Build an Arduino Laser Security System Alarm that Calls You!

  Рет қаралды 23,884

Max Imagination

Max Imagination

Күн бұрын

In this video we make a GSM (cellular) upgrade to one of my previous electronics projects, the Laser Tripwire Alarm (Security System) using an Arduino Nano and SIM800L GSM SIM card module.
The main proto-board features an existing light-sensitive (LDR) alarm circuit which works in conjunction with a laser diode to detect whether or not an intruder has tripped it. The board features a couple of NE555 timer ICs and a LM358 comparator.
Before recreating this project, watch how I made my original Laser Alarm with bare components here: • How to make a Laser Tr...
"Instatronic Web" was part of making this project possible, a big thanks to him for helping out!
Follow him on Instagram:
instatronic...
👉 Visit my online Storefront: sites.google.com/view/maximag...
----------------------------------------------------------------------
☕ Buy me a coffee: www.buymeacoffee.com/MaxImagi...
----------------------------------------------------------------------
Instagram: @max.imagination - max.imagina...
Instructables page: www.instructables.com/member/...
----------------------------------------------------------------------
Disclaimer: Amazon purchase links below are affiliate links. It doesn't cost you extra to buy through those and I just get a tiny commission. Thank you!
Check this website out to learn more about the SIM800L GSM module:
lastminuteengineers.com/sim80...
Project files:
SIM800L Wire-up/Circuit diagram (With 5V jumper wire): drive.google.com/file/d/1kvHL...
SIM800L Wire-up/Circuit diagram (With capacitor) :drive.google.com/file/d/1aGNo...
Alarm Circuit diagram 1: drive.google.com/file/d/1D_uh...
Alarm Circuit diagram 2: drive.google.com/file/d/1mY1T...
Project code: drive.google.com/file/d/15w8B...
------------------------------------------------------------
Components and parts I used to make this upgrade:
(x1) DIY Laser Tripwire Alarm board - from video: • How to make a Laser Tr...
(x1) SIM800L GSM/GPRS Module - amzn.to/3GnLe1A
(x1) Arduino Nano - amzn.to/3C8meJ4
(x1) 3.7V 1000maH battery/LM2596 DC-DC buck converter - amzn.to/3Wy9jbv / amzn.to/3VuY3LU
(x1)470-560μF capacitor - amzn.to/3PZzvJz
(x2) BC547 NPN Transistor - amzn.to/3WKYnqA
(x4) 10K Resistor - amzn.to/3Q1CTUd
(x1) 1K Resistor - (from resistor kit, link above)
Jumper wires - amzn.to/3VwvXzC
Jumper wires (short style) - amzn.to/3C8gOOk
(x2) Breadboard - amzn.to/3C8JF4R
Also watch:
Arduino-based Digital Thermometer; • DIY Digital Thermomete...
DIY Police light circuits; • How to make 2 Types of...
DIY Mini Oscillating desk fan; • How to make a Mini Osc...
-------------------------------------------------------
Video chapters:
00:00 Intro
01:21 Tutorial
03:35 Testing and finding solutions
09:20 Trying it out with the Laser
11:09 Outro
-------------------------------------------------------
Tags:
Laser Security System, Home security, IoT, Electronics, Arduino projects, Security system, Alarm system, Intrusion detection, Arduino tutorial, DIY home security, Home automation, Laser alarm, Laser diode, Laser module, Laser projects, Arduino laser projects, DIY laser security, Arduino automation, Arduino laser module integration, Arduino home security, Arduino alarm system, Laser-based alarm system, Laser surveillance system, Arduino security system tutorial, sim800l, diy, Arduino laser security, Arduino laser alarm, Arduino laser surveillance, DIY laser security system, DIY laser alarm, DIY laser surveillance, Arduino projects for beginners with lasers, Laser security system setup, Laser alarm system tutorial Arduino and IoT security, Arduino laser projects for smart homes, Arduino programming for laser security, Arduino laser projects step-by-step
#arduino #alarm #gsm

Пікірлер: 65
@MaxImagination
@MaxImagination 3 жыл бұрын
Hey everyone! The comment section has finally been re-enabled over the whole channel after 2 years by KZfaq themselves who shut it down in the first place. Glad to be in touch with my viewers again! :)
@maureenadegoke5446
@maureenadegoke5446 Жыл бұрын
I need help with the same project and I found yours on KZfaq
@maureenadegoke5446
@maureenadegoke5446 Жыл бұрын
Can I please 🙏🙏 have your Gmail address. I need help with this and I just have 7 days to go
@hertzmaddentv8304
@hertzmaddentv8304 2 жыл бұрын
Amazing project, Max!
@MaxImagination
@MaxImagination 2 жыл бұрын
Thank you! :D
@happyhsu140
@happyhsu140 Жыл бұрын
It's awesome I am going to try
@MaxImagination
@MaxImagination Жыл бұрын
Thanks for commenting. Great! Best of luck.
@sepaselavaki8018
@sepaselavaki8018 10 ай бұрын
I've follow your instruction up to the last, the arduino says "avrdude: cannot locate 'flash' and 'boots' memories in description"... May i ask Do you know whats the problem
@MaxImagination
@MaxImagination 10 ай бұрын
There might be an issue with your board or the code is too long for it (has run out of memory). Please try looking of forums for possible answers. Cheers.
@ramananbaskar6840
@ramananbaskar6840 9 ай бұрын
Would I be able to integrate a RPIF module in this? And possible a fingerprint option in the mobile app to turn off the alarm?
@MaxImagination
@MaxImagination 9 ай бұрын
Don't you mean "RFID"? I've never used either of them before so I wouldn't be able to help you on that.
@young_kdo9877
@young_kdo9877 Жыл бұрын
For the detection is it possible to use the laser sensor by itself to detect when something has tripped it? Can the laser itself tell you when its been tripped? Or is it best to use a photoresistor like you did here?
@MaxImagination
@MaxImagination Жыл бұрын
With cheap open-loop feedback lasers as the one used in this video, using a photo-resistor in combination is the only way. Cheers.
@motowiredexperiments
@motowiredexperiments 11 ай бұрын
Can you provide some final connection and diagram i want to use this sam for my gold shop security
@MaxImagination
@MaxImagination 11 ай бұрын
Hi there. If you take this diagram - drive.google.com/file/d/1D_uhYmozksXxdWo3acg8Hx82iUtmN3g7/view?usp=sharing and combine it with this diagram - drive.google.com/file/d/1aGNoy611j2GMb6tWYj79BROibZ3OKPLQ/view?usp=sharing you'll have a functioning circuit, as long as you follow the connection points labeled (Ard 1 & Ard 2, etc.) Cheers.
@motowiredexperiments
@motowiredexperiments 11 ай бұрын
@@MaxImagination thanks
@ramananbaskar6840
@ramananbaskar6840 8 ай бұрын
Can i use an ldr module instead of the circuit you built on your own in the previous video. Thanks!
@MaxImagination
@MaxImagination 8 ай бұрын
The circuit already uses an LDR module. Could you please be more specific? Cheers.
@ramananbaskar6840
@ramananbaskar6840 8 ай бұрын
​@@MaxImagination I mean a readymade LDR module available in the shops. Please look it up
@iamhasan213.
@iamhasan213. 9 ай бұрын
I subscribed
@MaxImagination
@MaxImagination 9 ай бұрын
Thank you!
@abednegoonsongo9652
@abednegoonsongo9652 4 ай бұрын
I used a 470uf capacitor and a 560uf capacitor but still the sim 800L is not connecting to the network, what might be the problem
@MaxImagination
@MaxImagination 4 ай бұрын
The power supply may be the problem. What power supply are you using?
@mochidarshan6748
@mochidarshan6748 4 ай бұрын
What to Select in Other Board and Port in Arduino IDE
@MaxImagination
@MaxImagination 4 ай бұрын
Select Arduino Nano as your board and the COM port that appears when you plug in the board to your PC.
@Gluttony928
@Gluttony928 5 ай бұрын
can i use arduino uno board rather than a nano board?
@MaxImagination
@MaxImagination 4 ай бұрын
Yes, you can. The use the same chip and practically work the same, but are different sizes.
@abhaysachan2796
@abhaysachan2796 6 ай бұрын
can we use arduino uno instead of arduino nano
@MaxImagination
@MaxImagination 6 ай бұрын
Yes, as the pin-out and usage is exactly the same.
@just_joo2
@just_joo2 4 ай бұрын
What did you use for the coding
@MaxImagination
@MaxImagination 4 ай бұрын
A computer and the Arduino IDE.
@abednegoonsongo9652
@abednegoonsongo9652 4 ай бұрын
Hello. What are you using to power the Arduino
@MaxImagination
@MaxImagination 4 ай бұрын
Hello there. I used an LM2596 DC to DC buck converter.
@abednegoonsongo9652
@abednegoonsongo9652 4 ай бұрын
@@MaxImagination also i used a 470uf capacitor on the sim 800L but it still doesn't connect to the network what might be the problem
@ankitmandal3148
@ankitmandal3148 3 ай бұрын
Which SIM support GSM module....2G ..3G...4G..?
@MaxImagination
@MaxImagination 3 ай бұрын
This was 4G, I believe...
@shariffphotography884
@shariffphotography884 6 ай бұрын
really interested to buy like this, but from malaysia... can i ?
@MaxImagination
@MaxImagination 6 ай бұрын
The project, no, but you can probably buy the parts.
@abednegoonsongo9652
@abednegoonsongo9652 4 ай бұрын
Hi Max, after using the code you provided it just sends an sms on my phone saying Hi! Its the alarm. Type on to activate,, buy when i type on there is no response, please help me
@MaxImagination
@MaxImagination 4 ай бұрын
Hi. Are you sure you have credit on your mobile phone? Does the message get through?
@abednegoonsongo9652
@abednegoonsongo9652 4 ай бұрын
​@@MaxImaginationyes i have enough credit
@abednegoonsongo9652
@abednegoonsongo9652 4 ай бұрын
​@@MaxImaginationsorry i had made an error but i have corrected,,now the system is working 😊 thanks max for your help
@MarkJasonYT
@MarkJasonYT 2 жыл бұрын
hi idol max
@maureenadegoke5446
@maureenadegoke5446 Жыл бұрын
🤗
@MarkJasonYT
@MarkJasonYT Жыл бұрын
@@maureenadegoke5446 hi
@maureenadegoke5446
@maureenadegoke5446 Жыл бұрын
Do you know how I can reach Max? I actually need his help
@motowiredexperiments
@motowiredexperiments 10 ай бұрын
I made it all same but after typing activation password it doesn't perform further there is no response please help
@MaxImagination
@MaxImagination 10 ай бұрын
Hi there. Can you tell if your GSM module even works? Please try putting a 50 microfarad filtering capacitor across its power terminals, this might help it start up.
@maureenadegoke5446
@maureenadegoke5446 Жыл бұрын
I need help in executing this same project!
@MaxImagination
@MaxImagination Жыл бұрын
How can I be of help? What is the problem you're facing?
@maureenadegoke5446
@maureenadegoke5446 Жыл бұрын
Follow up and assistance generally to execute the project I don't want to mess up and leave it half way. But, if I have someone that follows up I would finish the project successfully
@abednegoonsongo9652
@abednegoonsongo9652 8 ай бұрын
Can i get a project report of this project
@MaxImagination
@MaxImagination 8 ай бұрын
A report?
@abednegoonsongo9652
@abednegoonsongo9652 8 ай бұрын
Yeah a project report
@MaxImagination
@MaxImagination 8 ай бұрын
@@abednegoonsongo9652 I don't have a project report of this. There's a video and resource files in the description for you to download. Cheers.
@abednegoonsongo9652
@abednegoonsongo9652 8 ай бұрын
Thanks you
@abednegoonsongo9652
@abednegoonsongo9652 8 ай бұрын
I like your project
@user-sq5jx4ir9d
@user-sq5jx4ir9d 7 ай бұрын
Source Code?
@MaxImagination
@MaxImagination 7 ай бұрын
Linked in the description.
@BLEE_mahanteshBonur
@BLEE_mahanteshBonur Жыл бұрын
What is it's cost
@MaxImagination
@MaxImagination Жыл бұрын
Price can vary from country to country. For me, around $20.
@naromsky
@naromsky 4 ай бұрын
Add this, add that. But why?
@MaxImagination
@MaxImagination 4 ай бұрын
Why what? If you find my project too complex, consider using only an Arduino board with the GSM module using more code to suffice for the features the green alarm board has.
@naromsky
@naromsky 4 ай бұрын
@@MaxImagination With respect, etc., one could easily argue the project was too complex for /you/.
Make a TINY Arduino Drone with FPV Camera - Will It Fly?
20:26
Max Imagination
Рет қаралды 743 М.
Каха заблудился в горах
00:57
К-Media
Рет қаралды 9 МЛН
ВОДА В СОЛО
00:20
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 31 МЛН
Smart Sigma Kid #funny #sigma #comedy
00:40
CRAZY GREAPA
Рет қаралды 19 МЛН
How to make Laser Security (Theft) Alarm using SCR - 1 KM Range
5:31
Anurag Projects
Рет қаралды 1,3 МЛН
How to Make Laser Security Alarm System for Students | Science Project
4:42
I built my own computer. by hand.
13:03
jdh
Рет қаралды 1,1 МЛН
Making the most EQUIPPED DIY Security Camera with ESP32-CAM
26:36
Max Imagination
Рет қаралды 347 М.
Workbench Essentials When Starting Arduino! (Beginner Guide)
8:14
DIY | Easy Arduino Laser Tripwire Security System!
6:04
RGBFreak
Рет қаралды 129 М.
Build an Arduino Pistol-grip Transmitter for RC Cars with 1KM Range!
22:05
Rate This Smartphone Cooler Set-up ⭐
0:10
Shakeuptech
Рет қаралды 6 МЛН
Look, this is the 97th generation of the phone?
0:13
Edcers
Рет қаралды 7 МЛН
Опасность фирменной зарядки Apple
0:57
SuperCrastan
Рет қаралды 11 МЛН
Samsung laughing on iPhone #techbyakram
0:12
Tech by Akram
Рет қаралды 6 МЛН