Nice man, I’m looking forward to building some of my own wheels as well.
@camerawithwings86073 жыл бұрын
AWESOME, can't wait for more.
@RVRCloset3 жыл бұрын
Cool, looking forward seeing it when it's done!👍
@GTGREG3 жыл бұрын
Thanks, hoping it comes out somewhat ok for the first one. I know already I'm gonna f-up the handles and leather. 😐
@RVRCloset3 жыл бұрын
@@GTGREG Crossing my fingers!😁
@konjiki240sx6 ай бұрын
Can you share the free joy firmware for this wheel? My wheel came without firmware configured so Windows sees it as a controller with no buttons😅
@debozebever3 жыл бұрын
Nice you are going on the DYI road as well! Started with it a couple of months ago and is is addictive! Good luck!
@GTGREG3 жыл бұрын
Ya man, it's easy to go balls deep really fast 😂
@debozebever3 жыл бұрын
@@GTGREG Ye. before finishing your first project you are already thinking of the next. And so on... And so on
@carterclose74173 жыл бұрын
Will we get an update on this build? Currently looking at purchasing the templates and you are the only video I found related to this project. Thanks! (Love the channel btw)
@jeff3575davison Жыл бұрын
gt3 wheel website not available
@tigim1013 жыл бұрын
Dude I want to build the same exact wheel, might document my build too. Have a bud who has access to a 3d printer so I can get those parts for really low cost
@Skippy-id9yt3 жыл бұрын
Where do you guys all get the proper gt3 or McLaren stickers etc from?, I ha e plenty of wraps orange and carbon fibre ones , but logos from my printer onto sticker sheets looks good but it's not the same , cheers
@gvnthomas2 жыл бұрын
Any sort of updates coming with this? can't see any other videos :-(
@ashley-ford3 жыл бұрын
Hey Greg, did you finally finish this? I'm 3/4 way through this exact build at the moment just about to solder everything up. Would love to know how you got on.
@GTGREG3 жыл бұрын
Nah, not yet.. the iles they sent me were fked and completely wrong so after dripping $200 on the parts that are now paperweights, I decided to bail on the project, I'll finish at some point but kinda irritated with the situation 😂
@ashley-ford3 жыл бұрын
@@GTGREG Ah that sucks man! Yeah let it cool off a bit then come back to it one day. I'm just putting it all together at the moment. I did a test fit and everything seems ok so far. The parts list they provided was a bit sketchy and there are no instructions at all!
@kevinnewman47793 жыл бұрын
Forgot to mention that if you haven’t seen the amstudio channel check it out. They do a lot of diy sim racing stuff: kzfaq.info/love/QS1ZB3BVSrBo3tCs7PyfxQ
@GTGREG3 жыл бұрын
Will check them out now, thanks! 👍🏾
@OhItsThat3 жыл бұрын
I’m excited to see how it turns out. I have the Fanatec Mclaren 650 wheel. It was a great idea for a product but horribly executed.
@GTGREG3 жыл бұрын
Me too! I also have deep love for the fanatec 650s wheel. Mclaren just gets the way it feels in your hand right. I can already tell by holding these handles that this is gonna be a quick favorite.
@deusvainerjuliАй бұрын
What happened to the project?
@ch3m1c3 жыл бұрын
Hey, how's your progress on that project? :) I'm currently in progress off building Turnracing Ferrari 488 DIY wheel.. also semi wireless for Fanatec DD1
@GTGREG3 жыл бұрын
There a long story that ill share in the next video, wasnt a pleasant experience. All the dimensions were off and R Racing sent me a new plate and box after a couple months, it came in late last week., which is kinda shitty.
@Deniz19233 жыл бұрын
How's this project coming along ?
@lifeofasimrigmestizo69102 жыл бұрын
Have you completed this wheel yet?
@Tomte883 жыл бұрын
Nice but what happened with follow up videos?
@GTGREG3 жыл бұрын
project died due to bad CAD file measurements. I scrapped it for now. Will probably finish it in a wired setup and be done with it.
@Tomte883 жыл бұрын
@@GTGREG Ah I understand. Wired setup is the way to go in my opinion. I ordered a Mclaren 720s GT3 wheel from Simline. Will get in 2 weeks, I'm so excited!
@cbrdealer2 жыл бұрын
@@GTGREG Man I was kind of looking forward to seeing how this project played out.
@zenflight2450 Жыл бұрын
So, how far u got ?
@GTGREG Жыл бұрын
kzfaq.info/get/bejne/h9p1Zsp6ubesnqM.html
@PandorusFightStick3 жыл бұрын
hey GT Greg, i can send you details for a company that can make a 5/6mm carbon plate. let me know
@GTGREG3 жыл бұрын
I would love that, I had my plate made by a company in Canada for a decent price but the R Racing file the 720 wasn't tested and I got an email from them saying the dimensions were wrong and I had to start over 😡😡
@chrisjohnson2613 жыл бұрын
Hey bro can you give me the build parts so I can build my own?
@GTGREG3 жыл бұрын
Hey man, here ya go: rracing.store/collections/diy-3d-files/products/r-racing-720s-gt3 these have an open source personal only license so you will need to download from them, they are $19.99 and comes with everything you need (except the parts themselves). Good Luck!
@GTGREG3 жыл бұрын
I hope you didnt buy anything from R Racing, I just got an email stating that the dimensions are wrong and i have to rebuild the BOX and the front plate, Im out $175. STAY AWAY