Building the HAL 9000 Moebius Model from 2001: A Space Odyssey

No video

Building the HAL 9000 Moebius Model from 2001: A Space Odyssey

Рет қаралды 8,319

James Woolley

Күн бұрын

I received the HAL 9000 Moebius Model over Christmas and decided to film building it. hope you enjoy!

Пікірлер: 32

@pastorrich7436 Жыл бұрын

A fun and entertaining video. Can't wait to get mine! Going to mount it between my dual monitors at my desk. Blessings!!

@trainliker100 Жыл бұрын

Here is a trick (some model railroaders do this especially when masking striping for passenger cars) for a clean edge and especially to prevent paint from the second color from bleeding under the edge of the tape onto the first color. After masking, first spray along the edge with the color you just masked over. This creates a seal at the edge of the masking tape of the color that is under the tape. Then paint the contrasting color. Then remove the tape. This can be especially useful if masking a surface that has some texture.

@JamesWoolley1 Жыл бұрын

Thanks for the tip! Im pretty new to making models as you can probably tell. Ill be sure to use that method on the next one :)

@zepocean8580 4 жыл бұрын

That's awesome. Saw this on Reddit..Very clean job .

@JamesWoolley1 4 жыл бұрын

Thank you! :)

@vaderbase 3 жыл бұрын

Such a nice and oddly satisfying video. Nice music choice and cut. Thank you so much for uploading. Now I want to have this model, too. P.S.: you can use the letter "R" from the strange "Reset"-label to make the "NIKKO" a real "NIKKOR" lens... ;-)

@CB-RADIO-UK 3 жыл бұрын

Thank you for showing the water slide stickers applying to the lens. I was wondering about that.

@JamesWoolley1 3 жыл бұрын

If you submerge the stickers in water for a minute or so, then they should slide off the paper onto the model like you see in the video :)

@RA-uj3nm 3 жыл бұрын

Awesome work! Excellent presentation, editing & music. Really good stuff!

@petermot645 3 жыл бұрын

I’m afraid you’ve done a great job. 🚀

@JamesWoolley1 3 жыл бұрын

Thanks! 🙂

@brianarbenz1329 3 жыл бұрын

Can you make a replica of that delicious food Frank eats?

@milesbenson7296 3 жыл бұрын

Beautiful job well done. Could I ask for the brand name of that adhesive you used? That fine point looks great!

@JamesWoolley1 3 жыл бұрын

Thanks! :) The brand name is called Revell.

@trainliker100 Жыл бұрын

If you want to add sound (such as "I'm sorry Dave. I'm afraid I can't do that.") another builder describes how at KZfaq video kzfaq.info/get/bejne/bsepnZN8ltmugoE.html

@JamesWoolley1 Жыл бұрын

Thats soo coo! Thanks :)

@user-mn1vy5ng1r 5 ай бұрын

Why did you choose to paint the grill silver when the Adam Savage/Peter Jackson prop it is black?

@Exit34 Жыл бұрын

Looks amazing James! Seriously question, would you build one of these for me and if so how much?

@DistractedTrader 5 ай бұрын

Someone should re-attempt this with GPT and voice incorporated, with a Hal overlay haha

@stevehj 5 ай бұрын

what spray paints did you use (make and color)?

@samd3231 Ай бұрын

Bravo après ce n'est pas très compliqué à monter il n'y a pas beaucoup de pièces et c'est vendu assez cher !! je crois c'est dommage ... sinon j'ai adoré la façon dont c'est filmé la réalisation avec la musique de 2001 de du début à la fin bravo malgré tout !!!

@boparadigm 4 жыл бұрын

Did you have any fogging occur on the lenses from the glue used, as in is there any fogging that occurred since glueing that you can see?

@giovannidallasen221 2 жыл бұрын

Hello, very good job! Did you use even a primer before painting and which spray have you used? Thanks!

@JamesWoolley1 2 жыл бұрын

Thanks! I did use primer yes. But I'm not sure what brand it was sorry!

@giovannidallasen221 2 жыл бұрын

@@JamesWoolley1 thanks a lot! a further question: I have finished the assembly but the LED in my case is simply red and not "yellow to read" and not spread the light through the lens. Do you have any suggestions in away to get the right lighting? Thanks a lot!

@trainliker100 Жыл бұрын

A very good primer for such things, if you are fine with a rattle can, is Tamiya fine surface primer. A lot of plastic kit builders use it. Depending on paint type, you don't necessarily need a primer. For example, if you use a solvent based paint like Tru-Color it should bond to the plastic just fine. But a solvent based paint can also damage the plastic if applied to wet. Often, skilled modelers use an airbrush for painting plastic with solvent based paints so they get better control.

@charliewatson2994 4 жыл бұрын

Hi, bro, saw your video about Packet Sniffer Raspberry,, i need the script, how to setup ,,plz reply

@deer_vision Жыл бұрын

*SLAMS CREDIT CARD ON TABLE*

@markhamp2372 Жыл бұрын

Why do we have to have a bloody computer if we need to buy these things . Why do companies keep putting BLOCKS on sales this way.

@philmcclenaghan7056 4 жыл бұрын

it does not make any sense why you covered the faceplate in tape, painted, then covered the outsides with tape, painted. At the start it didn't matter if you got any black on the outsides as you would paint over it with silver anyway.

@CollectingWeekly 4 жыл бұрын

I just made this kit today, the brushed metal effect is pretty shallow, it’s probably to preserve this texture.

@brianarbenz1329 3 жыл бұрын

Phil, it can only be attributed to human error. This sort of thing has cropped up before and it has alway been attributable to human error. Honestly, I wouldn’t worry myself over it.