I like clearing tree's with a ripper. It's easy to load the chipper and take out the stumps.

Another awesome job you’ve completed!!👍 As a maintenance man my boss wanted me to clear off a 1/2 acre hill for more rental apartments. She ordered a new Kubota U27-4 with a cab and heat, which I love but it’s on the small side. But hey, it beats a shovel! I use a 4’ steel beam to cut swales and with the beam cut out on top I can use the bucket teeth and thumb to swing the house to move and level material. Soon I’ll be putting in catch basins, pipe and culverts as well as building a road. When I get everything on grade she’s hiring a concrete company for the building foundations. Lots of work to get done. But I couldn’t do anything if it wasn’t for God. I’m glad I have a Christian boss, too!

That's a heavy bucket by itself... I know I own one!!

So great to watch this and enjoy+

I've got a kubota kx057-4..with a 18 inch tooth bucket. For lot clearing and stump removal. I find that works well for handling tree removal. Otherwise I will use 36 inch tooth bucket. Plus a 4 foot grading bucket..When I'm dealing with tree's less than a foot in diameter. I use a ripper on the stumps.. Thanks for all the informative tips in your videos....

I love my 305E2 with my 51” ditching bucket. I can clean ditches and ponds all day!! Love it!

I so enjoy your videos, so informative, learn so much, your attention to detail and your work ethic is a marvel to watch! Your skill level on the excavator is exceptional!

Killing it! I'm happy to see the combination of time lapse and talking/realtime.

The time-lapse really shows your bucket skills. Enjoy watching your content.

I think you need a skidstear....I love them

The audio sounds great! Enjoy your "Broadcast"

In my pecious profession we had a smaller excavator (Bobcat e35i) that we had a 24" tooth bucket and a 36" smooth bucket. I found that if I couldnt cut with the big bucket I would switch to the tooth bucket and "rough in" what I needed then chase finish grade with the smooth face. And as far as load outs of loose material the smooth face was the only way to go. It would take 10 minutes to load 3 yards of material! Unfortunately we didn't have the tilt coupler but regardless I could rock that little excavator!

Perfect job. The audio and video is perfect now too. I know they will enjoy it now.

Mighty fine job. Thanks for sharing.

Love my Cat 306 with the root ripper! Love running my Cat 289 with a grapple bucket! Good video! 🇺🇸💪

Great stuff....glad your loving your new bucket.

Looking really smart, good job Todd

We took a page out of your book Todd and made our channel commercial free for the upcoming snowstorm. Hopefully like it did for you it will attract more subscribers 🤔 That 4 foot bucket is going to be perfect for you. Looks very well-built 👍🏻

The audio and video was great. I like the combo of timelapse and in-cab footage

Super pekna praca sikovny 😉👍👍👍👍👍👍

Nice work brother

Great job

Nice job there young man.

nice job my friend !!..thumbs up

I’ve got a yanmar VIO 50 and I use a 48” grading bucket on it Works great . My favorite machine I own is ASV 120 forestry package with a 72” prinoth forestry mower on it

I enjoying all of your videos. I like all the information and details.im getting ready to start my own excavation business and I've been learning alot from you .Thank you for your videos

Enjoying your videos. I have a micro mini-excavator and all my big contractor friends want to borrow it. Figured maybe there is a market there. You have taught me a lot. thank you

This weather's killing me! I usually wake up early and watch KZfaq until Jenn gets up on the weekend or time for work during the week. I've had to get out and plow ever since this video came out. I'll get through it eventually.

I love my hydraulic top link! Saw one on your tractor and thought why the hell don’t I have one of those!? Not very expensive at all. Favorite attachment... is the one that’s making money that day! 😉

Komatsu 400 lonng stick was my fav, but iI was in pipe business enjoyed your vid

Seen you on DP so came over and watched. You do a good job. Definitely adding to my subscriptions.

Got a TB235 and a tilt grading bucket. Still getting used to it. The geometry is a good bit different from the regular bucket but its a game changer for sure. My other favorite thing is a 10' I-Beam that I use as a grading beam. Just grab it with the thumb and plane things off till its as smooth as a pool table.

HI, saw you on live with Mr. Dirt Perfect yesterday, I reale like this format of filming. Very good explanations of what your about to do, and the combination of timelaps and realtime is nice. Looking forward to see more. (I'm doing landscaping in Norway).

Good job bud

Nice work i would just love to have a piece of equipment like that and that bucket is like whaaaat

So ... I've been watching this exact same content for years on KZfaq, but they've NEVER recommended your channel until I saw it randomly pop-up today. Maybe they should spend more time and money on upgrades that would better serve their customer, instead of banning and censoring them into oblivion for wrong-speak-think. But hey, what do I know... I'm not a tyrant. Anyway - glad I found your channel. [SUBSCRIBED]

Smooth is fast fast is smooth

*Awe man I can't wait for the weather to break I have a parking lot to install. Nice grading bucket that would make life easier!* #WorldsOkayestFarmer

I made a bolt on grading rake for my machines

Great job. God bless

Nice work!!... (y)

1st time here; caught you on Dirt Perfect pod cast and thought I'd check you out. I'll have to come back: stay safe out there!

Like others, you randomly popped up when I was looking at grading/gravel work examples on YT, and BOOM!.... I watched a bunch and quickly subscribed. You are very good for us beginners ;) I wish I had the money to afford an excavator like that, but alas, I'm stuck with a Deere 1025R with a box blade, tiller, rake and other attachments. That parking area came out GREAT! I'm doing a culvert for the swail in the road leading to the property, then a gravel driveway and also a parking area down here in South Florida in the next few weeks. I don't have as much slope, in fact, it is almost completely flat, but have very sandy soil..... I'm curious, what fabric do you put down? Also, would you recommend asphalt tilling? Thanks! Keep the videos coming.

Audio is much better with the mic

If I had a 299 be skid steer with a a caterpillar 308 excavator 6in bucket and I had no problems

Turners out nice man .. great job

Have you tried "the amazing tile tape" it's great stuff for drainage

If got the same bucket on my Deere 50G. I’m still trying to figure out a trick to connecting the hoses without having to crack the lines at the cylinder to relieve built up pressure. Any trick to it?? This is going to be my favorite attachment once I really get to use it.

Hey Todd, Another great video! Thanks for sharing. What brand is the tilt bucket?

416 , 4x4 , 4n1 bucket

Looking good man! How thick do you typically go with your base? And I think the Yanmar controls have a lot to do with smoothness because they are very touchy. I've found I almost have to run mine with just the fingertips to keep from "man-handling it."

cool nice work. i know you knew that lol

Hi Todd. Just wondering where do you buy your rolls of mat you use? Love the videos brother keep them coming

The mic makes a world of difference. There's still some distortion of your voice but at least now you are understandable. Thank you.

What's the plastic you used called and was it expensive? I live in TN so prices might be different.

Iam suprised you don't have a ditch bucket, because of how many coverlets you do ? Would make that part way easier

With your tilt bucket did you have to change anything on your joystick s to operate it?

What size is the biggest rock in your road bond? In Alabama where I am, they call it CR (crusher run). We can buy 3/4 cr or 1&1/2. The material that has to be a certain mix and certain % moisture they call pug mix. Used right under new payment of chip seal. Thanks.

How many tons can you haul in your dump truck? I'm thinking about getting a single axle myself

Hi this is John what would you buy if your yanmar had to be replaced?

You might have to explain the 1980’s commercials with Ernest so your viewers will understand the “You know what I mean Verne?” saying. You said it when you were putting tape on the culverts.🤣

were do you get your fabric at?

What size tractor are you operating for the 4ft grading bucket?

My. 620i. John Deere gator

Should have packed the other way on your last go cause water will hit your track marks and will start making water ways. That’s what happened to me ONCE and only ONCE.

I've got a Kubota KX-057 and the bucket manufacturer is recommending a 48" bucket for it. I think its a decent amount smaller than your machine? Anyone know how it'll handle it?

why have you left track marks on it....... would it look better if you ran your bucket over it to smooth it over..just asking lol as always a great video, keep them coming.

What brand of tilt bucket do you have ? Thanks

Do you use woven road fabric?

is road bond same as crush and run?

What is road bond? Or crusher run?

What size is your new bucket

Kobelco 140 sr with a roto tilt was a good setup but best hoe I have run was komatsu pc 200 lc

What year and size is your yanmar excavator

Nice work! I also have 2019 F750 with 14’ dump. How manny tons max can you carry? I load my F750 with 15 ton of gravel.

Love your “Broadcasts” 👍🏻 we would love to know the make and model of your grading bucket. We just bought a KUBOTA KX087-4 and have been looking for a tilt grading bucket. Sorry about Marvin, Keep the videos coming. Thanks in advance Glenn Christian from Beaver Creek Land Management.

Todd you need a grade system or at least a rotary laser it will pay for itself the first time you use it..

You understand drainage, most people don't.

That’s a ideal size machine . Not many yanmars in my area ... has it been a reliable machine for you. Any issues ?

What are you paying for ABC OR Roadbond per ton I've been buy alot of stone and was wondering what prices are in your area I'm 2 hours east of you.

I really want a grading bucket for the mini, I have a new track loader or skidsteer and have a grading bucket with cutting edge, don't know if I should still get one

HI IM a new subscriber Mr Dirt Perfect sent me

What are you calling Road Bond

I have a question. Is it more cost effective to just have a transfer truck or truck and pup bring you gravel instead of you making several trips? Seems like it would keep you on site more plus less wear on your truck. Just curious

Dump truck or dump trailer for someone just starting a business?

Why did you buy yanmar over it’s competition?

Hard to tell how much sloop there is a camera.

smaller bucket full cost fuel, clean up is cheaper to clean up than cost of fuel

This was a very hedblomish video

16:00 what kinda gravel are those that you putting over the pipe?