BUILD AN AMAZING DJ FACADE - low cost

BUILD AN AMAZING DJ FACADE - low cost - 1^ p.

Рет қаралды 16,318

Күн бұрын

build a cheap facade for DJs with a few elements and a little bit of manual work. Make pro adding visual effects and amaze your audience at the next party.
Music : Roland Gi Gustinetti
(#enonciscassatelaminkiaconlascuolacopyr.)
Projector usb
Videomapping software.
MadMapper project file :
niceonerecords.altervista.org/...

Пікірлер: 50

@markkelvisar9544 4 жыл бұрын

Please show us how you made that visuals on facade I don't have a clue

@djteebabz4053 4 жыл бұрын

This is awesome I started building mine some days back . I am glad I saw this video now it has give me some ideas. I have my frames al white. I am not sure how it will look like with the sheets. I saw some similar at Home Depot they call theirs twinwall plastic. I currently have plans to use LED strips but after seeing your visual effects I will into those apps you mentioned. You have done an amazing job

@dj_bsims 3 жыл бұрын

🤩🤩💯💯🤩🤩 This is incredible!!! Is this all with one projector?

@Ajmontalbo 4 жыл бұрын

This is amazing

@DjEltonOkeyOficial 4 жыл бұрын

Could you tell me how the connection was made without effects on the facade?

@kellysteadman2413 4 жыл бұрын

Is the video software east to use or do you have to be a pro to use it ? Love what you've built I'm going to give it a go

@fdudha 2 ай бұрын

What type of do projector did you use for the mapping, are located in front or rear of facade?

@qevlar 2 жыл бұрын

Ok but how did you project the fx on the facade?

@johnrivera6085 2 жыл бұрын

This is awesome! One quick question... how far did you place the projector for the visual effects? Is it right at the bottom of the screen or high up pointing down?

@RolandGi1 2 жыл бұрын

hi it depends on the spaces of the location. usually I place it in front of me at a height of 3 meters because I have another screen behind my shoulders. But I also tried behind my legs and the result is fun ... the shadow of my dancing legs that I lift by leaning on the table with my arms, it seems that I am flying😂. If you have a suitable projector you can place it on the ground near the facade

@lollol-hk6fv 3 жыл бұрын

What projector are you using?

@djsMek_ Жыл бұрын

I Pannelli che coprono la console sono in plastica, come hai fatto a proiettare i visual fx ? hai montato degli schermi?

@djtrinstar2k9 Жыл бұрын

how did you add efx to it?

@DJTEST100 2 жыл бұрын

How did you do visual fx??????

@DjPositiveP Жыл бұрын

How did you add the video& visuals?

@justabout6144 Жыл бұрын

Like it 👍. Do you know what the weight is? Thanks

@automix1728 4 жыл бұрын

The projector is behind or in front?

@RolandGi1 4 жыл бұрын

Hi. I use it in front because I have other visual effects above and behind me. but if you have a suitable projector you can use rear projection.

@CapnClutch08 4 жыл бұрын

@@RolandGi1 I was about to ask the exact same thing. Do you have any recommendations on a projector to use? i'm seriously debating on doing this exact project and just wanted to get some tips on a decent projector.

@MyJedi007 2 жыл бұрын

Great video, what is the lighting system you are using at the beginning of the video and from around 5 minutes 50 sec's? Where do you find this equipment and how much would I expect to pay for something similar? Thanks in advance!!

@RolandGi1 2 жыл бұрын

Hi. Thank you. No lights needed. i used only one projector and video mapping program (like madmapper or Arkaos gvj) (i also posted link of my project file because users wanted it)

@MyJedi007 2 жыл бұрын

@@RolandGi1 thank you for the reply. What sort of projector is used and how much would I pay to achieve similar results? Mapping and projector costs etc? Thanks again!

@pushpindersinghjuttle8934 Жыл бұрын

can u show full video tutorial to add effects on facade

@welchsoy7780 3 жыл бұрын

What projector do you use? Need some recommendations for one

@welchsoy7780 3 жыл бұрын

And where can I find those exact visual effects at the end of the video?

@RolandGi1 3 жыл бұрын

@@welchsoy7780 Hi , I have three projectors because I also use them in large rooms .m.facebook.com/story.php?story_fbid=2476761919106609&id=100003184768275&extid=dbvBkGEg5p6vrdNN I use all Acer cheap brands. Must have high brightness 3000 ansi lumens at least and resolution 1080 (xga) ... In thIs video I used an old Acer P 1283 which has the zoom. I also have a P 1186 and an Epson 5000 ansi lumen

@RolandGi1 3 жыл бұрын

@@welchsoy7780 the video background seems to me to have found it on youtube or shutterstock , but there are many free sites

@lollol-hk6fv 3 жыл бұрын

Hi , where did you place your projector?

@RolandGi1 3 жыл бұрын

hi, I use an Acer projector (I have two) with 3000 ansi lumen xwga placed in front of me (usually I also have a screen behind my head and I manage everything with a single projector and GrandVj xt or Madmapper software)

@lollol-hk6fv 3 жыл бұрын

@@RolandGi1 thank you very much

@kaliobabyboss9530 4 жыл бұрын

Can’t find those sheets you used anywhere?

@megemonsterenergy 3 жыл бұрын

Or go to a builders merchant like Travis Perkins and ask for proplex sheets

@kristenlehmann 4 жыл бұрын

But how did you add the visual effects? LED panels?

@RolandGi1 4 жыл бұрын

hi. i use a videomapping program and a projector. Since I usually also have a screen behind me I project frontally. but you can also use rear projection. I use madmapper or grandvj

@DJAlphaMusic 4 жыл бұрын

Roland Gi Gustinetti do you run madmapper with your Serato or traktor? On the same computer?

@RolandGi1 4 жыл бұрын

@@DJAlphaMusic yes it would be possible but i prefer to use an old hercules controller mapped for madmapper on another computer

@EricArbour- 2 жыл бұрын

The most important thing is not show !! ??? the light lol

@MiguelRodriguezrodrig7521 Жыл бұрын

can you send me the file for the visual fx

@RolandGi1 Жыл бұрын

niceonerecords.altervista.org/roland%20gi%20dj%20rollover.html

@marcusmiles568 4 жыл бұрын

Man I love this mapped creation, is there a way I can get a dub of your file? I just ordered a projector just because of this video...

@RolandGi1 4 жыл бұрын

Hi . Usually the file is created for the object to be mapped. But if you believe it can be useful, I will upload my madmapper project. Subscribe to know when the link will be available. Hi

@marcusmiles568 4 жыл бұрын

@@RolandGi1 man that would be awesome, thanks a million and I'll be watching for it or you could send to marcusmiles.1973@gmail.com

@marcusmiles568 3 жыл бұрын

Hello again, do you have this mapping for serato dj pro as i don't use tractor...

@dablkfatman 2 жыл бұрын

@@RolandGi1 how many projectors do I need for a similar set up, however using Serato DJ

@parsecmaingroove774 2 жыл бұрын

@@dablkfatman only one is needed. And a video mapping program that projects the image in all panels you want. I use Madmapper or Arkaos