Always loved the look of raised panels. It reminds me of a castle or the NY public library. So I built one for my office!
Пікірлер: 60
@jenniferaho11692 жыл бұрын
What a labor of love! Beautiful work. Great craftsmanship!
@s4awd2 Жыл бұрын
Awesome! I live in an old tudor home and I decided to extend the existing paneling. It def a labor of love. I had to match the existing quarter sawn wood which was a pain to find but it's all worth it! You should do the whole room and create a nice library!
@davidluffman36803 жыл бұрын
Great job...I have always wanted my living room panelled like that ...with shelves and a fireplace like an English library....beautiful work!!!!
@waynebailey86193 жыл бұрын
AMAZING work, top class, Love it.
@GWL4202 жыл бұрын
As a kid my dad let me destroy walls and it is great fun for kids. Fantastic work on the panels and a great reminder for the scope of a project like this.
@dontfearthereefer56834 ай бұрын
Incredible work
@shakejones2 жыл бұрын
great video and explanation! well done mate! thanks for sharing!🙏🏻
@tomluker17439 ай бұрын
Great job!
@jeffbell93917 ай бұрын
Wow bud you could do this for a living. Do the hole room
@spicynomad2 жыл бұрын
im jealous cause you have all that free labor.
@josephwebber7932 Жыл бұрын
Great video. Exactly what I was looking for to get me started on my next project.
@arthurkukowski Жыл бұрын
That turned out looking really awesome
@cerupsly Жыл бұрын
Thanks ;)
@lizzapaolia959 Жыл бұрын
Fantastic 😊
@brandonfisher53038 ай бұрын
Stunning!
@dunlaoghaire10003 жыл бұрын
Great work! Beautiful. Finish is right on. About blue tape - smart.
@aaronwadzinski57612 жыл бұрын
This gives me some great ideas for my office, thanks for sharing!
@tomasvalentin68964 ай бұрын
Wow, what a great video. Thank you for sharing. Why didn’t you just put the paddle on to the drywall? why did you take the drywall down? I am thinking about doing the same thing in my office,
@Hakaze2 жыл бұрын
Huge improvement. I'd love to have walls like that
@DontTrustTechFirms2 жыл бұрын
Beautiful!
@TheBeautifulTruthh2 жыл бұрын
love what you did! i'd love to see the moulding & trim
@josealonso30552 жыл бұрын
Amazing job
@ATG195348 ай бұрын
Beautiful project. I highly recommend you try dissolving shellac flakes in denatured alcohol yourself. It is so much nicer to use.
@saby87652 жыл бұрын
I musta say that looks good!
@gabet3754 Жыл бұрын
That’s really cool
@DustyKorpse Жыл бұрын
Looks amazing 👍🏻 great effort 🔨🪚
@cerupsly Жыл бұрын
Thanks!!!!
@Omnip073n772 жыл бұрын
Great stuff! Just be careful with the bottom-right method used at 9:20
@elmobolan42742 жыл бұрын
Wow, it's great u have the knowledge to do this kinda wk...this would cost a fortune if u were to hire someone, that's if u can find someone, that will do good wk and won't rip u off...
@aarongrove2688 Жыл бұрын
Wow this is some quality craftsmanship. Could you post an update with the crown molding?
@cerupsly Жыл бұрын
Sadly I moved. 😭
@IvanTheUndertaker Жыл бұрын
When cutting raised panels, do the end grain cuts first, because you're likely to get some tearing of fibres. This will be removed when you subsequently do the cuts along the grain. The same applies when you're machining on a router table or spindle moulder (shaper).
@cerupsly Жыл бұрын
Smart
@ae57883 жыл бұрын
Nice
@ethioUSA2 жыл бұрын
Great job. You mentioned that the project took 9 months at about 15 minutes a day. If you had done the work fulltime and not had to wait for drying hours during finishing, how many work days do you think it would have taken? Also, how much of that time might have been related to the learning processes as a 1st project?
@marianne19593 жыл бұрын
Wow! That is gorgeous!! Not a DIY I will try though...lol
@Momsmusicchannel3 жыл бұрын
I wanted to see how you put the lights in! How big of a whole did you need? How did you cut into the glued seam without breaking the two pieces apart?
@cerupsly3 жыл бұрын
The glue seam is super strong. No risk of breaking it. I cut the hole with a 2inch hole cutter like you would use for installing a doorknob. It just needs to be big enough for the wires to go through ;)
@josealonso30553 жыл бұрын
@@cerupsly looks beautiful I like it 😊😊😊👍👍👍👍👍
@jperry32852 жыл бұрын
Where did you find those lights?
@daghusebye50412 жыл бұрын
🤩👍👍
@nickbailey2022 жыл бұрын
I've tried every keyword search possible and yours is one of only a very few videos on making solid wood wall paneling. Also one of the best! Maybe I missed a detail? Did you rabbet those rails and stiles to receive the panels?
@cerupsly2 жыл бұрын
Yup! The panels are just floating in there.
@nickbailey2022 жыл бұрын
@@cerupsly It really is beautiful. I'm not a big fan of oak because the grain can be very aggressive but your finish really evened it out nicely. The irony is I paneled my office in Walnut and used furniture grade plywood for the insets. The Danish oil made the darker spots darker but only brought attention to the lighter spots. Any chance you have a suggestion to even out the wood tone in Walnut?
@cerupsly2 жыл бұрын
@@nickbailey202 I never really have used Danish oil very much. I tend to prefer finishes that leave a coating on top to finishes that soak in and Harden. I suppose you could try a stain or something to cover up the light spots, but I’ve never had good luck with stain. Do you have a link to some pictures? I’d love to see your work!
@merlinheir2 күн бұрын
Same
@truthserum52024 ай бұрын
You should have installed at least 1/2" plywood on the wall first.
@ericacorwin5669 Жыл бұрын
Why did you remove the sheet rock? Why not just tack up the wood to the sheet rock? If you have original plaster walls - would you have to demo/rip them out to install wood paneling? Thx!
@cerupsly Жыл бұрын
Had to do a lot of wiring in the wall. Thought it would be easier that way
@KnightsTemplarInternational3 жыл бұрын
What was the stain colour you used in the first instance?
@cerupsly3 жыл бұрын
First was aniline dye. First coat was golden shellac. Second was walnut gel stain. Then satin poly
@KnightsTemplarInternational3 жыл бұрын
@@cerupsly Is there a specific shade of aniline dye?
@drachenfeuer50423 жыл бұрын
Lot of work I don’t have time for....I’d need to be doing time in prison woodwork shop to do that detail....good voice though,,,,you ought to think about voice overs, narration like "how it’s made" , announcing or industrial,technical instructional sound tracks..you can wear pajamas to work and shave less frequently.....In a world where panel construction brings men to tears, there "panelnator" coming to theaters this holiday season!!!!!