical30584 ай бұрын
I did.
@JalopyTechnology7 ай бұрын
PCV.....
@jrfmechanical30587 ай бұрын
Yep. PCV
@reggiehowze1891 Жыл бұрын
You forgot to put the o-ring back on new part
@jrfmechanical3058 Жыл бұрын
Opps
@reggiehowze1891 Жыл бұрын
Lol. I learned from experience. Thanks
@adventureoflinkmk2 Жыл бұрын
@reggiehowze1891 yeah was gonna say I just redid my intake manifold and both times I changed it I forgot the o ring for the pcv.. ope
@jrfmechanical3058 Жыл бұрын
@@adventureoflinkmk2 dang. Alright, get that on there.
@adventureoflinkmk2 Жыл бұрын
@@jrfmechanical3058 would if I could but JUST when I got everything buttoned together and for the first fire (which surged idle.. again.. and somehow the MAP sensor mounting came back loose?) I had to take my fiancee to the hospital.. her arm and shoulder were bothering her all weekend
@garyhall83089 ай бұрын
Watch someone that knows what they are doing because there is a o rig that goes around the PCV valve it doesn't just drop in.
@jrfmechanical30589 ай бұрын
I believe it was already on there
@garyhall83089 ай бұрын
I'll drop the replay flag on that one.@@jrfmechanical3058
@7denots10Ай бұрын
Jesus Christ if you shook the camera around a little more I might be able to see 🤦♂️
@jimellerman56868 ай бұрын
pCv valve NOT pVc!!
@jrfmechanical30588 ай бұрын
I know, i mis said it. Postive crankcase ventilation.
@johnwagner45593 жыл бұрын
Looks like u forgot the oring on the pcv valve. Need better camera work, genius.
@jrfmechanical30583 жыл бұрын
Yes
@BridgeToGantry2 жыл бұрын
Buick LeSabre filmed in vertical moron vision.
@harryray41232 жыл бұрын
Comment made by world renowned couch potatoe. Get a life