Building The New 2021 Tamiya Opel Calibra V6 TA02 1/10th RC Race Car. Kit 47461 (A LOVELY CHASSIS)

  Рет қаралды 21,937

RCKicks

RCKicks

Күн бұрын

In this video, we did a detailed step by step build of the new rerelease (June 2021) TA02 Tamiya Opel Calibra V6 DTM 1/10th RC race car. A direct reproduction of the 1995 original kit 58150. The TA02 chassis is well-loved by Tamiya fans, resulting in the TA02 receiving a substantial number of body kits and kit releases over the years. Let's dive into this new offering from Tamiya and see how easy it is to build
You can find way more content from RCKicks on the below links as well as help support the RCKicks channel by becoming a Kicker Patreon:
/ rckicks
RCKicks Facebook Page: / www.rckicks.co.uk
RCKicks Group Page: / 449280332477997
RCKicks Instagram: / rckickscom
#Opel #RCKicks #TA02

Пікірлер: 64
@PopalongRC
@PopalongRC 3 жыл бұрын
I love classic touring cars
@kahmed7328
@kahmed7328 3 жыл бұрын
My first Tamiya chassis was a TA02. Castrol Celica.
@gregory9157
@gregory9157 3 жыл бұрын
Hi , another speed build. You make it all look easy. I am astonished about the amount of reactions I had on my question that I put in the rc kicks community. This is a true group of people that are willing to help. 👍✔️
@RCKickschannel
@RCKickschannel 3 жыл бұрын
It’s a great bunch for sure . Jenny & I try and keep the trouble makes and junk out so it’s a safe friendly place for all
@UncleBobsRC
@UncleBobsRC 3 жыл бұрын
Those are such great chassis/builds. i did a ton of them in the mid 90's. For as old as the chassis is, its still a good handler (for what it is). Your spot on when you said they are smooth. Awesome Job, Awesome Build!!!!!
@RCACTIONAUSTRALIA
@RCACTIONAUSTRALIA 3 жыл бұрын
Lovely Gavin 🤩 Can’t wait to build mind
@theonlyjasonkirk
@theonlyjasonkirk 3 жыл бұрын
Still my favourite chassis on my Toyota Celica GT4 although it is the TA 01. Great memories from Christmas 1991. Great stuff Gavin!
@andyrobinsonrc2480
@andyrobinsonrc2480 3 жыл бұрын
Funny enough I ran out of bearings building mine as well Gav , same as you, the ones for the front steering knuckles/hubs. Nice build ;)
@irritablearchitect
@irritablearchitect 3 жыл бұрын
Thanks, Gavin!
@parkecorepersonaltrainingp2601
@parkecorepersonaltrainingp2601 3 жыл бұрын
I had one of these years ago. Wonderful
@barrycheesemore2928
@barrycheesemore2928 3 жыл бұрын
Excellent video as always dude, looks like a nice easy build. I know a lot of people hate building ball diffs, but weirdly enough I don't, I also quite like building the shocks too. God I'm a weirdo ;)
@stevenyates3196
@stevenyates3196 3 жыл бұрын
Nice colorful chassis there. Great video I like the fact you include the hop up options. 👍
@robertlongley9153
@robertlongley9153 3 жыл бұрын
Nice starter kit for sure.
@JDMJDK
@JDMJDK 3 жыл бұрын
Hopefully they’ll re-re the Alfa Romeo 155 ti one day since I had the Larini/Nannini version in the early 90s and regret ever letting it go. I recently over compensated and bought the Lancia 037 and the Calibra for my own hobby space to display and not open anytime soon. Keep up the amazing Tamiya content and I’ll eagerly follow! 👍🏼🏁
@michaeldack4930
@michaeldack4930 3 жыл бұрын
Brilliant, got one today! Looking forward to the shell build.
@RCKickschannel
@RCKickschannel 3 жыл бұрын
Body will be done tomorrow Michael
@michaelqendro9825
@michaelqendro9825 3 жыл бұрын
Nice looking car and chassis set up.
@WIMBIRC
@WIMBIRC 3 жыл бұрын
very cool Rc Car my Friend 🚙
@RC4X4
@RC4X4 3 жыл бұрын
I remeber building these when they first came out and the TA01. I still have my TA03F Opel. I love the Opel body. I hear ya on the supplies, bearings, receivers, servos etc.. They go fast. I try to have all that stuff before I build,
@DaveyGa
@DaveyGa 3 жыл бұрын
Was happily following along thinking what a nice little chassis with an included ball diff, then I see a Z bend rod as the steering link??!! Nice video Gav.
@robsteel8318
@robsteel8318 3 жыл бұрын
Quite a smart chassis that one
@mattmclafferty6265
@mattmclafferty6265 3 жыл бұрын
Elvin and the Chipmonks soundtrack. Nice build mate.
@lukeparry9894
@lukeparry9894 2 жыл бұрын
I’ve just got one of these it’s gonna be my first time doing one excitied and nervous ha
@RCKickschannel
@RCKickschannel 2 жыл бұрын
Have fun Luke, it's a lovely kit.
@sf2372
@sf2372 3 жыл бұрын
what a legend richard loria is....
@RCKickschannel
@RCKickschannel 3 жыл бұрын
100%! It really helps keep costs down that's for sure and it allows me to make even more RC content :) I can't thank him or the RCKicks Patreons enough.
@KamalNsouli
@KamalNsouli 3 жыл бұрын
What a coincidence, both you and Glenn published TA02 build videos on the same day!
@RCKickschannel
@RCKickschannel 3 жыл бұрын
Small world :) Different kits this time but we have even done the same kits before.
@fredriktingelof687
@fredriktingelof687 3 жыл бұрын
Hi 😀 must first say that your new studio is a success! 👍 The design of the bathtub chassis and steering hubs is what distinguishes TA01 from TA02. TA 01 has the red ones (like Top force and other off road buggies) TA02 got revised steering hubs (blue) to make room for longer suspension arms for a better suspension geometry.
@aaronisaac6490
@aaronisaac6490 3 жыл бұрын
Great video! Personally I'd not grease the gears as debris will stick on them during disassembly. If they're dry, cleaning the gears will be much easier :D
@schuttrostig5729
@schuttrostig5729 2 жыл бұрын
Phantastic job you did building, i always need 5 trys to get the fumbly parts together like ball diff, washers in upper suspension arms, e clips and the u-wire for the lower front arms. I think there are at least 3 diffrent speed gear numbers by tamiya that all have the same speed gear in, so if you cant get one specific number the others are good as well. My car has problems with the rear ball diff, it cant take the load of a sports-tuned motor. Not sure if it can when build diffrent or if its just not up to stronger motors, how are others experiences there?
@1701_FyldeFlyer
@1701_FyldeFlyer 3 жыл бұрын
I recently sold an 1990's Tamiya Celica GT4 with the TA02. Not sure I should have LOL!
@robcraighill6315
@robcraighill6315 3 жыл бұрын
Mine arrived on Friday - never mind UJs, just finding a can of PS5 at a reasonable price is proving difficult enough!
@mttbsg
@mttbsg 3 жыл бұрын
Are there certain bearing sizes commonly used in Tamiya kits?
@RangerPate
@RangerPate 3 жыл бұрын
Why only one spacer (v11) on shock shaft? -manual shows 2 (v11 and v3) and they are spot on attleast on my calibra build.
@brettblackshaw6582
@brettblackshaw6582 4 ай бұрын
Do you have a link to the servo you used for this build? Im starting the exact same one.
@ra666lf
@ra666lf 3 жыл бұрын
In the diff should replace the pessure bearing to the ta03 once 1150 is the number so i think
@coryn1980
@coryn1980 3 жыл бұрын
Top work Looks very nice Just ordered one 👍 do they do a carbon chassis for it great video
@RCKickschannel
@RCKickschannel 3 жыл бұрын
Yes you can get carbon chassis options for it.
@h-jg7730
@h-jg7730 3 жыл бұрын
The Chassis is to 80% a Manta Ray Chassis. Only diffrence is the rear ball diff, shorter arms, dampers and lower damper mounts.
@pongosp
@pongosp 2 жыл бұрын
Quick question does the kit come with bearings for the wheels as well?
@alphawlff
@alphawlff 2 жыл бұрын
No
@rcdrive2563
@rcdrive2563 3 жыл бұрын
what camera you're using?
@warwickeioncampbell4737
@warwickeioncampbell4737 3 жыл бұрын
did that have the angled rear arms, drive shafts angled back. The other version TA01 had the drive shafts straight.
@RCKickschannel
@RCKickschannel 3 жыл бұрын
Yep you are correct
@jeremyoconnor4853
@jeremyoconnor4853 2 жыл бұрын
Can you leave the drive shaft out and make it 2 wheel drive.
@alphawlff
@alphawlff 2 жыл бұрын
Yes
@bravo0105
@bravo0105 3 жыл бұрын
When I started buying Tamiya touring-car chassis, ball differentials were standard and that’s what I prefer despite potential loosening. The price of optional ball differentials for later chassis makes me gag.
@onlinehelper374
@onlinehelper374 3 жыл бұрын
Why a front differential is with gears and back one is ball diff?
@RCKickschannel
@RCKickschannel 3 жыл бұрын
I know, you would think the rear would have the gear diff. If you are racing I’m told it’s best to run two gear diffs.
@onlinehelper374
@onlinehelper374 3 жыл бұрын
@@RCKickschannel I'm not racer, I only love to watch that kind of videos.Are ball diff slip?
@michaelebersole6989
@michaelebersole6989 Жыл бұрын
What's the difference between TAO2 and TAO1?
@RCKickschannel
@RCKickschannel Жыл бұрын
TA02 tamiyabase.com/chassis/55-ta02 TA01 tamiyabase.com/chassis/50-ta01
@SuperBubba360
@SuperBubba360 3 жыл бұрын
Tamiya better drop a full line of parts
@RCKickschannel
@RCKickschannel 3 жыл бұрын
Yep it would be nice
@leewprice
@leewprice 3 жыл бұрын
Hi! Do you buy ball bearings in bulk? Is this chassis bigger than the TT02? And how do they compare, please? Loving your new channel btw
@RCKickschannel
@RCKickschannel 3 жыл бұрын
Yep I try to get the bearings in bulk. I like the TA02 over the TT02 myself.
@davidturner2365
@davidturner2365 3 жыл бұрын
Ah they got rid of that alloy cog in the rear gearbox ?
@RCKickschannel
@RCKickschannel 3 жыл бұрын
Yep it’s gone in the rere kit but funny it was left in on the Evo. I have another set coming so Incan swap out my alloy Evo one.
@davidturner2365
@davidturner2365 3 жыл бұрын
Cool it does make a mess in the gearbox after time great vid 👍👍
@TABRO284
@TABRO284 3 жыл бұрын
It annoys me that tamiya stopped printing the manuals with the blue colour. The blue highlights made them much nicer to follow.
@RCKickschannel
@RCKickschannel 3 жыл бұрын
How about the Jun Watanabe Hornet purple manual?
@TABRO284
@TABRO284 3 жыл бұрын
@@RCKickschannel Never seen that one.
@SamuraiBlues5
@SamuraiBlues5 3 жыл бұрын
U know, i am not a fan of the TA02. But hell. i really like the pre cut wheel arches. I fuck up arches all the time. Why can't they sell em all like that!!
e315: Tamiya TA02 Aluminum Upgrades, Jazz Rider
23:45
AMPRO Engineering
Рет қаралды 13 М.
UNO!
00:18
БРУНО
Рет қаралды 2,3 МЛН
I'm Excited To see If Kelly Can Meet This Challenge!
00:16
Mini Katana
Рет қаралды 28 МЛН
E325: Custom Tamiya Ford Torino TA02 Chassis, Part 1!
16:18
AMPRO Engineering
Рет қаралды 8 М.
Lexan CAN look this good (with a little work)! RWB Porsche
11:00
Scale Builder's Guild
Рет қаралды 17 М.
Tamiya Calibra TA02 41461 DTM (TA02) R/C
9:35
Pangare RC
Рет қаралды 5 М.
TA-02 Carbon Chassis Build
30:36
RC Tak
Рет қаралды 4,2 М.
DTM Calibra test drive by Ben Edwards
17:40
supertouring22
Рет қаралды 28 М.
Why Is He Unhappy…?
0:26
Alan Chikin Chow
Рет қаралды 63 МЛН
Крокодил получил по-заслугам! 😱
0:32
КиноСклад
Рет қаралды 25 МЛН
KARMA AT SCHOOL 🏫 Stop time
0:32
dednahype
Рет қаралды 51 МЛН
Слепой узнал о измене своей жены😳
1:00