how to make a manual tire changer. In this video we share some unique features of this machine, how it was built , and how it works. this was a really fun project that turned out really well,
Пікірлер: 106
@brendatodd32223 ай бұрын
So much thought and detail . My husband is overwhelmed the best video of tire changers he has ever seen
@taccom16172 жыл бұрын
I have had a cheap chinese manual tyre changer for years and watched lots of these vids. Your bar is the best and the slow and steady explanation was also great. Looking forward to more content
@workingwithjoe8412 жыл бұрын
Wow, thanks!
@corinnehall33602 жыл бұрын
Seems like alot of thought went into your tire changer. Very creative. Wow the train track is so close to your house.
@workingwithjoe8412 жыл бұрын
Thanks mom
@jsparlin1 Жыл бұрын
reminds me of a song...'too much time on my hands' you can buy a pro changer for 1500.00. so much work.. very impressive tho
@matthewwiddows63192 жыл бұрын
Definitely one of the best manual tyre changers I've seen. Like the little touches like the bead breaker clamp. Would suggest a duck bill head, but if your only doing old steels then probably easier with just the bar.
@workingwithjoe8412 жыл бұрын
The bar does aluminum wheels without any marring. only plastic touches the top of the wheel. I considered a duck bill, but not only would i have to buy the duck bill, but i would have to have a centering cone machined. I have seen duck bills put on the end of bars, but they are made of soft material and wear out quickly. please bear in mind that it was well below freezing that day which makes rubber very unstretchy. The bar actually works very well, although after you build something you can always see ways to improve it. thanks for your thoughts and have a great day!
@joeserrano68602 жыл бұрын
that"s engineer to the next level , good job
@workingwithjoe8412 жыл бұрын
Thank you!
@ejennings988 ай бұрын
Great work
@johnmorton75772 жыл бұрын
Wow amazing I'm going to try to make this this spring I love that it was a father son project those are the best tons of memories built into this tire changer
@workingwithjoe8412 жыл бұрын
Thanks! and good luck with your project!
@SuperUncleRyan2 жыл бұрын
I absolutely love it. I love homemade machines like this that are so practical and useful.
@tommccully2109 Жыл бұрын
Everything very well thought out. Great job.
@JasonTheMunicipalMechanic2 жыл бұрын
Nice design and well thought out.
@workingwithjoe8412 жыл бұрын
Thank you
@DS-mm6fh2 жыл бұрын
Cool design guys ! Thanks for sharing ur awesome machine
@workingwithjoe8412 жыл бұрын
Thanks for watching!
@1TommyVercetti12 жыл бұрын
I love your design. You could always use a spray bottle with a little dish soap and water after to break the bead will help the bead come off the rim extremely easy. You will see the difference with dish soap and without.
@DIYVariety2 жыл бұрын
Very interesting, looking forward to your next vid.
@workingwithjoe8412 жыл бұрын
Thanks for watching!
@KBLIZZ333Ай бұрын
Wish i was this creative
@workingwithjoe8419 күн бұрын
It comes with retirement. (too much time!)
@ronbrown1242 жыл бұрын
Wow hope I'm wrong but the house siding looks like that old Asbestos stuff used in the 40's-60's
@GoaltoGo2 жыл бұрын
Everything zen. It's not friable therefore not a danger until removed.
@workingwithjoe8412 жыл бұрын
Shhhhhhh!!
@KBLIZZ333Ай бұрын
My house was built in the mid 70's and vinyl siding was put right over top of them old asbestos shingles. Fairly certain I'll die from the big C one way or another. If not the grinding dust, welding fumes, tap water. Micro plastics will get me. That or a random car accident 😂
@graciebonsai72722 жыл бұрын
Excellent engineering gentlemen!
@workingwithjoe8412 жыл бұрын
Thank you!
@Liazon0982 жыл бұрын
Really neat that you have compressed air in a cylinder!!
@richardhadley51892 жыл бұрын
Very nicely done. Great job
@workingwithjoe8412 жыл бұрын
Thank you very much!
@curtissipes6752 жыл бұрын
Very nice job, Guys. Keep up the creative thinking.
@hellojrod2 жыл бұрын
awesome diy tool! I would seperate the tank and keep it a ways from my shin/knees/gonads. Just in case.
@workingwithjoe8412 жыл бұрын
Good tip!
@adamrubinger26442 жыл бұрын
Propane is pressurized up to 200 psi, a propane tank is one of the safest "recycled air tanks" you could use.
@mathewstoll50382 жыл бұрын
Very nice. I made my own "smutch brush"? using twisted 12 ga. copper wire, still good after about 8 yrs.
@workingwithjoe8412 жыл бұрын
Never even thought of copper. Good idea.
@jerryfallin17532 жыл бұрын
I have been using o parts cleaner brush for years and it's works great.
@michaelabraham91772 жыл бұрын
I love this, one of the most well thought out designs I've seen. I've got and old balloon helium tank, they're rated for 200 plus psi. I was gonna make it into a portable air tank, but now I've got a better idea thanks to ya'all
@workingwithjoe8412 жыл бұрын
Always nice to here someone appreciates your time and Effort. Thanks!
@georgeroberts6132 жыл бұрын
Best homemade yet:)
@workingwithjoe8412 жыл бұрын
Thanks!
@jamesshepherd50932 жыл бұрын
looks great , i might build me one,at the rate of getting tires put on these days or flat fixed
@raticide4you2 жыл бұрын
great job !
@workingwithjoe8412 жыл бұрын
Thank you
@nvmcrider84752 жыл бұрын
One of the better designs that I have seen. Do you also have a tire balancer set-up?
@workingwithjoe8412 жыл бұрын
Thanks, and yes but just a cheap store bought bubble balancer.
@upsidedown19862 жыл бұрын
Great job 👍
@workingwithjoe8412 жыл бұрын
Thanks 👍
@bangs2ndshotgarage8652 жыл бұрын
Man that is a nice designed tire changer. Idk if I have the ability to duplicate it though. I have the HF one and it is a pain in the ass to use.
@workingwithjoe8412 жыл бұрын
Thanks. I started out thinking I was going to copy a HF but make it a little beefier, but then i started thinking wouldn't it be nice if... which is always what happens when I build something. I'm not a welder. it's not about skill. I just think while i'm building, that I want something that I will like, and a little more time here or there is worth it to end up with something that i will be able to use for years.
@DaveCollierCamping2 жыл бұрын
Great info
@workingwithjoe8412 жыл бұрын
Thanks for watching!
@ericknutson82302 жыл бұрын
it's obviously very cold there,,,,,,,that makes it really hard to do. Even as cold as that rubber is it works extremely well,,,, it will work fantastic when things warm up! Great job!
@workingwithjoe8412 жыл бұрын
Yes, we should have waited till summer to do the video. We also could have done a car tire which is much easier but that felt like cheating. Thanks.
@musicauthority78282 жыл бұрын
The only improvement I would suggest is to make your tire soap dispenser removable. so it can be removed during cold temperatures. because tire soap is a must for changing tires.
@workingwithjoe8412 жыл бұрын
I agree.
@SuperUncleRyan2 жыл бұрын
Yeah, you just need essentially a cup holder that would hold a coffee can.
@Farm_fab2 жыл бұрын
I'm going to build a bead breaker with an air cylinder so I don't have to fight it as much. I like your idea though. It looks as though you put a lot of thought into this project. My manual breaker bar is a handle from a hydraulic shop jack. I bought my horrid freight tire changer for $15 USD, and it was missing that handle. It's definitely heavy duty, but fortunately not OEM. I found an antique tire spoon at the scrap yard, and added it to my tire tool collection. Get a piece of stainless steel antenna to make your new shmutz brush. It might not be that expensive that way.
@workingwithjoe8412 жыл бұрын
Good luck with your build. I love how much creativity just happens when people build things for themselves.
@jimgarrett70782 жыл бұрын
Bad assery!!!!!!
@workingwithjoe8412 жыл бұрын
thankulous
@albrighttopover2 жыл бұрын
Very good handle with that, good developed at all, specialy the schmutzbrush, haha,sorry.
@workingwithjoe8412 жыл бұрын
thanks
@maxwellwoodhouse29082 жыл бұрын
An amazing channel with only like 248 subs ? I’m in lol
@workingwithjoe8412 жыл бұрын
Welcome aboard!
@brendatodd32223 ай бұрын
How long from start to finish were you able to complete this project?
@workingwithjoe8413 ай бұрын
We worked on this on and off for about six months. Actual work, it would probably take is three or four days once we had a good idea of what to do. Thinking it out is what took the most time.
@craigmeyers87932 жыл бұрын
Nice
@workingwithjoe8412 жыл бұрын
Thanks
@frankc64302 жыл бұрын
Interesting build and details for a tire changer while I just got mine from harbor freight and tweek it a bit for my tires... the main problem that I see on this one is the old propane tank that will be holding all that pressure expanding and contracting many many times while those tanks are supposed to be hydro tested every 12 years by law to avoid a catastrophic accident and you have welded that tank from just about everywhere and is not serviceable ever , imagine that when a tire explodes at 35psi now imagine a metal tank at 100psi , it will hurt anyone close by and even the building... I would build it with the tank far away from the operator just in case shit !... applaud you for the ingenuity but I worked with gas tanks and I would not feel safe working close to that mini bomb... just my worthless 2 cents.
@workingwithjoe8412 жыл бұрын
Started with a tank that was un-weathered. The average internal pressure of a propane tank is about 150 PSI., while we're running it at 80PSI. Air compressor tanks are welded on all over. In the event of a failure, the tank would split. It would not BLEVE, nor would it be a combustion explosion. Of course, I was wrong once before HaHa!!
@hotshoter22 жыл бұрын
Use a piece of cotton rope or some old towel tore into strips for your soap brush
@workingwithjoe8412 жыл бұрын
Thanks for the tip.
@frankc64302 жыл бұрын
I just use a simple sprayer with soapy water .
@dws23132 жыл бұрын
Great job! But, I was looking forward to seeing how the blast of air worked under the tire (and the hooks), and you didn't show it! So, I still don't understand that part ....
@workingwithjoe8412 жыл бұрын
watch the part of the vid where we show how the crank squeezes the tire and you can see how the nozzles point right where the tire meets the rim, no matter what the tire size is.
@dws23132 жыл бұрын
@@workingwithjoe841 Yes, but when you inflate the tire, it looks like the hooks and nozzles would still be in place on the rim, not letting the tire expand properly. I looked again, and you just picked up the tire after inflating it. So, I assume you unscrewed all the lower hooks, first. But, then how did the nozzle help inflate the tire if it was no longer in place?
@workingwithjoe8412 жыл бұрын
Right after we step on the blast, we unscrew the hooks. A couple of times we forgot and the tire was stuck on the machine, but if you loosen it right away , when the bead pops it just pushes out of the hooks.
@dws23132 жыл бұрын
@@workingwithjoe841 OK, got it. Your machine is the first I've seen to use the blast nozzles like that. Did you think of it, or did you see it somewhere to get the idea? Very detailed machine!
@workingwithjoe8412 жыл бұрын
A friend of mine hf tire changer and a cheap blast bottle that he would hold against the bead and open a valve. That's what started the whole thing. I wanted to see if i could combine the two. I have never seen anything like it, but it does incorporate a lot of standard design.
@seansysig2 жыл бұрын
Nice! PlastiDip Schmutz brush handle.
@workingwithjoe8412 жыл бұрын
Good idea!
@arthurn92372 жыл бұрын
U GO GUY'S SPOT ON DEAL AND 👁 LIKE THE PUFFER UPPER DEAL THAT WAS BRILL
@workingwithjoe8412 жыл бұрын
thanks
@theodorevegh60302 жыл бұрын
I could see you setting up a factory, and making 1,000,000/yr to sell on Amazon. You will be filthy rich like Henry Ford. LOL - TAV ♥️🇺🇸🌎👍
@workingwithjoe8412 жыл бұрын
Any investors out there?
@chrisdaniels4674 Жыл бұрын
When someone starts with their mistakes you know your dealing with a brutally honest man, an over-thinker like myself. I can tell you we really suck at selling things cause people want and expect the con man salesman.
@CurmudgeonExtraordinaire2 жыл бұрын
That's not neoprene... Most likely HDPE... Neoprene is the type of stuff that wet suits are made out of... Kind of a closed cell spongy rubber...
@adamrubinger26442 жыл бұрын
Good build man. I see a few stupid comments from the peanut gallery... take those with a grain of salt.
@workingwithjoe8412 жыл бұрын
It's all good. Everyone does things a little different. Appreciate the comment!
@somedudeRyan2 жыл бұрын
Nice job, stay warm out there! I'm the 352nd subscriber, I'm sure you'll add some zeros to that soon.
@davidwigley6846 Жыл бұрын
Dang I’ve never seen such a long video just to change a tire
@carlthornton30762 жыл бұрын
Very good!... #89 🐄🦉🏴☠✝
@russellmiller28012 жыл бұрын
Mount your tank valve down so it doesn't fill up with water it will rust out.
@workingwithjoe8412 жыл бұрын
It has a drain valve on the bottom
@adamrubinger26442 жыл бұрын
Cause putting the water in your tire is a WAAAYYYYY better idea?! Edit: YOU EVEN SHOWED THE BLEEDER!
@frankc64302 жыл бұрын
compressed air from the compressor comes warm or eventually hot if long running and that hot air cools inside the tank crating water vapor and also every time the air inside is released like a punch of pressure it also releases water vapor inside the tank and inside the tire because water friction, yes it will rust the interior even if drain all the time that`s why that old propane tank needs to be serviceable/ hydro tested as intended every 12 years but even more now that will be re used as something else containing water as well... tank should be somewhere else in my opinion away from the operator.
@workingwithjoe8412 жыл бұрын
How often do air compressor tanks blow up?
@russellmiller28012 жыл бұрын
You only have to have it happen once. The bottom blew out of mine @ 160 psi. Cracked a 4" fiberglass concrete floor, blew out the steel wall 4 feet, smashed the garage door track. The power cord kept it from exiting the building. I was under a car 20 feet away. I couldn't hear for 2 days. The auto drain feature was not working properly. My new compressor has a manual drain.