Support The 8-Bit Guy on Patreon: / 8bitguy1 Visit my website: www.the8bitguy.com/ Find designs here: www.thingiverse.com/thing:469...
Пікірлер: 1 200
@TheCarDemotic3 жыл бұрын
I’m wondering what will people think when this randomly turns up in a yard sale or flea market in 70 years. Because it’s basically a whole custom computer with little to no documentation other than your videos.
@paco35233 жыл бұрын
Some youtuber named The 32 Bit Guy will open it up and analyze it in his retroretrocomputing channel
@cheaterman493 жыл бұрын
@@paco3523 More like the 64 bit guy :-) "remember 2020, they had arm64 and amd64, it was so confusing, only one letter difference between two radically distinct arches, fortunately ARM renamed to Nivarm in 2025, making things much less confusing!"
@vlco_o3 жыл бұрын
Although it is basically a Mini PET inside, a thing you can buy and is a bit more documentated. Still pretty funny to think about it
@proxy10353 жыл бұрын
well it is technically a standard PET, just in a custom case. plus the PCB says "Mini-PET" on it so if someone where to regonize the case as a Commodore based one and saw the BASIC screen, they could likely come to the conclusion that it's a Commodore PET
@RCAvhstape3 жыл бұрын
When building oddities like this it's always good to make a small label or index card with information on its construction and origins and place it inside the case.
@delphitechledlighting85553 жыл бұрын
This video is bringing back many memories for me back in the late 70s. My friend sold Commodore PET computers in Eastern Canada. On the original PET, the front plastic nameplate would snap out. I was just finishing high school and my friend gave me a contract to build an audio option for the PET to produce sounds from a bit port. I sourced Radio Shack audio amplifiers which had a volume control and 2 audio jacks. I routed out a slot for the ON/OFF volume control and two audio jacks. The nuts on the audio jacks held the small board to the back of the name plate and I made a cabling harness to go over to a inline pin array to pickup power and the bit port. I was doing many of these per month - can't remember what I made, maybe $10 or $20 a unit. More fun and better money than a paper route or working at McD's. My friend did amazingly well selling these computers as he sold a couple into the school boards and the government and then next year others in the government and the schools said me too and his sales soared. He won some trip with Commodore for top sales and got to fly on the Concorde. Those were the days.
@patemathic3 жыл бұрын
Using an old case would've likely cracked the plastic of it as well.
@mariosanchezolmedo68983 жыл бұрын
Makes sense
@DaveCurran3 жыл бұрын
You got the pronunciation of "Tynemouth" correct the first time. As I said when we originally discussed this, I would be happy to respin the Mini PET board to fit into a C64 case, but there doesn't seem to be much point in doing that until there is a suitable keyboard solution available that would not require the case to be modified. Also we now have the clear perspex case and chiclet style keyboards available from TFW8b, which does a similar job.
@damianvila3 жыл бұрын
Hey! Ts! You guys are great. I love all the things you do for retro computing. Cheers!
@richfiles3 жыл бұрын
Ever consider using one of the joystick ports as a socket for an external Numberpad key matrix. 9 pins could get you a 4x5 matrix, which covers the whole number pad. Any keys that don't fit in the standard C64 main layout area, could possibly be remapped to the function key area. While not as ideal to the PET layout, it _could_ work as far as just using an unmodded C64 case.
@ChrisKewl3 жыл бұрын
I'm working on the keyboard concept with Jim Brain. Maybe we can make this happen.
@hjalfi3 жыл бұрын
The main QWERTY area of the PET Business Keyboard has the same layout as the C64, AFAICT, and when using it you can get numbers on the top row and don't need the keypad: retrocomputing.stackexchange.com/questions/12466/what-were-commodores-keyboard-layouts-before-the-vic-20 As @richfiles π says, an external keypad could be connected. This wouldn't use the function key area but that could be used on the Mini PET for things like reset and NMI debugger keys, blinkenlights, etc.
@DaveCurran3 жыл бұрын
@@hjalfi At first glance they are similar, but when you look there are rather a lot of keys which are different. Some are missing, some in different places and importantly most of the punctuation is in different combinations of shifted / unshifted states. I've been through it all sorts of ways and it's too different. If you want to use a C64 case, we need a new keyboard with the right keys, and ideally based on the graphics not business layout for better support for some older software which does not use the kernal keyboard routines. (or maybe just build a different case or use the perspex one we sell that was designed for the Mini PET and the chiclet keyboard)
@caccsbill3 жыл бұрын
This soundtrack made me thinking in a crossover between The 8 Bit Guy and Beverly Hills Cop.
@EvilishDem0nic8732WhatItDo3 жыл бұрын
Midnight Run Vibes as well
@paco35233 жыл бұрын
But you mean an action movie with The 8 Bit Guy or a retrocomputing KZfaq video with Axel Foley?
@canwenot5733 жыл бұрын
@@paco3523 Yes
@RCAvhstape3 жыл бұрын
@@paco3523 I would pay good money to see a movie with Eddie Murphy and David as his sidekick.
@FindecanorNotGmail3 жыл бұрын
I suppose you are all referring to this track of the three: bedroomcassettemasters.bandcamp.com/track/sim-1 The other two: kzfaq.info/get/bejne/kNV9gLh0qKzDYmw.html kzfaq.info/get/bejne/fq91a8WFxK-7h6c.html Happy New Year!
@AndyAyres3 жыл бұрын
The end result looks great. Definitely think the black case with the white keycaps was the best choice.
@silmarian3 жыл бұрын
Agreed, it's like a computer tuxedo.
@joshuamartindale8683 жыл бұрын
Yes it does ☺
@digitalranger42593 жыл бұрын
Agree!
@Nobe_Oddy3 жыл бұрын
I REALLY like the bold contrast between the white keys and the black case - REALLY makes it POP!!! GREAT JOB!!!!!
@PET_-rp9rx3 жыл бұрын
Genuinely surprised how small that Mini PET is; it didn't show up well on previous videos but compared to a 64C case it's tiny!
@hexagonist233 жыл бұрын
You could fit a pet's processing power on a fingernail nowadays.
@DanTDMJace Жыл бұрын
@@hexagonist23probably a bit more; im sure theres an ARM processor capable of emulating the PET by itself thats slightly larger than a fingernail
@LMacNeill3 жыл бұрын
LOL. At first I misread the title of this video. I read "Building *the* case for the Mini Pet," which I took to mean that David was going to make an argument as to why the Mini Pet is a great computer and why we should all go out and buy one. Then he proceeded to build an actual *case* into which to mount the thing. Hahaha!
@gamesdonovan76663 жыл бұрын
same!
@mattc.88393 жыл бұрын
Same here. My first thought was "There are people arguing against the Mini Pet? Why?"
@kilianhekhuis3 жыл бұрын
Ditto here :D
@greglees40113 жыл бұрын
Me too! 😆
@cheaterman493 жыл бұрын
Fun mental typo :-)
@laurendoe1683 жыл бұрын
I can actually smell the burning plastic as he used the Dremel tool.
@KnuckleHunkybuck3 жыл бұрын
I'm so sorry to hear about your brother John being killed.
@bubgamingandvlogs3870 Жыл бұрын
@@KnuckleHunkybuck you mean kylie jenner she mad of plastic
@canwenot5733 жыл бұрын
This is a great example of engineering, ingenuity, and teamwork. I like how you decided to modify an existing (new) case rather than attempt to make an entirely custom deal, since the work involved is accessible to many people. Even those without a 3D printer could likely have a 3D print service make parts for them, and most people can afford/work with a dremel. Excellent work, guys!
@pinaz9933 жыл бұрын
"probably a pipe dream" "probably never gonna happen". You underestimate your pull in this community.
@ChrisKewl3 жыл бұрын
I know, I'm already on the ball on this! ;)
@RetroRecipes3 жыл бұрын
Nice work 8-Bit Guv'nor and Chris! Very satisfying. Puppyfractic also approves of the new "pet" home. 🐶 P.S. The last way you pronounced Tynemouth was correct - "tine-mth" 👍🕹️
@ChrisKewl3 жыл бұрын
Thanks sir, I appreciate your input! Hopefully the daughter board comes to fruition and we can have a drop-in solution.
@boswell2553 жыл бұрын
Tine-m'th is pretty rare, most locals I've met pronounce it how it's written: Tine-mouth. In fact I think even the older, broader Geordies would say "Tyne-mooth" if anything, though that would be overkill for anyone outside the area. I'd say David got it right first attempt.
@DavidLee-df8883 жыл бұрын
Oh, I kept thinking of seaside town Teignmouth in Devon. That's pronounced tin-mth like David's third try. I don't know why I wasn't thinking of the Geordie town.
@llamathenerd16723 жыл бұрын
I'm now realizing that in 6 months, my VIC-20 will turn 40 years old.
@dwaynezilla3 жыл бұрын
That keyboard holder is god damn slick. Kudos to the designer for making those available!!
@ChrisKewl3 жыл бұрын
Aww shucks, thanks!
@ddrfraser13 жыл бұрын
Who cares how much it costs, this is awesome and it looks badass!
@Okurka.3 жыл бұрын
You'd think he could afford it with $6k a month via Patreon.
@ddrfraser13 жыл бұрын
@@Okurka. He deserves every penny.
@Okurka.3 жыл бұрын
@@ddrfraser1 Not sure why he tries to hide it.
@Dirty_Habit3 жыл бұрын
Thing: doesn't fit 8bitguy: pass my dremel Thing: fits
@bobblum59733 жыл бұрын
Ah, the old Dremel tool commercial where they showed the dozens (hundreds?) of things it could do... until they showed a partially hammered-in nail, implying it couldn't hammer a nail. A fraction of a second later, the voice-over says "Did I mention we cut?" as it proceeds to cut the nail off.
@haweater15553 жыл бұрын
To be clear, those are new "Commodore 64C" cases ("sixty-four cee"), the "c"ompact (or "c"heaper ) later, flatter version of the C64 from the late 80's. Although the story accounts vary, the plastic injection molds (along with plus/4 molds) were fortuitous saved from the scrap melters by an astute enthusiast.
@ChrisKewl3 жыл бұрын
Yeah, I wish they saved the breadbins too though. :(
@jackandersen12623 жыл бұрын
Eventually you’ll have to make new molds as the old ones get used up to the point they are no longer serviceable.
@mrnmrn13 жыл бұрын
@@jackandersen1262 If they are still good at the moment, they will probably be good forever. They will never be used for making hundreds of thousands of cases again. I don't know what's the minimum number of cases which is worth making in one run, I guesstimate 5000. If they make 5000 cases every 2-3 years, or even just every 5 years, I would assume that would be plenty. And with rates like this, the molds wouldn't wear out in the next 30-50 years, I guess, if stored properly.
@jeromethiel43233 жыл бұрын
You are a light in a dark world. I wish i could go back to the late 70's early 80's, such a simpler time. So thank you!
@TheStuffMade3 жыл бұрын
Nice project and always good to see no original hardware was butchered during the experiments, although I have to admit I did butcher quite a few c64 back in the day when they were considered outdated trash.
@ThisGuyFrritz3 жыл бұрын
"The Theory of Everything" is another movie where you would see a Commodore PET.
@nickwallette62013 жыл бұрын
The Americans. Every office scene is either a Pet or an XT.
@fernandobernardo63243 жыл бұрын
You can see the Commodore PET on one of the most hated shows of all time. Star Wars Holiday special. Copies exist on KZfaq as Disney and Lucas pretend that never happened.
@camdennorris56963 жыл бұрын
5:22 apparently Chris was watching Ozzy Osborne play Cyberpunk 2077 on his iPad while he was making your 3D print lmao
@ChrisKewl3 жыл бұрын
I was actually watching Mass Effect 2 on a charity stream for 1UpOnCancer. ;)
@oktup3 жыл бұрын
Glad you mentioned the service menu for your TV. I have now fixed my off-centre TV too!
@cheeseparis13 жыл бұрын
Thanks for this video, brings back memories. Happy new 2021!
@MattKasdorf3 жыл бұрын
That turned out a lot better than I thought it would; the white & black contrast really makes the keyboard pop. 🇨🇦🐧 As for a PET case, I'd like something more like my chiclet 2001, but lighter and smaller; perhaps with a display that folds up and down.
@ChrisKewl3 жыл бұрын
I am working on some ideas. :)
@danielgrey6993 жыл бұрын
I just realized something while watching this. Whoever is doing your editing is really, really good. The cuts and audio are timed to absolute perfection.
@ChrisKewl3 жыл бұрын
David does all of his video work himself. We just send him video if we do segments like my 3D printing videos.
@organiccold3 жыл бұрын
Loved this project. Nice work from both. Happy New Year
@franklincerpico77023 жыл бұрын
Bro your videos are always amazing. The amount of work you put into these projects is amazing and they turn out looking so good.
@NanoBurger3 жыл бұрын
I found that a sanding drum on the Dremel removes material without melting like the cutting tool. I'd cut with the wheel and then move to a sanding drum to bring it into tolerance. That way, you can use the file just for squaring the corners since the drum is round.
@brantwedel3 жыл бұрын
It looks like the mini-PET is small enough you could move it further back in the case, and print a PCB adapter just to to extend all the IO/ports to C64 positions to not require cutting a case for the IO.
@ChrisKewl3 жыл бұрын
That was the original idea but there wasn't enough time to do it.
@douglasgjrp3 жыл бұрын
As always thank YOU for the great job. You are a truly inspiration.
@bobbobson40693 жыл бұрын
Another great show! Love the keyboard case and the background music. Happy New year from London, UK
@itsgeekhead3 жыл бұрын
This is so cool. Makes me want to go back to when I first started on computers in 1986
@KlausWulfenbach3 жыл бұрын
Brand new Commodore style case, brand new Commodore style guts, all assembled and soldered by hand. A perfect combination of homebrew and mass market aesthetics. From one Mad Tinkerer to another, I salute you, sir.
@WagnersTechTalk3 жыл бұрын
Very cool project, thank you for sharing! I remember our schools having PET's, around that time I got my first computer a TI-99/4A. Those were the good 'ole days! Happy New Year, love your channel!
@UltimateTechHub3 жыл бұрын
Very nice. The black looks great against the white keys and cool name too.
@MrEightThreeOne3 жыл бұрын
Good video as always, don't have a whole lot to say but it looks like the process went smoothly and it was fun to see it come together!
@Ian-Steele3 жыл бұрын
Tynemouth is pronounced to sound like Fine-mouth. It’s at the mouth of the River Tyne in north east England. You did well. 😃
@BobMonkeypimp3 жыл бұрын
Yes, he got it right on the first try. I don't live far from Newcastle so it was fun hearing his other attempts.
@LuisMercadoorg3 жыл бұрын
Happy new year to you, David, your family and all the viewers!
@baardbi3 жыл бұрын
Great video. I hope we'll be seeing a lot more quality content like this from you in 2021.
@JohnDlugosz3 жыл бұрын
Filling in the space between the main and numeric key areas: I thought the "biggest piece" you cut out would be saved for just that purpose.
@supraken1233 жыл бұрын
I am a simple man, the 8-Bit Guy uploads, I watch.
@philippepanayotov96323 жыл бұрын
All you are doing on your channel is awesome!
@bufordmaddogtannen3 жыл бұрын
That was a cool restoration, I loved it. 🙂 For the next time maybe I'd suggest you score the plastic with a ruler and an exacto knife. Then cutting away unwanted pieces would be a matter of bending the unwanted pieces with a pair of pliers. The plastic would just snap off cleanly saving you a lot of time and grief.
@herrpez3 жыл бұрын
In addition to being more portable and all that, I imagine the newer version is going to be more reliable in the long run than a real PET..
@FindecanorNotGmail3 жыл бұрын
A Dremel melts plastic more than it cuts b/c it is fast. I would instead recommend a *razor* *saw* from a model-making store. More manual work but more precise cuts. They come in many different sizes. One size _is_ just like a old-fashioned razor blade that has got serrated edges.
@michaeltempsch52823 жыл бұрын
Don't Dremels have speed control? (I've just got a noname knock-off, and it has...) Then it's down to type of tool/bit used - a grinding/cut-off wheel will tend to melt plastic, but they do make circular saw blades that cut plastic just fine, like: i.ebayimg.com/images/g/CCkAAOSwYNZavEbe/s-l400.jpg
@DJSvenNo13 жыл бұрын
Thank you for another great video, I'm hopeful that 2021 will be a great year for the retro computer scene
@pedrojuangutierez31173 жыл бұрын
Thanks from Warsaw. PL, Happy New Year!
@joshuarosen62423 жыл бұрын
Tynemouth, where my grandmother ran a hotel when I was a little boy, is pronounced in a perfectly straightforward way, so it is Tyne (the river and pronounced like the tine of a fork) and mouth, pronounced mouth. I know lots of English place names have spellings that bear almost no resemblance to their pronunciation but Tynemouth is not one of them.
@PissBoys3 жыл бұрын
1:14 “ Plus I’m sure there would be a lot of angry people if I did such a thing.” He’s learning, folks.
@josejeswin69363 жыл бұрын
Happy new year....looking forward to more great stuff..
@xiengyod3 жыл бұрын
Happy New Year 2021 from Thailand, 8-bit guy!
@radishdalek3 жыл бұрын
This is a great project. An alternative starting point case could be an amiga case - it would have space for the custom keyboard pcb's numpad
@markusjuenemann3 жыл бұрын
It won't. There are the cursor keys and the help and delete keys between Keyboard and Numpad... Maybe ac C128 Case might fit better, if I remember it correctly.
@radishdalek3 жыл бұрын
@@markusjuenemann Yes - the c128 would probably make a better case. It does have an extra row of keys at the top, but since they are separate from the main key groupings, they could be filled in.
@NuntiusLegis3 жыл бұрын
But other than C64-cases, Amiga- and C128-cases are not in prodoction any more, so original old cases would have to be destroyed - not cool.
@radishdalek3 жыл бұрын
@@NuntiusLegis I thought that new Amiga cases had been made available
@NuntiusLegis3 жыл бұрын
@@radishdalek In that case I give my blessings. :-)
@madkvideo3 жыл бұрын
I need me some construction blog part 3
@ChrisKewl3 жыл бұрын
With the Texas freeze that video is a bit on hold. It'll come out soon though! :)
@TBPony3 жыл бұрын
always fun to watch these, you are very good at description and easy to understand. the videos make me feel like we are in the same room and youre a nerdy cousin assembling things ina hobby sense. very fun chill time
@rodrigoborlone31113 жыл бұрын
Hi guy! Your channel channel is awesome, this project is beautiful and awesome, and the intro music is a symphony for my ears, thank to you and your time!
@bsiever0073 жыл бұрын
Commodore themselves would be impressed if they were still around.
@megan_alnico3 жыл бұрын
If Commadore were around they'd still be making C64s/Pets. It'd be a single SOC and cost $5. They were always obsessed with driving down costs.
@MattAlexanderMe3 жыл бұрын
They're still around, among us
@bsiever0073 жыл бұрын
I just did a search. The company is back in business under the name “Commodore Business Machines LTD.” They came back in 2015 and dived into smartphone manufacturing. The first smartphone they created was the “Commodore PET” for the 2015/2016 season and the “Commodore LEO” for the 2016/2017 season. Nothing much has been done since then. The new company is based in London, England UK.
@6581punk3 жыл бұрын
The real Commodore was Jack Tramiel. After he left if the Amiga hadn't gone to Commodore I feel they would have died off much sooner, maybe just become a seller of PC clones.
@prodbywerty3 жыл бұрын
Never before have I seen "46 seconds ago"! Great job, KZfaq.
@RetroDream3 жыл бұрын
Real nice channel. Guys like you are helping kindle the flame of love for these good old things, and it's amazing to see how much people are actually into this stuff. To think that 20 years ago I felt I was the only crazy retro geek... Now with social media we see we're clearly not a few 😉 I'm also a retro fanatic and collector trying to do stuff in my modest corner of YT, and I can tell you I really like the way you make videos: they are informative as well as entertaining. Keep up the great work, there's so much to tell about our beloved machines and their golden age!
@jamesdetenbeck69103 жыл бұрын
That was a blast to watch. thanks!
@thelaw_003 жыл бұрын
When I saw WW1984, was I very happy to see so many PETs in the office. Everything I know about old computers, I learned from David.
@NathanCorleone3 жыл бұрын
Lol, David taught me everything I know too
@johndododoe14113 жыл бұрын
As I remember those years, CP/M PCs and IBM clones dominated, not the PET. But many cases looked like the PET and Apple II machines with stacked CRTs. Then there were the many machines with mini-cabinets, such as New Brain and Spectrum.
@nomodz4real3 жыл бұрын
Will be seeing WW1984 today actually so I will keep my eye out for the PETs!
@paulb4uk3 жыл бұрын
Nice work this looks superb
@dougbergen81573 жыл бұрын
Nice. Love to build that too. Your suggestions to make it fit in a c64 case are great. Love to see this happen too. Love the content. One 8 bit guy to another.
Did I heard "making another game"? Well reasons to finally buy my Mini-Pet are coming.
@ChrisKewl3 жыл бұрын
There may be competition in the miniaturized PET community coming soon. :) Stay tuned!
@frankie92593 жыл бұрын
For what you had I think it came out very good and Chris did a really nice Job , you can really see how much experience he has. Thank You for another fun and interesting video.
@ChrisKewl3 жыл бұрын
Aww, thanks for the kind words!
@sudochop3 жыл бұрын
Get last one video out before the new year! Waiting for the next part of the Studio construction! Love the channel!
@cubeflinger3 жыл бұрын
Back looks unpleasant and given the tools you had available, could have been neater. That said, looks great man.
@mikehensley783 жыл бұрын
for 5v on the power LED 330 ohms to 1k ohms resistor should be fine. that is an awesome machine. i love it! :)
@michaeltempsch52823 жыл бұрын
The generic formula: R=(Vsupply - Vf_led) / I_led Vf_led depends on color if the LED is of the older styles, while newer might all be around 3V and generate blue internally and then use phosphors for the final visible color - if uncertain test/check what you've got or start with higher resistance/lower current for initial testing/verification. I_led can typically be set to 20mA for 3/5mm LEDs, but they're usually almost as bright, and will live longer, at 10-ish... But also beware to not overtax the supply if from say a chip. Then check the power dissipated in the resistor, P=R x If_led^2 and pick an appropriately sized resistor.
@mikehensley783 жыл бұрын
@@michaeltempsch5282 5v supply. 2fv. 10ma draw.= 300ohms. i know the formula. 300 to 1k. 1k if you want the LED to not be so bright. (i have electronics degree since 1996). some indicator LEDs are ran right off line voltage 120VAC that use 1/4watt resistors. 10ma * 5v = way less than quarter watt.
@michaeltempsch52823 жыл бұрын
@@mikehensley78 Comment wasn't really for you, but for anyone else that was in the same, general, but not exactly same, situation.
@mikehensley783 жыл бұрын
@@michaeltempsch5282 oh i thought you were saying i was wrong or something LoL. i was like wait a minute i figured that up before i posted it. i did the math real fast again and was like i was right! LOL. but yes. your formulas were right on! happy new year!!
@mikehensley783 жыл бұрын
@@michaeltempsch5282 also, it is good to see another electronics nerd! :)
@cowprez2 жыл бұрын
Memories galore!!! Thanks for this..
@AlexeyFilippenkoPlummet3 жыл бұрын
David manages to make such small things like modifying a case enjoyable and whole project with its clear goal, results and nice inspiring additions like game development and plans (I'm an indie gamedev myself). Very nice video to end 2020!
@jamesgarwood68663 жыл бұрын
Tynemouth is actually pronounced “why aye man” 🤣
@bloodyhell63783 жыл бұрын
Dave: "filling those gaps would be too much trouble" Parifractic: "Hold my beer.."
@ojbeez52603 жыл бұрын
To make the case look better take the 'BBC Micro approach'. Cut a hole that is rectangular that can fit the whole keyboard into it. Then use some poster card (Black?) and cut holes out in it to the exact shape to harness the keyboard into the rectangular hole and attach it to the underside of the top part of the C64 case making sure its overall perimeter is slightly larger than the rectangular hole cut out of the top part of the case so you can stick the edges to the underside of it. ADDTIONAL: You can also line the Poster Card with black self adhesive laminate (similar looking to what the BBC micro has - available at arts & crafts stores). It will look much more professional and no unwanted spaces or holes!! :)
@vanrose98573 жыл бұрын
Yeah, I did see Perifractic build out additional case structure before. He made it look easy somehow. I was really impressed!
@ionuttoma37823 жыл бұрын
@@ojbeez5260 Bv cat una este greu si noi rapoarte cf greu fimeri multi hoti si multi hoti si dai sms ok da greu este
@ionuttoma37823 жыл бұрын
Ok ok
@ionuttoma37823 жыл бұрын
Cf ok ok
@shawnparker73 жыл бұрын
Awesome video, David! Hope you and your family have a safe and Happy New Year!!!
@jeff97ish3 жыл бұрын
You are a man of many talents David! Wish I was as handy with soldering and cutting and filing things as you are. I always enjoy your videos!
@sierraromeoromeo24443 жыл бұрын
Practice makes perfect :)
@Bry100223 жыл бұрын
"How many videos about 8-bit stuff will you make?" David Murray: Yes
@shagheadguy48053 жыл бұрын
It’s in his name
@atelektase3 жыл бұрын
he lS called the *8-bit* guy for a reason, you know?
@theoparke3 жыл бұрын
You know what I love about your channel? The complete and total absence of politlcs
@peanutismint3 жыл бұрын
I come from the North East of England about 10 minutes away from Tynemouth and so I’m really proud to have the likes of Tynemouth Software being world famous for things like the Mini PET!
@mannycarrion78623 жыл бұрын
Happy new year's 8 bit guy
@TechsScience3 жыл бұрын
you preserving the old gaming technology Deserves respect
@Okurka.3 жыл бұрын
But it's all brand new.
@TechsScience3 жыл бұрын
@@Okurka. but the technology is old
@superpowers043 жыл бұрын
Kid: "Hey, mom? Can we get a Commodore 64?" Mom: "We already have a Commodore 64 at home" The Commodore 64 at home:
@RetrogradeScene3 жыл бұрын
Fun project. looked great in the end. I might look for a project like this year. Love to have a new build 8 bit machine in a nice case.
@mannycarrion78623 жыл бұрын
Happy new year's 8bit guy
@lewisplayspool3 жыл бұрын
To all Mega Man Battle Network fans: Don't be disappointed, here's a new type of PET you can learn about!
@eddiehimself3 жыл бұрын
It's pronounced "Tine-mouth." I was actually born near there lol.
@jamescurrie013 жыл бұрын
great vid, love the custom modifications
@Robert-nz2qw3 жыл бұрын
Oddly satisfying build. Happy new year from Sweden
@RetroGameCoders3 жыл бұрын
That's awesome, definitely makes it nicer to use. For mine I think I still want to design and print something more PET-looking (but more compact). Hmmmm 🤔 The best thing about the Mini PET versus a real one - they should be more robust over time whereas the real ones, even if they survive shipping to Canada, will eventually need a lot more maintenance :)
@ChrisKewl3 жыл бұрын
I agree completely. My goal for a drop-in replacement solution would be something that could go in a breadbin case as well as C64C styled case. I think a custom breadbin would look pretty amazing with the Mini PET. Obviously anything you do would have to be 100% reversible with no case mods at all.
@bankaa92933 жыл бұрын
Techmoan: I don’t know about you, but I don’t really use dental floss...
@bankaa92933 жыл бұрын
For those who don’t know, Techmoan wouldn’t leave the 8-bit guy alone kzfaq.info/get/bejne/ma-Igqti2bCupWg.html
@Konym3 жыл бұрын
Right in time for me getting off of work. Happy new year!
@LukeNixsound3 жыл бұрын
I don't even wait to watch the video before I click the like button on this channel anymore. Another awesome video, cheers David.
@OrderoftheWarlocks3 жыл бұрын
Um, when are we getting more awesomeairguns?! >:(
@ChocolateGaming10003 жыл бұрын
KZfaq would ban him lol.
@ChrisKewl3 жыл бұрын
Too many projects, not enough time. That channel didn't have as much traction so it was left sitting. Even 8-Bit Keys has more traction.
@Desmk23123 жыл бұрын
Because that Channel is no longer use anymore Also because Everyone especially on the Twitter hate The 8-bitguy because that Channel
@mcmahon316193 жыл бұрын
3:40 the cassette port kind of looks like a set of Mickey mouse ears
@Wegetsignal3 жыл бұрын
Super cool project!
@steamedbuninvasion57923 жыл бұрын
Good to see you back!
@haydenthirties45343 жыл бұрын
I wish I could get Patreon for the 8-Bit Guy but I don't have the money sadly.
@ChrisKewl3 жыл бұрын
You can still support him by liking, following, telling your social media or volunteering to help. Many ways you can help without paying a single cent. :)
@haydenthirties45343 жыл бұрын
@@ChrisKewl I know and I do. But it's not the same. I really do wish I could. Thank you for the heads up anyway. :)
@cris8723 жыл бұрын
Great video, I'm really loving your content and even getting more interest on old computers, badly on my country that kind of things doesn't existed at all
@NeilRoy3 жыл бұрын
So many memories. Back in 1979 when I was a teen, I couldn't afford even the cheapest computer and would have taken ANY computer handed to me and enjoyed it. Never really used a PET, but i think I messed with most models as I used to skip school and learn to program them from a combination of the public library and store displays. :)