Building Hemi Predator 212cc (Stage 2)!!

Рет қаралды 38,871

Жыл бұрын

Instagram: minibikehub
TikTok: thatone_ssr
Appreciate all of you leave feedback in the comments below hope this video was informational❤️👊🏼
Music~~~~~~~~~~~~~~~~
Engine by infraction:

Пікірлер: 109

@EverythingEngines 10 ай бұрын

VALVE LASH .003 not .030 sorry guys my bad

@z1berzerker 4 ай бұрын

Caught that too... he did show .003 feeler gauge. Gotta pay attention to every detail 🎉

@user-rl3ms5wk9h 4 ай бұрын

Its really awesome seeing that you can do this in your garage with limited knowledge and limited tools. great video.

@EverythingEngines 4 ай бұрын

Thank you just KZfaq and tools and 😂❤️

@Jakecannom Жыл бұрын

excellent video !!its great to see young men doing the same types of work i did when i was that age , keep up the great work !!

@1crazypj Жыл бұрын

me too, since I was 11 in the late 1960's 😁

@DFiantFigure Жыл бұрын

I got that same 24v kobalt impact. I love mine. I got the set with all the other tools that come with it. Couldn’t be happier.

@EverythingEngines Жыл бұрын

Yeah works very well

@johnnieb15 Жыл бұрын

Great detailed video, watching this has made me more confident to rebuild mine 🤙🏽🤙🏽

@EverythingEngines Жыл бұрын

Thanks glad I could help you 🙏🏼

@montiel33b Жыл бұрын

Pure motivation!!!Thank you

@EverythingEngines Жыл бұрын

Ofc man

@caleballen2458 Жыл бұрын

Great video bro exactly the tutorial I needed to help out with my minibike 🤙

@EverythingEngines Жыл бұрын

Glad I could help someone!❤️

@thatcobradude4496 9 ай бұрын

thank you man. i was able to do this all thanks to your video

@EverythingEngines 9 ай бұрын

Of course man glad I could help someone ❤️

@DustinTBrowne 5 ай бұрын

Great job bro

@craigpierce7996 11 ай бұрын

Brake cleaner... Good stuff...

@54inches Жыл бұрын

Good Job young man!

@EverythingEngines Жыл бұрын

👍🏼

@alexytgaming4543 Жыл бұрын

I like how you guys say what to do though out the video that’s very good bro

@EverythingEngines Жыл бұрын

Thanks appreciate it🔥

@alexytgaming4543 Жыл бұрын

@@EverythingEngines you’re welcome

@kaidenmartin5798 Жыл бұрын

W⚙️😈

@alexytgaming4543 Жыл бұрын

Yessir🔥

@Omgvon 2 ай бұрын

w vid buddy

@mikesbarn1858 9 ай бұрын

2 suggestions. 1 lap your valves for insurance. 2 mill your head for compression. You can safely remove.00050. Your factory gasket is 40 for comparison.

@EverythingEngines 9 ай бұрын

Thank you I’ll get the gasket situation sorted soon

@chuckhuff7123 3 ай бұрын

Good job bud😅😊

@Jay-fo2so Ай бұрын

Good video buddy! New subscriber here.

@EverythingEngines Ай бұрын

🙏🏼🔥

@emmy10110_ Жыл бұрын

🔥🔥

@mre3120 7 ай бұрын

Good job kid

@EverythingEngines 7 ай бұрын

Thank you man

@advanced1360 Жыл бұрын

I have a predator 212 hemi with a stage two kit 22 pound valve springs and it starts up nice runs great but makes a loud clicking noise by the valves but if it pull start it with ignition off it makes no clicks or knocks inside the engine

@EverythingEngines Жыл бұрын

Probably either valve lash or electrical issue with ignition

@Cereal_Killr 9 ай бұрын

I have a Tillotson 212 stage 2. 24mm Nibbi and been having trouble with a light throttle bog on it. light throttle acceleration I get cuts and hesitation. Full open it rips. Any ideas? What pilot and main you run on your nibbi?

@rudycoronado9656 Жыл бұрын

How did you get you head cover polished like that that what tool did you use ?

@559Minibike_Avil Жыл бұрын

I’m gonna de this exact same build for my next engine but I might go with some champion rockers

@EverythingEngines Жыл бұрын

Yeah that will be sick I noticed a lot more torque and high end power after this build👊🏼❤️

@559Minibike_Avil Жыл бұрын

@@EverythingEngines also gonna go with a flat top piston

@EverythingEngines Жыл бұрын

@@559Minibike_Avil sick also this was my first time building a predator engine and I don’t know if that’s just how hemis are but my stock piston was flat topped😂

@Deucealive75 Жыл бұрын

Every minibike or go kart engine with a non hemi head should have Champion rockers even if the rest of the engine is stock. You just have to make sure there is clearance with the stock rocker cover. I use play dough packed onto the baffle looking for clearance. Some guys just get a taller rocker cover or a spacer to make it easy. These rockers was the very first thing I ordered (From Vegas karts) for both of my builds. Worth every penny compared to the power robbing stock rockers. The only time to use stock style rockers is if you plan to use ratio rockers.

@rideough 11 ай бұрын

This video was great until the 15 minute mark when you GREW A THIRD ARM!!!! Great video dude. It will be on during my rebuild I’m sure.

@EverythingEngines 11 ай бұрын

Love it man😂❤️

@dylanpoucher-eo8pz 11 ай бұрын

I love how u did this and I was wondering how well it does if u have tried it and also if I would do the same upgrade would it be better to upgrade my piston aswell and could u also send me the links for the parts if u can

@EverythingEngines 11 ай бұрын

You could upgrade the piston if you want but the stock piston can handle a lot of rpm and usually aren’t a problem until you start making crazy power and yes I’ve ran it for about 5 months with the added parts and it runs amazing with just a few adjustments with the carb it ran way faster and aggressive add me on snap for the links (yee_boyscoot08)

@aiden5880 7 ай бұрын

@@EverythingEnginesthe stock hemi piston can handle a lot but the non hemi can’t handle near as much

@diamondmeets2259 5 ай бұрын

Did you have to trim a little off the crack for clearance? In many other video they say you need to for the hemi 212 engines. Was thinking about rebuilding mine

@EverythingEngines 5 ай бұрын

No luckily I didn’t have to grind the crank🙏🏼

@arcracing7637 7 ай бұрын

Good video. However I will only say that the torque of the billet flywheel should be 65 Ft/Lbs.

@EverythingEngines 7 ай бұрын

Ok thank you!

@christophermassi341 11 ай бұрын

Young men like this are 1 in a 10,000. Today if you can pry the game controller out of their hands they usually prove to be more trouble than it’s worth.

@EverythingEngines 11 ай бұрын

❤️

@inshallah4280 9 ай бұрын

Personally I wouldn’t have lubed your rod bolts with oil. I would have gone with some red/orange thread lock due to vibration and high rpm

@victorjask8skateordie642 7 ай бұрын

bro amazing video, as a recommendation you should try to talk a little to speak loudly and with more enthusiasm

@EverythingEngines 7 ай бұрын

Thank you bro

@eggrole6804 11 ай бұрын

Recently my 196cc engine blew I’m trying to engine swap would you recommend a predator 212 with the same mods ?

@EverythingEngines 11 ай бұрын

Yeah it runs amazing with a few carb adjustments I’ve done 61 with this motor and the gearing I have and it’s really aggressive!

@fabiotiburzi Жыл бұрын

Why didn't you ported the head? It would make more horsepower

@EverythingEngines Жыл бұрын

Big vid coming soon!

@baconeggandreefs Жыл бұрын

Do you hv to grind down the ears on the crankshaft?

@EverythingEngines Жыл бұрын

I thought I would have to because with the hemis a lot of time you have to grind the crank but I got lucky and had no clearance issues

@baconeggandreefs Жыл бұрын

@@EverythingEngines how did you know or how would you know if you were gonna have a clearance problem ?

@EverythingEngines Жыл бұрын

@@baconeggandreefs I think it just depends on the engine but but install your new cam and bolt on your side cover then turn the crank with your hands and if you feel something hitting or restricting it then you know something is hitting eachother

@baconeggandreefs Жыл бұрын

@@EverythingEngines ahh got ya good to know thanks bro

@joefarmer4465 Жыл бұрын

So, what do I do with the oil I removed?

@EverythingEngines Жыл бұрын

Buy a 5 gallon oil jug and when it fills up you can take it to an auto shop like advance and they will take it

@kirklarson116 10 ай бұрын

Is the valve lash supposed to be 30 thousads or 3 thousands ??

@EverythingEngines 10 ай бұрын

My bad it’s 3 thousandth

@kirklarson116 10 ай бұрын

Just wanted to point that out so you could correct so first timers wouldn't get it wrong. Well presented video!! @@EverythingEngines

@dondada4470 Жыл бұрын

How long did the whole process take?

@EverythingEngines Жыл бұрын

If I didn’t have to set up the camera and film it all it would took probably 3-4 hours

@EverythingEngines Жыл бұрын

But including filming the whole build took me like a day and a half😭

@joebruggman Жыл бұрын

you were saying to use the .03 feeler gauge but actually showed the .003 and .004 which would be 3 and 4 thousandths not 30 and 40.

@EverythingEngines Жыл бұрын

Ik my bad I made a typo

@lamemmb 3 ай бұрын

Do you still have this build?

@EverythingEngines 3 ай бұрын

No I’ve upgraded the head and valve train and pushrods

@racingdreamz8021 2 ай бұрын

So what’s considered stage 3?

@EverythingEngines 2 ай бұрын

I’m not sure actually I think just a bigger head like ported and polished head

@jettsieger2910 4 ай бұрын

Where did you gets the kits from

@EverythingEngines 4 ай бұрын

I ordered all the parts separately but I got them all from gopowersports.com

@jettsieger2910 4 ай бұрын

@@EverythingEngines would this work on a regular 212?

@EverythingEngines 4 ай бұрын

@@jettsieger2910 yes it should if you have problems with clearance on the cam and crankshaft you’ll have to grind it down but there’s yt vids on how to do it

@jettsieger2910 4 ай бұрын

@@EverythingEngines do you know any good parts similar in this video but can fit on a 212

@EverythingEngines 4 ай бұрын

@@jettsieger2910 wym all these parts kinda go together like it’s not recommended to upgrade the cam without upgrading flywheel and rod because they could break and if you don’t use heavier springs then you’ll get valve float and you’ll loose power

@fish_R_stinky69 Жыл бұрын

Why did you put a muffler on it?

@EverythingEngines Жыл бұрын

Cause I was planning on making a dual exhaust but never finished it and without a little bit of noise reduction cops would be here every single day they already get called even with the muffler bc it’s so loud😂

@fish_R_stinky69 Жыл бұрын

@@EverythingEnginesWho called the cops?

@fish_R_stinky69 Жыл бұрын

@@EverythingEngines Sounds like someone is just jealous of you.

@EverythingEngines Жыл бұрын

@@fish_R_stinky69 Chip MF loving💀

@EverythingEngines Жыл бұрын

@@fish_R_stinky69 and probably other old people but he’s the #1 opp

@rockbond4985 Жыл бұрын

The video is okay but the music in the background sucks you want to see the video not hear that music in the background

@EverythingEngines Жыл бұрын

Ik I can’t find any good music without getting a copyright strike

@alexgarvey6448 10 ай бұрын

You gotta learn the difference between 30 thousandths and 3 thousandths 🤣🤣. Literally have two different numbers and you said 30 thousandths for both 🙄 .030 is 30 thou and .003 is 3 thou

@EverythingEngines 10 ай бұрын

I know the difference just made a mistake 😭 my bad