btw if you lower a car with solid rear axel, the whole rear end is gonna shift towards one side because the cross bar in the back is pushing it, you need an adjustable one

Они строят русскую машину в японском стиле,находясь в Польше)

Absolutely love this car and Marek's vision with it. Great to see something unique and old skool getting proper fitment. Keep it up guys!

Now that's an improvement. Looks way better without the black tint. It's gonna sit nice once it's done. Also i think I like the black seats more then the cream ones.

Don't know if someone already said that but it seems it have a panhard bar on the rear axle so when you raise and lower the axle it shift a little on left and right too, you need a adjustable panhard bar to centre the axle. Love this kind of projects Marek, keep it on with the great content guys!

Have you check parts for fiat/seat 124? It is basically the same car, and I am sure you can get those parts in Spain and Italy! Also wide arches, which look really nice on those cars!😊

As an American, I'm glad to say I know what a Lada is.

Good job guys ! Big love from a Romanian living in UK with his family and wishes a lot to go back home and do what you do for the rest of his life. You are a truly inspiration for a lot of people all over the world, I want you to know this. Bless ya !

Сместилась задняя ось из-за того, что тяга поперечная сдвинула мост, нужно сделать её регулируемой)

Nightride always makes my days better when they upload a new video!

Щиииишь🤙🏼 Вот он и стилёк подъехал) Ждём, когда данное чудо упадёт на пузо) Да, как сказал владелец: она не стала низкой, но стала ниже) и в этом так же есть свой стиль) Красавцы!) Ловлю максимум фана с этого небольшого проекта и с эмоций самих ребят)🔥

Привет из России ❤ очень давно смотрю Вас 🔥 контент топ 💯

Странно что тут так мало комментов на Русском... Классно делаете, удачи!

Adjustable panhard bar. Offset in the rear is probably fine. You can cut your existing panhard bar in half, shorten one half a bit, then weld one half to a nut and half to a matching bolt so it is adjustable to get it just right.

beautiful job guys, love your work!

I love the lada so much the fact that you guys are now just building a car cos you like it is so cool and i want to see more stuff like this 😃👍

Sooo sick! Much Love Nightride!! 🇨🇭❤️

Man these videos are amazing, great inspiration for me getting into cars! Keep up the amazing content lads 🤘

0:11 The car, the drift, the words, the accent... pure KZfaq perfection

No one else really modifies the car that Nightride does, always something unique with them

Glad to see Marek building his dream car

As I say, there is a big difference between collecting and driving cars 😂 two different passions ❤️

Plus Minus ....perfect german Dude ^^

Love u guys sooooo much you are one big reason i love wroking on cars. KEEP it UP!!! mutch love!

If you want to get a better suspension you need to use the springs from a Niva because the material is thicker, you just need to cut out a bit. On my lada i cut out at the rear 1,5 rounds out and at the front 1 round.

Reminds me so much of a smaller volvo 240 and somehow more simple! Absolutely love it boys

I love the Lada, it's amazing ❤️

Found your channel last week and now I've watched most of your videos from the past year. Amazing stuff you get hooked right away! Keep doing what you're doing! Love from Sweden

LESS GOOOOOOO LOVE FROM 🇿🇦🇿🇦🇿🇦🇿🇦🇿🇦❤️❤️❤️❤️❤️❤️❤️❤️

love the videos guys keep it up, the lada looks wonderful

I think Marek is a bit happier since the Lada purchase and I love it ❤️😊

Nightride definitely has the best content in the game y'all inspire me every day!

Love the build Marek!

Awww man, I just love this project. I'm so excited to see how it goes. Keep it up guys

Would love to see mirrors moved on the hood/front quarters

Everyone else gave good advice so I'll just let you guys know I love it and keep up the great work!

I love the look of this car! Well done!

Disassemble tail lights and wash them from inside, they’ll look great and all back of the car will be so good looking (from my experience of detailing my Lada).

Хахахаха, я подумал что это какой нибудь Мицура, но оказался не прав( Интересно видеть такие родные проекты для всех пацанов с гаражей, ведь у каждого современного русского подростка, есть мечта с получением машины сделать её в японском стиле, и многие так и делают. Я тоже не стал исключением, у меня 6 на китайских hayashi и с выхлопом сердечком. Желаю вам самого лучшего друзья🔥🔥🔥. Привет из Воронежа(Россия)

Hotboi Lada 🔥

Reminds me of late 70’s early 80’s JDM. Love their mods. Keep on keeping on! Greetings from LA🖖🏽

Nice work guys !

Marek, love seeing 06 Lada content. Original and quirky!

loving the lada. my favourite night ride car so far ideas for vibes tint side indicators orange to match the rear lights remove big rubber blocks from front and rear bumper remove wind deflectors from window shorten panhard rod by 20mm to centralise rear axle from lowering

So dope seeing new sht happening with old stuff

The extra spacing on the other side could be because solid axle rear end. When you lower solid rear end usually it pushes to one side.

Передние пружины можно поставить от нивы, они жёстче и перенести крепление передних амортизаторов, тогда работа подвески будет сохранена и ездить будет в целом нормально

Badass lada, getting look better

The best car...love the Lada👍😎

Looks beautiful 😍

swietny film dobrze sie ogladalo przy jedzeniu

After the wheels the car looked alot better! Great video again guys!

It looks sick brother, love the mk3s! hyped for you!!!

thank god we have nightride for bad days :)

I'm the proud owner of a bogstandard 1.8T VW New Beetle, and I'm considering a classic Lada as a weekend car. I just love the fact that it will instantly punish you for not "driving" it properly. That and low power drifting. If I ever aquire a Lada, I will make it a bucket list item to drift it in the snowy mountains of Poland. Shoutouts to Stanny ;) edits: drunk typo's

Badass Lada 🚨

Looking sick! Love it so much!

pleasure for eyes. good luck from Russia

Брат, у меня такая же, люблю её больше всего в мире, хотя за что? Все сделано плохо, это не машина, это повозка, но такая родная и любимая )) Удачи во всем, буду следить

i love watching you guys work on cars it isnpires me and day by day it makes me more exiting to turnm 18 and get a car and drivings licensce

It looks f`kin awesome.👍👍👍

great Projekt again :)

Rad guys.. congratulations on 600k. Just some more time for the mil mark. You guys will take off for sure

there's no coilovers for ladas, we install stiffer springs (usually from nivas) and shocks, or you can weld together two stock springs, as i did, leaving stock shocks. yeah, car's gonna have a very wobbly ride, but it's as stiff as you can get. and btw, on stock front lower arms bolts, max camber is 1.5-2,5°, depending on how low your car is. if you want more camber, you gotta install longer bolts and last: if you put 7-7.5J wheels on the back, especially via spacers, the only option to substantionaly lower a car is to cut the arches. but the vast majority of stance guys here in Russia dont do that, they just accept their fate, that fornt is gonna be lower anyway. front arches can be rolled more than back ones, and it might be a way to go with such wheels. ps. and throw away those horrible mud flaps, i beg you. thore are considered cringe in Russia)

Wow, another night ride video, coincidentally, another like

nightride and lada 👌👌

OMG, Beautiful!

Exactly what I envisioned seriously first go at it from last vid. Just need that roll/fender pull . Also lowering a solid axle chassis well make the rear of the body push to one side . Need to make a adjustable panhard bar to center the axle . Engine swap a year from now 🤔. I could see a ported 2 rotor 12a style in it , dual carb , dizzy . Simple and almost period correct . Keep the progress going loving builds seriously 👊🏼🍻🖤

Best felling when NIGHTRIDE upload video 😮‍💨

4:15 in a Lada it's still relatively useful, I've seen tow bars on BMW i3s. Great video as always

Super robota chłopaki!!!

If you need to get camber at the back of the car you can get a kit from e30 that installs bolt on on lada people in russia remake it for this purpose, or you can just bay an e30 rear axle and redo it yourselves. for the front you need to buydrift levers from club turbo that will give a whole bunch of different settings to choose from. To lower it you either can buy coil overs from ajs ( a shop in russia) or you need to buy “ss” shock absorber and some NIVA springs connect to spring for one place( to make the suspension tougher) and cut off 2+ coils off spring

Just good stuff boys

0:12 ahaha love you Marko

Been waiting on this video less go

For the front coils i personally use Mercedes 123 300d front coil cut in half ( yes only one is needed) in my 2101 and its fine. Rear coils is from Saab 900 fronts cut to lenght…. Fine setup from junkyard 😂

Looks so sick guys! Great ride height now Gimmie wheels thanks

Cant wait to start my own project next year

Very interesting and chill video about this car! By the way, the my father's first car was 2106 Lada or "Shokha". Keep going, NIGHTRIDE!

kocham wasz kontent🔥🔥

The godess of beauty!

Watched from Nigeria 🇳🇬 🙌🏾

Marek taking off the steering wheel has been the funniest thing I saw today lol

Stock and good fitment is nice

Bro.. your vids are motivation

I've been waiting 👀

for suspention use: in front - vw t4 shocks, cutted lada niva springs rear - lada niva rear shocks, cutted volha springs

The Lada is cool.. 🤙

Love you content 🔥❤️

I think its the same chassis that fiat made for the seat 124 and people rally those maybe you should look into that. Here in spain, or in italy for the fiat 124, you might be able to find coils and other interesting stuff. ;)

Hello I'm from Argentina, I love videos like thisss. I always see them

How cool and right in beginning dude says "Zhiguli")

That looks fun! Good luck! Cheers from Aktau, Kazakh

'lift the car 🤮' lol! The Zhiguli looks sick.

I really like where this is going. As some mentiones, Fiat/SEAT 124 parts might be used or maybe you can just check other people builds for some inspirante though I think Mark's vision is on point!

Lada 2106 the finest piece of technology Russia ever built!

Big hello from me and my friends over here in new Zealand we all love watching your guys content

Для Польши и западной Европы может это и интересный проект, но для Украины, расии и тд уже заезженный до дыр контент! этих жигулей уже тысячи проектов было. Но вы все равно красавцы, смотрю с 20к подпищиков!😘

Hey guys! I'm from Latvia and the lada looks fire. Very nice content

Молодцы пацаны!!! Привет вам из Германии