Building the Boeing 777-9X RC model airliner, Complete build and first flight video

Рет қаралды 3,955,734

5 жыл бұрын

Boeing 777-9X
scale 1/20
wingspan: 3.6 meter
fuselage: 3.8 meter
weight: 22 KG
powered by: x2 120mm EDF from Schübeler: www.schuebeler-jets.de/de/
ESCs: x2 160 amp from Castle: www.castlecreations.com/
Batteries: 12s 6200mah from AGApower: www.aga-power.com
please consider supporting my channel on Patreon:
/ ramyrc
⬇️my affiliate websites⬇️
Banggood.com: ban.ggood.vip/5dd5
amazon.com : amzn.to/2enXYpm
some of the materials were used:
5mm Depron foam, balsa and plywood, 25g and 80g fiberglass, 40min epoxy resin, carbon fiber roods.
Things I use
Soldering Station: www.banggood.com/custlink/K3D...
Soldering Iron: www.banggood.com/custlink/Gv3...
Gauge Measuring tool: www.banggood.com/custlink/G3G...
KST servo: www.banggood.com/custlink/v33...
budget high torque servos: www.banggood.com/custlink/v3m...
Push rods: www.banggood.com/custlink/GmG...
My trusty charger: www.banggood.com/custlink/KDv...
Servo extensions: www.banggood.com/custlink/m3K...
Hinges: goo.gl/FUKuLK / goo.gl/RP9cNh
winglets servos: goo.gl/WG21xa
flaps servos: goo.gl/rkeJa5
some Parts you could use to build your airplane:
90mm EDF bit.ly/2siRONW or amzn.to/2siCDV8
ESC goo.gl/q9bF8y
Servos goo.gl/dzL3mu or bit.ly/2rBmi1a ,, goo.gl/28vhG7
wheels bit.ly/2rgZotb or amzn.to/2qwUBXi
landing gear bit.ly/2rkSsNz
flashing lights bit.ly/2rh1Bot
-LED lights : bit.ly/2l4kA4y or amzn.to/2kT4Teq
-7 channel spektrum receiver: amzn.to/2kDh68F
-spektrum dx7 radio transmitter: amzn.to/2l4rLcP
Other radio transmitters: bit.ly/2kdWk0q / amzn.to/2l019Kk / bit.ly/2ke8k22
-5mm Depron foam: from Flitetest: bit.ly/2kgIhSU or amazon.com amzn.to/2hWb0fg
-10mm carbon fiber roods:amzn.to/2kZQ7op
-vinyl wrapping sticker: amzn.to/2kgsqnF
cool 12v soldering goo.gl/nV54Tm
🎧Music tracks:
1-Vanze - Survive
Music provided by NoCopyrightSounds.
Video Link: • Vanze - Survive (feat....
2-Diviners ft. Harley Bird - Falling
• Diviners ft. Harley Bi...
Music provided by NoCopyrightSounds.
Watch: • Diviners - Falling (fe...
Free Download / Stream: ncs.io/DHBFallingYO
3-Culture Code - Make Me Move (feat. Karra) [Tobu Remix] | NCS Release
Music provided by NoCopyrightSounds.
Watch: • Culture Code - Make Me...
Download/Stream: ncs.io/TobuRemixCr
4- Rameses B - There For You [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Rameses B - There For ...
Download/Stream: ncs.io/ThereForYouCr
5- Halcyon feat. Valentina Franco - Runaway (Culture Code Remix)
Culture Code: / culturecode
Halcyon: / halcyonedm
Free Download / Stream: ncs.io/RunawayYO
Animated subscribe button by: Motion Nations: motionnations.com
📸📹
Main Camera: amzn.to/2vHmVt2
Secondary camera: amzn.to/2Jo3xTR
GoPro: amzn.to/2qUJ1n0
RunCam: amzn.to/2FdvUln
#ramyrc #Boeing777x

Пікірлер: 2 900

@RamyRC 5 жыл бұрын

Sorry guys I had to change some music tracks and reupload the video because the music was claimed by the copyright owners, it's really hard to find some good non copyrighted music these days! enjoy the video.

@parolesdelego 5 жыл бұрын

ok but cant you just use the NCS one? They have great music. LFZ popsicle for example great video you inspire me to build and fly thx

@RamyRC 5 жыл бұрын

I use NCS music all the time

@parolesdelego 5 жыл бұрын

Ok so why do you get copyrighted?

@OuttaSyllabus 5 жыл бұрын

Wow....and I was scared for the last track... it so much syncs :D just love your content... keep it up :D Best wishes

@pilou91974 5 жыл бұрын

Thank you Ramy.

@dean121ifly 5 жыл бұрын

You Sir, are one very gifted and talented individual. I very much look forward to your future projects. A big thumbs up!

@fredhallman4439 4 жыл бұрын

MMO

@ryuadi8268 3 жыл бұрын

@@fredhallman4439 dafuq?

@ayushkumardasnayak7394 2 жыл бұрын

@royalduckss679 5 жыл бұрын

This dude is making a full on airplanes and I can barely fold my Clothes

@Chaupele 4 жыл бұрын

I feel you... we are in the same boat..... This guy is a genius

@TheBunnyDeveloper 4 жыл бұрын

You might wanna start practising the folding of your clothes soon..

@atherindigo2394 4 жыл бұрын

Exactly...

@cheekyd-z 4 жыл бұрын

Royalduckss not full on planes, RC planes.

@brentparker1665 4 жыл бұрын

lmao 😂 so true lol.

@lloydrobert6182 3 жыл бұрын

So many people here have truly appreciated your talent, and I have to add my little bit! You're very impressive, and your skills are absolutely top class. Wishing you all success in the future.

@hotice31 4 жыл бұрын

Amazing. Thank you for giving me so much happiness by letting me see this work of art and passion.

@brunofelipebrz 4 жыл бұрын

congratulations. that's the perfect mix between art and engineering

@AccompaKneed 4 жыл бұрын

And possibly research too?

@mactalk2871 4 жыл бұрын

In this case, the Engineering is art!

@lsubesteva 4 жыл бұрын

This is what a visual representation of dedication looks like! One of the most beautiful RC planes I’ve seen

@TechBihandu 3 жыл бұрын

to do the best landing, 1:slow down 2: open flaps, then the plane's Front nozzle gets up 3: turn up the wing brakes and Slats(if installed) 4: then don't chage the position of Elevators, rudders or Alerons.(exactly nothing to do. Just control if the plane goes wrong side) 5: Then see and enjoy! pretty cute plane lands itself by the help of flaps and the continued thrust to front of the plane. Good job and good work! Thanks for the creative idea!

@electricguy123 8 ай бұрын

I am a big fan of you, more than a role model 😍. Really appreciate your work and your patience. I am trying to learn the science and how to make planes from you and hope to meet you in the future.

@yycwill 5 жыл бұрын

Amazing! Do a A380 Like if you agree.

@RamyRC 5 жыл бұрын

someday 😉

@kalvinwinder 5 жыл бұрын

He did that a while ago

@banisudin 5 жыл бұрын

hell yeah

@yycwill 5 жыл бұрын

Surprised 😮 He replied

@laurentarming5484 5 жыл бұрын

yeah me too. @@yycwill

@antoniomarcos5321 5 жыл бұрын

Incredible. The level of detail and the amount of skill. Simply incredible!

@tomtalker2000 5 жыл бұрын

Yes exactly my thoughts. These are by NO MEANS toys...!!! You need too be an experienced pilot to fly one of these aircraft.

@kokoslegend4850 3 жыл бұрын

@@tomtalker2000 Ramy inspired me to make my own boeing 777 airplane. I make it 1 meter long, and it all works like it should. But I've never flow an aircraft appart from flight simulator frames, so how can you turn it to land with that speed? I'm afraid to fly it for the first time. Also i've probably made some mistakes, and maybe something gets jammed during flight.

@saras99tv 4 жыл бұрын

Gosh, it's something I can't really describe as amazing. I've never seen such an effort before. Thank you

@chicagoman58 4 жыл бұрын

Beautiful airplane, beautiful music, amazing craftsmanship. Bravo, well done!

@SlyFoxStudioz 4 жыл бұрын

You sir... Are amazing. I couldn't even imagine building one of these from scratch!

@shalintrambadia6154 4 жыл бұрын

Literally Amazing bro...I hardly watch full videos having a length of more than 10-12 mins but while watching this I do not know how those 18.21 mins gone.

@brentparker1665 4 жыл бұрын

This is incredible. Awesome mate. Art and Engineering perfection. Absolutely admired this. You documenting the entire thing.

@alencarlourenco3533 4 жыл бұрын

Trabalho perfeito. É preciso amor ao hobby para fazer um trabalho tão lindo. Parabéns. Poderia disponibilizar o projeto. O Brasil precisa de aeromodelos assim.

@ValentinesReps 4 жыл бұрын

The details are just incredible. Absolutely loved watching from start to finish.

@sarathsurya7029 3 жыл бұрын

😘😘😘😘

@sarathsurya7029 3 жыл бұрын

👍👍👍

@lamogt8428 3 жыл бұрын

Me too

@sisiramahesh5551 Жыл бұрын

awashya badu monawada

@abirami5214 5 жыл бұрын

Ramy you are the best in building rc airliners

@rektrc1142 5 жыл бұрын

I agree.

@cfnmedia 5 жыл бұрын

oimasdys jasdahn msdiuw lol :D

@blackphantom99 4 жыл бұрын

Far out you’ve come so far since the days on the floor Ramy! You’re a genius in my books man, been watching your channel for awhile now and it’s just amazing what you can do. Have a happy and safe weekend my friend.

@chosung2 Жыл бұрын

The amazing build would have been enough but then to add the perfect soundtrack to it??!! BRAVO SIR, BRAVO...

@jaspaw.5473 4 жыл бұрын

This just amazing! After seeing the down votes on this video I realize how much we should just do whatever we want in life however much people critics us and put us down. This is a true motivation, inspiration and a reason to get up and give it all you got because the fact is that believing in yourself is all you actually need. Thank you brother! I may never meet you but you touched my heart 💖.

@wilengle8468 4 жыл бұрын

The more I watch this video, the more I want to start on my project of building a Raytheon Hawker 4000 with a pair of edf's in place of the PW 208A TurboFan's. I've gotten the scaled drawings back from my print Shoppe that has printed out 3 sets of the plane so that I can put one up on the wall in my new shop and have a working copy with which to use as templates for the Fuselage, Wings and Tail Structure. My biggest challenge is building pylon's on the rear fuselage that can easily mount the engines and still not be too heavy. RAMY, You inspire me!! And for a Former Combat (F4D, F-111) Pilot along with some 8,300hrs in a C5A/B/M. I've had 3 Major Strokes and so I'm unable to obtain a Medical to go with my ATP, RC'ing allows me the opportunity that until now has been Nothing in the way of fun in Aviation!!

@kokoslegend4850 3 жыл бұрын

Same, I'm building a boeing 777-300er that's 1 meter long.

@durahs1268 4 жыл бұрын

It probably took him about a month to built this, he deserves alot of love for how much effort has put into this airplane, without him we wouldn't be able to watch this.

@mihirghawghawe9255 4 жыл бұрын

Sir it says took him about 10 months to do it. Lol mad respect

@durahs1268 4 жыл бұрын

Bruh and stop judging because I commented it before I saw the video that was 10 months that was pretty rude.

@ADTTH 3 жыл бұрын

@@durahs1268 @EdgyGamer wasn't rude

@richardtan4844 3 жыл бұрын

@@durahs1268 how on earth did he judge...

@ericbricks7952 3 жыл бұрын

Don't get depressed and think, you can't do anything. If you're reading this that means you've watched this video, this is the example of what is humanity made of... I salute you...

@marekeos 5 жыл бұрын

Major amounts of respect. This is absolutely stunning. I tip my hat!

@bimmerboye896 5 жыл бұрын

M'lady

@tamadichikuribayashi9639 4 жыл бұрын

Oh I can’t believe that you make it at your home .

@gerardjones7881 4 жыл бұрын

bachelor with inflatable date.

@ThunderMappinGamerYT 3 жыл бұрын

In his workshop in he's house, i mean yeah there's still a word House

@fonrcscaleconstruction2255 4 жыл бұрын

Very beautiful. Can fly very stable. I really like airplanes and playing.

@Ted_RBLXoff 4 жыл бұрын

Rough landing tho, glad it didnt get damaged! Great work and effort. Love it

@zombenut 5 жыл бұрын

Incredibly gifted craftsmen. Enjoyed the hell out of watching this....bravo!!!

@the1stJabneel 5 жыл бұрын

This is probably the most amazing video I've ever seen. Absolutely amazing! Fantastic job on the airplane, and on the video!

@papasplanes.956 Жыл бұрын

Your talent and skills are unparalleled! I sent this video to a friend who is a 777 pilot. He was amazed! I'm light years behind you, still building balsa kits. But thoroughly enjoy it.

@jonasnetobh 2 жыл бұрын

I've never seen a job so beautiful and perfect like this! I was thrilled at the end of the video with the plane ready. Congratulations! For creativity and dedication. I'm a big fan of Boeing and especially Lufthansa! Show!!! My name is Jonas, I write to you from Belo Horizonte, Minas Gerais, Brazil!

@magnusebsen9003 4 жыл бұрын

Respect! I have never seen anything like this its just Amazing! I wish i had these skills to do that. Again Respect.

@lucianoasantana 4 жыл бұрын

Magnus Ebsen I agree. Respect is the word👏🏻👏🏻👏🏻

@MJTributeChannel2040 4 жыл бұрын

Very impressive! The mechanics for the flaps amazed me the most! Huge respect

@anshumanroutray4752 3 жыл бұрын

MJ_Tribute -Channel me too I actually never thought of that

@golfgreer735 4 жыл бұрын

That is incredible. I have long wondered who these models are built. It looks like fiberglass gets the body made. Then, you use 3D printing too. All of this was unavailable decades ago, Amazing.

@cass71291 5 жыл бұрын

Hey Sir, I’m sitting here in NYC. Just watched your video on this build. AMAZING! BRILLIANTLY TALENTED! Your planning, designing, building, and flying skills are OUTSTANDING! Thank you for sharing your work with the world. 👍🏼😎

@iamsfa777 5 жыл бұрын

No words to say.... Your 10 months of hardwork is really worth it... Amazing work guys... It replicates the real B777-9X 😍✌️

@neil4025 Жыл бұрын

I'm new to your channel and thought you had just purchased the rc aircraft. Seeing you actually build it yourself is so impressive. Such skill and what a fantastic finished article Brilliant

@specforged5651 3 жыл бұрын

Don’t get me wrong this is still absolutely amazing, but it’s crazy to see what you’re capable of from then until now. With your dedicated shop as well as the tools to help you in the building process and of course the carbon fiber. Leaps and bounds. I would think you would agree this was much harder even though your models are now so much more involved and intricate with the different materials, processes, etc. Awesome!

@fpvlive 5 жыл бұрын

I just wondering which loser gives a thumbs down. This is just amazing craftmanship.

@planesstevee 5 жыл бұрын

only jealous people mate!

@vg5157 5 жыл бұрын

Jelle Kaptein he doesn’t have a working table ?

@javonteanthony7956 5 жыл бұрын

Fuck off you just clout chasing

@routadu 4 жыл бұрын

Maybe a Ryanair pilot Because he didn't crash the aircraft on landing

@freetoiletpaperumakeit4u508 4 жыл бұрын

Amazing Craftmanship that's correct!

@theycallmepr8724 5 жыл бұрын

17:23 classic ryanair landing..

@insanity1420 4 жыл бұрын

as swiss would say, "not butter"

@haykalabduh110 4 жыл бұрын

🤣🤣🤣

@darrylbroatch862 3 жыл бұрын

I know why you were so devastated by the crash... seeing all the effort and time gone in an instant. I am glad you keep moving forward. Maybe you will build another 777 again .

@stephenport4768 3 жыл бұрын

Excellent quality build when watching the maiden flight couldn't help notice a minor issue with the landing gear glad 5he flight went well with no major issues

@anndrew7958 4 жыл бұрын

Attention to details, I really enjoyed every second of watching this🇿🇼

@garyhaber333 4 жыл бұрын

Truly amazing Rami! One of the coolest builds I've seen yet! Your attention to detail leaves me speechless. Love large scale RC commercial jets! New subscriber! Cant wait to see more!

@warptek 4 жыл бұрын

That was incredible! Congratulations, good sir.

@rbgfuntv 4 жыл бұрын

True engineering!! Ur hard work n efforts not less than making a real plane!! Appreciated!!!!

@romeotialian 4 жыл бұрын

wonderful!! KEEP BUILDING : KEEP INSPIRING

@ShaikatMozumder 5 жыл бұрын

such an amazing effort. truly mesmerized. wish u all the best upcoming projects. love from Bangladesh 🇧🇩🇧🇩🇧🇩

@michaelkrentzin 3 жыл бұрын

Are you kidding me???!!! This is extremely impressive. You are one talented person. Amazing!

@mariosoto5224 4 жыл бұрын

working hard and patience but the ending is magnific, congrats to the builder good job one of the must beatifull Boeing aircraft

@captainsid5770 5 жыл бұрын

Waiting for the A350 XWB now...

@yeboi4661 5 жыл бұрын

I went on that yesterday

@jimnorton8861 5 жыл бұрын

This showed up in my recommended to watch. It did not disappoint. 👍

@muhammadhalimarrasyid5648 3 жыл бұрын

Impossible for me to make like that

@stack8778 4 жыл бұрын

🎉💥💥💥Congrats on the Amazing Build !! Definitely something to be proud of !! I can’t wait to see what your planning on doing next !! Keep up the Great Work and Vids !! 👍✌️

@robertz5958 4 жыл бұрын

Absolutely incredible once again! What talent, you are truly brilliant! Thanks for helping to keep KZfaq interesting Ramy!

@CrazzlY 5 жыл бұрын

This has to be one of the most amazing projects I've ever seen! I salute you!

@psychlou 4 жыл бұрын

Fantastic Ramy! Great video, story, and plane built. This is hugely impressive. It's a great day for me when I hammer a nail on the wall to hang a picture. But this? I am in awe!

@sarveshingale7949 3 жыл бұрын

Absolutely beautiful plane, great work.

@thisisadebrown 5 жыл бұрын

you deserve more than thumbs up for this excellently presented video... well done on the a/c too!

@user-sb5ih3wj7z 5 жыл бұрын

すごい！！感動しました！！　In Japan🇯🇵

@shavocadovoid 4 жыл бұрын

Ramy can you make a video on how we can make a smaller model of any commercial jet? You are by far the best person ever to step foot in this RC airplane subject, and everyone covets to know you can make one.

@vlademirbenevides9850 3 жыл бұрын

Parabéns. Que belo trabalho, vc tem muito talento ❗🤩🇧🇷

@mark675 5 жыл бұрын

That would of took me 10 years and it would still look like crap 😄 Absolute work of art that is, amazing build!

@jaimerodriguez351--.. 4 жыл бұрын

Amazing dedication, and even more amazing work. Congrats and god bless.

@maryanderson2507 3 жыл бұрын

Wow that was incredible! All that work that scary first flight! Must have been an awesome feeling! Congratulations!

@ceoabdels 2 жыл бұрын

If you are still watching this in 2021 you are a true fan of ramy

@jetstreamaviation5650 5 жыл бұрын

I just went to the Boeing factory in Everett today and saw the two 777X aeroplanes being built!

@gigaboat 5 жыл бұрын

SHARE A VIDEO PLEASE

@yoyoyoyoshua 5 жыл бұрын

@@gigaboat No video's or pictures inside the factory

@cambo3256 5 жыл бұрын

Wow. A lot of effort went into that. Talented.

@li-te9cn 5 жыл бұрын

The engineers at Boeing.

@sien1011 5 жыл бұрын

A must-like video..amazing..

@engineergaming4295 4 жыл бұрын

zhuang zhuang li how he lives I germany

@quyettrunglao 3 жыл бұрын

I was really amazed. Good God it's so perfect, I love the way you make things. All very perfect, he too must be very perfect too. My brother can call that?

@Tintenkobold 3 жыл бұрын

I'm not into RC building but this is cool. Great skills, good video!

@ghotridr9550 5 жыл бұрын

Really man,great work👍 Lufthansa should definitely see this

@CaptainSloose 5 жыл бұрын

awesome build man!! you need to get yourself a work bench sir! watching you work on the floor was painful lol

@rogerredford6242 2 жыл бұрын

Absolutely amazing job. Watched the entire process in utter awe. Don't worry about the music. I watched the whole video with the sound muted.

@BB-ot3vd 4 жыл бұрын

Just wow !!! Crazy amazing ! Tho I wouldn’t recommend get on that flight, the turbulence and the landing would leave me traumatized for years 😂 lol.

@nagaviper1169 5 жыл бұрын

Wow, beautiful aircraft. Very well done.

@caryl.1113 4 жыл бұрын

A build of this magnitude deserves a proper, paved runway! Congratulations, gentlemen.

@stevensondang9817 3 жыл бұрын

I hereby concisely state that I will never unsub from your cool channel

@marcodonis6633 4 жыл бұрын

This is so amazing, thank you for sharing and congrats

@tiozaokanallfommfomm302 5 жыл бұрын

goo morning my friend Im brasilian and Ive been following your work ...... congratulations .....I imagine the nervousness to take off for the first time........................

@marthijn-7544 5 жыл бұрын

I love your videos and I understand that making an airplane is so much work! The 777 looks awesome! There is just one thing (but maybe I’m wrong!✌🏻), the engines look a bit short in the length. At the end I hope you will once make a KLM 747 or 787😁

@jovanblackman2608 5 жыл бұрын

I was saying the same thing but they still get the job done

@MultiSweeney1 5 жыл бұрын

As will all scale RC models you have to strike a balance between how good it looks, and how well it flies. Maybe longer engine nacelles would have reduced thrust. Though just looking at them, they could do with being tighter around the fans.

@untaldarrel 3 жыл бұрын

Why the hell i cannot hit the Like button a million times! This is absolutely stunning! 🤩😍🔥🤘🏼 You're the best Ramy

@EasyModeFishing Жыл бұрын

The 777-9 is going to be a beast when it gets released

@arlesiodiamantino5727 4 жыл бұрын

To this man I can call him engineer 🔥🙌🏾

@azami567 3 жыл бұрын

builder absolutely

@muhammadbashir4301 4 жыл бұрын

Mashallah

@wahyu3165 3 жыл бұрын

@@nellavia cie nyasar

@khoinguyen7283 4 жыл бұрын

The plane is very beautiful! I come from Vietnam wish you success in your work!

@chubbyboy1738 3 жыл бұрын

Wow! Greeting from Japan. It sounds great! Very fantastic! A part of 15:58, I think it that these are very realistic. Thank you!

@dalesteyn9625 4 жыл бұрын

Simply amazing !!! Enjoyed it from start to end. If possible could you share the details of designing so that some of us would be inspired to start our own project

@abdelappie1989 3 жыл бұрын

@Ramy RC yess pleasse

@kokoslegend4850 3 жыл бұрын

Yes, like the dimensions. this commend should get way more likes...

@williamdore4489 4 жыл бұрын

This is one of the most amazing build's I've ever seen sub'd and now shall be watching more of your videos

@MidknightMechanics 4 жыл бұрын

Gorgeous man. Incredible aircraft, great job.

@marcosrocha9113 3 жыл бұрын

Eu só encontro uma palavra para o seu trabalho,GENIAL!!!

@The_dream_of_flying 5 жыл бұрын

Very very good work. Perfekt.

@kenneths8253 4 жыл бұрын

That was freaking awesome

@oneljoseph1921 3 жыл бұрын

Me pueden hacer uno

@oneljoseph1921 3 жыл бұрын

Porfa

@eggofuhrmann7373 3 жыл бұрын

You are a little bit crazy (most positive way...), I love your Ideas - 3d-printed negatives, very good ! Awesome planes !

@valerianosoldano5980 4 жыл бұрын

stunning! congrats. It's a very good job and amazing to see airplane flying!!

@sijijoseph712 5 жыл бұрын

A cessna 182 whose wing is 1.5m skylane Please BUILD. DUDE I ALSO WANT TO MAKE ONE SO MAN PLEASE

@finestartindonesia5194 5 жыл бұрын

Hy ramy, im appreciate for your innovation about RC plane. You very smart... i follow you on instagram 👍🏻

@sp4263 Жыл бұрын

Enjoyed watching you build the beast as much as I enjoy watching them fly 👍👍👍

@estruccon 4 жыл бұрын

Eres un gran artista....muchas horas de trabajo y dedicacion..detalles nimimos...fantastico..exelente..gracias por mostrar tu arte..