🚨PARTS I USED Bearings 99502H (no clip) : amzn.to/2mTFFgB No Mar Removal Ends: amzn.to/2mTIsWP Plastic protection for install (better than milk jugs): amzn.to/2oYIORA Tire LUBE is a MUST: amzn.to/2m8tSL7 Basic Manual Tire Changer Machine: amzn.to/2mLAiVu Saw I used to cut the steel Evolution Evo 380: amzn.to/2lOGxBZ 4 foot 3/4 black gas pipe from the Home Depot/Lowes 5/8" bolt and nut for bearings For the mounting end I used 3/16" steel 4"x4" angle iron cut to 2" wide. I cut the short end to around 1" and left the other at 4". You don't need angle iron and could just bend or cut/weld an angle piece together. 1/8" material is too thin and I would use 3/16" or 1/4" material. Bearings are 1/8" back from the face of the HDPE plastic. The plastic is around 1/4" thick so the bearings are around 3/8" from the inside of the angle iron. You can go to my Facebook page listed below for close up pictures. If you bought everything this would cost you around $25 with a spare $10 tip. To see more detailed photos Go to my Facebook Page: facebook.com/sixtyfiveford/posts/pfbid0sBRiNgNn5maGLnmvuf7fRcErhwpkjekEHo5YaoY3TXiY2WRMiWTSu1sS7F6GgBNVl

Mate, thanks for doing this mod as I was worried about scratching the mags on my wife’s car! I’d never live it down! Kudos to you from Australia!

After trying different DIY tire changing bars for motorcycle tires, tubed and tubeless, I came across your version of the mojolever. Without question, this is the best solution and much cheaper than a mojolever. I love the bearings. Thanks for sharing your design. I have changed four tires so far and the bar works great. The Nomar end is OK but the link you provided is for the mounting end of the Nomar bar. I cut a couple of flats on the tip so it is narrower the get it between the tire and rim. Insert, rotate the bar 90 degrees and it works the same.

Boy, that's works smooth. It looks like it cuts down 50% of the resistance! Great idea and great job!

I appreciate your ingenuity! I have a manual tire changer coming in the mail soon and definitely don't want to mar up the wheels for my drift car. Thanks for sharing the idea/ knowledge! Great design!

sff, great video as always. I wish i had even one percent of your ingenuity and ability. so please,never stop making videos. at least i can watch as good as you. lol.

That bearing made that look pretty slick, great idea!

Very clever implementation. No unnecessary music. Simple explanations where useful. I reckon I can make one ( including the support, in the time i'll save on its first use. A brilliant video, thank you.

You're a super smart fabricator sir and I enjoyed watching you work and make your materials work for you. Keep it up.

Man, you have a great channel. Your practical builds and tips are money and time savers.

Another great tip! Thanks! Love the red paint detail! A man after my own heart.

I boght this today and I bent the bar on my first tire but I ended up fishing 8 rim tire swap doesn't have much life left I will probably do what you did thanks for the great video

Well done, a masterpiece. I would make a display case for this and hang it on the wall for those Special Occasions.

Had to give a like purely for the 2 axis vice which I'd never seen before but is now on my list of must have tools and also for the melting of the HDPE. I'd never seen how easy it was to use that. I have all sorts of things that I could do with that.

Good work thumbs up. Most likely been patented by now. I invented the Wheelbarrow with a break. But some years later another person somewhere in USA put patent on it. I still have early documentation showing I was the inventor.

That is excellent work! Very well done. Thanks for the video.

If you don’t want to spend time sandwiching layers of milk jugs you can always buy the dirt cheap HDPE cutting boards at the dollar store. Cut to size and bolt on.

That is awesome. I ended up wrapping the stock bar in kydex. It works but not the best fit. Definitely building one of your bars now.

Holy schnikes Batman you've outdone yourself. I have the same tire changer and this is just off the hook good. Thanks Bud.

Helló! Megcsináltam és remekül működik. Jó kis szerszám :) Köszönöm az ötletet :)

This is awesome. Love my manual tire changer.

love the bearing

Nice! My dad was a lot like you in this regard. I learned that, Necessity breeds ingenuity. We were in the sticks and not a lot of money. So we came up with things like an air compressor from an electric appliance motor and an old ac car compressor on a tank, bench grinder was an electric appliance motor, parts washer etc. Most impressive to me was a sandblasting box from parts. He used a pair of welding gloves sewn to Levi Jeans leg's , and glass from something(maybe plexiglass) as the lid. Get this, his buddy took a VW boxer type engine and made an air compressor for his large garage. Thing is it ran on 2 cylinders and pumped air with the other two?! If my memory serves me correctly. Same guy made a front wheel drive rollback with a front wheel drive Cadillac, truck cab and trailer?! Dude was very intelligent.

nice job, true craftsman, I love to watch these videos, it amazes me how many smart and creative people are out there

Now! That's a definite thumbs up from me! Great work and Thanks for the video.

Seems like a great idea, simple but effective.

Great DIY video! Just what I needed, making one soon! Just bought the same tire changer at Harbor Freight for $32+tax with a 20% off coupon.

Cutting board is what I used for plastic part, that bearings are great idea! Cheers

That's very clever, I got some new hard rubber cruiser motorcycle tires, might have to build one myself. Thanks!

this is the BEST video I've seen because it uses the bearings and plastic creatively to avoid rim damage and make the job easier. Plus you have some fun machining and welding too!!!! I wonder if there is a good no-scuff dismounter rod/ball.

Masterful engineering Moe!

I saw you grab that angle iron after you cut it. Cool to the touch. I recently got a similar low speed chop saw. I bet nobody caught that grab of a cool piece LOL. ....and thanks a million for the Idea. I wish I had your brains.

Jag håller helt med!!!. Ett xy bord är helt underbart!!!!!!!!!

Damn!! Now this is useful, great homemade tool. Going to make one.

Just found your channel several days ago..... Jeez, you're like a modern day- Blacksmith of Royalty (the King's Blacksmith)

Nice job. That tool will pay for itself after one dismount and mount.

The mounting end is awesome! Works great. The demount struggles with trailer tires and straight up fails with anything larger. My truck tire ripped that little Nomar tip right out.

Nice mojo. Good ideas. Bearings are great. Works. And you actual know how. It shows. A+

Thank you for your trick and your experience ! Good vidéo!

You are a freaking genius. now I don’t have to scrap my tire changer

Good idea. That look like it worked pretty good. I liked your oven trick!

Have to replace the tire on my 1998 Manco terminator Gokart. This a great informational video.

Nice work. That's super handy

Love the vid and ingenuity. You can also always source Delrin (super strong slick plastic) from Mcmaster-carr. It comes in sheets rods etc. Same material as the no mar end you used.

Fantastic. Really nice job on that one.

thanks for the video bro. watching from the Philippines

pretty cool, I was gonna try and buy one, shoot Ill just make it. Appreciate you list out the parts, totally cool, Nice video!

That is an outstanding idea. very good job. Apply for a patent and make your millions. I will be the first to buy one.

Kickass ....look great man!

Excellent video. Thanks for sharing.

nice build. thanks for sharing.

The Yellowthing tire tool could help you hold the tire lip down when mounting the tire. There are similar things like that, as well.

Great job ! 👍🏻

Good modifications thumbs up!

Great idea! Thanks for the vid.

You've got skilz my man!

You should have been the one designing this machine great job!!!

Very helpfull video. Thank you and have a great weekend!

Another well done job Moe! Enjoyed it as always! Zip~

i'm a cheap bastard, so i made my own tire changer out of scrap steel i had lying around to save the 50 bucks. i've got an old solid axle shaft out of who knows what, that my dad used as a spud bar on the farm that's about 4' long that i am going to make the bar tool from. where the tool meets the rubber was where i was having some issue in my design. this solves my problem perfectly. thanx for the idea!

Now you done it. Now I'm gonna have to make my own.

you can get what's known as an alloy mate bar which has been out for a long time, which uses nylon bolted to a metal bar, you can buy the nylon kit cheap then just make the bar up easy enough, very handy.

Great Video Man.

Very clever idea. Thank you

Great tool, thanks for sharing 👍👍

Great job. Thank you

dang! another channel I have to study, haha...God bless...doug

Thank you!!! I was wondering what plastic to use😎😎

Thanks a bunch. I have come close to throwing my bar. I tore up the edge on a Cooper tire with it. It's not long enough and the end like you use is thick. Some of it has to do with that bead glue they used. Tire cost twice as much as the tire stand and tool.

Thank you so much for your great details video

Yes I need to make one

Very clever, good job!

Good job. Well done mate

Thanks for the video. I've been looking for ideas for something exactly like this or modding the original bar. If I only had the tools to do this, I would basically copy this idea. Since I don't, I will probably buy the MOJO or that other no mar tire tool. Thanks again.

I made a tier changer similar to a rim clamp but just has a hydraulic cilinder to clamp the wheel down in a metal box I welded a large gear to the cilinder and use a eletric motor to turn it on a petal swich used for a drive by wire system for a car I maid the arm out of a square and a circle pipe with a lever to lock the jig in place the only part I have bought was the duck hed and the bar

Nice video great design I’m hooked and subscribed 😁👍

Thanks for the video tutorial. So I found these walker skids made from Teflon, they are curved to 90°and taper on the end I am going to back the skid with a piece of 1"X⅛" flat bar formed to the contour of the skid and weld that to my galvanized pipe, I also going to use ½"ID berings. I will be using the mount\demount bar for changing motorcycle tires.

Great video. I was thinking about building something similar myself. The bearing is very clever, and the technique to melt the HDPE into "putty" is a really neat trick.

Genius idea...Thank You

Excellent Job !!!!

I had seen something similar to this being sold online for doing hot rod tires without scratching the rims. Seems like this would do the trick and probably cheaper or at least funner than buying the online one.

Well THATS a real good idea!

Thanks for the video . What are the chances of you doing this on a HD Rear tire ? Very curious as they are very stiff. Thanks for your time

Greta humilde man! Thanks for sharing.

Great idea I wish whats the name of the parts you order to tray to make one.

GOOD JOB !!!!!, ALWAYS LIKE AND APPRECIATE VERY MUCH THE EFFORT AND PRESENTATIONS YOU MAKE. REGARDS

Nice job.

great idea , thanks for sharing

Did you make something that will help remount the tire better then what comes with the tire changer? Thanks for the upload going to be making one of these.

¡Muy buen trabajo! voy a tratar de hacer ESA PALANCA PARA DESMONTAR NEUMATICOS

That is an outstanding idea.

back in the day when making our tyr bar's. Removers we used old Ball joints welded to the bare-End " Like This" . Drill a tap to fit Ball joint nut screw in , Until tight. then wald the outer pin to the bar a dress to smoth . On the other end het the bar hot , falten & Temper when finish. form a hook to fit the rim brill bar & weld ball to a hook , mount so the Carver of the ball of the joint & valy is mounted. so it can push the tyre beds on to the weal . weld ball stem to flatend bar & hook . smooth to prevent ripping. in my day they wear riveted to bar & drest ro run easey ., so it slides Easy , of tyr ues plenty of sope . This bar was used to fit or remove tyers , uk England . To bay i would weld flat steel hooked steel , To 1" 'steel bar, & round into a carve with a Vealy carve to represent the ball agents the steel flat valley to let the bar . pres on the beed . Given the weldingkit of today & carves a good polishing well forward on the hook . given the wedding kit of today kit. In my Day we hadn't that kit they have to day we were still. welding with gas back then. HA LOL But not today it easily welded & more to the point strong , So just polish . The ends to help lesson damage. & of course for Aluminium plastic Coated kit is the way to go. plastic coated Yes. The ends. I have a bar my dad made back in 1920. it's still changes tyer's as well today in 2020. i don't use it so much but i have seen my grand kid's change tyr's with it , By gum son . try the ball joint mether on the end of a bar. it's a way to use up them old ball joints , we did , back Then. I do Bevel it's gotten better with age , Les England . "THEM WERE THE DAYS SON,

Damn right sixtyfiveford!,I'm building one for myself.cheers!

I've been using Tyrepliers for years. I may have to bodge together one of these.

That's a badass tool

great job!

GREAT JOB WORKED GREAT

excellent work, I have been wondering myself a better way for years. the manual changers are so cheap and handy, and actually faster than a modern auto changer once you know how to use it, but those damn scratches :-(

nice tool 👍

good stuff!