Building DIY WOOD COUNTERTOPS from PLYWOOD & LAMINATE for $300 // Kitchen Remodel Pt. 2

Рет қаралды 945,455

4 жыл бұрын

Learn how to build DIY kitchen countertops from plywood and laminate for less than $300! This is the second video in my DIY kitchen remodel series : • DIY Kitchen Remodel Se... ! Thanks to Lowe's for sponsoring this series : www.lowes.com?cm_mmc=inf-_-c-_-prd-_-kab-_-hdy-_-craf-_-yt-_-qon-_-how-_-kit030920 #sponsored
📦 Materials Used On The Cabinet Installation (affiliate):
¾" Plywood : www.lowes.com/pd/Top-Choice-B...
Laminate : www.lowes.com/pd/Wilsonart-Hi...
Contact Cement : www.lowes.com/pd/DAP-Weldwood...
2 ½" Deck Screws : www.lowes.com/pd/1-lb-9-x-2-5...
Construction Adhesive : www.lowes.com/pd/Gorilla-Whit...
Spar Urethane : www.lowes.com/pd/Minwax-Helms...
Sink : www.lowes.com/pd/KOHLER-Vault...
Faucet : www.lowes.com/pd/Delta-Essa-T...
Disposal : www.lowes.com/pd/InSinkErator...
Disposal Switch : www.lowes.com/pd/InSinkErator...
🛠 Tools Used On The Cabinet Installation (affiliate):
Track Saw : www.lowes.com/pd/DEWALT-6-1-2...
Drill/Impact Driver : www.lowes.com/pd/DEWALT-2-Too...
Trim Router : www.lowes.com/pd/DEWALT-1-25-...
Reciprocating Saw : www.lowes.com/pd/DEWALT-20-Vo...
Level : www.lowes.com/pd/Johnson-Leve...
Pull Saw : www.lowes.com/pd/IRWIN-Marple...
Miter Saw : www.lowes.com/pd/DEWALT-12-in...
Brad Nailer : www.lowes.com/pd/CRAFTSMAN-V2...
Table Saw : www.lowes.com/pd/DEWALT-10-in...
Clamps : www.lowes.com/pd/Jorgensen-4-...
Kreg Mini Jig : www.lowes.com/pd/Kreg-Mini-Ji...
Pressure Roller : www.lowes.com/pd/Marshalltown...
🍳Samsung Appliances :
Microwave Wall Oven Combo : low.es/3bgph1M
Range Hood : low.es/3ab4U64
Induction Cooktop : low.es/2wrPKe5
Dishwasher : low.es/2U6JUYH
👕 Get your Build It Yourself merch! bit.ly/BuildItYourselfMerch
📹 SUBSCRIBE : goo.gl/V5gcNJ
💰 SUPPORT ME : / @craftedworkshop
📲 FOLLOW CRAFTED WORKSHOP!
INSTAGRAM: / craftedworkshop
FACEBOOK: / craftedworkshop
TWITTER: / craftedworkshop
PINTEREST: / craftedworkshop

Пікірлер: 392

@TheRaven078 4 жыл бұрын

The most surprising thing for me in this video was you being able to actually find a Lowes associate available in your store to cut wood on the panel saw.

@guitarman3100 4 жыл бұрын

Been working in a laminate counter top and cabinet shop for the last two years, haven't seen this done before. Very cool.

@gabrieleg6384 4 жыл бұрын

Awesome job! I love all of it in this kitchen. A tip for you:

@denniss1618 4 жыл бұрын

Gorgeous!!👍👍👍 Thanks for sharing really really like the top (and I'm happy you had to took the other top 😅). For sink installation a plumber told me a trick. If you chalk the sink fill it halfway up and let it in there for 24 hrs until the chalk is hardened so you get a perfect press fit around the sink.

@VondaInWonderland 3 жыл бұрын

I learned way more than expected! I would have just tried to put it on without the spacers, and wound up crying. I have new wood for under the sink, I'm definitely going plastic! Thank you so much ♥

@Chewy-Da-Redneck 3 жыл бұрын

Great video. I've been doing laminate countertops and much more, for over 30yrs... Fyi: what i have found to use as a separation of laminate & plywood - VINYL BLINDS. They are fairly thin, but thick enough to give you the separation.. And they're easy to clean.

@mattgrommesh4125 2 жыл бұрын

Really cool. There are a lot of little details I really like with your videos. The older I get the less intimidating these projects are. Looking forward to getting started on my own kitchen!

@reforzar 4 жыл бұрын

Dang. I really liked the matte laminate. Everything is turning out awesome! That sink is mint.

@JjrShabadoo 3 жыл бұрын

Great video, Johnny! Countertops look great! You definitely want to elevate that loop of corrugated dishwasher drain line above the connection to your disposal. Otherwise, you’ll have dirty water just sitting in that section.

@BigHeinen 4 жыл бұрын

Nice job with the laminate sir! Another old trick and alternative to the dowels or extension cords to keep the glued laminate from touching the glued plywood top is to use old metal or plastic Venetian blinds strips. They stack easily in the tool chest and can be re-used for years. Cheers!

@elijahvertsehovski7020 2 жыл бұрын

Awesome video. Great tips.. plus I'll be completely remodeling our kitchen. This countertop can save me some money. Also thanks for keeping all the mistakes that you did. Its awesome to see that you can deal with anything, just gotta be patient with yourself! And none of us perfect 👌

@calditos333 3 жыл бұрын

I like how you showed us even your mistakes.

@mikesparks3398 4 жыл бұрын

i appreciate the fact that you show when you screw up!

@ladykenja2700 3 жыл бұрын

- What a great job ! ! ! Your skills are evident & nice to watch. Thanx.

@MrBez007 4 жыл бұрын

Worktops look really cool and modern, great job. Real high end kitchens in Europe often have exposed birch ply.

@ladykenja2700 3 жыл бұрын

- Lots of work that ended in a 'great' project to learn from. Thanx 4 sharing.

@stevelegion 4 жыл бұрын

Hey Johnny. Dude, I love your channel and I love your projects because you’re the most realistic and practical DYIer. Other guys with a dyi channel are using these machines that cost thousands of dollars and they need a huge studio to house them and/ or make these crazy modifications and use techniques that trained carpenters have a hard time perfecting. Your projects are always fantastic, actually doable for a novice or pro DYIer. I hope you and your family are well during these crazy times. Going to try this project myself as I want to make my own garage bar... maybe an idea for a future video ? Thanks a lot Jonny.