No video
Build: Driblet Micro Freestyle Drone (with Le Drib)
Рет қаралды 89,316
Күн бұрынLe Drib takes us through a build of his signature micro freestyle kwad, the Driblet! This is a very small 2in prop drone that is a lot of fun to fly, and easy to build.
Driblet Build Parts:
Frame:
rotorriot.com/...
Motors:
rotorriot.com/...
Flight Controller/ESC Stack:
rotorriot.com/...
VTX:
rotorriot.com/...
Camera:
rotorriot.com/...
Receiver:
rotorriot.com/...
- - - - - - - - - -
Support Rotor Riot by purchasing from our store:
rotorriot.com
Want to fly FPV like the pros? Start here:
learn.rotorrio...
Get Rotor Riot Apparel here:
rotorriot.com/...
Get Rotor Riot Motors here:
rotorriot.com/...
Get Pre-Built Drones here:
rotorriot.com/...
Check out the latest FPV Parts on the market:
rotorriot.com/new
- - - - - - - - - -
Would you like a monthly goodie box?! Check out Kwad Box:
www.kwadbox.com/
- - - - - - - - -
-Pilots / Hosts
Drew Camden [Le Drib]
Production Team
Chad Kapper - Executive Producer
Christian Kapper - Editor
www.rotorriot.com
@dcsmith5839 5 жыл бұрын
Build videos are great.Thanks for posting. Even better would be some kit bundling at the RR store,so all the parts are in one stop shopping,maybe with a discount or shipping break for buying the package
@Gawl88 5 жыл бұрын
This right here!
@hanslain9729 5 жыл бұрын
This would be great. Unfortunately some of the components they note are out of stock.
@filippodipillo8352 Жыл бұрын
I am absolutely obsessed with this drone, I have been watching all the videos of it ever sence it came out. I just finished building the Bubito diy kit and the Driblet is the next build on .y list as soon as I come up with the money to purchase it. Keep building amazing quads love following your work.
@dv3422 3 жыл бұрын
You're a boss dude. I did not realize you live or lived in Michigan. I live in Michigan, thought that was neat when I learned that. Great quality video as always.
@gearscb4768 Жыл бұрын
nice and clear motors
@Darksagan 5 жыл бұрын
Taco Bell usually gives me the driblets. Nice video.
@mostpandabear1167 3 жыл бұрын
Lmao
@jaydronezz 5 жыл бұрын
Thanks Drew, this video I found particularly useful when trying to work out which wire goes to where as regards to a smart audio, vtx setup. So many other videos I watch always assume prior knowledge of this and don't fully explain it in a simple manner like you did so effectively in this video, which can be particularly confusing and daunting for newbies like me. Thanks again 😁
@quadroneld4401 3 жыл бұрын
As someone who has never put together a drone before, I find it fascinating to see how much work and time it takes before you can start flying.
@rcrdps8144 5 жыл бұрын
Build videos,.... ahhhhhhhh,... I had no need to watch and probably only learned a nugget or two, but build videos are just good for the soul. No drama, just work. Like watching The Fab Forums for cars,.. And yeah,.. you totally got me with that explosion.
@hcarltonadams 5 жыл бұрын
These build videos are great, what would be greater would be before you release the video, have enough of the components in stock to fulfill 25-50 kits and a "Notify Me" button when the kits are out of stock. This will give you an idea of how many more kits you can assemble and ultimately sell. I know this hobby is about customization but until I build a few more quads, I'm not into customizing yet so getting a really good quad KIT is the best entry path. Your build videos drive sales but if you don't have a BUY IT NOW button with product ready to go, you're putting sales barriers in place. When the video get's old (what's that about a month) much of the impact is lost. I want to buy your stuff, make it easier for me.
@FlyerTuck 5 жыл бұрын
Sweet little quad.
@peterspartan-fpv2410 5 жыл бұрын
Nice job drew great to see you building quads again and gday from oz.
@Ratboycure 5 жыл бұрын
Looks great, nice job Mr. Drew and crew!
@killacovertops 5 жыл бұрын
Very detailed and professional build. Thank you for this! I wanted to order one of these and now with this just amped up the want even more haha. Def will be ordering from your store soon. Thanks guys!
@geoffreyrivet5183 5 жыл бұрын
Thanks for sharing your experiences !
@DroneMaverick 5 жыл бұрын
Your Driblet will be my first micro freestyle drone! Was looking for a link that had all the parts ready to order in one click, but no biggie! I'll just buy them all individually. SWEET!
@peterzingler6221 5 жыл бұрын
Better buy a toothpick lighter cheaper faster..
@BigAlFPV17 5 жыл бұрын
Awesome build video Drew!!
@jlarson42 5 жыл бұрын
Helpful build video. Thanks Drew 🤓
@ReillyGrandmaison 5 жыл бұрын
More videos like this please!
@thecreaturefpv9295 5 жыл бұрын
I’m impressed Drew actually used a heat gun and not just a lighter 😂 great video
@jjj25313 5 жыл бұрын
That was a hair dryer 😂
@maxiemusfpv198 5 жыл бұрын
Small and compact, Drib can relate ........ lol
@enzopedreira4640 5 жыл бұрын
Make a build video with Bardwell. Get a big frame and shove as many extra components as you can. Barometer, Gps, Esc Telemetry, etc... Super complex and interesting!
@Shingorani 3 жыл бұрын
you guys should do a flight test after these build videos
@lawlau8782 5 жыл бұрын
Awesome coverage on the build. I am a newb with quads. A lot of info. (I have been flying planes since 90s and soldering for E flying) Doing my research work on a first build project. Thx a bundle.
@chrisballer78 5 жыл бұрын
Wow that took a super long time! I've been waiting for this video for a few months. 3.5.7 you must have filmed this quite awhile ago. Thanks Drew!!
@BigDFPV 5 жыл бұрын
Sweet build!
@dubl_afpv6270 4 жыл бұрын
You gotta use flux bro, a serious game changer to making those pearly solder beads and your not having to hold heat to the wire that long.
@rayburgemeestre 5 жыл бұрын
I wish I'd have seen this video 6 months ago! 😝 Repeatedly I have been damaging my motors on a micro drone build by using screws that were too long. In my case I also had motor protectors so I didn't see what I was doing.. Also struggled with this SBUS / DSMX. Thanks for the great video
@yannickg6904 5 жыл бұрын
Cute little thing. Tiny leds on the arms would be a nice add-on.
@doktordrone 5 жыл бұрын
Thank you very much 🙏👍
@foxtrotfpv8476 5 жыл бұрын
I need one of these they look really neat
@_Brando_69 5 жыл бұрын
Nice really in depth man. Great video I want one now. Lol
@jumpstartfpv 4 жыл бұрын
Focus is all over the place.
@DJDevine 4 жыл бұрын
Nice for a 2" but 2" is a tough class... Especially Now with toothpicks and twigs + the old favourite 2.5" rippers! Maybe it's time for a 2.5 or a light 3"?
@HattashFpv 5 жыл бұрын
Great video!
@LeoBNR32 5 жыл бұрын
Yeah, finally, thanks a lot man :) Keep up the great work!
@craigbalzkays2793 5 жыл бұрын
Sick I miss rr builds
@ItzAnthony 4 жыл бұрын
The links aren’t working
@idozor99 5 жыл бұрын
Love the builds videos, keep em coming!
@hetlarfje 5 жыл бұрын
I prefer silicone fuel hose for rc cars as spacers. Cheaper and a little extra soft mounting.
@rcrdps8144 5 жыл бұрын
Good idea. I'll keep that in mind next time I drop one into oblivion.
@joegirty6609 5 жыл бұрын
Sweet. been waiting for this.
@KnightFlyer 5 жыл бұрын
Nice! Great video yo Idk why but the word driblet makes me thirsty lol
@x_fpv3357 5 жыл бұрын
Nice Video!
@blakemiddleton9354 4 жыл бұрын
Music from lift off
@theronin48 5 жыл бұрын
I've stepped down from 250 to 150 and now I'm flying a 95mm lol. In So Cal where people hate drones it's the only way to be able to fly just about anywhere without getting "the look" lol.
@bowser1252 5 жыл бұрын
I hear you but it also depends on where you fly. I rip the local park and acro my X-class and people are amazed by it. Then again I don't fly like an idiot, I don't fly over people and fly close by.
@SkyCandyVisuals 5 жыл бұрын
Great video for beginners good job Drib and you flew it at the end a lot of gurus dont do that. they make an hr long video then don't fly the drone. lol nice job @rotorriot
@nsjey 5 жыл бұрын
I like how he goes from start to airborn, others do not show the computer setup part
@softsmoken 5 жыл бұрын
Alright build videos 👍
@Swarph 5 жыл бұрын
well, i guess this will be my first build! youve gone to all the effort making the video it would be rude not too!
@dimbatfpv7860 5 жыл бұрын
Didn't you start the driblet build video as a series a long time ago and then just not finish it?
@windowwasherfpv3485 5 жыл бұрын
Nice. I need a micro... after 2 years of flying iv never owned one
@boogiefpv1982 5 жыл бұрын
Drew i love this lil guy!! I'm slowly moving to 2 & 3inch micros Cse it's cheaper & funnier 2 FLY! Meaning in right places & peeps don't mins as much as a 5inch, feel me! Anyhow, enjoy summer! 😊 FLYING, NEVER SAY LAST PACK!🤙😜
@m.s.aviation7065 5 жыл бұрын
ME: team liftoff music and Spektrum. DRIB: team Spektrum. RANDOM DUDE: HMMMMMM?
@dragonwingfpvbyespenlossiu3808 3 жыл бұрын
@LeDrib Make an HD version of this, with a vista!
@mattraymond2935 5 жыл бұрын
props out FTW
@danieldimitri6133 5 жыл бұрын
I wouldn't soft mount the standoffs. I'd think the whole weight of the stack could act like a pendulum and have a resonance. I think the gummies on the fc are all you need. Also if you use m2.5 standoffs you can use those brass spacers they sometimes pack with servos to go inside the soft mounts so that you can actually get the nuts tight without over crushing the isolators
@NaTeYT7 5 жыл бұрын
the extra connector on the esc cable is for a buzzer
@Pusman 5 жыл бұрын
Hi guys! I'm here because I found a wrecked drone at a beach in Asturias (Spain) with a GoPro attached on it and some footage of its last flights (including the very last one... The videos are from the 19th of may 2019). I came here because the GoPro has a sticker from this store. I know nothing abouth the owner, so if anyone knows about someone who lost his drone here, feel free to contact me. Also, if you want to share this message through social media, please do so. I don't have too many followers, and I don't know any "drone pilot". Let's find the guy, or at least try it! Kind regards!!
@Pusman 5 жыл бұрын
A little disclaimer: I just want to reach the owner to bring him the sd card, because I think it's the only thing that still works. The goPro turns on, but then goes off again; and the drone it's full of saltpeter and I don't think this thing will fly again :/
@Legacy2.00 2 жыл бұрын
Never mind , I finally found it , it’s called Fabreeze by nighttime burnout
@francispointofview7578 5 жыл бұрын
Brain3D makes an accessory kit for the Driblet!
@synfpv007 4 жыл бұрын
This is why I like NBD beeciever - you dont have to bind via CLI! :)
@mehulanand8623 5 жыл бұрын
No 2 inch beats a gremlin
@samavella8831 2 жыл бұрын
Thanks for the great video and frame. Job well done. Is it possible to cut a Caddx Vista with an AIO FC? Thanks.
@soli3605 5 жыл бұрын
After this vid I REALLY wanted to rip my own Driblet... but I left my PC with lift off at work..... You alright Drib? Your voice was a bit wavy today.. you're usually confident and firm... all the best for RR team can't wait to get my CL1 (or Floss by Bob, soz) with JB AIO and hype train Drib motors, Hahaha Alex need to make some CPT vanny props or vtx and/or cam ( can't have 2 JB product on the one build :P ) Love your work guys
@juneloko619 5 жыл бұрын
Yo yo sup#TEAM LE DRIB
@jjj25313 5 жыл бұрын
Cool, I never knew that you can't use tx3 and rx3 at the same time.
@cheshirerc 5 жыл бұрын
#@*! that explosion after you dropped the camera really made me jump out of my skin. Enjoyed the vid, really nice build, gonna be with quality components like that. Peace The Drib.
@florianlepriol 5 жыл бұрын
LOve it ! :)
@sampathgajalakshmigajalaks5408 4 жыл бұрын
Hey!!! nice video but the parts linked in description are showing that page is not found. Kindly make a way for me to buy these products. Thank you.
@alexchalmers7857 4 жыл бұрын
Why do the links not work? What stack is it? Is there a way to put the list of components so we can find them?
@veronly2 5 жыл бұрын
40:18 I would say if you put it on a 4n1 the 4n1 should have it so that the motor is the right way the first time (hobbywing esc for example does this)
@filippodipillo8352 Жыл бұрын
If I want to build this exact dron in this video except I have an FRSKY Qx7transmitter what receiver would work best? I have never built a drone before
@spikethorn2 4 жыл бұрын
You need to get a new tip for your soldering machine... Damn that's a fat tip!
@rudyrivera654 5 жыл бұрын
What size 3S battery do you recommend . TIA
@Acetacy 5 жыл бұрын
Now I need a driblet 🤦♂️
@gandaulf_fpv6925 3 жыл бұрын
I don't see this frame on the rotor riot store page? where can you purchase? Thanks guys! Maybe I'm just missing something.
@ss3d701 5 жыл бұрын
3.5.7? Did you record this video some time ago or did you not update betaflight?
@peterzingler6221 5 жыл бұрын
Bf 4.0 has many many issues one of them is that Spektrum receivers don't work
@freeride200 4 жыл бұрын
nice one i like the looks!! can u show alternative links becouse yours are not working yet? greetings
@jeffkatcher4210 4 жыл бұрын
The link doesn't work.... Maybe the driblet isnt on the RR website anymore?
@invisibleaznDJ 5 жыл бұрын
motor screws will ark even if not touching the windings.....at least thats what someone in support said.
@peterzingler6221 5 жыл бұрын
Of course they will not its not like they run on 10.000v
@hillbillyfpv3 4 жыл бұрын
So, is the Driblet a passed thing already? They're "out of stock" everywhere (even Xhover).
@vincertron 4 жыл бұрын
I want one too
@hudsonlawrence7197 4 жыл бұрын
I found a frame on get fpv and everything else is in a video in the description from le drib on the driblet
@mbrsart 4 жыл бұрын
Shoot I was going to follow this for a first build, but the motors are the only link that doesn't give a 404.
@AGILISFPV 4 жыл бұрын
Dont worry man this thing is outdated at this point.
@mbrsart 4 жыл бұрын
@@AGILISFPV Shooting for an Armattan Tadpole instead. Little bit more current.
@bota_fpv9343 2 жыл бұрын
what battery capacity should i buy for this driblet
@eyal4 5 жыл бұрын
unrelated question - I have just bought a brand new flysky i6x. can I use the USB cable that comes with the transmitter in the box to work with a drone simulator on the computer?
@joey4233 5 жыл бұрын
Do you need the capacitor
@jimgolden5761 5 жыл бұрын
Drib- got a link to your BF4 rates? I’m loving my Driblet! Great job!
@Zattoo20 5 жыл бұрын
he dont post it yet :(
@marc_frank 5 жыл бұрын
i just finished designing a frame that's lighter, uses bigger props and has top mount
@mikeystokes9403 4 жыл бұрын
What other frame do you recommend your link doesn't show the frame anymore
@StrokeOfJustice 5 жыл бұрын
Any idea when that link to the Rates and Tuning CLI will be available?
@dreamystify4748 4 жыл бұрын
Frame and flight controller/esc stack links broken
@Lunchbox-ft5qj 4 жыл бұрын
is this not available anymore?
@amen_ra6926 4 жыл бұрын
What's with the busted links??
@theronin48 5 жыл бұрын
What's the max stack height? I'm tempted to make a micro hd ripper with this but prefer aio ESC to keep weight down.
@Yota_Freak 5 жыл бұрын
What was that extra mounting screw kit?
@stateline6000 5 жыл бұрын
so its the mamba stack hmmmm which one........
@DjKory 4 жыл бұрын
Hi Rotor Riot Guys, Can i order this frame and parts or this is not avaible anyomre? Maybe in Europe ? :D Thx. Greetings from Hungary!
@xliver4 5 жыл бұрын
Why is the capacitor needed/ what does it add?
@peterzingler6221 5 жыл бұрын
It filters system noise
@DrewDrager 5 жыл бұрын
Also reduces voltage spikes when plugging in the battery. Safer for the FC
@thfpv4974 3 жыл бұрын
Is there a DIY KIT ?
@DjOlidang 5 жыл бұрын
i want one
@gunngin3586 5 жыл бұрын
Can i use 2.5 inch props on this?
@Legacy2.00 2 жыл бұрын
Le Drib , what song is that ?????