Build The ULTIMATE 3D Printer Enclosure

Рет қаралды 49,709

Күн бұрын

This video is brought to you by PCBWay, your one-stop-shop for PCB prototypes and assemblies, flexible and advanced PCBs, laser cutting, and more! Visit jle.vi/pcbway
You guys asked for it. A full walkthrough of my custom designed, DIY 3D printer enclosure, including the various 3D printed features and add-ons I've put in like ventilation and filament management, and of course, how YOU can create your own similar DIY enclosure.
Oh, and stick around to the end... because I have some really surprising ones that you can even 3d print and use without a 3d printer enclosure to level up your 3D printing experience nonetheless.
💬 Join my Discord Channel: jle.vi/tnl-discord
And of course, a HUGE thanks to my first 3 Patreon supporters ever... tokyo2ooo, Scott Garcia, and
Daemon!
Want to see your own name on my 3D printing videos and DIY project videos? / thenextlayer
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
00:39 The Enclosure
03:14 Ventilation and Filtration
🛒 PC Fan: s.click.aliexpress.com/e/_DDH...
🛒 Temperature Switch: s.click.aliexpress.com/e/_Den...
🗿 Sturdy Holder for HEPA Air Filter by jonathanlevi on Thingiverse: www.thingiverse.com/thing:541...
06:28 Exhaust
🗿 Sturdy Holder for HEPA Air Filter by jonathanlevi on Thingiverse: www.thingiverse.com/thing:541...
🛒 Noctua 60mm Quiet Fan: geni.us/noctua60mmquietfan [Amazon]
10:00 Spool Management
🗿 Customizable Filament Holder by HugoHuge on Thingiverse: www.thingiverse.com/thing:302...
🛒 608 Bearings: geni.us/ballbearings [Amazon]
🗿 Short Filler Filament Spool System by Jonathan Levi on Printables: www.printables.com/model/1320...
11:53 Waste Management
🗿 "String Wrangler" Cover for Lack Trash Bin by Jonathan Levi on Printables: www.printables.com/model/2289...
12:24 Tool Organization
🗿 Universal Wall-Mounted Tool Holder by Jonathan Levi on Printables: www.printables.com/model/1320...
13:28 Lighting
🛒 LED Panels: s.click.aliexpress.com/e/_DDV...
15:20 Cable Management
15:59 Remote Monitoring
🛒 Raspberry Pi 4 Model B: geni.us/RaspberryPi4ModelB [Amazon]
🛒 Logitech C920x HD Pro Webcam: geni.us/logitechc920x [Amazon]
17:50 Electrical, Power Metering & Automation
🛒 Wifi Power Strip: s.click.aliexpress.com/e/_DdC...
🛒 Smart Switch: s.click.aliexpress.com/e/_Dkw...
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits | jle.vi/bambu (supports 3D Print General, who’s channel was deleted)
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com/
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
🔗 OTHER LINKS 🔗
👉 My previous video on 3D printing hardware you must have: • Make USEFUL 3D Prints ...
👉 My Voron build video: • I'm Building The Best*...
👉 My playlist on 3D printer accessories and tools: • 3D Printer Accessories
👉 My previous video on Gridfinity tips: • Gridfinity Tips: 3D Pr...
👉 My previous video on 50+ useful 3D prints: • 50+ Useful 3D Prints Y...
👉 Get FREE remote access, AI print monitoring, and viewing to your Octoprint-connected 3D Printer: jle.vi/obico
👉 Check out my Patreon page: / thenextlayer
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: / @thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: / thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprint

Пікірлер: 127

@thenextlayer Жыл бұрын

THANK YOU for watching all the way to the end. Make sure to hit the comments below and tell me everything I could have done better! I love it! (Seriously!)

@bachremboy 7 ай бұрын

@ModBotArmy Жыл бұрын

Really nice enclosure. I have gone around and around with custom versus off the shelf solutions. My biggest issue is how often I move machines around. Plan was to measure all printers and see if I could find a common size to base the enclosure cubby’s off of. 😊

@thenextlayer Жыл бұрын

Yeah, I feel you. I will have that issue if and when I move to a new studio :)

@PCBWay Жыл бұрын

Caught you there😊. Wish you and your family a big Merry XMAS 🎄🎄

@netpackrat Жыл бұрын

ModBot; I bought the Wham Bam enclosure based partly off your recommendation, and I have been fairly happy with it. Thanks.

@ModBotArmy Жыл бұрын

@@netpackrat oh man I love that thing. For a quick setup to print with higher temp it works really 😊

@maxrichhart4929 Жыл бұрын

YES! I was hyped for this vid! The lighting tips were immensely helpful with the enclosure I’m making. I was literally going to work on lighting today, thank you!

@thenextlayer Жыл бұрын

NICE! I'm so glad

@eyriewow4297 Жыл бұрын

Smart plugs are a wonderful addition to 3D printing. I use them with the Octoprint PSU Control as well as PSU Control - Home Assistant plugins. Those make it super easy to have the printers turn off automatically after a print is done, and the printer has been idle for 30 minutes. If you use Cura, you can even use the Octoprint plugin in Cura to have the printer turn on automatically when you send g-code.

@briankeyser9869 Жыл бұрын

I’m not sure how large your intake hole is, but for a passive intake, you will want the size to be significantly larger than the fan/exhaust side. Otherwise a fan on the intake side will help balance. A slightly negative pressure inside the cabinet is ideal to prevent any nasties from getting pushed out too.

@DoRC Жыл бұрын

To create a negative pressure on the inside wouldn't you want the intake to be smaller than the exhaust?

@briankeyser9869 Жыл бұрын

@@DoRC If there's only a fan on the exhaust side, there's always going to be some degree of negative pressure in the chamber. As the intake size increases, the pressure differential becomes smaller, and air flow rate increases until the fan's maximum flow rate is achieved.

@Henry-by8en Жыл бұрын

For printing ASA and ABS, ideally you'd want 50-60C enclosure temperature I believe. This is why the Voron electronics are outside of the enclosure and not inside it. But I can see that to move the electronics outside for the cr10 and prusa might get kind of tricky. I am also not certain how fire proof that enclosure is. You do have oxygen flowing in through the holes you've drilled for the air inlet. With fire extinguishers, you can get automatic fire extinguishers but they trigger at like 60C so they're a little too sensitive. You could mount them outside the enclosure though if the enclosure ever got engulfed in flames.

@thenextlayer Жыл бұрын

Ah, wow, didn't know the temp should be that high. Thanks for the tips

@netpackrat Жыл бұрын

The enclosure I have my Prusa in maxes out at about 35C-36C, and my Voron parts have been turning out just fine. I broke one of my test cubes with a couple of adjustable wrenches, and it didn't break clean at a layer line, but left a more jagged break, so adhesion doesn't seem to be an issue.

@Henry-by8en Жыл бұрын

@@netpackrat the reason for the higher temperature isn't to do with adhesion. It's to do with warping and internal stresses. The Voron parts are pretty small so that's less likely to be an issue. As you try to print larger parts, higher temperatures reduce warping and reduce the internal stresses

@jefferygrantham5582 Жыл бұрын

Great video, sir! Very informative. I do have to mention a plugin for octoprint that I've used in the past before moving that allows you to use a tasmota flashed smart outlet to automatically turn on the printer when a new print is being started and turn off the printer after a set amount of time of being idle. I don't remember the name off the top of my head, but it's pretty easy to find in the octoprint plugins.

@thenextlayer Жыл бұрын

Ooooh smart, on it

@H0mework Жыл бұрын

You should look at the prefilters for the hepa filters. You can probably make a bigger hole with a fan if you add a piece of cardboard that can flip when it opens

@PCBWay Жыл бұрын

Nice content!👍 BTW, a big Merry XMAS to you and your family from PCBWay 🎄🎄🎄🎄

@thenextlayer Жыл бұрын

Thanks!!!

@ThirdDynamic Жыл бұрын

Thank you for this! We've been wondering about your enclosure. To me, this is one of the better one's I've seen. I'm going a cheaper route for mine but am going to take a few ideas from yours, like keeping the temp close to 35 all around. I don't use any materials that require massive amounts of heat and will certainly be adding a few holes for air-flow. Thanks for your videos!

@thenextlayer Жыл бұрын

Glad it was helpful

@beerbrigade3096 Жыл бұрын

I just got a Snapmaker J1 and I'm looking at getting a resin printer. Saw your cabinets in an earlier video and knew I wanted to see how you made them cause they're perfect for my space. Keep up the great videos!

@thenextlayer Жыл бұрын

Nice. Glad it’s helpful. Much more coming soon.

@robertzarfas9556 Жыл бұрын

Using smart plugs to get data on power consumption is a great idea. I use smart plugs to control my bearded dragons’ enclosures and I love having everything on timers and the ability to control it even if I’m not home.

@aqhan Жыл бұрын

I've been waiting for that video and you certainly did not dissapoint! Thank you!

@thenextlayer Жыл бұрын

Thanks, I'm really glad you enjoyed it!

@Phattie763 Жыл бұрын

@The Next Layer You could use a helium tank and small pump to activate on fire detection using a decent smoke alarm as the sensor, we used a beefed up version for a data server rack.

@dericklong6191 8 ай бұрын

I'm not good at flow dynamics but I'm going to ad a vent pipe with a 4 inch duct fan coming out of mine with a window outlet for printing ABS. On the inlet I'm going to put a carbon filter to stop any dust or anything from going into it.

@AsaMakes Жыл бұрын

I love the shout out! Your channel convinced me to start filming content :)

@thenextlayer Жыл бұрын

You should!

@conorstewart2214 Жыл бұрын

This video was very interesting as I am about to build my own enclosure. Mine needs to have different specs to yours since I will use mine to print polycarbonate, nylon and polypropylene. So it needs to be capable of higher temperatures and as such the main board, pi and psu will be mounted outside the enclosure. The enclosure will pretty much become part of my printer which is an ender 3 pro since I will just pull off the main board case and mount it under the enclosure and just drill a hole for the wires so I don’t need to deal with extending them all. I will probably also power the pi from the printer and add a relay to control the printers power from the pi. A few good ideas I saw from your video is the lighting, I was just going to add a few led strips but may rethink that now. Another good idea was the tool holders, it would be good to mount all the tools on one side (outside) of the enclosure. You gave me an idea for setting up my camera as well, I will just use a flexible mount and have it outside the enclosure but move it into position when I need it. I might need to rethink my cooling though as I planned to use a 120mm fan vented out of the enclosure through a hepa and carbon filter, that might not be enough cooling. But I can always open the door if I need to since the parts that would need to cooling are mainly just PLA. My plans for the cooling controller are just a microcontroller and temperature sensor, the fan will be constantly on slowly but will speed up as it needs to cool the enclosure. You have definitely given me some ideas and things to think about so thank you.

@lidbergtech Жыл бұрын

Great video! I really enjoyed it! Got some great tips for a future project!

@thenextlayer Жыл бұрын

Thanks

@conorstewart2214 Жыл бұрын

For your external venting of the enclosure you use a 60 mm fan. Smaller fans tend to be louder and less powerful so you may be better upgrading to a 120 mm noctua fan.

@netpackrat Жыл бұрын

I printed out one of those ball bearing spool holders for my Bear upgraded Prusa, and I found that it spun too easily. The filament would over-run and get tangled around the holder. I machined a couple of plain bushings out of delrin to replace the bearings, which made a significant improvement, although I think a little more friction would still be beneficial with some spools.

@thenextlayer Жыл бұрын

Oh interesting!

@mikestewart4752 Жыл бұрын

Not sure if you use Octoprint, but there is a plugin that can be configured to automatically turn off your smart plugs after your print completes and your hot end cools to a specific temperature. This allows the fan on your hot end to run for a while to prevent heat creep. 👍

@thenextlayer Жыл бұрын

OOOH, cool, Definitely gonna check that out, thanks :)

@samtheengineer 11 ай бұрын

yah, it's called PSU control. I use it on my ender 3

@CAVEMANsean Жыл бұрын

Recommendations for enclosures that don't trap any heat? Don't want to do anything beyond pla for the foreseeable future. But I also have a toddler. Currently I move the printer when I'm not using it or my toddler isn't asleep

@delltheengineer6935 Жыл бұрын

I got a ender 3 for Christmas . Thanks for all your helpful tips !

@thenextlayer Жыл бұрын

Congrats! Awesome, make sure you're subbed, lots of other stuff coming soon :) And check out my older videos.

@delltheengineer6935 Жыл бұрын

@@thenextlayerno worries I watched almost all of them 🙂

@rbid Жыл бұрын

Neat. How about fire prevention?.. Thanks for the tips, especially with the light advises.. Greetings from the Galilee.

@tomjohns8498 Жыл бұрын

It's great to see 👀 you are ALMOST finished building your cabinet it can be your new-year resolution 😀 👍🙏😋

@thenextlayer Жыл бұрын

LOL as soon as I finished the video I realized my Voron won't fit... soo..

@hyderkashani3169 Жыл бұрын

Your should make a video about filtration more detailed information 👌

@madbuldog Жыл бұрын

I'ts nice and refreshing to see someone digging deep into the closet not just coming out of one. :)

@thenextlayer Жыл бұрын

LOL! Thanks for a good laugh :)

@nickrudd2568 7 ай бұрын

Has anyone tried Carbon underfloor heating wire to heat your boxes? That stuffs so cheap compared to heat mats.

@michbushi Жыл бұрын

to save on external air filtering and keep the noise to a minimum, you could instead install a closed-loop external air radiator (similar to a water cooling loop in a PC that transfers the heat from the inside of the case to the external radiator - only, instead of water, you would simply circulate the inside air through an external heat exchanger). Depending on the size of the external radiator and the amount of heat needing to be dumped, you could perhaps get away with no outside fans, and if they prove necessary - they would be much bigger and thus slow-spinning/quiet. Obviously, the diameter of the pipe/radiator would need to be appropriately bigger, for the air-to-air heat exchange to be effective. Something to research/experiment.

@brianniegocki2086 Жыл бұрын

Would you mind providing more info on the filtration components? (fan, switch, filter) The aliexpress links are broken for me. Particularly which filter or at least the dimensions? From the STL I'm getting 62mm x 110mm, but not finding much of that size on amazon

@brianniegocki2086 Жыл бұрын

Ahhh, nm. Found it all on the original thingiverse for the housing

@therick0996 Жыл бұрын

Super excited for the Voron series next week!

@thenextlayer Жыл бұрын

Yeeeaasahhhh

@megamanjay1 Жыл бұрын

Yes!!!!

@mez9300 Жыл бұрын

Man WHY didn't i think about smart plugs, damn thats a good idea thank you

@nicholasclark4329 Жыл бұрын

Great video! Just make sure with the printers you shut down the raspberry pi before disconnecting the power. It’s more important on the v2.4 since klipper stores everything on the pi and a corrupt sd card is a nightmare. There are other ways to turn off power to a klipper machine, like the home assistant plug in, installing an SSR between PSU and mainboard so you can use the pi’s gpio and moonraker to turn the rest of the machine off and on while keeping the pi on. Other than that it’s a great video.

@thenextlayer Жыл бұрын

Oh, yikes. I didn't know that. I never do it lol. Thanks for letting me know

@nicholasclark4329 Жыл бұрын

@@thenextlayer Nice! now you know, that would SUCK if you woke up one day to a corrupted v2.4 rpi. There are definitely ways to do what you're trying to do. the easiest is to use an external power source for the pi and the smart socket for the printer.

@jimmyscott5144 Жыл бұрын

Bowden tubes (like showing respect) ? I always heard it as Bowden tubes (like bow and arrow)

@LeonMatthews Жыл бұрын

Turning on the fans at 30 degrees is a robust and elegant solution. Simple - but effective.

@runehovde8674 Жыл бұрын

Thanks for the great and in-depth video! Two small questions though; what are the inner dimensions of the closet/enclosure? I am talking to a carpenter to have something similar done with my printer. And how are you controlling the "when the temperature goes above 35c, turn on the fans"? is there an additional arduino/ESP device controlling it?

@thenextlayer Жыл бұрын

Check my video on accessories to keep on hand to level up prints. It’s a temperature switch. Mine is 58x65 inside. Too big now that I don’t really use my CR10

@runehovde8674 Жыл бұрын

@@thenextlayer Thank you for your answer! I have seen that video in the past, but did not catch that it automagically turns on the fan at set temps, perfect :) Hope to have an enclosure almost as nice as yours soon

@creepyloner1979 Жыл бұрын

two words: stereo cabinet. glass front, adjustable shelves, thin particle board back that's easy to cut or drill for cables or ventilation and the top makes a nice work surface.

@thenextlayer Жыл бұрын

Genius

@seanb250 Жыл бұрын

Tips for temp control, first is don’t run those lights unless you have to, they produce more heat than you think. Second is that those style of fans are not designed for pulling/pushing air through a restriction like a filter, they are made for unrestricted air movement, a vane style is more suited. Lastly, plumb a duct to the lower chamber to pull air directly from that chamber itself, as well as a duct for the top chamber.

@seanb250 Жыл бұрын

Centrifugal fan design is what I meant, my apologies.

@thenextlayer Жыл бұрын

Nice, these are good tips, thank you

@eslmatt811 Жыл бұрын

I would add a second fan to the exhaust, the biggest restriction is your filter and add a bit of dust filter at the inlet to stop dust from entering the enclosure. Great setup

@thenextlayer Жыл бұрын

Thanks, this is a good tip - but how... in-line?

@eslmatt811 Жыл бұрын

I would first try stacking a second fan on top and see what happens. Or a second vent system, possibly with a higher temperature switch. A smoke detector might also be a good idea. A server fan, while noisy, would do this well. An Arduino with a temperature sensor, the hotter the temperature, the faster it spins would be the best solution. This is what I am planning for my enclosure, but I have server fans lying around and my printer is in the basement away from people.

@DoRC Жыл бұрын

Now that I own a BL printer every time I see an ender 3 or similar printing in the background of a video it always looks like it's in slow motion. It's hard to believe I printed that slowly for such a long time.

@Piction3D Жыл бұрын

Can you connect Obico to Beagle cam? I just got one.

@thenextlayer Жыл бұрын

nah, you need a full Octoprint setup to run Obico I'm afraid

@Piction3D Жыл бұрын

@@thenextlayer I hope ..... one day ... in the NeaR future Obico... will be.... able for Beagle Camera

@247printing Жыл бұрын

Great video man, watched it all the way through! Loads of interesting topics for me, thanks! Check out the T-Series of Blazecut for fire extinguishing!

@thenextlayer Жыл бұрын

Thanks! Will do!

@loxire Жыл бұрын

Hey , it matters less what design you choose , what matters more is what type of noctua fans you have . That should decide what you do. Hether its a flow fan or pressure fan . Noctua has alot of details to each fan.

@thenextlayer Жыл бұрын

Thanks

@andyshap Жыл бұрын

Can you link to the KZfaqr who has the cabinet at friends apartment? That cabinet look like just what I need!

@thenextlayer Жыл бұрын

Search martinson manufacturing! Older videos

@nmavor Жыл бұрын

נו לא הגיע הזמן שתצא מהארון :)

@thenextlayer Жыл бұрын

חחחחח

@reecew157 Жыл бұрын

What filment dryer do you use?

@thenextlayer Жыл бұрын

I have the Sunlu one, but I had to heavily modify it to make it decent. Now, I have an EIBOS one, and it's REALLY good. Check out My Tech Fun's review, they showed how it destroyed all others.

@reecew157 Жыл бұрын

@@thenextlayer Thank you for you help, Do you have the Sunlu S1 or S2 dryer

@TheJacklwilliams 11 ай бұрын

Good stuff. I like everything about it except for one thing. I put this to you, and the rest of the crew chimin in. Enclosing everything including the electronics? I’m an IT guy and aside from PC’s, we put servers and such things into climate controlled, cooled rooms. I haven’t built an enclosure yet, plan on it, but have also looked at many solutions that move the motherboard, power supply, screen, etc… outside of the enclosure. I guess my question in the end is, wouldn’t enclosing it all shorten the life of said electronics? Thanks for any response. Again I really like the work here and there are so many great features you incorporated. Thanks!

@thenextlayer 11 ай бұрын

Yep this was far from ideal. Fortunately I've since moved on to enclosed printers :)

@TheJacklwilliams 11 ай бұрын

@@thenextlayer Thank you. Nice response. I haven’t looked at Bambu that close up but, Voron, etc… puts the important bits outside the enclosure and I’m guessing of course that the folks over at Bambu did the same.

@dericklong6191 8 ай бұрын

Is it true ABS is really toxic or does it just give you a headache?

@thenextlayer 8 ай бұрын

Both!

@jonatanboy Жыл бұрын

This man is out here saying that paying more than a new P1P for 5 walls and a door “isn’t that expensive” I’m currently making an enclosure out of plywood as well. The single sheet i needed goes for 20-40$ and i had it on hand. I happen to have a sheet of plexiglass i pulled out of a forklift going to the salvage yard at work. So if you consider the fact that i was making money while finding this plexiglass, and apart from air filters, hinges and seals i have everything else including tools on hand or available to be scrapped from something else. i still haven’t spent anything, and i already have a draft-safe box with a see-through door (well lid for now i guess)

@thenextlayer Жыл бұрын

Plywood? Are you also the kind of person who would repair their BMW or Tesla with duct tape…?

@jonatanboy Жыл бұрын

@@thenextlayerIn the first minute of the video you say that your enclosure is made from plywood. Repaired any Teslas today my namebrother? 😂

@GUULdotGG Жыл бұрын

Heads up, your discord invite link seems to have expired or somehow become invalid

@thenextlayer Жыл бұрын

Oh snap. Thanks. We will check it!

@tzoody Жыл бұрын

כמה אתה מוכר את הארון?

@thenextlayer Жыл бұрын

1000?

@maxrichhart4929 Жыл бұрын

You mentioned someone who did a tour of a print farm they housed in friends apartments. Who was it? I’d like to check that out!

@thenextlayer Жыл бұрын

martinson manufacturing

@GeertGoossens Жыл бұрын

I might have missed something... but octoprint with a touchscreen lcd ... requires more information! :o

@thenextlayer Жыл бұрын

Octodash!

@dccameron Жыл бұрын

Did you ever say what smart plugs you are using?

@thenextlayer Жыл бұрын

AliExpress ones. Aubess. We will out links in description.

@Sofiakivaev 6 ай бұрын

Did you make a blueprint for the carpenter or did he build everything based on the information you gave him? I'm from Israel too🎉🎉🎉❤ I would appreciate a recommendation on the carpenter who did it for you😊

@Guy_Sandler Жыл бұрын

dang I was just in Israel

@WhatsanEngler Жыл бұрын

Sold that custom cabinet yet?

@strictnonconformist7369 Жыл бұрын

“It will spin as smooth as a baby’s bottom”😂😂😂 How many babies do you see with spinning bottoms?

@thenextlayer Жыл бұрын

Just had a newborn and his butt is soooooo smooth

@strictnonconformist7369 Жыл бұрын

@@thenextlayer but, was the butt spinning?

@Azurko Жыл бұрын

$700 for an enclosure sounds crazy, but thanks to being a woodworker as well I know lumber prices and that's not bad for custom work. I might get away with building it for myself for around 200 to 300 if I swap out the glass for plexi.

@thenextlayer Жыл бұрын

Nice, thanks for validating :)

@TheJttv Жыл бұрын

1. While not super fire safe, putting your printer on a NBR foam yoga mat or kneeling pad will likely work just as well for noise and vibration. 2. BLAZECUT for the fire extingiusher tho you might want something to stop from blowing sparks out the bottom hole. 3. Painting the interior a lighter color will make the lights work better

@bigblackclock5661 Жыл бұрын

Closed too hot for pla. So doors open on pla. Abs/asa at 35 degree may fine for small thingiverse shit. Print a 10x10x10 thin walls abs part and your parts are toast. That leaves only petg to print with closed doors. 🤷‍♂️

@thenextlayer Жыл бұрын

Yep, I just printed the removable door hinges, no time to put them on today though

@almogperetz327 Жыл бұрын

אתה ישראלי?!?!

@thenextlayer Жыл бұрын

בטח

@almogperetz327 Жыл бұрын

@@thenextlayerמדהים אתה עושה תוכן נהדר כיף לדעת שיש יוצרי תוכן כאלה מישראל אני גם חובב הדפסות תלת מימד, אנדר 3 בחדר שעובדת ללא הפסקה

@andrewdok3595 11 ай бұрын

Bla-bla-bla Give me 700-800$ for kitchen box, without glass door. Other constructions are piece of wood and glue, but my is perfect. - That what I hear. Is there internal preheater? -NO Or may be 4-5 spool storage with heating and Dehydrating? - NO Is there some electronics that make it autonomous? NO only online controll, or monitoring. Most of parts are opensource on thinigverse, or cheap as Sonoff instruments, Or can be done in Any local furniture production. So where from you got such price? I agree it looks Nice, more compact and organized but not even close to Good or Semi-Professional. It would be great choice for home makers, witch would be ready to correct it for their own workspace and printers. So if I would be ready to pay 800$ and be ready to correct it - when I can draw looks close box and get it ideal for me for less money? In both situations I will need to assemble it for myself. So your help is in: Make project; mill it for me; send it to me. But stop. Project you made not for me? you made it for yourself, and to make content on your channel - it cant cost much, it is not exclusive or personally modified. Send it and mill it - You know I afraid in my city it cost less then in your, And shipment will cost more than product. So I see it could be interesting Only to by Blueprints, to watch "how to" assemble it on your chanell and stay in contact how I modify it - giving to you additional content. Of course some people can be ready to by KIT. But I am sure they wouldn't be ready to loose their time in corrections and wrong assembling - to be alpha testers, for their own money. For me your monetizing idea is a bit crazy.

@thenextlayer 11 ай бұрын

Sorry I don't understand 80% of what you wrote but you're right my enclosure isn't the perfect one, it's just the perfect one for me in my home office.