BUILD GUIDE: SLAB

Рет қаралды 19,830

Күн бұрын

SIllybutts is a maniac when it comes to designing blasters, and Silly's Lever Action Blaster (SLAB) is one of his best designs yet. Depending on the spring you choose, it's a satisfying and fun springer for plinking, super-stock, and HvZ; surely it's the primary you bring to your next game.
While Sillybutts also has a video tutorial, we thought we could improve on it and update it to the current file set in our crystal-clear build guide style. We hope you enjoy and find the blaster fun to build along with us!
• • •
Don't forget to watch our Tips & Tricks guide for everything you need to know about your blaster when it's fully assembled:
• SLAB Tips, Tricks, & T...
Want to build a SLAB yourself? Our 3D Parts + Hardware Kit is available here:
outofdarts.com/products/slab-...
Already printed the parts yourself? Our hardware kit is available here:
outofdarts.com/products/slab-...
Want more foam-flinging content? Subscribe to our once-monthly Newsletter!
outofdarts.com/pages/e-mail-s...
Have questions about a product? Need help modding your blaster? Shoot us an email!
orders@outofdarts.com
Follow me on Instagram for sneak peeks:
/ outofdarts
For everything else, find us at:
outofdarts.com
• • •
FAQ & Corrections:
•
• • •
0:00 Opening & Introduction
0:28 Tools Required
1:04 What's Included & Other Resources
1:26 Assembling the Iron Sights
1:52 Assembling the Stock
2:50 Assembling the Lever & Trigger
5:27 Assembling the Magwell
7:23 Assembling the Plunger
8:45 Assembling the Turnaround
9:43 Installing the Plunger Tube
12:16 Assembling the Catch
13:44 Assembling the Front Trigger Linkage
14:10 Installing the Foregrip
14:39 Assembling the Top Rail
15:49 Assembling the Rear Trigger Linkage
17:13 Installing the Trigger Assembly
18:37 Installing the Plunger Assembly & Barrel
20:08 Final Assembly
22:55 Installing the Silly SCAR
23:22 Tuning the Trigger Linkage
24:25 Firing Demo & Closing Remarks
• • •
Out of Darts, run by Luke, is a one-stop hobby shop for all things nerf, foam-flinging, and blaster tag. We carry all the supplies, tools, and accessories to make your modding journey easier! We create original 3D-printed blasters and mod parts with almost 100 3D printers. Check out our site below for guides, build lists, and resources.
Edited by J Perry Heun, Out of Darts Media Producer
‪@Sillybutts‬

Пікірлер: 41

@outofdarts Жыл бұрын

By chance, we published this tutorial right as Sillybutts announced his new bolt action blaster: Cynthia. Check out his video and send him some love! kzfaq.info/get/bejne/o6-HY8dy3rWnpmQ.html

@Sillybutts Жыл бұрын

@millermdiehl Жыл бұрын

Thank you so much Luke for giving me the replacement part to my Proud papa. you don’t know how much fun I’ve had with it. thank you so so so so much!!

@Arcturus1239 Жыл бұрын

I literally just started printing my slab and this came out 😂😂

@m00k61 Жыл бұрын

I love these videos. You guys walked me through my first flywheel mod and helped me with several other blasters. You guys rock.

@outofdarts Жыл бұрын

Thanks for your support!

@borderlineaxo1375 Жыл бұрын

i do not have a 3d printer, nor do i intend to purchase the kit at this current point in time, nor do i remember subscribing to yall, but this was actually really interesting! nice video!

@outofdarts Жыл бұрын

Thank you!

@MadMax-rm5mh Жыл бұрын

Great video! This is Jim, a member of the Kansas City Nerf Club. I won my club's raffle for a hardware kit last weekend and chose this one. I'm not the best at modding or building blasters yet. Another club member will assemble/tune the SLAB with me looking over a shoulder or perhaps building/tuning with my shoulder being looked over. Videos like this are extremely helpful and appreciated.

@stevenc485 11 ай бұрын

This is by far and away my favorite blaster. Purchased a parts from you last December and a second parts kit yesterday. Thank you for the excellent service and this build video!

@outofdarts 11 ай бұрын

You're welcome! Thanks for supporting Sillybutts and the shop!

@TheSouthernSteamThing Жыл бұрын

I haven’t even bought a SLAB but this is still entertaining to watch

@BleekBrown Жыл бұрын

Perfect timing, I just bought mine yesterday from you guys!

@combustablelemon14 Жыл бұрын

Im consistently impressed with how professional outofdarts is and how much you do for the hobby. Look out for my build in a week or two, ill proudly mention who i got the hardware from

@outofdarts Жыл бұрын

Thanks for your kind words, and for supporting the shop!

@ThePrintHouse Жыл бұрын

Yo I LOVE this!!

@tenacminotauro9541 Жыл бұрын

Hi, Luke. You have a great shop. Once you get your hands on a Unicorn could you check compatibility with the Harrier side(bolt) prime and Crooked Cousin/Little Rocket comfortability, please. Please show it in the review for visual reference, too.

@outofdarts Жыл бұрын

Will do!

@supernerdlove4979 Жыл бұрын

I can not find the front sling piece you use in this video. I’ve gone thru the files and found other pieces for that area but not the one used in this video.

@Raisin_Bran. 4 ай бұрын

Click on (experimental and optional) folder then click on (long plunger rods that stick out the front) folder. The front sling piece that Luke is using is called (Muzzle_BottlenoseSling.stl)

@stuntmatt7124 Жыл бұрын

Wow, is that thing cool.

@m00k61 8 ай бұрын

This might be a dumb question but after you add the loctite to the threaded rod is it still possible to turn it to tune it?

@ASMRKlotz Жыл бұрын

@OUT OF DARTS I know this isn't what this video is about but I was wondering if you all know a good place online to learn about designing your own 3d printed blasters. I personally already have a background in 3d modeling and I can figure out the printing stuff so I am looking specifically for the mechanical design/engineering side of it. I know I could just take mechanical engineering classes but was wondering if there is a good resource to learn as it applies to foam flinging blasters specifically? Thanks.

@user-ov6bi6lc7s 7 ай бұрын

What printer do you use for all your 3D printed blasters?

@edgardejesus9255 Жыл бұрын

Having trouble de-priming ! What do I do?

@Losyde 9 ай бұрын

Are these 4-40 3/8 flathead screws? Seems to be the standard for nerf.

@deadlydonuts6666 Жыл бұрын

Hmm, does anyone know if Out of Darts takes suggestions on blasters? Like, if a fan had a idea could we share it somewhere?

@Lion_McLionhead Жыл бұрын

Holy hairpieces that took a lot of farsteners.

@m00k61 8 ай бұрын

Question, has anyone designed a side panel with picatinny on it? If anyone knows of one and could possibly help with a buy link that'd be awesome. I don't have a 3d printer. Thank you in advance!

@TWDragonflyTommy 2 ай бұрын

what if i use that catch in the lynx...........

@zombie3070 Жыл бұрын

Out of darts plz reply I have an idea for a blaster and can you tell me what the flaws are The idea is: what if you had a machine pull back a spring but that would be slow so have 2 or 3 springs and have an accurate automatic blaster that shoots fast

@watchm4ker 9 ай бұрын

That's called an AEB. They do exist, and Silly has been working on one. They're very common in Airsoft, but foam darts need roughly double the spring energy to fly the same speed as a BB pellet.

@dakotastahl5101 Жыл бұрын

How much

@yemu8045 Жыл бұрын

Y'all ship to PR? I don't see any option to ship to PR

@tobi9898 Жыл бұрын

Hi Luke, I would like to order something from your shop, do you also send to Germany?

@outofdarts Жыл бұрын

We do ship a limited selection of parts and hardware to Germany and other countries in Europe. However, due to shipping and customs issues, we're no longer able to send fully-assembled blasters outside the US and Canada.

@luckyz0r Жыл бұрын

@@outofdarts I have a 3d printer, do you send the kit of all I can't print? I live in Belgium, we miss guys like you in EU :D

@jetpackdog3427 Жыл бұрын

Hey, doubt you'll see this, but for a while I've had this really funny idea for a nerf mod: A judge, with an auto-compressor, that shoots rockets. What do you think?

@baosnerf8230 Жыл бұрын

Is it bad to dry fire this blaster?

@watchm4ker 9 ай бұрын

It's generally a bad idea to dry-fire any strong piston blaster. With a clear path to the muzzle, there's no back pressure to decelerate the piston, and it'll slam against the end of the cylinder

@xrp3robot Жыл бұрын

One thing to note, it would not be hard, nor a bad idea, to get two nuts on the threaded rod above where one's hand would grip it so that you can deprime the blaster without firing and it's not so awkward trying to balance the blaster, hold the sling lever, and trigger it from the back.