Building a Fuzz Face - DIY Guitar Pedal - Part 4

Building a Fuzz Face - DIY Guitar Pedal - Part 4 - Soldering

Рет қаралды 1,994

2 жыл бұрын

This is the fourth video in a four-part series, delivered to Music Production students during the lockdown, where I walk through my own process of building a Fuzz Face Guitar Effects Pedal.
In this short video installment, I solder both a PNP and NPN version of the circuit onto pre-made PCB's.
Link to the PCBs on eBay: www.ebay.co.uk/itm/143181890056
Part 1: • Building a Fuzz Face -...
Part 2: • Building a Fuzz Face -...
Part 3: • Building a Fuzz Face -...
Part 4: • Building a Fuzz Face -...
musictechknowledgy.com/

Пікірлер: 5

@benebluesman Жыл бұрын

Clicked cause i recognized those boards. Just built 2 and have another couple pcbs coming. I did the pnp stock with sockets. Started with silicon but found a pair of germanium transistors. Npn I crammed a few mods in namely bias trimmer for q1 and bias control for q2 and capacitor alternatives.

@MusicTechknowledgy Жыл бұрын

Great stuff, ben. That sounds like an excellent build. I've been re-learning KiCAD recently to make my own PCBs for some of these projects.

@joejones7674 Жыл бұрын

Hi, I have these exact boards and I cannot figure out how to connect it to my jacks etc. could you show me how you connected it all up please. I’m really stumped here. Joe

@MusicTechknowledgy Жыл бұрын

Hi Joe. One of my next planned videos is on wiring up the boards to the jacks and foot switches. I'll link it here as soon as it's done.

@joejones7674 Жыл бұрын

That’s fantastic thanks 😊