Building this 250R Became a Nightmare... The Story of my TRX250R Drag Racing Build
Рет қаралды 290,615
7 ай бұрынBuilding this 250R Became a Nightmare... The Story of my TRX250R Drag Racing Build
#honda #2stroke #power
What would you change on my 380R to make it faster? Thanks for watching my series!! Drop a like if you enjoyed it and consider subscribing for more content like this! You ROOOOOCK!!! 🤘🤘🤘
PARTS AND TOOLS IN THIS VIDEO - (These links may be affiliate links that I get a kick back for; there is no added cost to you)
Billet Cases - Email 250rcases@gmail.com (Mention my name for 10% off)
DMR Lynx Cylinder Kit -
DMR Cast Intake Manifold - Email DaveMooreRacing@gmail.com
DMR Billet Master Cylinder - Email DaveMooreRacing@gmail.com
SMR Exhaust - Contact @smrperformance329 on Instagram
Gavin Miller Intake - Contact @gavino_01sierra on Instagram
Zeeltronic Ignition - (Code: Sabo10 for 10% off)
Zeeltronic Mount - cuts2.com/qHJEQ (Code: Sabo10 for 10% off)
Billet Clutch Cover - cuts2.com/OYpLz
Billet Stator Cover - cuts2.com/UhlTM
Case Saver - cuts2.com/EMLVy (Code: Sabo10 for 10% off)
Swingarms and A-arms - fullflightracing.com/
Tusk Aluminum Sprocket - cuts2.com/utDEV
M12 Impact - amzn.to/3PfzEKp
Tusk Scissor Stand -
Scale of Doom - amzn.to/45USWut
T-Handle Allen Wrenches - cuts2.com/kSEVT
Swingarm Delrin Bushings - cuts2.com/trkIh
Drag Axles - Contact davemooreracing@gmail.com
Drag Racing Carrier - Contact davemooreracing@gmail.com
Modquad Billet Kick Start - Email 250rcases@gmail.com (Mention my name for 10% off)
Modquad Counter-balancer Holder - Email 250rcases@gmail.com (Mention my name for 10% off)
GPS Billet Lug Nuts -
Tusk Lug Nuts - cuts2.com/vqtlI
Aluminum Pegs - ebay.us/wSyqdN
MEGA Pegs - ebay.us/TwrlYG
Urmosi SBC 720 Bar Clamps - cuts2.com/IGLxH
Urmosi Factory Throttle - ebay.us/Ae2Dqg
ODI Grips - cuts2.com/gTjjh
250R Engine Stand - cuts2.com/EpeHO
SPONSORS/COMPANIES I TRUST
⬇️ OEM PARTS, PLASTICS, BEARINGS, SEALS ETC ⬇️
Rocky Mountain ATV MC - bit.ly/32OHs02
⬇️ POWDER COATING ⬇️
Bonehead Performance Coatings - boneheadperformance.com/ (Mention my name and get 10% off)
⬇️ SUSPENSION ⬇️
Rocket Ron - www.rocketronracing.com/
⬇️ CASE SAVERS & SKID PLATES ⬇️
DRW Performance - bit.ly/34dxWEp (Code SABO10 for 10% off)
⬇️ PREMIUM BAR CLAMPS & THROTTLES ⬇️
Urmosi - urmosi.com/
⬇️ USED PARTS & REBUILD SERVICES ⬇️
Power Sports Nation - www.powersportsnation.com/
⬇️ VAPOR BLASTING & ZINC COATING ⬇️
MotoBlast - www.njvaporblast.com/
MERCH - michaelsabo.com/
Add me on Instagram @michaelsabo350 for Channel Updates!
Companies and Sponsors please contact: michaelsabo350@gmail.com
I own the license to use any and all music in this video.
@single.tracked 7 ай бұрын
Very impressed that you admitted and showed your mistakes as well as the shortcuts you were willing to take to get the bike ready. Obviously we know you wouldn’t normally do things like shave the nikasil, weld the piston, etc. But I think it’s cool that you owned it and didn’t hide it. That’s why you’re one of the best!
@chadriddle3517 7 ай бұрын
Agreed !
@867diesel 7 ай бұрын
thats what i like about it also . it was an experiment to see if he could make it work for the trip . id let him build a race quad for me .
@MichaelSabo 7 ай бұрын
Thank you so much for these comments; you guys are awesome, seriously. Information on shortcuts and techniques/stories of what people did in a pinch can be scarce as I found out when I was looking for info in the midst of my problems with this 250R. People really don't seem to like to admit shortcuts or mistakes. I hope that these videos can help people when they come across a similar situation.
@stevenyoung5504 7 ай бұрын
Man I still need some of your stickers for my 4wheelers and my sons lol
@867diesel 7 ай бұрын
@@MichaelSabo for sure man
@MichaelSabo 7 ай бұрын
What would you change on my 380R to make it faster? Thanks for watching my series!! Drop a like if you enjoyed it and consider subscribing for more content like this! You ROOOOOCK!!! 🤘🤘🤘
@sethhern1460 7 ай бұрын
nah you rock brother keep on keepin on
@MichaelSabo 7 ай бұрын
@sethhern1460 thank you bro!
@MichaelSabo 7 ай бұрын
@fadedlight8596 that only works if the cylinder is designed for a spacer. It would make the port timings off and run poorly unfortunately.
@tedzipoy4460 7 ай бұрын
Some turbo action would be a fun experiment to see you tackle. Some snowmobile junkies have really honed in 2-stroke turbos. You can bring it from snow to sand 😉😉
@tedzipoy4460 7 ай бұрын
Especially with the ability to hone in your ignition.
@angelcelis9090 7 ай бұрын
The 4-5 years since ive found Michael sabos channel i can actually say ive never stopped watching this channel 🔥🔥🔥
@MichaelSabo 7 ай бұрын
That is a major compliment man, thank you 🤘
@ni_wink84 7 ай бұрын
I see why you titled this video a nightmare, but really, considering how many custom mods and how detailed the build is, I think that’s just how it’s goes sometimes, and the end result, wooooo buddy!! That thing sounds like a monster, idles like a high compression 500cc!! Another epic build Mike!! As I will say every single video you make, your attention to details, your ability to make things work and tenacity to finish projects is always amazing! I’ve been waiting to see how this build came out, and just as I expected, it’s a beast!! Awesome video as always man!!!
@-jeffreybollenbach- 7 ай бұрын
Wow man it's crazy how far this quad has come. Love everything you've done to it. Will we ever get a full build video on it like the banshee? Glad you are back man, love the videos
@MichaelSabo 7 ай бұрын
Thank you man, glad you like the journey! A start to finish video? I have a folder on my computer with all the files for that; it's a monster edit. One day... it'll just pop up on my feed 😂
@ronniejarvis2679 7 ай бұрын
The way the pops hit on idle and the instant throttle response. One of the best sounding 2 strokes on the planey
@4thdimensiontravels855 Ай бұрын
You set a new standard for "nut and bolt" restorations. Absolutely the finest you can get. No stone unturned, no shortcuts taken, best of the best parts used make these dream bikes of the internet.hey, that should be a series Sabo, 'DREAM BIKES OF THE INTERNET!' that they are, the tri z my favorite.
@arlo12345678910 7 ай бұрын
Hey Mike, one last comment here at the end. NO SHAME BROTHER! Every single racer who ever lived going back to the dawn of racing of any vehicle ever raced has patched up, modified, harbored, band-aided, fabbed, refabbed, refabbed again, and duct taped their machine in a pinch to get her across the finish line in any place, in any case. Loved watching you improvise, adapt and overcome. GREAT SHOW! Plenty of tme now to order a new piston, send out the head for re-lining and adjusting gear reatio and tune for a reliable, top of the line winner!
@haydent1000 2 ай бұрын
I'm 52 as well.Growing up I was rough on my toys so it was either fix em myself or do without.I didn't realize how much it would help me throughout life.
@commentpulling 7 ай бұрын
Glad you are back!!👍🏻 Hope things are getting caught up in the shop. Can’t wait to see what’s coming. Thanks Mike for what you do!!👍🏻
@johngereny2086 7 ай бұрын
Man it’s crazy to watch this and be almost as excited as you are when you finally start it and run it! Love it bro, you always are a great push for me to get to work on my stuff. Love the content keep it coming!
@diyathomevn 7 ай бұрын
Very impressive when you admit and point out your mistakes. Obviously we know you wouldn't normally do things like nikasil scraping, piston welding, etc. But I think it's great that you own it and don't hide it. That's why you're one of the best! Oh my god, how far this foursome has come. Love everything you did with it. Glad you're back, love the videos
@tedzipoy4460 7 ай бұрын
Been missing your content! Welcome back 😎 The build came out great! Always learn so much from these videos.
@MichaelSabo 7 ай бұрын
Awesome to hear that and thank you for waiting to watch this one man!
@samphilipp4997 7 ай бұрын
Thank you man for the best and hard work 👍
@Trx363R 7 ай бұрын
Great to see the video man!! Thank you for the product unboxing on the intake. Glad you like it!!
@MrAndyloz 7 ай бұрын
wow you really went through it on this build ...kudos for showing us all the problems along the way
@ledthrax 7 ай бұрын
Another great build and excellent video! I appreciate that you always keep it real and show the issues that you run into and you’re honest with everyone. Keep up the great work Mike!
@bansheeman213 7 ай бұрын
Years back we were all heading out to a big race around 2 hours away. My buddy still hadn't finished his bike so he decided to ride inside the enclosed trailer to finish working on his bike. We get to the race and open the door to see a very sweetie and motion-sick beast of a man but he got the bike done in time.
@MotoDoc304 7 ай бұрын
Buddy in the red hoodie when you started it for the first time his face went to pure joy. Not even his bike and i could see how happy he was. Thats real love for what hes does.
@Sunspot-19 3 ай бұрын
Resourceful... Resourceful is where this is at. Finding solutions, no matter the situation. Good on ya, Mr. Sabo!! Your "we got this" attitude also brought goodresults. Now, that mosheen is like a big block Chevy in a shopping cart... Enjoy it and be safe out there! 😁
@itsmeitsdrew 7 ай бұрын
love the fact you threw this vid together showing the issues man - im just learning how to build (really watching your vids is half of my schooling :D ) and its just humble and effing love it keep the humility brah! keep the vids and builds comin!!
@KWEnduro 7 ай бұрын
What a great build! That intake and exhaust are works of art. Glad you got there in the end. Great content as always. Keep your head up, you should be proud of yourself.
@jjsfitnessgoals4898 7 ай бұрын
That engine sound is amazing, best 2-stroke engine I’ve even heard
@johncordova2089 7 ай бұрын
After the last 250r video I had to order one of those exhaust pipes and after hearing it today I can’t wait for it to come in!!! Thanks for the awesome 250r content
@MichaelSabo 7 ай бұрын
Awesome to hear man; Scott at SMR is the man! Please let him know where you heard of him!
@redwatts805 7 ай бұрын
Awesome!! I have been waiting for this episode!!!!
@priyamunera7518 7 ай бұрын
What an insane video.! Congrats on this build, your videos are amazing, man!
@jaypers232 7 ай бұрын
The sound is just absolutely pure.
@user-nx9xl7pp5x 5 ай бұрын
Awesome build. Can't get over that sound.
@lypheEddie 7 ай бұрын
Split video with the wheel turning is a great idea! Glad to see another video of yours!
@Charles53412 7 ай бұрын
That really did turn out great Mike ! It was beyond what I expected for sure ! Oh, and don't beat up on yourself for the mishaps on the build, you know as well as anyone of us, it doesn't always go smoothly, which in turn allows our minds to be creative and fix those issues that arise such as you did on this build. Dude, it's another Two BulTacos on the build !
@JonathanVee 7 ай бұрын
Man, I felt that struggle! Recently I have been pushing hard to get my dirt bike running before the snow arrives. It's been in pieces needing a new head, valves, and a piston for the last 12 months. KTM parts are back ordered like you wouldn't believe. Anyway after finally having all the parts and getting the engine back together for the first time since last fall, I had the new piston pin seize in the rod 5 minutes into the first test ride. So I took it home are tore it down again. I decided to put the old piston back in to confirm that the new piston was the issue. Then, during re-assembly the timing chain tensioner threads decided strip out (despite using a torque wrench) halting progress for yet another week. All I've been doing is tearing this engine down and putting it back together over and over for the last several weeks. Sadly, before I could get it going I ended up having knee surgery and had to put the bike away for yet another winter in pieces. It's been painful to say the least. Anyway, it was good to see you get a win, it made me smile! Great video as always!
@867diesel 7 ай бұрын
that sucks dude . prayers for a fast recovery on the knee and the bike for next spring
@MichaelSabo 7 ай бұрын
Man, sounds like you're getting put through the ringer with that KTM. I guarantee you're learning a lot doing that and dealing with abnormal problems. It's a bitter sweet, but in the end, there is good that will come from that in my opinion. I hope your knee has a 100% recovery and you get back to riding before too long Jon!
@JonathanVee 7 ай бұрын
@@MichaelSabo Thanks Mike! Yes, I am learning a lot, it's been a 4-stroke education cram session! lol. I'm looking forward to the spring time with a good knee and a running bike! I'll be tuning in to your channel this winter as always!
@JonathanVee 7 ай бұрын
@@867diesel Thanks man, I appreciate it! Spring will be a good time!
@867diesel 7 ай бұрын
@@JonathanVee right on
@alban_nl487 7 ай бұрын
In France when we build tuned 2 strokes for 50cc mopeds we always do a « montage à blanc » to double Check if all the aftermarket/modifed part come along with the others ones, You still made the best content on YT Its normal to make mistakes ! Your projects are amazing sabo
@coachcutz 7 ай бұрын
This thing is sick man! I LOVE the build videos. Hoping for more riding videos next season as well. You the man Sabo!
@brianfalkner108 7 ай бұрын
Just wanted to say i have alot of respect for you because you showed all your mistakes. We all been there and still do make mistakes.
@awesomeproducts1582 7 ай бұрын
I’ve been waiting for this video forever 😂 love the content man keep it up!
@joeyholthusen6495 7 ай бұрын
I currently own and built my yamaha raptor 770cc it even has a plus 3mm intake valves and plus 2mm exhaust valves 105.5mm cylinder and piston plus 5mm stroker crankshaft efi controller with many other things. I prefer 23x7 up front and 22 inch rear tires plus its geared to the moon. Still hits the rev limiter on top. 😅 thanks for the content awesome builds, and fun to watch. I also modded my daughter's Yamaha blaster, stock was around 55mph or so, now it tops out at around 70mph. Its at the limits of pump gas for compression, full port n polish even worked over the transfer ports. 34mm intake and mikuni 34mm carb, tapped with the oil injection. Its geared up on the front sprocket and went a little smaller size out back. Also went with 23x7 up front and 22 inch tires out Back. In a drag race for two high line pole lengths it will eat a Polaris scrambler 400 2-stroke, until it runs out on top. My daughter absolutely loves riding. She is 20 years old. I didn't want her riding a big heavy atv like a Polaris sportsman 500 that weighs around 800 pounds. To me thats way more dangerous of she was to roll over. 320 pounds wet weight blaster is easier to kick off from a roll over. I also freed the intake and exhaust on the blaster. Been thinking about maybe getting another blaster frame to build that YZ500 yamaha blaster. Hmmm 😉
@bigchugus6923 7 ай бұрын
Just finished the vid, great video man keep up the good work! So exited to see that 380 and it was worth the wait
@Reynardventer 7 ай бұрын
Well done... I was so excited to watch the video and loved it... The fact that you can show your mistakes and man up to it shows the tipe of person you are... And the fact that you can show what you did wrong and how to fix it and what's the can work maby way and the right way makes you way much more than just a guy in his garage but more than a teatcher we're every one can learn something or everything.... Keep up the good work love your content.. Can't wait for the next video even if it's 3 ouers 👌🏻
@chadriddle3517 7 ай бұрын
Awesome series Mike
@MichaelSabo 7 ай бұрын
Thank you Chad!
@dema669 7 ай бұрын
tough man fr you made accident after accident it happens to everyone and i feel you I'm glad that you were able to get over it and fix your mistakes
@chrisyeahbuuwassrileegowyn9279 7 ай бұрын
Another great video, as always the real deal where others would edit out any mistakes. Great content because of hard work and dedication as always!✌🤘
@SethKelley92 7 ай бұрын
Love your videos man!!! the attention to detail especially when it comes to weight savings and inertial mass is awesome to see!!!!!!!!!!!!! Keep up the Awesome work!!!!!!!!!!!!!!
@MichaelSabo 7 ай бұрын
Thank you man; glad you enjoyed that! 🤘
@keithkeller698 7 ай бұрын
My 250r just developed a rattle similar to your topend noise.. I pulled the counter balancer and I'm sending it to Dave moore for him to rebuild. I'm also probably going to freshen up the topend. Nice build man.
@johnhicks735 7 ай бұрын
You should have it re nickel celled again Michael. It will work by honing it out to cross hatch etch it inside the cylinder bore good. That's the main part of it. After you hand sand it really good.
@johnhicks735 7 ай бұрын
One big thing about that piston skirt shaving is to bring it up to top Dead center first. T hen use A tool called A awl scribe. To score the outline of that area with them go over it with sharpie marker. I always make two lines the main cut line and what's called A over kill line for lead way.
@johnhicks735 7 ай бұрын
That gives you room to work with and I highly recommend practicing on A old one first.,or A cheap new one. Cause your right about one part of it you really shouldn't try to.,or can't put back what's been cut off to get the right compression stroke in that engine. I highly recommend changing it out with the exact piston to with A new one again. As A fresh rebuild. Just remember about the top dead center trick tip first. Then scribe it out and double line mark it. And take some where to have it lathe cut down to size. Leave both lines on it gives you lead way to. For more compression and power stroke that way doing like that to out of the piston. Without totally ruining it. That other piston is off balance and Intrude.,or I call it un- trude. That's what's causing the noise and vibration to.
@joelatkinson2080 7 ай бұрын
Another great video!!!
@chevy43 7 ай бұрын
Awesome video. I’m got the same problem with my tank cover not the gas cap seal all the way up
@skyfreakwi 7 ай бұрын
Dude... I had a KE125 as a first bike and the piston skirt busted. Big ol chunk came out and got jammed in the bottom end bearing. I cleaned it out put it back together and it ran! The cracking skirt became a running theme on this bike. I just kept clearing it out and slapping it back together. (Like every day!!!) By the end it looked like a formula 1 piston. The skirt came up to the bottom ring so it was partially floating... This is a rotary valve intake motor so that wasn't an issue. The ENTIRE exhaust port being open to the crankcase also wasn't an issue surprisingly enough. The damn thing ran better that way I think! I ended up selling it running, with a quarter piston. Also if your rod was too short you'd be low on your deck height. so odds are your crank is stroked out excessively. Not sure if you ordered a stroker crank... You got one now though so stack up some base gaskets and open up the bottom of those ports! (Do that before replating...) Maybe your onto something, more CC's fo-sho!
@Shadowz_660R 7 ай бұрын
Been patient waiting for this video for a while. Needed a pick me up today. Happy for this video.
@MichaelSabo 7 ай бұрын
I appreciate you waiting and glad it could be a pick me up for you 🤘👊
@Shadowz_660R 7 ай бұрын
@@MichaelSabo Thanks Mike. Great job on the 250R It came out super sick bro.
@Lracer61 7 ай бұрын
I appreciate seeing the struggle, lessons all through out this one. Great video!
@MichaelSabo 7 ай бұрын
Glad you enjoyed the journey man!
@jbplays7302 7 ай бұрын
Michael, I have to admit, I'm like alot of the other guys that feel like you should have kept the 250r in it's MX form. But this is your channel, and YOUR quad, and you wanted a drag bike. So, I respect that! And frankly, it's a SWEET looking machine!!! The motor itself is really a work of art! I've built some really nice XC race yfz's and 450r's in the 20+ years I've been riding and racing quads. But I've never done anything that comes anywhere even close to your 250r! That bike is just MEAN AF LOOKIN!!! Dude, the sound of your voice twice in this video is ABSOLUTELY PRICELESS!!!!!!!!!!!!!!!!!! 1. When you first romped on it, and felt the torque that bike puts out, you were so excited!! You sounded like you just might piss yourself!! LOL! 2. At about 1:09 you wound it out, and started grabbing for the front brakes, which weren't there anymore! And for a split second you thought you were either going to have to hit the "eject" button, or you might be going for a swim in that creek! Hysterical, only b/c you didn't wad it up!! Awesome video Sabo!!
@Therealmxloui 6 ай бұрын
I love your videos I just found your channel pretty recently I’ve put so many hours into watching your videos and learning Thank you for making some dope content 👍
@ralphvasso7209 7 ай бұрын
Finally a sabo video. Let’s goooo
@halfnelson6115 7 ай бұрын
This is the only KZfaq chanel with lomg form videos that i actually watch the whole video. Mike's videos hold my attention throughout the vid. Great content.
@MichaelSabo 7 ай бұрын
Very big compliment man, thank you.
@christopheravery5808 7 ай бұрын
Man, with all the money you have spent on quads you could have gotten a used LRD aluminum frame to build a drag bike. It is a lighter frame, then you could have still had the m309… imagine how sweet that would have been that to have 2 R’a, one for riding around with the guys and one that would have been a pure drag machine
@MichaelSabo 7 ай бұрын
For sure would be cool man! Not sure if you've seen my video on 250R frames, but the LRD aluminum frame isn't as light as you'd think - kzfaq.info/get/bejne/qs5lbJaAzKjKd40.htmlsi=JC18E0W8o0_YlftY
@jt3963 4 ай бұрын
@@MichaelSaboThat’s nice to know. I always thought it’s lighter. I have been planning to build Trx250r with BRC 500 2-stroke engine. My goal is 70-75hp. I think it will be nice to nice with that 500cc primal torque.
@AlphaOffroad859 Ай бұрын
Mass props for showing all the mistakes. There was a lot don’t get me wrong but takes balls to show all the mistakes. Quick note, when you do a stroker crank alot of the times it requires a specific piston due to the longer rod
@williamneske6452 7 ай бұрын
Oh man, am i excited for this!
@AKSchlahtO 7 ай бұрын
By the way. Ive been checking daily for this video Michael. Thank you for your content.
@treytoshaglover9507 7 ай бұрын
That has to be the throatiest 250R I have ever heard. Kudos to not giving up!!!
@shelbyraines234 5 ай бұрын
You were down in my part of the country,great content as always God bless
@victorgerhardt1504 7 ай бұрын
Great video! That motor has a BEAUTIFUL SOUND!😊
@MichaelSabo 7 ай бұрын
Thank you Victor - in person is even better!
@edwardconway7281 7 ай бұрын
Liking the solo camping as I also do quite a bit of it. Fun to see others enjoying Gods creation, and their experiences Great video!
@adamgoodell123 7 ай бұрын
great pod cast, im impressed. very entertaining. not so much on rebuilding stuff. i get it.
@timmydavis6624 7 ай бұрын
Very excited to see the new content and i love my bcg shirt i didnt know it said" i helped save a sport quad" love the marketing brother 😅 you da boss sabo keep killing the game! I got some more done to the yz too!
@MichaelSabo 6 ай бұрын
I appreciate the love Timmy! Thank you for supporting by repping my merch. Glad to hear you're getting work done on your YZ 🤘
@richknight7307 7 ай бұрын
Oh snaps sabo is back let’s go love this build bro so sick
@MichaelSabo 7 ай бұрын
🤘🤘🤘 thanks brotha!
@L.O.C.1990 5 ай бұрын
What a sicc build love 250Rs
@charlesloyd1970 7 ай бұрын
Where there's a will there's a way. Sick engine.
@dylanouellet296 7 ай бұрын
I have waited patiently for this video. Glad to see you had a success. Personally I love the mx setup on this quad over the drag setup but that’s just me. Keep these awesome videos coming. I can’t get enough of the hilarious skits you do through your videos too, keep slam dunking shit in that trash can! Booooom
@michaelmitchell5909 7 ай бұрын
That was absolutely bad ass man. Never seen anything like that. Loved every second
@MichaelSabo 7 ай бұрын
Thank you for the feedback; glad you enjoyed it!
@bobvandusen1832 Ай бұрын
Your great at what you build and having the most fun doing it then you get to RIDE!!
@freetoride003 6 ай бұрын
look man. a lot of us have been right there. props for your quick thinking and adapting in a pinch. this is how we learn brother...also the cylinder is ok the gap wont be any different then the ports
@user-bi3if4sw8f 6 ай бұрын
I literally never did a break in. I build em and rip em instantly every time, and thus far, I've never once had anything go wrong.
@garagemcmatt 7 ай бұрын
Hell yeah been waiting for this video
@MichaelSabo 7 ай бұрын
Thanks for watching Matt!
@garagemcmatt 7 ай бұрын
@MichaelSabo always love to see the builds. Your 426ex build video is what made me start doing my stuff on here too.
@blessedinjax 7 ай бұрын
I see why we haven’t had a video in so long my boy is burnt and beating himself up trying to get the 250r built in time It’s all good homie we all make mistakes glad your back
@MichaelSabo 7 ай бұрын
Much appreciated man - I was indeed burnt out there for a minute; it's time to get back on the horse!
@ksboi29 7 ай бұрын
Amazing work! Thst exhaust is amazing
@MichaelSabo 7 ай бұрын
Thank you!
@Raptor_Ruckus 7 ай бұрын
Watched the whole video, it kept me on the edge of my seat the entire time!
@miketee2444 7 ай бұрын
I cant say this for every motor but many in history have uncovered the exhaust port on full top stroke. On a Merc outboard some do and some dont but it doesn't change performance much oddly enough. It can be just as likely to help stuff the case when the pipe echos back. Im sure these R motors have been dynoed enough over the decades to know what the verdict is.
@davidwinn5733 5 ай бұрын
Keep up the good work 🤛😊
@seanmarchiny 5 ай бұрын
We all make mistakes, it’s all about how we can be men and admit them and not be too embarrassed or ashamed or full of pride. I swear we would get along so well and could really build some stuff! Keep up the good content. Life long follower you have made me my friend!
@kayejaye261 4 ай бұрын
Dig the new design. Suzukis were my favorite. Yellow and blue my fav color scheme. Thx for great vid.
@tommyamaya4254 7 ай бұрын
That is sweet Sabo 👍
@randycassidy198 6 ай бұрын
Finishing motors at the track has always ended up in peril for me. I blew up a 400 Yamaha that I just put the 440 kit in, because of rod stretch. It ran perfect until I really got on it and then the inevitable bog. It never made a bad sound though
@dulebrothers2850 7 ай бұрын
Love the vids
@jeffchidester855 7 ай бұрын
Good job bro. Youve been killin it for a while now
@jadryanrosario403 7 ай бұрын
I had a similar experience with my 89 Blaster, my sleeve had a crack in the same exact spot on the transfer port and it somehow has ran for over 8 years on the same sleeve no problem!😂
@MichaelSabo 7 ай бұрын
I think a lot of times, we worry about stuff like that, but its not actually as serious as we think. But then again, it could totally tank an engine 😂
@mrblaze8191 7 ай бұрын
Man that thing sounds great and that pipe is sick and air filter sick man she a mean machine
@jsvallee567 7 ай бұрын
far from the first time you got it what a beast !!!
@minibikemadman 7 ай бұрын
it was only half sends really. It sounds great im going to look into one of the smr pipes for a small bore before i goto a 363 or so.
@johnbryner9052 7 ай бұрын
Been missing ur content buddy! Great perseverance and I appreciate u showing us everything also, good and bad, but it always looks awesome when it’s done. I really liked that sound, it sounds so nasty! 👍
@MichaelSabo 7 ай бұрын
I appreciate you hanging while I was making this! In person it sounds very very good man!
@wyattguttery9614 7 ай бұрын
Awesome video man, been waiting for the next mike sabo upload. Always ready for the next 🤙 keep going man!
@MichaelSabo 7 ай бұрын
I always appreciate the love Wyatt! 🤘
@jefferybye2169 7 ай бұрын
The struggle is real..i greatly appreciate you showing us the mistakes and complications Sabo. Hey were all human dude and shit happens.. I have more respect for ya showing us all of it.. Instead of fast forwarding fast it all like alot of other people on here doing mechanic work.. You rock Dr.Quad 🤘
@MichaelSabo 7 ай бұрын
All part of the game! I'm glad you enjoyed watching the struggle and thank you for the feedback!
@arlo12345678910 7 ай бұрын
1:07:02 That thing sounds so ALIVE man! CRISP!!!
@DerredmaxTRIAX 7 ай бұрын
Awesome video Mike, can't wait for the Vette series..
@MichaelSabo 7 ай бұрын
Glad you enjoyed it Derred! Thank you for watching 🤘👊
@rexg5807 7 ай бұрын
I died a little inside when you switched to a drag machine, but it is still an amazing machine. That thing sounds amazing. Thanks for the great content and keeping us all entertained. You can skip leg day after kicking that beast. 😂😂😂
@minibikemadman 5 ай бұрын
ya gotta get it on the dyno..i plan to do mine when its together. Only difference is my vortex cdi and vforce 2s and a 38mm pwk non air stryker. Does mod quad sell the rear brake resie?
@emmettvonflue1827 7 ай бұрын
This is the craziest engine build I’ve ever seen hopefully it works out well😅
@0-01 7 ай бұрын
We wait a long time to see this video man thank you for your insane work hope you keep post like these build in the futher have fun Michael
@MichaelSabo 7 ай бұрын
I appreciate you waiting while I made it! Thank you for watching man 🤘
@thatquadkid 7 ай бұрын
That was a crazy engine build with all the problems you have it was a awesome video!! I got a question how do you break in your 4 strokes I have a ltr450 that I’m building and I rebuilt the whole motor like new crank, piston, bearings etc. it’s all most done just don’t know how to break it in. Thanks man you are the best
@bigbullhorn8443 7 ай бұрын
Hot cold hot cold hot cold a bunch of times. 5mins,15mins,25mins. Then Send it!! Goodluck
@ginopietropaolo1017 7 ай бұрын
That thing sreams man awesome
@purebloodheretic4682 2 ай бұрын
Respect owning your mistakes - we're all human but few have the integrity to keep it real! 🇦🇺💪
@ryonangelvich3874 7 ай бұрын
Love the quad man
Michael Sabo
Рет қаралды 350 М.
Michael Sabo
Рет қаралды 902 М.
Michael Sabo
Рет қаралды 193 М.
Stupid Fast John
Рет қаралды 108 М.
I Finished A Video Game
Рет қаралды 6 МЛН
D.S MAGIC TV
Рет қаралды 23 МЛН