Use this link to Try Solidworks online for free! bit.ly/2zaQKB0-Solidworks-Free-Trial

Dude... Cutting a pipe via CNC with a torch is the stuff of dreams.... and you built this? NUTS.

Pretty sure I was sitting at that same table ;) Awesome project! Looking forward to the series.

Shout out to SolidWorks they obviously knew you were someone worth investing in. Hopefully they sponsor many more projects of yours in the future.

This is amazing Jeremy! As an engineer who draws in CAD, creates programs, operates waterjets, and regularly fixes and maintains them, I have the upmost respect for anyone who builds any sort of CNC device from scratch. Even installing a new machine can be a massive task. I like to think of myself as a fairly intelligent person, but I'm always blown away by your brilliance and how articulate you are. Bravo!

First 40 seconds: Jeremey's reaction "This is officially the coolest thing I've made. Look at that! UNH!!!" (great big grin on his face) This calls for an "immediate" thumbs up!! 👍😎😁

I am gobsmacked at this project. A HUGE tip of my hat to Solid Works for sponsoring you. I look forward to more on this project.

I started using SolidWorks years ago in my small startup design and manufacturing business. I ended up with a room full of engineers, each with their own SW license, by the time I sold my business last year. I can honestly say I never could have had the level of success I did without SolidWorks, their support, and training. After six months of sitting on my behind watching KZfaq I'm starting to get ideas again. I think it's almost time to get a fresh license and start the process all over again. Your shop is looking great by the way.

Holy shit man, you took it to the next level exponentially. You are going to sky rocket in subs with this. Honestly speaking this is top tier geekery on you tube. Can't wait to see more.

The amount of work that this project involved must have been daunting. Kudos to you and SolidWorks for doing this for us and rewarding you for your hard work.

My man! I sub to a lot of channels, ranging from woodworking, forging/knife making, CNC, chemistry.. just tons of subjects. The DIY type stuff just goes with my hobbies, and work (industrial maintenance). I’ve learned a lot from you, so I was so thrilled to see this. You are one of the few you tubers I watch that I really believe needed some sort of break to push their content. The sponsorship is a blessing for you and all your viewers. I really look forward to see where you go from here. It’s kind of weird how excited I am, for another guy, on the other side of my iPad.

Whoa. This is beyond cool. I'm super looking forward to your videos about this project.

Amazing Mr. Fielding! I teach SW in my mechatronics class. We program CNC mill/router/plasma/4thaxis/laser but BUILDING one is a dream. I'll show my high schoolers while we work on their CSWA.

Oh man! Haven't checked in on the channel in a long time (tiny shop, space saving days). The resources are really helping that vision come through. So stoked for all you're doing and what's to come. Thanks!

So that's what you've been up to! Awesome! I'm really excited about the build series, especially how you rolled your own rotary phase converter which I'm in the process of now.

Solid works made a brilliant move. Your inquisitive mind and ingenuity is pure gold.

This is AWESOME. So excited for you.. can only imagine how cool that must have been to have Solidworks reach out like that. And you totally deserve it.. it's great to see more and more people discover how cool your channel is. Can't wait for the rest of this project and more to come in the future!

I have been subscribed to you for a long time Jeremy, learned a lot from you and always enjoyed you grabbing treadmills and washers from the side of the road and this one of my favourite videos of yours, you can feel the excitement you are experiencing, it is infectious and hats off to Racheal and Solidworks for identifying the motives for your vids and suporting education, often times youtubers are tool/equipment collectors posing as makers/educators, you are the real deal and solid works was smart enough to know the difference, well done SW

Just found your channel last night. Was watching the progression from treadmill and washing machine motors and then this. I was like "holy crap, that's amazing". Love to have a tool like that to build with. Such a smart guy and love the way you present and put these videos together. Subscribed and hit the bell. Looking forward to watching more from you. Glad to see you got such an awesome sponsor.

As a CNC programming student that has a soft spot for Solidworks, I am really looking forward to this series. I watched your electric motors videos a while back, and started casually following you. Ever since you dropped that picture of G code on Instagram I have been eagerly awaiting this video.

This is AWESOME! Kudos to Solidworks for sponsoring this. I'm looking forward to watching the full series on this.

Jeremy, I've enjoyed your videos for years. Congratulations on the new sponsor. I'm very pleased with the CNC project. Looking forward to the series!

Really awesome. Don’t think they could had picked a better person to sponsor

We're happy to have you as a SOLIDWORKS customer, and look forward to seeing the rest of the build videos!

Rachel, wherever you are, you're a legend! This guy is doing great stuff, educating people and getting them excited about making things and that's one of the most valuable things you could ever invest in. Imagine the thousands of kids and teenagers watching people like Jeremy, every day, getting familiar with designing, engineering and creating things and going on to make this their lives. As much harm as the internet has caused, this stuff is an example of the great things it lets us do

I literally stood up in my living room and applauded you Jeremy. I am so excited. And certainly thanks to SolidWorks.

This absolutely one of the coolest things I have seen, and not just on KZfaq. And it's a guy in his garage. Outstanding!

Solidworks needs to offer a dramatically reduced price for hobby users like Fusion 360 does.

Do you know how many people are going to be soooo jealous when they see your new toy!!! Man I can't wait to see what that can do!!

That's the true face of joy right there. You are the type of person that makes me love KZfaq. Looking foward to the next videos.

I cant believe you kept this a secret... I saw the tour you gave of your new shop. You said you were excited, but.... sir, you must give a master's lesson in poker! I have chills just thinking about getting a call like that. Well done!!

Jeremy Fielding mate you are a legend. Throughout my career, I've been watching KZfaq clips and I can say you are by far the best and easiest educator to watch in the engineer side of things. I wish I was in your shoes and had the time and money to do everyone of your videos. I have started back down the rabbit hole now I'm back in engineering full time and hope to get a few of these project done. Thank again for the great videos and the time and effort you put into it.

Jeremy it’s always a pleasure to check out your videos, great to see you getting support from solidworks too. Can’t wait to see the rest.

Wow. Just. Wow. Congratulations and well deserved! Looking forward to hearing a LOT more about the projects coming off this beast.

I was super excited to see you had a new video up, and it looks awesome! Can't wait to see what kind of projects you get up to with that.

Thank you so much for sharing this knowledge with us. Can't wait to see the series, and congrats!

Awesome work Jeremy! I'm a machinist (old school) going on 40 years now.This is great stuff to watch! You are the future! Keep up the great work!

Congratulations on the sponsorship, and credit to SolidWorks for seeing your ability. You so deserve the boost - your content is awesome. I can't wait to see more.

Just found your channel. I have been using Solidworks since 2011. I love it. I, too, have my own license at home. I draw everything first. Bathroom Remodel, Radio Control Parts, Drone Parts and have even designed my own CNC Router. It is almost complete. A couple more weeks and I will be cutting my own parts. Woo Hoo. Anyway, thanks for the info and keep it coming.

Im incredibly exited about this project! You have a great way of explaining, can’t wait to see more!

Man I'm so glad you're finding success with your channel, I think its awesome! You're a good teacher, I like how you recycle and re-use old equipment too. Cheers!

Nice!! My first cnc table was a 4x8 practical CNC plasma table. It had a few quirks but in the end it got the job done. I added a water tray to it, made it completely out of aluminum.

Jeremy, I love your content man. Congrats on the sponsorship, and the CNC build. You're an inspiration (because of you I have a room filling up with random motors I have found). Whenever I start thinking I have bitten off more than I can chew with a project, I see what you have achieved and it recharges my batteries. I would love to see in depth Solid Works tutorials from you that are live creations of simple solutions, that dive into the "why" of design. Most CAD tutorials are specific in the features they are teaching, rather than focusing on methodology, thought process, considerations, etc... for actually designing something. I feel like your down to earth way of explaining things would make for really interesting instructional design videos. Thanks for the great content.

Awesome stuff, I'm really happy for you and looking forward to the rest of the series!

I was excited to see a new video up! And I'm so happy for you - that is AWESOME!

Good for you, I'm a long time subscriber that always enjoys your vids . . .happy this came your way, you earned it pal . . .good luck

Brother Jeremy love what you have done. I have been working on a similar project for the last ten months, but it's not yet finished. This has encouraged me to keep moving forward. You've made it. I love it.

Awesome video. So glad you were able to build this and that SolidWorks helped out. Keep up the good work!

Brilliant! Will have to check out the Solidworks. Thanks much.

Absolutely stunning - super excited for your next videos

Dude, I love how happy you were, crazy infectious!

Cool! Looking forward to your next installments!

You are a man's man brother. You have a big heart for others and It seems pretty obvious and I appreciate that. Stay humble and do what you do! God bless you Jeremy.

This is seriously amazing! Love what you're doing! Can't wait to see more!

I'm VERY interested in this build. I've been designing/planning a build very similar to this (multi-function CNC) that I plan to start once my shop addition is complete this fall. Congrats on the great sponsorship from SolidWorks. Can't wait to gobble up all of your usual juicy details.

Jeremy, You are amazing, thank you for sharing your passions with the world.

Awesome work, you really accomplish to inspire with these thing you make. Keep up the good work!

Jeremy, I always enjoy your videos and this one no exception. Excellent machine and sponsor! Thank you Solidworks for sponsoring Jeremy on this project so that he can continue to inspire us in KZfaq land!

It seems that Solidworks is just the thing I’m looking for.😁 I love your channel, I found it just as I’m getting back into really building things and with Solidworks I’ll be able to do the impossible and save enough time using it to actually get things done.👍👍

I am excited to see that you are making this using used parts, kinda nice to see for makers or start ups. Im stoked for the new vids

Crazy awe-inspiring! You are the real deal man. Thanks to Solidworks for the sponsorship - now you have convinced me to give them another look!

I just acquired a massive office printer for free via Facebook marketplace. I plan on salvaging the motors, and using them to make a small CNC. I'm really looking forward to this series! Your channel is one of the best educational resources I've found online!

Bro last time I saw you, you were showing how to remove motors from washing machines, now you have built a CNC!!!! Awesome man

I've never been more excited for your videos!

Truly inspiring. Keep up the great work.

cool design.. Love the dual use of router and plasma and the use of the revers side of the gantry. Looking forward to seeing the whole process.

Really excited for you. Congrats. Looks awesome.

So pumped for the build series!

So cool! Congratulations on the build. I'm looking forward to seeing everything.

You are the definition of the American dream, IMHO. 🤛 😁 And you're just getting started. 👍

Speechless! I'm a machinist, and you have blown my mind. Wow

Loved the video Jeremy!

That is BADASS man! Thanks for sharing and I can't wait to check out the build and electronics! I built an MPCNC and want to build a Lowrider2 ASAP, but am thinking to use metal instead of wood so I can use plasma. I never even knew about the 4th rotary axis until this vid, but now I am hooked!

Amazing, can't wait for the rest of the videos!

Never seen you so enthusiastic ! Really looks like a great video series will be watching. No doubt I will get some tips and ideas . To big for my workshop but always a pleasure to watch you and congratulations on your sponsorship I just amazed it took so long for one to pick up on you.

Nice work my friend. What a sweet project.

Awesome! I am very excited to see this build!!👍👍

This is going to be the best #HOWTODIY series on yt! looking forward to it!

absolutely fantastic, find of the year so far, thank you

Awesome project! Thank you for sharing.

Absolutely awesome Jeremy. Another great video.

I'm so happy to see your doing so good man. You seem like a really solid guy! Good luck Jeremy!

That looks like an awesome machine! So happy for you and your new shop.

Great Video, looking forward to seeing upcoming videos on your challenges with this CNC.

Absolutely incredible build. Thanks for sharing.

Well done! Can't wait for the series of videos!

Awesome Jeremy! Congratulations! On the SW deal and the comment from SmarterEveryDay. Can't wait to see the build and all of the projects to follow.

Damn, ... awesome video. Worth the wait. New shop looks great too BTW.

Wow, SolidWorks stepped up and what you built is super cool (like one of the coolest things I've seen in a while). Solidworks for the win. I love the simulation abilities and CAM stuff in Solidworks. one of the best modeling tools there is. I hope SW will bring SW Free to the hobby maker community like Autocad has with fusion 360. Looking forward to seeing the future parts.

I’m really glad to see your channel get the recognition and sponsorship that is well deserved. Congrats!

So glad your back making videos and wow that is one awesome machine.

Super awesome machine Jeremy, way to go! Can't wait to see you're next vid. Always so much valuable information in you're vids ,thanks!

This is some next level stuff. Pretty excited to see your guides on how to hunt industrial equipment.

This project has me so excited! That rotary plasma cutter is something I never even realized was possible. Love the channel, looking forward to the series!

This is such a cool project. I currently have a harbor freight mini mill I converted to cnc and it has been a really fun project.

Well done I'm really looking forward to the rest of this series.

Wow man, you have come such a long way. You are such an inspiration. May many more good things come your way.

Nice Score and awesome rebuild.

Wow Jeremy. That is one amazing machine. Can't wait for the build videos!! Thanks for sharing this!

Great project. Thanks for sharing.