We are building a steel structure as our dream garage! New Premium hats available here www.grindhardp... contact@grindhardplumbingco.com PO BOX 2370 Sandpoint ID 83864
Пікірлер: 1 100
@GrindHardPlumbingCo Жыл бұрын
New PREMIUM hats here! www.grindhardplumbingco.com
@CloudHindlen Жыл бұрын
Jeez Edwin your soundtrack skills are MAD in this video. 😂...
@treya2403 Жыл бұрын
Put a zip line through the shop and out the door to the trees lol so premium
@isaacbourassa8796 Жыл бұрын
What's up with the ruckus in the back
@isaacbourassa8796 Жыл бұрын
Do apoxy floors
@zjrretz Жыл бұрын
I see you also wear puddins fab shop! Love that channel! Thanks for reppin a small channel he deserves it! 0:55
@tommyherbertson8037 Жыл бұрын
as a steel construction manager in germany, I have to admit that this is a litle different than what I know, but as far as I can tell, it should be a really sturdy construction. Way better than all those wooden buildings I have seen in the states. Well done =) However, the safety regulations were not met xD I'm glad you all survived ^^
@mgyb8269 Жыл бұрын
I cringe so many times at the lack of safety measures haha
@TrevorDennis100 Жыл бұрын
Can, and do, OSHA take action based on KZfaq videos? The guys met Paul from FabRats last year, and he had a situation where he was charged with moving a boat that might have some sort of mussel on its hull. That was not safety related, and the official who made the infringement was a jumped up jerk, but it was based on Paul’s KZfaq footage. Either way, I am just glad that no one fell. I fell a similar height onto dirt 15 odd years ago, and broke my back and three ribs, and that has been life changing for me. I can still walk, but I have chronic pain.
@niklaswo Жыл бұрын
These videos are so wholesome to watch. But I have to say, the camera work and editing (including music) on these are just above and beyond. It wouldn’t be the same thing without it. You guys make a great team really complementing each other to create truly epic content! I love it ❤
@JayC133 Жыл бұрын
I completely disagree, editing is jarring and seems intentionally backwards to presumably add minutes to the video. Timelapses show previsiosly seen elements and do nothing to show progression when the progress has ready been showcased.
@CenterLineDesigns Жыл бұрын
@@JayC133I agree as well. The editing isn’t actually very good. It’s all over the place shaky too many frame changes and not actually showing the build. It’s all look here oh wait look here…. It’s too much
@stephenstackhouse1905 Жыл бұрын
The flat head bolt is your overlap bolt. You bolt the pearling Or Gert to the clip this way, you can overlap the pearling And then fold it all together.
@niklaswo Жыл бұрын
I knew there was a reason for those! Thanks for sharing. Precisely the kind of thing I’d miss 😅
@danielphillips882 Жыл бұрын
they are also good for the facing too so when you sheet it or put eve trim on it the bolts don’t hold it ou it can be covered.
@mitchellrobinson9810 Жыл бұрын
Purlin**
@DiscoFang Жыл бұрын
Came looking for the "why". Knew there had to be. Hilarious that Ethan gets all worked up calling the engineers all kinds of names simply because he doesn't know. But assumes he must be right, coz Ethan.
@shoestatus Жыл бұрын
@@DiscoFang In china they call him EChan.
@jasonfuller6527 Жыл бұрын
Will has that curling iron burn on his neck.. 😂
@HansomForster-gx8pj Жыл бұрын
Lmao, that is the first thing I noticed
@NicholsRCGarage Жыл бұрын
@@HansomForster-gx8pj I just assumed "the bear" gave it to him ;)
@bighotrizzle Жыл бұрын
Frozen paintball wound.
@OlShaky Жыл бұрын
"Curling iron burn" looks more like he had a night out with the ladies😂
@goosenotmaverick1156 Жыл бұрын
@@OlShakyi think you missed the sarcasm lol but yeah probably haha. He needs to remind them to leave those where the camera doesn't get to see 😂
@SgtGir10 Жыл бұрын
Osha foaming at the mouth watching homie ride the bucket haha love the content guys
@BradA68 Жыл бұрын
With all the rain / snow coming off the back of that roof , you may want to put in an asphalt or concrete drainage ditch leading into the woods . Too much ground water will seep between the wall and floor making a mess in your " Premium " new shop . Plus the erosion will damage the yard and driveway . Just a suggestion from a long time subscriber who is in the trades . Looking forward to the next video , keep up the good work !!
@101_skeleton6 Жыл бұрын
Yeah I got a building with a waterlogged back wall, inside moisture is so damn high.
@travelin_taco Жыл бұрын
The drone time lapse footage is absolutely premium. More please!
@justinshaw8199 Жыл бұрын
They don't have a drone anymore 😂
@travelin_taco Жыл бұрын
@@justinshaw8199 Edwin will have a new one by tomorrow haha
@therangeguys4189 Жыл бұрын
What drone is he using
@MrGibbie2210 Жыл бұрын
Define the word "Sketchy" ........ Grind Hard Plumbing Co. .......... I love it.
@shanetaggart6060 Жыл бұрын
Being an ironworker I clicked on this so fast lol, I knew you guys were going to put it up yourselves. I wish my job sites were this awesome
@IWjake Жыл бұрын
Fuckin same bro 😂
@monkeytits0 Жыл бұрын
I knew I’d find my people
@bradlepaddle9512 Жыл бұрын
Congratulations y'all have earned this and deserve every bit thank you for the years of awesome content. 🏆👨🏭👨🔧
@jairamragbir437 Жыл бұрын
Pin head thats to help keep thing square.🙏🌴👙🍾🥂🇹🇹
@zweihammerheavyind.2911 Жыл бұрын
I’ve been watching your videos since the first Barbie Mustang, your hard grinding has really paid off! Can’t wait to see what you take on in this much space.
@PennerFab Жыл бұрын
Im more excited about the shop build videos than any of the recent builds lol. Its long overdue and you deserve it!
@lennyross2813 Жыл бұрын
Not stuck with small projects anymore 😃
@Junkpusher77 Жыл бұрын
Love this channel. Glad to see the updates to the shop. Can’t wait to see you guys. Jump off the side of that it’s gonna be amazing.
@robertgonzalez8419 Жыл бұрын
You are the kind of guy when it comes to getting things done there’s no such thing as no or can’t do awesome happy for your growth and the shop. God bless be safe.
@johnmoe28063 ай бұрын
Watching all the hard hats, safety shoes and all the other safety measures you guys are taking makes me proud and my heart very warm. Nothing you guys ever do is without thorough planning and always with safety and security in mind. Just don't die. We want to see more from you guys for many years still.
@TrentonPalmer Жыл бұрын
So rad seeing you guys build your shop at the same time I am building mine! Makes it super fun to watch
@GrindHardPlumbingCo Жыл бұрын
Heck yeah your hangar is looking good!
@CLCIII Жыл бұрын
I couldn't be happier for you guys! Long anticipated and well deserved. The fact that you did all you have done outta that lil shop is really amazing in so many ways! I'm really looking forward to some amazing next level builds coming out of there before long! PREMIUM! As Always, May God Bless you and yours! 😇
@kolechristen Жыл бұрын
Love to see the crew reaping the benefits that you all deserve. Almost time to make the old shop a small air bnb for your subscribers or a sweet museum of the GHPC history.
@forgivenx1947 Жыл бұрын
Man a boom lift would make so much of this build easier and safer
@willo8856 Жыл бұрын
And charge like a wounded Bull
@TorJohan-kj5cr Жыл бұрын
One comment about how stupid they're being for taking that huge of a risk. Good god. People in this comment section are just primed to get themselves injured beyond repair.
@willo8856 Жыл бұрын
@@TorJohan-kj5cr I bet you're a safety officer.
@timbranton7162 Жыл бұрын
Safety 3rd 🤙
@TorJohan-kj5cr Жыл бұрын
@@willo8856 No, just a sane human being valuing life.
@GregVirgoe9 ай бұрын
You guys really need to make a playlist out of this garage build. I was looking for one so I could watch it from start to finish. Loving your videos 🤩👍🏼
@lifewithcl9806 Жыл бұрын
I stumbled across this channel not too long ago and it has become my favorite channel very quickly. I’ve been binge watching. The fabrication and the skill level is insane. Thank you so much for posting this progress, shop is going to be sick!!!!
@ginga-rex5699 Жыл бұрын
You guys should 100% turn the old garage into the podcast room
@pauljohnson4118 Жыл бұрын
It's so you can bolt it before you lap it they are actually awsome to have to you can tie off the rafters with the Perkins and not have to take the bolt back out later when you lap in another one
@larrygardner8292 Жыл бұрын
That drone flight through the bones of the building was premium!!! Great job guys!👍
@GooseGosselin Жыл бұрын
The best part....this shows Grind Hard plans to be around for a good long while. Love you guys, genuinely happy for you.
@harrishayes5120 Жыл бұрын
It’s really starting to look like a workshop, or one huge jump depending on which way you look at it!😂 so glad to see it come to fruition and can’t wait to see the creations that will come out of it.
@samreed5618 Жыл бұрын
I build wood pole barns for a living and watching this one go up was pretty cool! You nailed all the terminology! I was surprised you never broke out a level on your structural beams. But yes you would normally you would run your perlins straight up but with your application it is a little difficult
@AccAkut1987 Жыл бұрын
Didn't Ethan tell in the last episode of this build that he did construction like this for a living before Grind Hard?
@samreed5618 Жыл бұрын
@@AccAkut1987 all because he did it for a living doesn’t mean he can’t use a level! I wasn’t bashing just asking a question
@memorris2 Жыл бұрын
Love seeing the new shop come together! Love seeing a video with minimal will and the word premium.
@bisket2003 Жыл бұрын
Edwin, Ethan, Stephen and Willy - YOU GUYS ROCK!!!!!1 As a LLOOONNNNGGGGGG time GHP fanboy, I have watched you guys come a long way. So stoked to watch your growth and see all your badass life dreams coming true. This new shop will be a GAME CHANGER!!!!
@CarDreamer8 Жыл бұрын
Absolutely love that you guys are building this yourself. It's a dream come true. I would love to work with you guys. Your knowledge is incredible.
@mrajinj661 Жыл бұрын
I just got done watching your Hayabusa snow bike video. Awesome setup. For anyone that knows me, I'll take on 99 percent of challenges on my sleds. When winter comes around , I would love to see a video of the Hayabusa taking on a sixty-degree powder climb.
@michaelsoper3801 Жыл бұрын
good stuff the ultimate grind hard build hope u guys get a lift or 3 .......for the bigger toys. been a fan all along my how its grow keep up the hard work .. thanks you Guys are top of the list entertainment
@markmckeachnie4484 Жыл бұрын
So happy for you guys , can’t wait to see what the future hold for builds in that new shop .😊
@user-yr2zv4ny3x Жыл бұрын
I can’t wait to see it done im happy for you
@brwnjohnnysvage7251 Жыл бұрын
Nice! Bud. Just getting off work! Perfect time to watch the shop go up. Happy weekend bud
@MykeHunts Жыл бұрын
Man this thing is really coming together. Cant wait to see it in use. Ive got 1 concern though. I know that you have graded the ground to direct water away on the back side but yall should definitely still do some kind of French drain to keep water running off the back of the roof from eroding the hill.
@OffroadTakeover8 Жыл бұрын
OSHA would have a heart attack on this one 😂
@leroywood5383 Жыл бұрын
Glad to see you putting up a big shop u guys deserve it. Had a lot of memories in the old one tho
@MrSzero13 Жыл бұрын
premium ~~I LOVE YOUR LOCATION ~~~~ i love your land, i love how the new shop is where it is, kinda built into the hillside, its just all SO MAJESTIC .... i love love you land the trees all of it !! its PERFECT
@brandonpayne1207 Жыл бұрын
As the sun heats a steel beam it will expand in length but also the side of the beam in the sun will expand more than the side in the shade and will arc a little too. So as the day goes on the beams move all around making alignment even more tricky. Man, this looks good. Can't wait till yall move in.
@MichaelSmith-jv7zm Жыл бұрын
Nuts snug not tight until finished and squared an true'd up . Especially when you have pre-punched holes in the siding and roof panels.
@tomc5982 Жыл бұрын
Thinking this is also the reason for the bolts he is talking about not making sense.
@MichaelSmith-jv7zm Жыл бұрын
@@tomc5982 those are for overlapping, so when you put the next piece en there isn't a big bolt head in the way
@chriscoulthard4947 Жыл бұрын
I don't think the drawing made it clear that bolt went in-between the overlap.
@nickb7795 Жыл бұрын
This is so dope, I could literally watch you guys build anything and be entertained
@x_ph1l Жыл бұрын
Nooice, new shop coming along! I hope you'll polish or paint floor with an epoxy or urethane-based paint, so it doesn't generate dust.
@CMPLT_PLYZ Жыл бұрын
The new Grind Hard HQ is gunna be LIT!!! So happy for you guys love that I got to watch the journey here. You guys are great and deserve the best!
@kalathos0042 Жыл бұрын
I'm excited to see when you guys get to the mechanical section of your shop. I'm curious if you are going to do more than just the in floor heating. I'm nothing more than an arm chair mechanic but when it comes to building mechanical systems I know a lot more about it as I'm a mechanical engineer for commercial buildings by trade.
@906MediaProductions Жыл бұрын
I run only in floor heat in the UP of MI and it's more than enough for my 40x50, I've considered adding an overhead infrared tube to melt cars off quicker. It's awesome because the floor dries up quickly.
@kalathos0042 Жыл бұрын
@@906MediaProductions First of all, Michigan Represent! right on Lake Michigan in the lower peninsula myself. Second, In floor heat is awesome for vehicle garages, and tube heaters are a great addition. Is it a propane/Natural Gas boiler or wood fired heater? with how much wood Ethan cuts it wouldn't surprise me if they go with a wood fired boiler for there new shop.
@906MediaProductions Жыл бұрын
@@kalathos0042 propane for now, but looking into a clean waste oil burner to offset it. Wood is nice for the cost if you have the land, but it's awful when you need to constantly feed it, someone always has to be around to feed the boiler. Wood with a gas backup is great though, any wood you burn just offsets the gas used.
@kalathos0042 Жыл бұрын
@@906MediaProductions 100% get that, growing up my parents heated with wood. they had a propane furnace but would never really use it unless we were gone for some reason and couldn't keep feeding the wood stove. and yes, it is cheap to feed but there is a lot of labor involved. i remember spending most of the summers just cutting, splitting and stacking wood for the winters.
@larrydavidson3402 Жыл бұрын
That will be a great shop and you guys sure deserve to have one.
@skyjaccer Жыл бұрын
As far as the flat head bolt thing, it's an OSHA requirement for why it has to be like that. Basically so that the girt/purlin is attached to something while lining up the other member and can't slide off.
@dadadadankable Жыл бұрын
The one pan head is to secure the first purlin to the plate. Then the overlapping purling on top of that with regular type bolts. At least on the roof. I've help build a lot of Mueller buildings which are basically the same and that's how the prints were. We made the same mistake you were griping about arounf 25 minutes.
@Megs2022 Жыл бұрын
great job can wait to see it finished!!
@houlej19 Жыл бұрын
Kids, don’t try this at home or work when you’re older. A gust of wind or your colleagues’ lack of experience could kill you if you’re not wearing a harness. Safety measures exist for a good reason.
@aaronorr5586 Жыл бұрын
Time to do some sketchy sh*t, do da, do da....
@WowCreativeUsername Жыл бұрын
But then they won't look "manly" or whatever reason they have for not just renting a scissor.
@amatureskater15 Жыл бұрын
@@WowCreativeUsername oh shut up lol
@amatureskater15 Жыл бұрын
Kids, take risks and don't listen too this coward. life is meant to be lived and "safety" should never be the first thought in your mind. OHSA is hated for a reason.
@fnsfabrications6844 Жыл бұрын
As the old man that still. Does 💯 of the bad naughty not safe methods every single day, I will say the following: don't use hydraulics as scaffolding UNTIL you have seen a bucket drop to the ground from a random hose failure. Don't climb on upright single beams UNTIL you've seen them fall over like pixie sticks and smash everything. Steel toed leather work boots everyday all the time. But of course you should experience welding splatter burns on the top of your sneaker feet or hot cutoff torch parts melting through the bottom of your Crocs. Totally worth it. Safety glasses fog up, but so does your vision when the metal shavings get in there. It's fine.
@kolbyflathers9892 Жыл бұрын
OSHA doesn’t approve! Lol
@KING_PHILLIP Жыл бұрын
God this is quickly becoming one of my all time favorite KZfaq channels. The music, the vibe, the personality, even the silly jokes and puns. This whole thing is just so cool- and this coming from a nobody of a mechanic and an absolute failure of an engineer. As a content creator and media consultant I cannot wait to meet you all~✌️😘
@MattHostetler-uj8ji Жыл бұрын
You dont have any vids but yes you will meet me soon im bout to become famous
@MattHostetler-uj8ji Жыл бұрын
The shop looks great!!!
@KenzertYT Жыл бұрын
I feel like for every pound of work, Ethan gets the affect of one cup of coffee. I've never seen someone GAIN energy from having physical and mental labor but Ethan is someone who does!!
@goosenotmaverick1156 Жыл бұрын
That dude is powered by something beyond our understanding lol he's an absolute legend.
@mr_mongo7228 Жыл бұрын
Looks great gentlemen I really can’t wait to see the finished product! Y’all are definitely a OSHA inspectors worst nightmare that’s for sure 😂
@Potz4pizza Жыл бұрын
Most impressed by all the non-regulation climbing.
@Fix_It_Again_Tony Жыл бұрын
They stuff over the slab was a bit sketchy. Not sure I would have done that, but I'm about ten years older than these guys.
@Potz4pizza Жыл бұрын
@@Fix_It_Again_Tony Yep, my sense of mortality only kicked in by my mid 30's 😂
@MDW893 Жыл бұрын
Imagine just hiring a cherry picker and not risking your life putting a roof on
@fredflinstone985 Жыл бұрын
Watching them tighten the bolts as they went, I winced,,,, watching them struggle with bolt holes and squaring later, I laughed 😂
@goosenotmaverick1156 Жыл бұрын
Right? Of all people they should know you don't tighten anything all the way til they're all in lol
@shreksparty4560 Жыл бұрын
Been waiting for this bangerr love u guys keep it up!
@user-hm4ex7ql3r Жыл бұрын
Ethan is the ultimate OG, if he can’t do it at that moment he WILL figure it out. Enough said.
@zigzag_6 Жыл бұрын
Who else has been waiting for this part 2?
@TsiRoadkill Жыл бұрын
Osha has entered the chat
@ratchetss Жыл бұрын
I mean, how expensive is it really to rent a scissor lift and just not do all those sketchy acrobatics
@chestercalloway3812 Жыл бұрын
Not much. Amateurs are cheap and irresponsible.
@jimmyhughes5392 Жыл бұрын
reminds me of the good old days before health and safety existed watching this, keep up the good work men.
@HolyScendron Жыл бұрын
Had me sweating when they were walking perlins up to the end
@eedesign878 Жыл бұрын
I got 99 problems but safety aint one. Renting a lift or two was apparently too hard. Day one of erection could have been the last day with erection. Any fall from the heights and all the rest of the episodes will be building wheelchairs or tombstones. Play stupid games, win stupid prices.
@UmmmmmmmWhat Жыл бұрын
Can't wait to see the builds you can achieve with actual space to do things 😂
@25Mike87 Жыл бұрын
Come with me and you'll see a world of osha violations
@mumblez22 Жыл бұрын
ppl too lazy to hit that LIKE button I see. 539 views and only 100 likes? And I know these guys put out the best content so it's not on them!
@MichaelSmith-jv7zm Жыл бұрын
True and I watch on my TV through my Roku and sometimes the like button does not register, also can't leave comments on Roku. so I go on my phone like and at least leave a comment. Even if it's just "comment"
@KING_PHILLIP Жыл бұрын
@@MichaelSmith-jv7zmdo it for the algo~👉😚👉
@sideburnie Жыл бұрын
just pausing to say i'm really impressed that y'all put up the frame without a scissor lift or a telehandler. kinda bonkers. also, in other news, the Electric Cycle Rider guy called the Stark Varg "Premium"
@DarronBirgenheier Жыл бұрын
What a fantastic shop! I'm now 100% on board with the idea of a shed roof for my own dream shop, to be facing South, and entirely covered with PV panels...
@TrippyTrev45 Жыл бұрын
Nice exciting times ahead for Grindhard Plumbing Co
@chromasux2 Жыл бұрын
The filming and editing is top notch. It's good to see y'all building the shop yourselves, as it saves money and means more when you do it yourself. However watching y'all trust the excavator bucket and skidsteer pole to stand on makes my back shiver. So much could have been done from a trailered boom lift safely. One hiccup or slip and someone wouldn't be making much content for a few months. That being said, looking forward to the finished shop! It'll be Premium Plus.
@nicsminibikes Жыл бұрын
The new shop is coming right along! Thats awesome!
@loganmoeller7374 Жыл бұрын
good to see someone of a bigger channel wearing another small chanels merch
@ralphbuschman3364 Жыл бұрын
Amazing progress with number of guys on the job.
@dickdegraaff5452 Жыл бұрын
Hi guys, The construction you’ve made up till now will bring you absolutely to a wonderful shop so I wish you lots of success with finishing this job and send you love from the Netherlands
@danmor44 Жыл бұрын
Y’all are legends!! Keep up the great work! Got my shirts the other day too…they fit “PREMIUM”!!
@culturebreath369 Жыл бұрын
Awesome to see you guys finally have some covered space for projects! 🎉
@richardstinnett7796 Жыл бұрын
so proud that we are fellow idahoens. you inspire us all. been watching for manyyears now glad to see the new shop going up.wish i was closer to help
@johnbanghart1616 Жыл бұрын
The flat heads are there to hold to fasten the gurt then you next piece overlaps and gets 3 normal bolts also most building only take 2 bolts in the perlin clips
@kennynelson2269 Жыл бұрын
Definitely shows hard work pays off guys.. great job!
@mrstudiodaddy Жыл бұрын
0:41 Great way to rep Puddins Fab Shop!!! I love his channel! That guy needs more love!
@davidoliver2826 Жыл бұрын
This is going to be epic! Cant wait to see what builds come out of it! It’s funny how most people building a building talk about the jobs it will help with and you guys talk about how you can hang ropes and use it as a snow ramp. Love it!
@42Oregon Жыл бұрын
YeeeewwwP!!!! So stoked to see the shop build!
@RageAgainstTheMachine. Жыл бұрын
Kiwi New Zealand, awesome work guys , nice to see all the concrete went off well. Super impressive all the steel work, good rake so snow slides off easy, yeah. Great job. Congratz Cheers gentlemen🥰
@comesaillard8797 Жыл бұрын
Yeaaaaah can't wait to see it finished 😍
@georgealexanderp Жыл бұрын
All of the build channels I watch are building new shops right now. But you guys are the only ones actually doing their own building.
@davidblanck4131 Жыл бұрын
Edwin, please make a track from the sounds of the building. I miss some of the old tracks. We need new ones lol. I'm so stoked for this building.
@jordansvc Жыл бұрын
Putting the limo in there really puts it into perspective how big the garage is! That's gonna be awesome for your projects!
@Dog_with_thumbs Жыл бұрын
I can assure, you as an Ironworker; they are indeed spud wrenches and bull pins for structural :)
@mikedavis6566 Жыл бұрын
Greetings from Texas! Blazing sun?? It's 106 in the shade here today. And you are getting rain?? We wont see rain again until hunting season. Love the shop, will keep you warm in the winter with the half buried back wall. Cant wait to see what yall get up to in it. Be safe.
@gregprice723 Жыл бұрын
OHSA is rock hard watching this video. Glad to see the progress!
@victorefternamn8238 Жыл бұрын
Dude Will is just living his best life, love the guy
@deviousd1871 Жыл бұрын
Watching you guys having to bolt everything together made me think of one thing. Use Huck bolts. All the rage semi tractor truck & trailer assemblies. Much faster and much stronger and consistent clamping forces. Also will come in handy for your future builds! Milwaukee 2261-20.
@j.ozborne5374 Жыл бұрын
You guys are awesome! Keep up the "Premium" work
@glenstover8748 Жыл бұрын
So glad yall are finally getting a shop.. but it should be a 100 x 120.. you have that filled up in no time.. can never build a shop too big
@CodyRPierce Жыл бұрын
Will having the puddins fab shop Hoodie made my day. I love seeing channels I like supporting other channels I like
@shaharsdechen2537 Жыл бұрын
so happy for you guys!!!!
@deblandrebeats48 Жыл бұрын
So good to see how happy Ethan gets cracking jokes every 10 seconds like a kid before Christmas but he’s the one making it happen he deserves every bit of this I’m so happy for you