Not gonna lie, I love the building part more than the driving part. Call me crazy.
@rcdriver3 жыл бұрын
Same! Except if the kit has a lot of decals. 😂
@josephfogus67352 жыл бұрын
Lol I just finished a king yellow build talk about decals lol so many. I know you know ;) keep up videos!
@badasscop4459 Жыл бұрын
Me2😂
@scalebuildersguild3 жыл бұрын
It's almost like you knew what color I was going to dye my cage. ;) Nice build-up Greg!
@rcdriver3 жыл бұрын
I just had this feeling 😆
@jesseormond32023 жыл бұрын
One of you 2 could put the Yeti up against the Ryft, that would be a fun fight to watch
@gustavojaxton78773 жыл бұрын
pro tip: watch series at Flixzone. I've been using it for watching lots of of movies recently.
@bradykyree10763 жыл бұрын
@Gustavo Jaxton Yea, I've been watching on flixzone for months myself :D
@watsonelijah96933 жыл бұрын
@Gustavo Jaxton Yup, I have been watching on flixzone for years myself :)
@readeracingRC2 жыл бұрын
Dude i just ordered one for me. my first build was back in 1986 when i built the RC-10. im looking forward to my build. i watch your RTR and makes me looking even more to the rig. so excited. but ill be taking my time, and no hurry. well... thats what i say now. thanks for the vids. ill get back to ya when i have it ready to rill. thanks again.
@Firewlkre3 жыл бұрын
Finally! Something new I can really get excited about,looks like Axials most complete kit since the bomber.Thanks for sharing can't wait to see it completed and running!
@Triggered-RC3 жыл бұрын
Good to see new kits coming out. I’d buy a kit over rollers and RTR’s any day... which is why only 4 out of my 35 cars aren’t kits.
@Art-zs6sl3 жыл бұрын
I want it. To me that grey looks SO much better than orange/black. Plus you can dye it! Happy to see the 2 speed included as well. Hopefully people will give this thing another look. It had a tough launch.
@paulclancy24043 жыл бұрын
Die it black? 😆
@CustomKidzCars Жыл бұрын
Great video, just got our kit to build up.
@Pirate-530 Жыл бұрын
Good job skipping aligning the links and the front end Really liked that
@BarryStenshorn Жыл бұрын
I had alot of fun building mine , I and a smaller esc and motor in didn't like so put a Mamaba X and 1406 motor and this flys also put bead locks on stock tires only running 2s now going to try 3s !!
@John-uh4rv3 жыл бұрын
Bought the orange rtr ryft after waiting for the kit. I really like mine. Too many people think this thing is a basher. It’s great at its intended purpose.
@rcdriver3 жыл бұрын
I agree. Part of the fun is finding the right location to use it, picking the right line and attacking the hill like a real bouncer.
@jjshobbypower90913 жыл бұрын
Look like a very nice kit comparing to the RTR version. At least it comes with the 2 speed transmission, the trailing arms aluminium plates and the mostly needed sway bar. Really wish Axial has included these parts on the RTR version as the RYFT RTR is not cheap. I wonder when the official Axial RYFT sway bar will be available in my country, really looking forward to it as running 4s is really unstable at the moment and I am speaking on behalf of all of the RYFT owners.
@glennmiller16353 жыл бұрын
Nice build Greg. I have bought both coloured RTR RYFT’S.I couldn’t decide which colour I liked best, so l bought the orange and the black one. I’m glad they finally released the kit build version. I’ll be looking forward to getting that and doing a build version of the RYFT that’s different from the RTR version. I watch your KZfaq channel all the time. I like your Rc reviews you do as well as your build videos. Keep up the the great work. Glenn Miller from Peterborough, Ontario.Canada 🇨🇦👍👍😎
@glennmiller16353 жыл бұрын
Can’t wait to see part 2 of RYFT build!!!
@Dokroc783 жыл бұрын
Good job Axial! Exactly what us builders want. Nice Video!
@bigheadrc3 жыл бұрын
Been dreaming about this !!! Awesome Video Brother 👊👊👊👊👊
@rcdriver3 жыл бұрын
Thanks! Yep, certainly liking the extras in the kit version.
@rcjoe4063 жыл бұрын
Was at hobbytown today they had 2 I put it on layaway can't wait to build it
@INSIDIOUS-ONE3 жыл бұрын
So awesome!! I knew it was better to wait for this! I’m glad I didn’t run out & buy the rtr ryft . Almost did lol. Heading to my LHS to order it now!!!🤩🤩👍🏼🍻
@rcdriver3 жыл бұрын
Awesome! Very cool supporting your LHS. Enjoy the build!
@rcpete70553 жыл бұрын
Really like your PL Cap 🧢 👍 They kept this kit quiet 🤫 eh.. Really happy about the sway bar.. Are they going to start putting that on the RTR? That's what's stopping me from ordering a Ryft 🤔😄
@rcdriver3 жыл бұрын
I wear my PL hat everywhere! 🤩 Not sure if Axial will include the swaybar with the RTR. It is an easy option to install though.
@dchapman04493 жыл бұрын
Love the intro!! I like your blue, silver, and white.
@samimontas87743 жыл бұрын
Man it looks huge next to you 👍
@bucksrcworld81192 жыл бұрын
awesome upgrades from rtr, great unboxing and build!
@Bziiit.3 жыл бұрын
This really got me hyped. This is an awesome package
@GreatLakesRC3 жыл бұрын
Always nice to build a kit! 🤩
@RC4X43 жыл бұрын
This is awesome, just what I wanted to see. I'm excited to get one. I like the cage on this one.
@jjshobbypower90913 жыл бұрын
Oh, I have also noticed they have not included the pivot balls for the 2nd slot at the bottom of the front suspensions. And for the colour scheme, I think it will look very cool and different if you dye the cage to Ironman metallic red and the body panels to matt gold, just a suggestion.
@rcdriver3 жыл бұрын
Yes! I noticed that during the build but forgot to mention it. Oddly enough the screws were included for the pivot balls.
@markvasseur9613 жыл бұрын
Awesome, need me some build kits to put together and this looks like it's right up may alley!! 👍👍
@Big-Lex1243 жыл бұрын
Its going to be a lot of ... Fun. You got me there.
@jonathanbeaumont21833 жыл бұрын
I lov ed my wraith kit way back. This looks sweet wish the wife would let me get one..
@lsswaptheworld90923 жыл бұрын
Why not try that new castle copper head esc with a holms puller pro. That's what I think I'm gonna go for. Great vid man so excited about this one!😀😀😀
@just_inolredneck83193 жыл бұрын
I think I’m gonna take out the interior... they look a lot cleaner.. just my opinion but great build! I’d keep it the black and grey...
@CoachD3863 жыл бұрын
I was waiting on them to do the kit version 👍🏾🔥
@thejeepinrealtor57422 жыл бұрын
Was a running video ever made on this? I looked through and didn’t see it. Looks like a great kit.
@crazygrc5283 жыл бұрын
Were the axles per broken ??
@Nickwillfixit3 жыл бұрын
Nice a kit, but all the development with the hobby still the only company that had a stab at no horrible steering servo either on the chassis, sort of acceptable but servo on the axle I really dislike and Capo's cable steering was out there but works, takes a bit to set up and needs regular maintenance but come on out there do something NOW, it would be such a HOT sales point and would get me putting my hand in my pocket more often.
@johnmoulton27423 жыл бұрын
Would look great black chassis with outlined drivers , leave clear panels with multi color leds. Color changing while driving.
@rob27383 жыл бұрын
I was disappointed with the Ryft. Sold it and bought the Corally radix 4. It’s £150 cheaper, miles better made and loads more fun to drive. 👍👍👍
@adventuresofshitman21993 жыл бұрын
Too bad it’s ugly
@timvanasen67113 жыл бұрын
Awesome a builders kit I've been waiting I ran my buddy's rtr it needs sensored brushless for my preference, do your RC DRIVER logo with a hill in the background on the body panels, you mentioned dipping the cage in dye do you have a how to video? great product release thank's for always being precise 😉👍
@chrispalusak77253 жыл бұрын
A hobbywing 2600kv 550 motor and esc combo has huge power.
@rc-daily3 жыл бұрын
I'm pissed that they have released this kit with diffs and spools but they're not available anywhere to purchase anywhere for guys that bought the rtr months ago. We are stuck with epoxy for diffs. Hopefully the new ones are a heck of a lot better than the ones that come on the rtrs.
@LawrenceTimme3 жыл бұрын
2 speed baby!
@johnsandoval755 Жыл бұрын
i just bought the kit, would you please tell me what type and brand of grease you used?
@westindeen623Ай бұрын
Do you think a first timer would be able to build this
@ateuprc6593 жыл бұрын
Nice build!!!
@yvonthibault60412 жыл бұрын
This thing looks awesome. I love it a lot!! Thanks for the well done Video. Question 1 : Can we slow this down to make it, as you shift it on 2nd, gear, it could become a crawler ? Question 2 : Can we modify it to install a 4 wheel steering setup ? Thanks for your reply.
@davidc812 жыл бұрын
you can crawl if you run a low kv motor and vitavon makes a mirrored rear axle for 4ws.
@johngantner93143 жыл бұрын
the first one! Thankyou
@ricardomaldonado601 Жыл бұрын
What electronics would you recommend to get for this kit?
@johnroddy9313 жыл бұрын
Got Mine
@hillbillygaragecs29212 жыл бұрын
Can you run 2 speed transmission and just manually shift it from hi to low.
@braaitongs2 жыл бұрын
Why doesnt it come with a motor and servos and stuff ? So you can build it then just put in a battery and ready to go
@ggwbrc3 жыл бұрын
My ideal RC, but unfortunately I can't have it yet, I can only watch and watch on KZfaq 😞
@charlesedinger30633 жыл бұрын
Hey I'm building my daughter one right now what electronics did you end up going with I was throwing a spektrum system in out of an old truck and don't think it's going to be right for this truck what do you think of the copperhead 10 with the 2400kv motor setup??
@BROtheBRAWLER3 жыл бұрын
Axial rocks properly ;)
@joesvenskason64713 жыл бұрын
Blue
@masontaufen133 жыл бұрын
Does it matter what servo you put on the two speed transmission could it be the same servo as the steering servo
@rcjoe4063 жыл бұрын
Hey Greg would a max10 combo on 3s power this truck?? ...just bought the kit i don't have another 200 for power
@jeromysmith56323 жыл бұрын
Great video, This thing looks awesome. The only this the bothers me is the servo on the axel. Just the look of it. When i get it, im going to figure out how to hide it more.
@rcdriver3 жыл бұрын
What are you thinking? Some sort of cover-plate? Or a BTA setup? 🤔
@jeromysmith56323 жыл бұрын
@@rcdriver i was thinking of adding on to the front of the roll cage, and putting a wench in it, kind of like this kzfaq.info/get/bejne/apyWe6hmxMnbeas.html Wench wouldn't be operational, just for looks
@carterhart54353 жыл бұрын
Would speculate the rear trailing arms are probably compatible with the RR10 Bomber arms, if so there are tons of upgrade options. The need for the sway bar reminds me of the RR10, almost useless without it. Got rid of my RR10 and built a Capra, much better truck.
@rcdriver3 жыл бұрын
The trailing arms on this rig are longer than the Bomber. But aftermarket companies are working on options.
@RicosRixo3 жыл бұрын
I like this and wanna get it it will be my first 10 scale I have a 24 scale scx
@stuerc58533 жыл бұрын
must have one :D
@bsevinc40663 жыл бұрын
Awesomee, i love Kits:-)
@derricksazrc34113 жыл бұрын
Oh my gosh I want this. And I want to get one for someone else. It’s pre-order do you know when it will be out. And what your honest opinion on a motor/esc combo for it would be? I love your videos Brother and you have a great eye for the review details. Your Konghead video was what inspired me to get one.
@rcdriver3 жыл бұрын
I’m probably going Tekin with the Motor/ ESC combo. Holmes Hobbies is an extremely close second.
@colorado_a37663 жыл бұрын
Dumb question, but since this is now offered in a kit. Would this be worth turn into a crawler “hybrid” so to speak. I’m just now venturing into the crawler/trail rider scene and love the look of this ryft!
@rcdriver3 жыл бұрын
The thought had crossed my mind about tweaking it to crawl because there seems to be a lot of interest about its crawling ability. It’s kind of wide and long for stability and it’s weight bias doesn’t seem to be suited for crawling. But much of it can be overcome with some custom work. If you really want it as a crawler, I say go for it. It might not be the most capable, but I’m sure it will be fun.
@colorado_a37663 жыл бұрын
RCDriver_Online thanks for the feed back man! I may just throw a nice sensored castle system in it and have some fun with the 2 speed function! 🍻🍻
@RicosRixo3 жыл бұрын
What grease does he use on when he put it on the circle part in the first part
@purelyrod93103 жыл бұрын
Nice kit and vid. Waiting for someone to come out with a 1/18 or 1/16 scale of this type of vehicle. Or if anyone can recommend an existing platform to build up from. I hike or mtb to my RC spots and need something to fit into my backpack.
@ilhamnigiawan91273 жыл бұрын
can this rig for stone smooth crawler? sorry bad english heheheh
@hansmlauridsen3 жыл бұрын
Hi. Really great quality video. Im gonna use: Arrma BLX185esc and Arrma 2050motor. Teamcorally OC27 Servo. Spectrum DX3 remote and Spectrum SR6100AT reciver. Dont know about the small servo for the transmission. Any suggestions? Best Regards from Denmark
@rcdriver3 жыл бұрын
The manual calls for the Spektrum SX107 which comes with the spline adapter. Or Reefs RC has a good micro servo that I believe can be adapted.
@hansmlauridsen3 жыл бұрын
@@rcdriver Hi. Thanks! The good news is that the Spectrum mini servo is in stock at my local shop. The bad news is there's no know date for delevery of the truck. As all my 3 kids are driving RC I think this build will be great to learn them how an RC is build up and hopefully will teach/learn them a little more about the mechanics behind it all. And it will be great to build it together as a family project. Looing forward.
@17Shaky3 жыл бұрын
I haven't seen a Yellow one yet.
@dannyvigo87613 жыл бұрын
Do you have to dye it? am wondering if you can paint it instead it would be better
@rcdriver3 жыл бұрын
Dye impregnates into the plastic whereas paint only adheres to the surface. When you roll it, a painted cage could scratch or chip and you’ll see the grey underneath. If you scratch a cage has been dyed, you wont see the original color peeking through.
@RicosRixo3 жыл бұрын
Hope he shows him using the car on a track of sum
@terifarrar73173 жыл бұрын
D 2 ?
@rockinrc41463 жыл бұрын
What does the spool do?
@v8felon Жыл бұрын
Gun metal gray
@andrewamsley92243 жыл бұрын
How about axial green as a color
@shellylove97673 жыл бұрын
You should paint it a dark blue
@deebrown8327 Жыл бұрын
Were can i get me 1 for a nice price???
@robcombs48693 жыл бұрын
Green cage bright metallic blue body
@chevyman85783 жыл бұрын
RED BLACK SILVER
@JeepsCafe3 жыл бұрын
Hurry up and get"er done i want to see it run 🤣🤣
@rcdriver3 жыл бұрын
LOL! I’m working on it. 😂
@mahesapemuda67503 жыл бұрын
😲👍
@LawrenceTimme3 жыл бұрын
People always jump on stuff like this too early. They should wait.
@mikebauer92023 жыл бұрын
D Bag. It's all about E Bag.
@jasonbell46703 жыл бұрын
My Ryft has been an absolute piece of junk since day one, $500 for the RTR, now with the binding and diff issues I'm gonna have to sink at least another 300 in it
@RicosRixo3 жыл бұрын
Lemme see it crawling
@rubiken063 жыл бұрын
2nd been waiting for this
@Ayrton_Groesbeck3 жыл бұрын
Holmes hobbies puller pro xl
@themountain593 жыл бұрын
Same fu...ing nightmare....only cheaper . LOL
@marresjepie18873 жыл бұрын
No servo splines for different brands? That’s idiotic.. and a bit nasty to boot.. brand-locking those that aren’t aware of more options than the spektrum crapola..
@rcdriver3 жыл бұрын
It’s the same for the SCX10III and Capra, it’s not really a new thing, just thought I’d mention it. Modelers have come up with solutions to adapt other servo brands.
@marresjepie18873 жыл бұрын
@@rcdriver Ah. Time to check that out. (because, despite the insert-nasty, I reallly want the kit. )
@1peanut3 жыл бұрын
the Ryft is 1 problem after another. like the first gen wraith. the plastics soft and strip out easy. As an experienced RC enthusiast I do Not recommend this to anyone.
@rcdriver3 жыл бұрын
I stripped out one screw hole building this kit and it was my fault. I had the Makita driver clutch set on 10 for an M3x10 when it should have been set on 1.
@thegaragehub3 жыл бұрын
Obviously paint it blue lol
@rcdriver3 жыл бұрын
lol
@Leon-Servant-of-Christ3 жыл бұрын
Ahh, sh*t doesn't "break in" that much . If. Its too tight, it's too tight; fix it! Unless you like. Crispy burnt electronics
@rcdriver3 жыл бұрын
The internal diff gears are tight. Not the ring and pinion or driveline. The main driveline spins free.
@GrimJerr3 жыл бұрын
exactly the kind of untrustworthy FAN BOY Shite that made me Unsubscibe from your Channel. My GRYFT has sat idle for 2 weeks now because the Diffs have failed and there are no replacement parts and no locker spools. You cannot be trusted for an honest review.