Channel members get early access and video shoutouts: / @mattie_y Music by / @officialphilman Vivaldi's Winter: • Winter - Vivaldi [COPY... 10 AM and 2 PM from Lud and Schlatt Crossing: • Lud and Schlatt Crossi...
Пікірлер: 329
@jacobpalomarez53497 ай бұрын
nothing can quite describe the genuine panic i felt when i watched you actually turn on that dryer.
@mattie_y7 ай бұрын
it freaked me out when i filmed it
@ibisgamer22817 ай бұрын
@@mattie_ywhat were you thinking!? then again that gag quenched some primal urge inside me to see a nurf gun in a dryer? I have no clue but it quenched something
@mattie_y7 ай бұрын
its the quenchiest
@cosmicsnacks11917 ай бұрын
@@mattie_yDRINK CACTUS JUICE
@TwinBlades17 ай бұрын
@@cosmicsnacks1191no
@chez24857 ай бұрын
Goes from harmless nerf gun to painful nerf gun in about 10 seconds, love it
@cj_games8205Ай бұрын
hehe 269 likes
@jangschoen10197 ай бұрын
I just love that unscrewing equipment is becoming a running gag. Also, I was expecting sabots at the end, but a 3d printed dart also works.
@mattie_y7 ай бұрын
you’ll never see me use a screwdriver
@ANameToGoBy7 ай бұрын
@@mattie_y Why would you? Clearly what you're doing works!
@agiliteka7 ай бұрын
a sabot would be sick to see, might not work at this scale, but a subcalibre dart might go a long way
@aidanlimhuadenghshs7 ай бұрын
As a nerf and firearms enthusiast, I thought of tapping gas out like a real rifle when I heard about the dart bursting. If your theory is correct, by drilling a hole near the end of the tube, excess "gas" will be tapped out and you can use it to load another dart /j For those wondering, that last bit was for real rifles. But in this case, I suppose just having a tapered hole near the end of the barrel can possibly remove excess air. Matt, you should really try this and put it back into the shell and do cosmetic mods and make it cooler! Although this was cool enough. Seeing your streak of pressured air blasters, what about using the tapped gas into a extra gas chamber, then using the extra air, why not make a masterkey? Im no engineer but using my logic, it is possible to do so. Also, I almost had an aneurysm seeing you put the blaster into a dryer- I should do that too XD
@gdplayer197 ай бұрын
Maybe a curved end like a blunderbuss so that the air escape isn't as harsh?
@Katvanished7 ай бұрын
I was thinking the same thing. drill some holes in the long barrel, then stick a "muzzle break" over the real muzzle break to make it look good
@trap93887 ай бұрын
I think the issue is that the dart bursts before its hardly even moved, the air slams into the dart and bursts it before it reaches any real speed. Maybe isntead he could either use some form of packing material/wadding to absorb it, or use harder darts. the longer barrel was a good idea but maybe not long enough.
@tovarisch34907 ай бұрын
Maybe you can redirect the air to push back a piston that can do something in a similar fashion to an AK
@aidanlimhuadenghshs7 ай бұрын
@@tovarisch3490 Thats the inspiration haha
@Bushydem0n7 ай бұрын
The commitment to the unscrew dryer is amazing
@DoubleL118627 ай бұрын
I thought you might go with a few less pumps to fix the bursting issue. Then I remembered which channel I was watching.
@mattie_y7 ай бұрын
lmao
@f14e917 ай бұрын
I love that you also show what goes slightly wrong and how you overcome it! We need more people like you on this platform❤
@juancabardo217 ай бұрын
He modified a nerf gun just to save his channel members, what a guy
@ima_bread7 ай бұрын
I literally had a panic attack when you put it in the dyer and it fell apart
@VaIentineUK7 ай бұрын
Your videos always manage to be engaging, informative, funny and well produced. Surprised you haven't been at this much longer with quality like this.
@anatali1217 ай бұрын
This was my favorite blaster as a kid, traded a bunch of plastic lightsabers for one! Something that you might know already, but could be useful if you don't, is that this one came with special high density foam darts with solid plastic inserts as reinforcement. Your final 3d printed dart design is not far off how the original darts worked! If you wanna look into it more, they were called "Buzz Bee Extreme Darts" and the stock blaster can do 3-6" groupings at 50-60 feet with them!
@mattie_y7 ай бұрын
wowee!
@ANameToGoBy7 ай бұрын
I love the idea of a Nerf war (with like jolts) and some guy comes up with a long thin tube, ready to wreck people from a distance.
@mattie_y7 ай бұрын
toob
@Sanguivore7 ай бұрын
To be fair, in the hobby a lotta people used to use exactly that back in the day. Long, thin, powerful tubes may not be the prettiest, but they can be darn effective!
@shittetharse7 ай бұрын
*"IT ISNT FUNNY ANYMORE, STOP WAKING ME UP!"* *"BUT BABE, MATT YUAN JUST UPLOADED!"*
@seegurke20217 ай бұрын
I am just a little Boy from germany and i dont matter to someone Like you, but i wannat to Say thank you for These amazing videos! (Thank you?)
@mattie_y7 ай бұрын
you are welcome!
@seegurke20217 ай бұрын
PS: I‘ve always Wanted to build something Crazy Like this, because i am an Hobby-Engineer And i did it once with a Nerf Stryfe. It didn‘t work. Can you maybee build a Nerf shotgun off a Insectizide sprayer? Ist’s my biggest Dream to do this myself and i Really want to se it come Alive with your channel.
@busyyoungexec8 ай бұрын
Whew! I was worried for a minute 😅
@nathanwatson2967 ай бұрын
Love the commitment man. Keep up the good work!
@LittleMissLuna2327 ай бұрын
Another goated Matt video, lets GOOO
@Sam979797 ай бұрын
If you were my roommate, you would've waited until 2:00 AM to film the dryer unscrew process. That was so loud! Great video, keep it up.
@Teku667 ай бұрын
I have no complaints that the algorithm recommended me this video
@image_cafe73437 ай бұрын
Matt’s disassembly methods are really efficient
@funnyname70537 ай бұрын
Absolutely love the content bro, keep going!
@kaleoshepherd51747 ай бұрын
THE LEGEND HAS POSTED EVERYTHING ELSE DOES NOT MATTER(except taxes dont commit tax evasion)
@mattie_y7 ай бұрын
tax evasion bad
@lukemagee82077 ай бұрын
taxes can wait
@ALuLdz7 ай бұрын
@@mattie_ytax evasion good, don’t lie to your fans
@tylerwilliams337 ай бұрын
Nice to see somebody else running that sniper the same way.
@Oriox_7 ай бұрын
love a good bit of vivaldi whilst wathcing a nerf video at 10 30 pm
@mattie_y7 ай бұрын
🎻🎻🎻
@ibisgamer22817 ай бұрын
How has your channel not become viral yet!?
@mattie_y7 ай бұрын
remember to smash that like button
@adammee54377 ай бұрын
The dryer scene lol great stuff 👌
@thegarbageman86857 ай бұрын
matt deserves more views
@JacobHGamez7 ай бұрын
Awesome!!! Dude, I love the videos!!!!
@Heavy_weapons_guy7 ай бұрын
Snipers a good job mate 👍
@Zippy_TF27 ай бұрын
Professionals have standards
@nathanrollick18337 ай бұрын
I like how you try to tell a story in your videos and make them fun. You're doing well. Keep improving and learning. Don't stay the same.
@Jvalde20217 ай бұрын
Now you have an effective defense against haters
@UhOhBurntmeToast7 ай бұрын
My boy, let me start by saying I watch a lot of KZfaq. But sweet heavens do I love your content SO much man. Absolute gem of a channel you have. I’m forever in your debt and I eagerly await every upload. An unsung legend you are ❤️
@mattie_y7 ай бұрын
tyvm!
@bryonzajicek24197 ай бұрын
What if for the 3d printed darts you increase the barrel length or increase the amount of compressed air that it could hold cause I think that it might increase the accuracy
@Shinoo_B7 ай бұрын
4:58 Really wasn't expecting it to make that noise
@TheSpookiestSkeleton7 ай бұрын
I just wanna say before I get further into the video, that buzz bee hunter was da bomb, like, I loved that thing and it could shoot so damn hard, had a bipod and a scope, loved it as much as I did the pump action drum one with the shells
@inkycat1917 ай бұрын
you could’ve gave it a even longer barrel my man, that would’ve made the muzzle velocity higher
@FuknKms7 ай бұрын
Now take this to a game.
@shinig4mi0mega977 ай бұрын
I remember seen thebackyardScientist have the same issue with the broken darts, and they put earplugs so the air woudnt go inside them and blow them.
@the_annihilator58107 ай бұрын
"Look a safety restriction! With this knife we..."
@rostringstudios40957 ай бұрын
Could you design some Rifling into the 3D printed nerf? Something to induce spin
@dd22207 ай бұрын
Every day is a good day when Matt posts
@AWB27 ай бұрын
You should try adding rifling with a screwdriver
@Jawire2286 ай бұрын
Bro, when he was looking for the channel members, he bent down and farted😂 0:27
@teresashinkansen94023 ай бұрын
I think you could glue a reinforced tube inside the dart so its what takes all the pressure and not the soft foam body, also adds a bit of mass to make it go further.
@plumsisaac4237 ай бұрын
He just needed a muzzle brake
@jannickliche70807 ай бұрын
This is just wholesome!
@mattie_y7 ай бұрын
aw thanks!
@floridaman38947 ай бұрын
Good work keep it going
@DBZLEGENDS2 ай бұрын
To fix this problem you need a 1 inch long piece of 3/8 pex in a brass barrel and thats it. Ive tested this with this gun and its about 215 fps. 3/8 pex is also perfect for a anti suction spacer for most applications.
@plumbinggamer7 ай бұрын
The pain of hearing the noise of a nerf blaster in a washing machine. Nice modifying!
@benjaminborscevsky301Күн бұрын
You can make a few holes near the muzzle to drain the pressure before walls of the dart will get torn due to lack of containing force provided by walls of the barrel
@matildastanford7019Ай бұрын
Superglue darts to harden them up also maybe add & glue a thumbtack to front of dart to increase dart weight. More mass equals more inertia.
@floppydisk45007 ай бұрын
If you put a little bit of rolled up packing tape on the inside of the barrel of the foam dart, it'll prevent it from exploding
@triciablouin27767 ай бұрын
As soon as I heard four seasons playing I immediately got guts and blackpowder ptsd💀
@Spanishfluwillreturn20257 ай бұрын
Your an epic nerf tuber reminds me of the og days of nerf modding
@Kekatronic7 ай бұрын
That thing at the end is basically an assassins weapon, all it needs is poison on the tip of the darts
@frostybootz5 ай бұрын
1:31 “Disassembled The Blaster modder Way”
@VenkmanPhD7 ай бұрын
I had a LOT of success with an Airtech 3000 and using brass barrels, plugged pump and removed air restrictor. 6 shots, auto rotate, a WALLOP of power. I also used Frost king foam to make my own darts, so they couldn't explode. Old ones would still have their heads ripped off, but yeah. Would love to see you tackle that blaster
@mattie_y7 ай бұрын
i do want a at3k at some point
@allaltitudeproductions4547 ай бұрын
well do remember, power does not = accuracy
@theprancingprussian7 ай бұрын
May i suggest, rifling?
@Tucher977 ай бұрын
A nerf sniper, if I were to squint, I would see the laser sniper from Star wars Jedi knight games.
@kitotek7 ай бұрын
I like your fun disassembly methods, too bad they don't actually work. (although there are some machines which can automatically remove screws)
@rex01947 ай бұрын
4:07 me when I was 12 shooting nerf guns out my window
@redninja_7 ай бұрын
now build the shell.
@kozike74886 ай бұрын
You can make the darts stronger by wrapping them in a layer or 2 of packing tape and trimming off the excess, you might need a wider inner diameter on your barrel though
@kennethpaschall68117 ай бұрын
Making a dart in the general shape as a mortar will most likely give you much more accurate shots also what model of Nerf gun is that so I can find where to get one
@AlexLanyu8 ай бұрын
Saved Pog
@mattie_y8 ай бұрын
ur welcome
@ardaseymenoglu15688 ай бұрын
:mattyuan
@ardaseymenoglu15688 ай бұрын
Damn i failed
@ardaseymenoglu15688 ай бұрын
@why_are_the_fish_talking7 ай бұрын
You know your nerf gun is strong when you can hear the bullet whizzing by.
@mattie_y7 ай бұрын
nnnnnnnneeeeEEW
@JuonQi7 ай бұрын
1:50 ty for reminding me to call her.
@huhanimationstudios62607 ай бұрын
At this point you could cook the blaster to unscrew it
@mattie_y7 ай бұрын
good idea
@mr.pineapple84527 ай бұрын
This is awesome
@cheese-ro9cs7 ай бұрын
In the first as minute and thirty seconds I could already tell he was a legend in the making
@musikSkool7 ай бұрын
Holes near the end of the pipe will let air out without the dart taking the pressure all at once. Though it is possible it is destroying the dart in the middle of the barrel.
@dogdog3577 ай бұрын
The idea of needing a muzzle break in nerf is scary. Wonder if a suppressor would work.
@chilledburrito7 ай бұрын
@@dogdog357haha, I don’t know about a suppressor. Though, in the modded nerf/custom nerf scene there are barrel attachments that add rifling for increased accuracy in springers.
@dogdog3577 ай бұрын
@chilledburrito Well I know scars are a thing. But I'm curious if adding a suppressor would 1. Help reduce the amount of air escaping the barrel through the dart and 2. Make the blaster quieter due to less air escaping as fast
@chilledburrito7 ай бұрын
@@dogdog357 1: It’s possible, I’d imagine it’s dependent on various factors that I don’t fully understand as I only really dabble in nerf, at least the physics part. but if the goal is to stop the dart from splitting, I’d check the barrel for extrusions first, and if there’s no problem there, I’d try a dart with less friction or firmer foam, if none of those work, putting some tape around the dart should stop the splitting, and the 3D printed projectile Matt made is an interesting way of fixing the problem LOL 2: maybe, I’m definitely not an expert on this specifically. I know for certain in a standard springer setup, the sound produced by the air is usually undermined by the plunger, and theres no point trying to put a suppressor on a fly wheeler. But since the setup Matt made, consisting of pretty much a valve and an air tank, it, itself should produce very little noise as you’d expect, and there are suppressors in Airsoft that can dampen the noise of the air exiting the barrel using a design very similar to an actual suppressor. It would probably only dampen it a tiny bit, it definitely wouldn’t be as drastic of a change as a real suppressor. You’d probably get better information from chatGPT than me to be honest LOL
@djangoWier7 ай бұрын
Make a scar barrel or even a slotted scar barrel, this allows the excess air to escape, fishing line scar barrel. I tride a tank mod with one of these years ago, it worked, but over powered and split darts, fluted scar fixed that.
@AdmiralJvnko7 ай бұрын
You look like my best friend Hero. Like, straight up identical.
@MontyLand3087 ай бұрын
i love these videos, they remind me of allen pan's older videos
@mattie_y7 ай бұрын
allen pan went back in time and im him
@MontyLand3087 ай бұрын
i knew he would be the one to invent the time machine@@mattie_y
@__Unlucky__7 ай бұрын
bro is really just a wish version of "i did a thing"
@jolttrontitan27557 ай бұрын
Being a nerf hobbyist, the moment you said foam darts won’t cut it and made plastic bullets… my giggles erupted, my heart sank and my grin widened out of control
@Tinkatink9577 ай бұрын
Cool video like usual 🎉
@wendieghostie7 ай бұрын
The cinnamon tography
@Xoticghul4 ай бұрын
How do I get the unscrewed cycle? My clothes be having a few too many screws
@BasementStudi0s2 ай бұрын
maybe this is why my friend was allowed to bring his nerf gun through airport security but not back
@GerinoMorn7 ай бұрын
You need gas port like on gas-operated firearm. Just drill some holes into the barrel about 1-1.5 lengths of the dart before exit - the gas will dissipate and the barrel will still be squeezing the dart to keep it intact :D
@shipe16274 ай бұрын
drill holes like 2 cm before the barrel ends so the pressure exits through them
@matthewnardin73047 ай бұрын
Could probably use a little fin stabilization if you're just going to make your own darts.
@mattie_y7 ай бұрын
nice name matt
@jamesrivera40157 ай бұрын
I feel like it's no longer a nerf gum since you changed every aspect of it, including the darts.
@ManOfTrades7 ай бұрын
Make your videos like 20 minutes! We want to really indulge in the nerf
@mattie_y7 ай бұрын
next video gonna be longer
@NarcoticZombie3 ай бұрын
I'm jealous, all my dumb dryer does is dry clothes
@Wobukala7 ай бұрын
I love your videos
@ThePlantedTankTV7 ай бұрын
If you could add rifling to the barrel it'd be much more accurate. Smooth bores are well know for being inaccurate.
@lanoche7 ай бұрын
No scar barrel at the end? Of course your accuracy would suffer.
@whooooosh12337 ай бұрын
ive never seen anyone use a pvc cutter for nerf guns ill have to try that
@inateinate9 күн бұрын
If you make a muzzle break, would that not allow the pressure to normalise while still giving the dart structural support?
@Rogiebear7 ай бұрын
Yay he uploaded
@ihaveagun26957 ай бұрын
i am so happy this guys growth recently i remember when he had only 400 subs
@mattie_y7 ай бұрын
😄
@ihaveagun26957 ай бұрын
hi man how are you@@mattie_y
@mattie_y7 ай бұрын
not bad not bad
@ihaveagun26957 ай бұрын
good@@mattie_y
@CaseyKettering7 ай бұрын
make a rapid fire minigun with a lot of power
@shadowpixelgun3d53212 күн бұрын
Now all we need is recoil
@filipbukowski59755 ай бұрын
make holes in the end of a barrel like an end of a high force rifle (barret m95) that should make it not break
@ChraeBB4 ай бұрын
If you aren't an Engineer by now, you should be. Particularly a Manufacturing Engineer, you're incredibly smart. with love, A Semiconductor technician
@Luc_s57 ай бұрын
I always love your videos ❤
@Cavemancat887 ай бұрын
What gun is that and where can i find it... I have some ideas...