BUILDING drawers for your CANOPY | The Charger Drawer you NEED

Рет қаралды 28,098

Жыл бұрын

In this video we’ll be making a charger drawer from scratch which forms a part of a drawer set for my canopy fitout. The drawer set will be constructed from aluminium and is also going to contain a regular drawer and a fridge/freezer. This video will take you through the cutting, the folding, the welding, the assembly and finally the overall design.
Drawer Handles: lcs4x4.com.au/shop/canopy-acc...
More frequent updates on Instagram: @designedandbuiltofficial
Channel Sponsors:
- Kincrome
- barratheworld.com
- Raceworks
- www.lcs4x4.com.au
Get I Believe In A Thing Called Love by The Darkness and over 1M + mainstream tracks here go.lickd.co/Music
License ID: wr1XWv5yVRz

Пікірлер: 57

@northpeak4x4 Жыл бұрын

That latch handle on the slides is awesome. I will need to remember that. The whole setup is awesome.

@AndrewPocko Жыл бұрын

If you don’t need the full deep in the charger draw you could make a pull out table that goes underneath it. It would only reduce the depth by about 50mm and it would give you heaps more work area.

@DesignedandBuilt Жыл бұрын

Great idea Andrew. V2 perhaps!

@MattysWorkshop Жыл бұрын

Gday, I think this is a top setup, the charger draw with the cable tray is brilliant, I wish I could use cad better and be able to design like this, me and fusion are slowly become like each other, great job as always mate, cheers

@Seshonium Жыл бұрын

A lot of thought goes into these designs and it really shines through in the end product. Love seeing the build progress and look forward to the revised editions and final product!

@DesignedandBuilt Жыл бұрын

Thank you :)

@brianharc6511 Жыл бұрын

Love your design and construction videos, always learning from you, the post construction reviews are honest

@DesignedandBuilt Жыл бұрын

Cheers Brian!

@Karakaboardriders Жыл бұрын

Totally agree love your honesty refreshing that you show your mistakes as well as the things you got right 👍

@pilchard2000 Жыл бұрын

One of the best design , construction , assembly 4x4 vids on you tube , one of the worst soundtrack songs I have ever heard 😂🤙

@DesignedandBuilt Жыл бұрын

Cheers Rodney, haha not copping that. It’s an absolute cracker of a track. If I put on Beethoven to please you then I would have 100 comments saying it was the worst!

@domk8371 Жыл бұрын

So keen for this 🤘

@cyclemoto8744 Жыл бұрын

Great job! Thanks for the content, cheers

@arffadailey8055 Жыл бұрын

Excellent job.

@fionnbanks-gorton861 Жыл бұрын

That is freakin unbelievable man, well done!! Makes me want to up my inventor skills again!

@DesignedandBuilt Жыл бұрын

Thanks Fionn, get stuck into it!

@kelvingorey4830 Жыл бұрын

Would be good to see abit more on the 3d design Like a cad tutorial

@87xfute Жыл бұрын

Well done Richard, it's all a learning curve mate. Seeya Rob

@nickunw Жыл бұрын

Good wrap up at the end. Good to hear that even the pro’s make mistakes

@reddo84 Жыл бұрын

tidy work . Good luck Jim

@richardwalsh5570 Жыл бұрын

Mint 👌👏

@Rcbunker11 Жыл бұрын

Hi Richard, love the video and clear description of how you built your drawers, just an idea for version 2.0 you could put a 15mm fold in in the top edge of the drawers to remove the need for pinch weld and also ad strength to stop the potential Bowing of the drawers sides. Keen to see the kitchen setup in the next vid

@DesignedandBuilt Жыл бұрын

Thank your definitely an option yep! Would be interested to trial it out and see which is better for use.

@stacytessier7909 Жыл бұрын

Love the rig ! All the content vids are getting much better. Cheers from Canada😊

@DesignedandBuilt Жыл бұрын

Thank you!

@briandp9535 Жыл бұрын

Hot damn. Neat mate

@MHP47 Жыл бұрын

Great work as usual, looks awesome mate. Looking forward to the kitchen setup

@DesignedandBuilt Жыл бұрын

Thank you!

@MHP47 Жыл бұрын

Not sure if you've mentioned it before and I've missed it, but what drone do you have? The footage it shoots looks great

@DesignedandBuilt Жыл бұрын

Was using a Mavic pro 1 for the cape trip but have recently upgraded to the mini 3 and haven’t looked back!

@MHP47 Жыл бұрын

Cheers mate

@TorqHub Жыл бұрын

Nice work mate, for someone self taught with Ali TIG you're killin it. Stripper disc is a good step for prep, then acetone, Acetone, ACETONE! good wipe with a lint free cloth and let it evaporate, then go for gold!

@DesignedandBuilt Жыл бұрын

Thanks mate!!

@math669 Жыл бұрын

Definitely would look at a slide out table under that charging draw it looked like there was enough room to still fit all the gear plus the table

@DesignedandBuilt Жыл бұрын

Absolutely, great idea!

@laurentc.8952 Жыл бұрын

nice to see the time laps camera is not turning and shaking around now.😁 Great JOB and super welding work !

@DesignedandBuilt Жыл бұрын

Cheers Laurent!

@user-md7go8uj4r Жыл бұрын

Hi love your work great job! What CAD program do you use for designing?

@Nicholaswilms17 Жыл бұрын

What cad do u use and is it for free 👍👍❤️❤️🍺🍺 love the build

@nickunw Жыл бұрын

What a tune! Throwback

@johnpulei7916 Жыл бұрын

Thought you'd consider the rear Tyre and Jerry can hangover. Might create extra weight since your adding draws and things into the canopy.

@DesignedandBuilt Жыл бұрын

Nowhere else to put them!

@kanemosedale3220 Жыл бұрын

Hi mate awesome canopy build what cad software do you use

@bradyhartt Жыл бұрын

top work mate, have even more respect for you and the build now after starting to learn cad. out of interest, do you run a foot pedal on your tig?

@DesignedandBuilt Жыл бұрын

Thanks Brady! I learnt with a foot pedal but can weld without it now. I still weld most aluminium with it if it’s on my weld table, if it’s hard to get to I just run the hand control!

@dbayboyds409 3 ай бұрын

Now that you’re 10months post build I would love an update. I’m looking at doing something similar but wondering how you have solved the movement/risk of damage while underway. Also if you have made provision for cooling. I know my drone gets pretty warm while charging.

@DesignedandBuilt 3 ай бұрын

Hey mate, no dramas after 10 months! Working like a charm. Not much I would change apart from possibly making it a little more organised in there.

@michaelnoyes4817 Жыл бұрын

Sweet as

@HowdidIgethere-so2cr Жыл бұрын

Awesome work mate very clean. Where are the 12v points from if you dont mind me asking.

@DesignedandBuilt Жыл бұрын

Thank you! EBay!

@A-EfarmsTV Жыл бұрын

What 3d scanner do you use or recommend please

@gregshaw4280 Жыл бұрын

Well done on your design, what is the foam that is used in tool draws for placement of tools. Could that be used to position your devices?

@DesignedandBuilt Жыл бұрын

Cheers Greg and absolutely. Foam or 3d print are both great options.

@putz35 Жыл бұрын

Hey mate what software do you design in ?

@photografiq_presents Жыл бұрын

Never ceases to amaze me how much gear a person that owns cameras professes to need compared to photographers and videographers

@DesignedandBuilt Жыл бұрын

Haha 🤷🏻‍♂️

@Karakaboardriders Жыл бұрын

Having been a chippy for 20 plus years and having had so many tool box layouts. Its not intiy you use them forna while that you learn what you like and don't like. But looks like you have put a heap of thought into these. And your at least not working with 18mm ply and a skillsaw😂