Built-in BBQ - Outdoor Kitchen

Рет қаралды 511,409

5 жыл бұрын

Built-in BBQ creating an outdoor kitchen. We used resawn lumber to match existing patio cover, poured solid concrete counter tops with a cantilevered bar, veneered with stone and covered with corrugated sheet metal roof.
Concrete tops were wet sanded with diamond pads to give a smooth finish and then were custom stained for a faux stone look.
This video is done in time lapse to show the build which took about ten days to complete.
It helps if you buy the stuff we use:
Canon EOS R : amzn.to/3dlU2nu
3M Accuspary system; amzn.to/3dlXsH8
General Finishes conversion varnish satin: amzn.to/2AoskYV
General Finishes conversion varnish semi-gloss: amzn.to/3gDv2u3
Blum Drawer Slides : amzn.to/2XGcqB0
Blum Half Overlay Hinge: amzn.to/3cbYCn6
Blum Hinge Pocket Jig: amzn.to/36M7PRY
Walnut Edgebanding: amzn.to/3eyXcV9
CA Glue: amzn.to/3eyb2XV
Kohler sink: amzn.to/2zBMDlF
Corob Cutter -amzn.to/2yMkzLK
Murphy Bed Hardware - amzn.to/3ciLpsG
Freud Rail and Stile Kit - amzn.to/3gAtUHz
*Disclaimer - As an Amazon Associate I earn from qualifying purchases.
Contact:
Facebook: / oldguywoodworks
instagram @oldguywoodworks
Etsy: www.etsy.com/shop/OldGuyWoodw...

Пікірлер: 157

@tiencothern5770 Жыл бұрын

For me, the ideas in kzfaq.infoUgkxy_pn55PK60wAV3X_C_RoLS_67mNonoCE Plans were a starting point for building different sheds . Ryan gives ideas that allow an individual to draw nicest conclusions into the design and building of his or her own shed.

@OldGuyWoodworks Жыл бұрын

Bottom of shed?

@kevinwright6015 3 жыл бұрын

Incredible work my friend! Looks amazing.

@OldGuyWoodworks 3 жыл бұрын

Thank you! Cheers!

@ddksmp 4 жыл бұрын

Holy shit!!! Awesome job!!!

@OldGuyWoodworks 4 жыл бұрын

Thanks for watching.

@raider1978raider 4 жыл бұрын

Clean!!! 👍🏽

@OldGuyWoodworks 4 жыл бұрын

Thanks for the compliment and for watching.

@paulc7572 3 жыл бұрын

Very nice looking, love the roof

@OldGuyWoodworks 3 жыл бұрын

Thanks for watching. Us too!

@dansklenicka8403 4 жыл бұрын

Nice, I agree getting old for projects, but I hate paying someone for something I think I can do. Enjoyed the video !

@OldGuyWoodworks 4 жыл бұрын

I hate to pay anyone to do anything I know I can do. Thanks for watching.

@jeffhennings6015 4 жыл бұрын

Love it

@OldGuyWoodworks 4 жыл бұрын

Thanks so much for the compliment.

@dn1084 3 жыл бұрын

Very nice thanks for sharing your video.

@OldGuyWoodworks 3 жыл бұрын

You are most welcome. Thanks for watching.

@nimajnebrm 2 жыл бұрын

Great video!

@OldGuyWoodworks 2 жыл бұрын

I'm glad you liked it. Thanks for watching.

@davidjiron32 3 жыл бұрын

Nice job!

@OldGuyWoodworks 3 жыл бұрын

Thank you very much and Semper Fi!

@beatrizsepulveda9678 2 жыл бұрын

Muy lindo, me encanta la construcción, saludos desde Limache Chile.

@OldGuyWoodworks 2 жыл бұрын

Gracias.

@donaldamlaw1266 3 жыл бұрын

impressive build

@OldGuyWoodworks 3 жыл бұрын

Thanks for watching. I’m glad you like it.

@Chaspickle 3 жыл бұрын

Very Nice!!

@OldGuyWoodworks 3 жыл бұрын

Thanks for watching.

@OldGuyWoodworks 5 жыл бұрын

I sure am glad I got to do this in the heat of summer.

@Kgio-2112 3 жыл бұрын

I built my outdoor bar/kitchen in june/July of 2017. I got baked

@OldGuyWoodworks 3 жыл бұрын

k Gio you think of with all the years of my maturity I would know better

@georgetreheles7921 4 жыл бұрын

I wasn't a big fan of corrugated metal roofs, but you actually made it look non-ghetto, thanks, I will use it at my place, hopefully I wont get any complaints from the folks at the airport.

@OldGuyWoodworks 4 жыл бұрын

I was in complete agreement with you until my son talked me into it. I would do it in a heartbeat. Especially you can give them faux finishes of all types. Thanks for watching.

@MortgageEasy 4 жыл бұрын

Fantastic Kitchen I sure wish you would have went into more detail about all the aspects of the build. Plan to build using same techniques and detail would have helped.

@OldGuyWoodworks 4 жыл бұрын

I may do a another one in the near future with a lot more detail. I have found when I do too much detail retention on my videos drops off significantly. I appreciate your input. Thanks for watching.

@BZFilms 4 жыл бұрын

good job

@OldGuyWoodworks 4 жыл бұрын

I appreciate the compliment. Thanks for watching

@jp-pu7em 2 жыл бұрын

Love this project! Definitely would like something like this in my yard. Quick questions. What's the overall soze of the roof structure? Also were those posts just 4x4's wrapped in 2x6's woth 2x6's spaining the top supporting the roof?

@OldGuyWoodworks 2 жыл бұрын

If I remember correctly, the cover is about 12'X12" square. We did use 4X4 posts and wrapped with both resawn 2X6 and 2X4. resawn 2X8 for the double header and 2X6 rafters.

@jasonstarr6419 4 жыл бұрын

Yep. getting too old for this stuff.. redid my back deck this past summer (2019), added a metal framework and roof, 10' at the eaves, 12' at the center, over an 18' x 20' deck. all tolled, took about four months (videos on my channel, nothing fancy). Took lots of pain killers. Could sure have done with borrowing your young guy! lol.. Yours looks great, jealous of your kitchen. Still no cooking on mine yet. Keep 'em coming!

@OldGuyWoodworks 4 жыл бұрын

Those young guys do have their uses. Thanks for watching.

@ZZz3rDeYezZZ 3 жыл бұрын

A M A Z I N G J O B !

@OldGuyWoodworks 3 жыл бұрын

Thanks for watching.

@i957corvette 4 жыл бұрын

Thanks for the video. I am looking to do one this summer. What type of metal studs did you use? Are they galvanized or something to protect it from the elements since it’s outdoors?

@OldGuyWoodworks 4 жыл бұрын

Whatever we bought at Lowes. I think they are galvanized. Don't wait too late into the summer. I paid that price. Thanks for watching.

@seanketterling1302 4 жыл бұрын

Strong work. What size is the structure and what size lumber did you use for beams and rafters?

@OldGuyWoodworks 4 жыл бұрын

12' X 12'. Resawn 2X8 for rafters, ridge, cross beams and fascia. Thanks for watching.

@yourontheair 4 жыл бұрын

great

@OldGuyWoodworks 4 жыл бұрын

Thanks!

@bobmedley7513 2 жыл бұрын

Question: How did you set your post? Anchored to the concrete or dig a footing?

@OldGuyWoodworks 2 жыл бұрын

Slab already existed. We just anchored to the concrete with the excpetion of the ones mounted on the wall.

@panic-revv85 4 жыл бұрын

Why didn't you scratch coat before you applied the stone? I'm a mason by trade so I've got to ask.

@OldGuyWoodworks 4 жыл бұрын

Thanks for watching. We used artificial stone which as you know is pretty flat on the back side. We used thinset mortar to stick to the cement board.

@gregemmett638 4 жыл бұрын

how does the smoke off of the pellet grill vent out of the roof?

@OldGuyWoodworks 4 жыл бұрын

It vents out underneath the cover. It's pretty open, so it hasn't been a problem. Thanks for watching.

@firecosman 5 жыл бұрын

Nice job Brad! I think its called temperature exaggeration.

@OldGuyWoodworks 5 жыл бұрын

Don't be a hater!

@AfrikQ10 3 жыл бұрын

This is nice,but we need more surface area, no bar settings, a space/ cupboard to store silverware and dishes,like plates. A spacious stove top or two for that matter. A nice BBQ smoker and grill. ( the rest I dont know if possible) however let's keep in mind where this is and it is outdoor....but this looks like a nice design.Dont forget the kitchen sink, a double sink.

@OldGuyWoodworks 3 жыл бұрын

Noted! The limitations are the amount of space you have available. And money. Thanks for watching.

@AngelSotelo661 4 жыл бұрын

Nice work!!💪🏼 I’m impressed! What’s the estimated price this project ? Would like to do one in my own in my back yard soon

@OldGuyWoodworks 4 жыл бұрын

We had the BBQ and smoker already and the slab had been poured. Our cost (free labor) was between $4000-$5000. If you had someone build this it would be between $15,000 and $20,000.

@user-kb4bm9cg2x 2 жыл бұрын

The wooden posts seem much bigger than steel cylinders. Why did you prefer to use wood instead of metal for the barn frame?

@OldGuyWoodworks 2 жыл бұрын

I don't normally work with metal.

@jesusgodinez8751 4 жыл бұрын

Nice work! What gauge is the metal studs?

@OldGuyWoodworks 4 жыл бұрын

I'm not sure. It's what was available at Lowe's. Thanks for watching.

@BD-tn5um 4 жыл бұрын

Looks freakin awesome . Two questions. What do you set the pit on, was it a cement board. Also how far apart is each gable

@OldGuyWoodworks 4 жыл бұрын

Thanks for watching. yes, the pit is set on cement board (Hardie board). The dimensions of the roof is 10' X 14'. The BBQ Area is 10' X 10'.

@billhealy4188 4 жыл бұрын

what did you wrap the posts with?

@OldGuyWoodworks 4 жыл бұрын

We used resawn 2X8Doug Fir to wrap the 4X4 which were pressure treated. The larger resawn left a space so we could run electric for overhead lighting. If it had stone on the posts we would use black paper (felt) and then cement board.

@popsthemachine247 4 жыл бұрын

All that work, I would of put a better roof than that. At least some shingles. So how much did that cost? I did like the set up for a small area it was in. Good video thanks.

@OldGuyWoodworks 4 жыл бұрын

The roof was part of the design the young guy wanted. We had a lot of the BBQ's and applainces. I want to say it was in the $4,000 range. Thanks for watching.

@pangelo4023 4 жыл бұрын

Old Guy Woodworks $4,000 that’s not a bad price. They wanted to charge me $20,000 to just add a patio to my backyard. They told me that it would be way cheaper if I just had the patio built that’s not connected to my house.

@danielgarth3806 4 жыл бұрын

Came to see some wood working. Didn't see any wood. Stuck around anyway and learned some things lol. Sometimes you just get lucky.

@OldGuyWoodworks 4 жыл бұрын

I'd rather be lucky than good. There was some woodworking, not as much as my other videos. Thanks for watching though.

@danielgarth3806 4 жыл бұрын

@@OldGuyWoodworks Oh def. It came later on, and actually got me thinking about how I could learn to work with other materials and open up more possibilities for myself. So thank you.

@OldGuyWoodworks 4 жыл бұрын

Glad to be of assistance.

@skipmagil 3 жыл бұрын

I didn’t see any sheet metal either

@ShaneZettelmier 4 жыл бұрын

Lol. Omg. Doing concrete would be so much easier 3 feet off the ground like that. That looks awesome, I want one now. 😛

@OldGuyWoodworks 4 жыл бұрын

And when a young guy does all the lifting. Thanks for watching.

@johnpleszewicz293 3 жыл бұрын

what did that outdoor kitchen cost approx with roof minus appliances

@OldGuyWoodworks 3 жыл бұрын

Hard to say with all the "free" labor. I am guessing about $8,000.

@user-br4mp6lv3s 4 жыл бұрын

A nice ceiling fan would be nice in the future

@OldGuyWoodworks 4 жыл бұрын

We built this for my son. I think he has that in mind. Thanks for watching.

@chaunceypullman3380 4 жыл бұрын

Like the build. But why wasn't the overhang built out more for rain purpose. I mean the people would be dry sitting on bar stools. I hope ceiling fans were installed afterwards to cool down the heated metal during those hot summer days.

@OldGuyWoodworks 4 жыл бұрын

Nice observation. We considered that, but didn't want to go lower because of head clearance at the fascia. It doesn't look like it, but the fascia is down about 7'. So far it hasn't got that hot under the cover, but we do have the electrical pre-run just in case. Thanks for watching and the comment.

@hadyrome5574 4 жыл бұрын

Old Guy Woodworks Couldn’t you have done the roof in two different slopes? So the one over the bar would have a smaller incline, so that the fascia would still be at desired height? I like the use of the metal studs vs wood.

@OldGuyWoodworks 4 жыл бұрын

We could have done that and did think about doing that, but the overhang would have come out to far for our liking. Thanks for the input.

@donkiko6708 4 жыл бұрын

That’s what I want to do at my back yard

@OldGuyWoodworks 4 жыл бұрын

I hope you are inspired. Thanks for watching.

@CL-oc9bg 4 жыл бұрын

How much would something like that coast?

@OldGuyWoodworks 4 жыл бұрын

We had the BBQ and appliances already. Lumber for the cover was about $2,500. Concrete and roof was around $400-500 Built this for my son. He paid all the bills. I'm just guestimating. If you had a contractor do this it would be in the $15,000 range. Thanks for watching.

@RYANKITCHENJW 4 жыл бұрын

I like'❤️

@OldGuyWoodworks 4 жыл бұрын

We appreciate that. Thanks for watching.

@TheBoss-gc1uk 3 жыл бұрын

Nice 👍. Where does the sink drain to?

@OldGuyWoodworks 3 жыл бұрын

Good question! I wasn't there for the plumbing part. I've done them where it goes into a dry sump, but it's only for rinsing.

@susanbishop2798 3 жыл бұрын

Nice job! What was the roof pitch?

@OldGuyWoodworks 3 жыл бұрын

It was 5 in 12.

@florbrad 4 жыл бұрын

awsome build man you look like BTK

@OldGuyWoodworks 4 жыл бұрын

Glad you enjoyed. Thanks for watching.

@Kgio-2112 3 жыл бұрын

He does not look like btk. Go see an optician

@AfrikQ10 3 жыл бұрын

@OldGuyWoodworks 3 жыл бұрын

Great idea!

@muds0369 4 жыл бұрын

Nice work but would be like an oven under that corrugated steel roof even on a mildly warm day. And no guttering to pull all that rainwater away from the site.?

@OldGuyWoodworks 4 жыл бұрын

We haven't experienced it being that hot under the metal. Possibly because it is pretty open underneath. Thanks for watching.

@datdo9574 3 жыл бұрын

How you can plumbing for your outdoor sink

@OldGuyWoodworks 3 жыл бұрын

The plumbing was already there in the slab.

@olioli7652 2 жыл бұрын

How will this hold up to the Arizona sun ?

@OldGuyWoodworks 2 жыл бұрын

Not very well, but it's not in AZ. Wood in AZ needs constant maintenance.

@user-oy5ih6lx6e 4 жыл бұрын

Wow. Nice work!!!👍👍 I’m in Texas and I try hire people to make like that. How much the cost should I expect from contractors?

@OldGuyWoodworks 4 жыл бұрын

In California the cost would vary between $15,000 and $20,000. Thanks for watching.

@savinocueva5207 2 жыл бұрын

How much does this cost to do something like this?

@OldGuyWoodworks 2 жыл бұрын

Our cost (free labor) was between $4000-$5000. If you had someone build this it would be between $15,000 and $20,000. Thanks for watching.

@markingcuevas9729 2 жыл бұрын

What is the thickness of the countertop?

@OldGuyWoodworks 2 жыл бұрын

2 inches.

@paulclohesy1377 2 жыл бұрын

Corrugated ruff?

@OldGuyWoodworks 2 жыл бұрын

Yes.

@Loosehead 4 жыл бұрын

Can I suggest an electric fan in one of the gable ends.

@OldGuyWoodworks 4 жыл бұрын

Always open to suggestions. It doesn't get as hot as you might think, but we appreciate any suggestions and time to make a comment.

@romeliapolly9631 3 жыл бұрын

I made it with Woodglut plans!

@OldGuyWoodworks 3 жыл бұрын

Thanks for watching

@theloniousm4337 3 жыл бұрын

What is a ruf?

@OldGuyWoodworks 3 жыл бұрын

Is that like a "roof"?

@sergioson2001 3 жыл бұрын

How much would you charge to built me one like that one

@OldGuyWoodworks 3 жыл бұрын

I only build for friends and family, but I would suspect the cost would be pretty close to $20,000.

@Fdeubcfhbbjhfd 4 жыл бұрын

Def should have had more cover over the bar area.

@OldGuyWoodworks 4 жыл бұрын

We wanted more, but it made for to low of an overhang. Unless we made the roof pitch less steep, which we didn't want to do. Thanks for the input.

@MrLance81 4 жыл бұрын

Wouldn’t it get super hot under that roof

@OldGuyWoodworks 4 жыл бұрын

It's open enough underneath and hasn't seemed to be a problem. Thanks for watching.

@manuelmercado3780 4 жыл бұрын

Donde se puede contactar con usted.

@OldGuyWoodworks 4 жыл бұрын

para que

@manuelmercado3780 4 жыл бұрын

Old Guy Woodworks quiero hacer terraza vivo en Miami y usted

@OldGuyWoodworks 4 жыл бұрын

@@manuelmercado3780 I'm in Arizona. I only build these for family.

@manuelmercado3780 4 жыл бұрын

Old Guy Woodworks ok gracias

@brian5975 3 жыл бұрын

Damn

@OldGuyWoodworks 3 жыл бұрын

Thanks?

@brian5975 3 жыл бұрын

In a huge way! Absolutely stunning

@jesussantana7498 4 жыл бұрын

Como puedo obtener las herramientas en ecuador no ay esas herramienta y si hay son muy cara

@OldGuyWoodworks 4 жыл бұрын

Gracias por ve. Lamento oir eso No sabria como llevar las herramientas a Ecuador.

@jesussantana7498 4 жыл бұрын

Puede mandarme un catalogo de instrucción a mi correo Calixtosantan43@yahoo.com

@OldGuyWoodworks 4 жыл бұрын

@@jesussantana7498 No hay instucciones, todo esta en mi cabeza

@mariaelenahernandez7510 4 жыл бұрын

Old Guy Woodworks k excelente trabajo quiero algo así vivo en Miami saludos cordiales ustedes es un súper profesional 👏👏

@jaguardrywall7965 4 жыл бұрын

It's called metal stud framing Not sheet metal

@OldGuyWoodworks 4 жыл бұрын

Duly noted. Thanks for watching.

@bradleywolfenstein1043 5 жыл бұрын

It was 84 the whole time

@robertdamian2868 3 жыл бұрын

the new trend u want to miss kzfaq.info/get/bejne/pp6VYKtonLSyn30.html

@Kgio-2112 3 жыл бұрын

So much easier to lay a tile top

@OldGuyWoodworks 3 жыл бұрын

Owner's request. They love the sound of the rain. We did the roof in about 2 hours. Thanks for watching.

@mikefuqua5321 4 жыл бұрын

If you stop it from fast forward 3,567 times could really see something.

@OldGuyWoodworks 4 жыл бұрын

Thanks for the input. I appreciate it.

@420loster 4 жыл бұрын

Don’t use your freestanding grills for outdoor kitchens people. Buy a built in grill design to be built in. I bet that was the customer’s decision. ! Smh! ... Nice job though though. Island looks bitchen!

@OldGuyWoodworks 4 жыл бұрын

Mr. M you are correct. Great observation. Thanks for watching

@kbob8424 4 жыл бұрын

Why? $300 vrs $2000. Seems like a fair decision.

@420loster 4 жыл бұрын

k bob freestanding grills are not standard sizes. So when it takes a shit. The owners will have to modify the island cut-out to fit the new grill. It’s like buying a Ferrari shell and you install a Toyota engine.cost more in the long run.