My husband wondered for a long time what I was watching with this young couple in all the snow. Then he decided to sit down and watch with me. Then every Monday and Friday morning he would ask “ Are Trent and Allie on yet?” NOW you have made his dream come true with the TRUCK build. He, in his younger days rebuilt and old old truck and watching you do this is bringing back all kinds of memories. Trent, he is watching you closely so don’t mess up, cause his whole career was working with automobiles, trucks, and anything with a motor. Thanks for making him so very happy.

Ok, I was honestly happy you weren’t going to turn your channel into a truck build. But now I’m over here watching it anyway. 😂. Love you guys!

Note to Allie - please remind Trent to wear safety glasses especially when working under the vehicle ❤️

All of this brought to you by Trent and Allie's incredible success in building a KZfaq channel we followed for years. Their bright, engaging presence made them a magnet both for viewers AND for advertisers who paid for promotion spots during their twice weekly videos. Clearly, they're making a bundle of money to support their lifestyle. I couldn't be happier for them. Honestly, I'd much rather watch what they're up to than ANYTHING offered on television. Have a blast Trent with your toys. I've spent time on my back under cars getting grease in my eyes so I'm enjoying this as well as your garage build. We haven't seen much of your van build company, but I imagine that is another moneymaker for you both. Couldn't happen to better people.

Holly crap. Custom chassis, 4 links, dana 60, atlas transfer case, 42" tires. You better have a ton of free time and a deep checkbook. Best of luck, I'll be following the build.

I was going to give you some grief for not wearing safety glasses when working under the truck. Glad to see you finally remembered to put them on. You've only got one set of eyes Trent and eye injuries are no joke (ask me how I know! lol). Love the build and looking forward to seeing your progression.

Let's see. Full truck buildout, garage living space build, man cave, house additions and I know Trent will do a mechanic organization in the garage. Oh, there is the little man to raise. Good thing Allie will keep Trent focused.

Trent, I just read the Installation Manual for you. Here is what is said: "Use a Ten Weight (ISO AW32) non-foaming, non-detergent hydraulic fluid (i.e. Texaco HD32 or equal). The unit will hold approximately twelve quarts of fluid."

I love that Lika is on her raised bed supervising your work!

Congrats on monetizing within your first week, Trent! Way to go.

❄️You mentioning a lot of things that you’ve never done before but when you’re talking about it you sure seem like you know what you’re doing. I look forward to watching your channel and seeing what you accomplish.

I’m so in love Trent & Alley , Trent’s Garage is icing on the tires🚙

Hi guys I’m a70 year old grandma and I love trents garage as your other channel ❤

You have the correct fluid in the power unit reservoir. Colder weather will make the fluid a little thicker and the lift will run slow.

So glad you and your guy fans have a place to hang out each week, Trent. I am only watching to help with the algorithm. :D In my youth (1970s), I hung out with my dad in his garage. He could fix anything pretty much. He also was the guy in the neighborhood who changed tires for everyone (he made paper as his full-time job). Dad had a tire changer machine and a balancer (the tire would sit on it and he would add weights to the wheel). So fun! The garage was a busy place until one day someone tattled on him and he couldn't do the tires anymore. He was saving the neighbors tons of money!

you should consider wearing safety glasses under the vehicle protect you eyes from falling debris, great new channel Trent.

I dont understand any of it, but i love cars, and you and Allie, so here i am watching your episodes, and enjoying it..

Honestly most of this sounds like Charlie Brown cartoon adult voices..wha wha wha transmission 😂😂 But it looks interesting and I can’t wait to see the finished truck.

Paul at fab rats are awesome people. Anything that needs fabing he's the man to confer with

Really fun to watch and learn. I am cringing however watching you without safety glasses!

I am really glad you set this channel up for the rebuild, absolutely Loving this!

Hiya guys! Congrats on this new channel Trent!!! You need to give your cinematographer a raise!

So you had to show the lift…it is too cool ..My husband now wants one…..sigh….LOL…Trent this is such a good idea…..our group is loving it….I will admit after seeing you plow…hang off ladders ….seeing you standing under that lift as it lifted gave me pause….scaring the hell out of us is your super power….I get that now….😁

The more "issues" (never mistakes) YOU make, the more WE learn! Thank you for being humble, honest and not afraid to show us your vulnerable side.

Love you all. Trent is a young meeee! So I get to go down memorie lane. Instead of working on cars and motors, now I'm driving a Peterbilt and delivering exotic cars for the movie 🎬 industry and celebrities. So you get your hands dirty and I'll watch, remembering all the cuts and scars all over my head and arms lol. Congratulations Trent. And one other thing, you have the absolute best wife and the way she looks at you is beautiful, unconditional love ❤️ Hi Leo😉

What I would do Trent is put a couple of ratchet straps to your ramp out riggers to stop it moving

I waited on Ally to say , Adios, you can't leave that out man. Enjoying the build, keep it up Trent .

I am sure you have seen Paul's channel "Fab Rats", he built a road worthy Toyota and a rock crawler. If you have not seen Paul's channel I would recommend it to you. Anyway, I am sure he could be a great source for answers or solutions while you build. Enjoy your build and it will be fun to watch your progress.

Good going Trent. Watching your excitement, warms my heart. Love Grandma ❣️

Atf definitely and check your flow valve to see if it is blocked

Interesting time warp - Trent's hair fits under the cap 😂 and the garage isn't drywalled

Yes, you should have put ATF in the hoist. I would recommend it gets changed.

I'm in Heaven here with ya Trent I'm 52 and have done a lot of my own engines way back when. This is great.

It's good to see you again.🙃🎈😉😉😉😉🤗🤗🤗🤗🎉🎊🎊🎊🎊

Another way of holding the engine is to put a chain over the beam. If you don't have one now that's big enough, put one in, it will be used a lot.

Like to recommend purchasing three more support poles., ASAP. You may also be able to sell a number of the parts you are taking off the truck. Enjoying the channel. Tks for sharing.

Take the plugs so it can spin if it's petrol. Heating the nut and spraying the bolt with break cleaner will allow 'any' 2 metals come apart because the nut expanders and the threads contract.

Ali girl I praise you. Lol Trent you make me anxious sometimes I swear lol. God you and my husband would be the two gingers in a pod.

I know nothing about this. But here to support, watch, learn and go along for the ride... plus I look forward to Allie's sly comments and giggles. 😆 💜

Looking forward to the frame build. Thx Trent!

Ohh... This is gonna be good. Here for it. Big boy Toy-ota...

Good video Trent, great video work Allie. You guys make the perfect team. Can tell this was made with love ❤️ and respect. Look forward to the next video of Trent’s Garage.

Atf is what we use but being in the cold is probably your main problem.

Hey Trent, back in the 80's I had a. Red, 1982 Toyota 4x4 with 33 inch tires, chrome wheels, dark tinted windows , gold strips, big lift. I loved that truck. I put a license plate on the front, and it said " Toy Time". I cant seem to find my pics of it to show you. But love both your channels. My wife and I cant wait to see you guys weekly. Keep Up the good work !!

It really feels like before starting your project, you need to build some shelves in your garage so that you have some place to put stuff and can keep it orderly. It probably wouldn't take long to do.

If you aren’t gonna use a carrier bearing, I would install a bare block and bare tranny case to “sight-line” back to the center of the pinion. This will minimize stress on the driveline and at the same time adjust the pinion ANGLE by rotating the rear differential

Once you have everything off it sounds like just the cab is left 😊😂🥰😂

The lighting on this video was much better. The content was great too. I just wish it could have been a longer video. Otherwise, I can't wait until the next video. Bring it on baby!

Be fun watching you open stuff. Everything must feel like Christmas lol

Yes you need ATF in the lift also the warmer the fluid the better

I have a thing about big tires: I LOVE THEM! Would those fit on my Subaru? LOL

Trent, your channel is fun to watch! You make it interesting and tell us what you are doing so that it is easier to follow you along! 👍😀

Your energy is awesome

Your right the best thing you could do is pull the cab and bed and junk the rest. If you look in the rear lot of most any Toyota dealer they have a stack of frames. I know a few people that have had them replaced twice.

For a man who can, like Trent, there really are no limits. Go Trent go!!! Trent and Allie's positive persectives are soooo contagious! Congrats on the new channel and your successes. Great editing Allie!!

You are doing such a great job, narrating and explaining everything to us. I am not usually a fan of this type of content, but maybe I was wrong, I love it. In my opinion you're doing a great job.

You might want to do what we do at our shop and ratchet strap the frame down to the lift arms. That will help prevent the truck from lifting off and falling.

Trent the Atlas car lift should use AW32 oil It's the Rotary car lift that use's Dextro III automatic trans fluid hope this help's !!!!

“Matt off Road Recovery” builds recovery vehicles. If you get stuck, Matt can probably help. I’m following. Love your energy. 👍🏽👍🏽

Tent PLEASE WEAR SAFETY Glasses ❤️ 9:46

To me it’s overwhelming, but I have very little car mechanic experience. Good forward to the build. I’ve watched you build your hose and partial garage build.

One of the best pieces of advice my father gave me having loved cars my whole like "if you love it so much - don't turn it into work because you'll end up not enjoying it" protected my passion.

Hehehe Trent as I am watching Trent's Garage for first time, I'm glad you compartmentalized it because as a single senior I enjoy Trent & Allie series BUT I gave it a look/see & not for me! Anyways tho, may I suggest that you get a $3dollar purchase plastic eyewear safety & protection PLEASE PLEASE PLEASE!! To the right audience, I'm sure your blog will be a super fun success! Good Fortune...now I'm back to T&A&Leo&Frank&Lika 🥰💚

Build shelves, a lot of them, in fact, line your garage walls with shelves, as many as you can build and then save all the steal. Knuckles, solid pipe, tube, all the nuts and bolts, buy a chem bath amd clean all of it. buy a plasma welder/cutter. if your prefabbing your gonna want a selection of junk you can cut up, weld up, grind, and have on hand. You might even want to get a second truck you can pull parts from or a completely different car that has things in it that you want to add that the truck doesn't have. Things like fender, which are are sheet metal, sometimes, can be saved just for the pieces you can cut from it. get some chain, and hooks and start hanging things that are lighter from the rafters. Make the space your gonna need.

Trent, I enjoy watching both of your channels. For your lift AW32 is the most commonly used oil & recommended by most MFG's The most common causes for a lift to be going down slow like yours is cables being over tight or a restriction in the HYD system.. In some cases the sceen on the lowering valve will get clogged up with Teflon. That is an easy one to check & resolve. Depending on how cold the oil is that could be a factor however i have only noticed it affecting up speed not down. Keep up the Great WORK!

Loving Trent’s garage❤

Some people talk with their hands, but Trent talks with his whole body….😅Love how he explained how he could slide the whole transfer case back and forth, not only did his hands go, but look again, even his hips go back and forth. I got a real chuckle out of this. Had to watch that part over a few times. 😂 I love Trent’s positive attitude how he will tackle anything! Way to go Trent! Can’t wait to see the end result! 👍🏻

Hey Trent! I have to catch up on your monster truck built videos. I have been watching you and Allie since March 2021 when the pandemic started! I am excited to see you complete this built💜🙏🏽🦋

Howdy Mr Trent I'm here for Trent's garage, love auto work, looks like you're having fun keep it coming. Allie hope your enjoying Trent's happy face. Best to the family.

I’m really looking forward to this Trent This is going to be a fun ride

We worked on many a motor and found a swing set (Heavy duty one) did a great job of holding the engine where it was wanted. We attached a come-along to the engine so it went high or low at just a flip of the come-along switch (heavy-duty come-along as well as a heavy-duty chain). With the swing frame, you can put it wherever you want and even move it yourself. I would put some 4 ply (or 6) plastic under the engine part to keep it from draining oil etc. while moving it around. I thought you were building a rock climber??? So a monster truck haw? Good show.

Living the life for me 😊

Our grandson works with lifts at a garage and they use ATF fluid. It is the best

Love it Trent! Cannot wait to see everything come back together! Great video job Allie!😉

Sweet now the fun begi ns been waiting on the build your in my wheelhouse now so to speak 😆👍

I had a recall for that spare tire holder on my 2002 Tacoma.

You used the proper fluid in the lift; are your cables binding somewhere perhaps? Hydraulic valves could also be blocked. Good luck sorting it out, hopefully it doesn’t take too long.

I think you will see it through as your never fazed by adversity

High School Auto Shop with Mr. Childs...Sign Me Up!

Where’s your high lift fluid catch basin and transmission Jack? Hmmm… nice Miller!

Enjoying the new channel! Thumbs up! Suggestion: SAFETY GLASSES ALWAYS!

Thanks for sharing! It's looking good. God Bless.

Amazing that you can find spare time to work on your fun project Trent! 😂 Great seeing you have something you can work on to de-stress and enjoy. 👍👍🎉🎉🎉🎉🎉🤘🏻🤘🏻 I’m sure once Leo get older he’ll get a kick out of dads building this truck.

Trent get a white board!!! Step by step!

I install below and above ground lifts above's use ATF below's use mineral oil. 👉👉Call out to Heavy D Sparks please help Trent with his build.🤔🤔Tip: Trent use chains and binders or heavy 3" ratchet straps to tie down the frame to all the lift arms and please get the tall transmission lift jack for working by yourself. Don't use straps, ratchet straps, rope, chain falls, or come alongs to lower transmissions and gear boxes. Everyone has tried to use those already and failed BIG time. They won't work.

I know that somebody else has said this but another stand will be very useful. Fox shocks, NICE!! I have them on my RAM!!

love the content. long time T & A follower. definitely recommend strapping that thing to the lift to stop it from tipping when removing parts.

Trend,please wear safety glasses, all it takes is one metal particle penetrate your eye, they are very precious

Much of what you said was like you were speaking Greek to me but I enjoyed every bit of it 😀. Really, I’m excited to see you so excited. I look forward to seeing you, Joel and Allie out using this , this coming year. I’m excited to see the enormous tires on this truck. Happy for you, enjoy every minute of it Trent-Allie you say the things that I would say, 😊 Love you guys

Sure wish you'd wear safety glasses working underneath that rusty old truck. Otherwise great job Trent.

I’m not really into trucks even though I grew up with a gofer, hand me that, hold it still education. 😂 So I know the ins and outs of rebuilds or at least enough to enjoy the process. What I’m really waiting for is Trents adventures while helping those overwhelmed by your snow covered world. Those clips show a bit of heart pumping reality of life in the mountains of Utah. Plus they’re fun for us snowless mid staters. If nothings in the works, maybe just throw a film or two to us to keep our blood pumping 😉

Thanks!

I don't know anything about cars, and really don't know what all the parts are you'retalking about, But I it's your thought process that's so interesting. PS, you're very lucky Allie let's you buy all tool time toys you dreamed about. your own Car Lift...... lucky Man Hope your family is all well Cheers

You two make the best team!!!! ❤️

Love the house build and now to follow along with the truck. I so wish my DH was still with me - he would love to watch this. He was a car guy all around. Hugs and will enjoy both KZfaq’s.

Please put on safety glasses. Just found your truck build videos love it

Na dann viel Freude dran und vollen Erfolg ! Und vergiß nicht vor lauter Begeisterung den Feierabend ! Leo wartet bestimmt immer auf seinen Dad. 😉

I can't wait for the next epp. Awesome undertaking.

Hey my friend, fetch a pretty penny with those their Cadillac converters.lol ✌️❤️❤️✌️

If you DO use ATF, don’t use Ford fluid. It has a detergent in it and may cause premature wear on the lift’s pump