BULLETPROOFING The Crank Hub In My S55 M3 - You WON’T Believe What We Found!

Рет қаралды 12,187

3 ай бұрын

It was time to bulletproof this S55 so I can enjoy my ownership without any worry of spinning the crank hub. Took my m3 over to Auto Couture Motoring to get the full Gintani crank hub along with some downpipes, 1 step colder plugs, and an oil change. You WON’T believe what we found when the stock crank hub came out. Let’s just say, I am glad we replaced it.
My Store: www.amazon.com/shop/chrisvuono
Instagram: @chrisvuono
Obsessed Garage: bit.ly/2LtofVq
Car Wash Stuff:
Soap: amzn.to/3t9PkXh
Wheel Cleaner: amzn.to/3RfpZDc
Drying Aid: bit.ly/41a3Z12
Tire Dressing: bit.ly/3gynWrk
Tire Dressing Applicator: amzn.to/3v8ZtUU
Rust Inhibitor: amzn.to/3t5Z1pA
Wash Mitt: amzn.to/484npH8
Caliper Brush: amzn.to/3uOj5gO
Wheel Brush: amzn.to/4813c4O
Wheel Mitt: bit.ly/46PofXd
Tire Brush: amzn.to/473cLQ5
Spray Bottles: bit.ly/3riN8Yd
Foam Canon: amzn.to/3Ng8xgG
Buckets: amzn.to/46KbjSh
Grit Guard: amzn.to/47JTIeI
Microfiber Towels: bit.ly/3NiOJtc
Pressure Washer: amzn.to/3uP57eA
Pressure Washer Gun: bit.ly/3RxcRdZ
Stainless Shelf: amzn.to/3GDPXLD
Hose Reel: bit.ly/3NgB3yI
Hose Reel Mount: bit.ly/3uXk6Ty
PW Hose: bit.ly/47GT7KQ
Wall Mount Solution: bit.ly/46MDlN5
Hose Valve: amzn.to/46IP27j
Water Hose: amzn.to/3Gto2hH
What I use to dry the car: amzn.to/47MAc19
STI Stuff:
Bosch icon 26a Wiper: amzn.to/3bGn2pR
Bosch icon 16a Wiper: amzn.to/2OSuuEf
Perrin Reverse Lockout: amzn.to/2wNuqiZ
Perrin Radiator Shroud: amzn.to/2TkLC75
Perrin Boost Control Cover: amzn.to/2T27vcz
Perrin Belt Cover: amzn.to/3adXVsX
Perrin Strut Bar: amzn.to/2Vun5PB
Perrin Battery Tie Down: amzn.to/32ulc7h
Perrin Brake Master Cylinder Reservoir Cover: amzn.to/2I09HLd
Kartboy Short Shifter: amzn.to/3biabPc
Kicker speakers: amzn.to/2ys26UI
Kicker tweeters: amzn.to/2WQ6WEu
Kicker subwoofer: amzn.to/2A2KGOI
Idoing headunit: s.click.aliexpress.com/e/_d7q...
Carlinkit CarPlay (wireless carplay): s.click.aliexpress.com/e/_dY1...
Turbosmart Kompact bpv: ebay.us/13Dys1
F1 Fog Light: amzn.to/3hewSC8
2015-2017 Front lip: ebay.to/2Vk2BYO
2018-2020 Front lip: ebay.to/37mHeeZ
Side Skirts: ebay.to/3qktHwY
Rear Spats: ebay.to/3odfCQh
Carbon creations diffuser: ebay.us/xWXwYS
Carbon spats: ebay.us/VKyo0O
Carbon Fiber Front Lip: ebay.us/Mkbayl
Carbon Fiber Side Skirts: ebay.us/xXp6s2
Uniden R7: amzn.to/325E9yg
Uniden DFR7 Radar: amzn.to/2UDCz3a
Mirror Mount and Mirror Tap: amzn.to/2UFT9iQ
Garage Stuff:
Husky Work Bench: amzn.to/2PwxJSp
Cabinets (black): amzn.to/3cfGfir
What I use to dry my car: amzn.to/2uzSVj0
LED Lighting: amzn.to/2Te9HfK
Pressure Washer: amzn.to/346sdOe
Edifier R1850DB Speakers: amzn.to/3cOD9RI
Polk PSW10 Sub: amzn.to/2XfiXDT
Wera Screwdriver: amzn.to/2YFw5mT
LED Hood Light: amzn.to/3z40afZ
Heater: amzn.to/3C5qhWm
Car Cover: amzn.to/3Rx9xj2
Battery Tender: amzn.to/48Vpdmb
Quick Jack: amzn.to/3RVODcA
Cabinet Lights: amzn.to/48MUYx8
Camera Gear:
Sony ZV1: amzn.to/3Mz2B0w
Deity Mic: amzn.to/3CrT1ri
Cage: amzn.to/35EPSso
Wide Angle Lens: amzn.to/3CtKKn4a

Пікірлер: 73

@leobats14 3 ай бұрын

Very lucky with the broken friction plate. Excellent video.

@Scoobyfreak86 3 ай бұрын

I was shocked! Makes it even more worth it. Thanks for watching!

@abe.hunter 3 ай бұрын

We bought our cars around the same time and that’s when I started watching your channel. Literally was was at Auto Coutoure a couple days before you doing maintenance. Matt is the man!

@Scoobyfreak86 3 ай бұрын

Awesome! Matt is awesome. True car enthusiasts that loves what he does.

@Huester417 3 ай бұрын

Thank the Car God for the Hub. Can't wait for a full video sound clip and drive by.

@davisthuy8586 3 ай бұрын

Thats actually very fair for a reputable shop. If shops around me was similar I might go ahead and do mine lol

@thorgeminden9507 Ай бұрын

Just Bought a 2017 F80 CS in Tanzanite Blue II. I am up saving up for this service! Thank you so much for the transparency in the price! You just earned a subscriber!!

@mizaqenyad4269 3 ай бұрын

Bro thank you so much, I am in central NJ, been wanting to get my f82's crank hub out of the way but have been having a hard time determining where to go for it. I am calling the Auto couture guys monday. Their reputation and price point is perfect. The on other guy i talked to was one of those "I'll do it cheaper" guys and he told me $3200. I'll gladly pay the extra $500 to have it done by the highly experienced professionals with an established good reputation shop. Thank you for this video, have fun with your car👍

@Scoobyfreak86 3 ай бұрын

Awesome! Glad to have helped. They are awesome over there. You’ll be in good hands.

@Island_Aesthetics 3 ай бұрын

car looks amazing 👌🏻

@RicardoDavidson 3 ай бұрын

Appreciate the video and full price breakdown, my M2C will be under going the same process probably at the same shop at some point.

@Scoobyfreak86 3 ай бұрын

Of course! Im glad I could help. You will absolutely be going to the right shop for this. There is an orange m2c there right now getting the ch done 👍🏻

@RicardoDavidson 3 ай бұрын

@@Scoobyfreak86 really appreciate you doing this video man , helped a lot, much respect 🫡

@Scoobyfreak86 3 ай бұрын

Glad to help!

@amanoorjohal8030 3 ай бұрын

If you plan on doing fueling upgrades, the dorch hpfp would be an easy while they’re in there for the crankhub. I’ll be having mine done together.

@koua715 3 ай бұрын

Awesome video, my M4 w/29k miles is currently in the shop for CH, DP, and AA single Midpipe.

@Scoobyfreak86 3 ай бұрын

Thanks! Enjoy your trouble free s55 ownership. It’s a good feeling for sure.

@koua715 3 ай бұрын

@@Scoobyfreak86 definitely, like you said, sleep well at night 😂

@aripapari9226 3 ай бұрын

Agreed ACM is a very reputable shop. I live in NY and only bring my car to ACM to do any work to mine and it’s worth the drive

@Scoobyfreak86 3 ай бұрын

Speaking facts! They truly know their stuff. Truly don’t think there is any better.

@RAElias 3 ай бұрын

Funny enough, I was just watching Alex’s episodes on the evolution of Gintani. One thing he emphasized is that it’s pronounced with a hard G. (Just FYI).

@Scoobyfreak86 3 ай бұрын

Good to know! Appreciate the heads up.

@itzjere 3 ай бұрын

Wow! The cracked friction plate is crazy. Very lucky indeed. Along with the parts you had swapped, I also had my valve cover swapped. No labor charge of course. Any reason you didn't do that preventative maintenance? Pretty easy DIY for later, but since they already had mine out, I figure why not.

@Scoobyfreak86 3 ай бұрын

Mine was inspected and was not needed at this time.

@jaimehurtado356 3 ай бұрын

I just replaced my tie rod, the top end actually popped out from the ball joint and completely disconnected from the sway bar lol thought my strut was blow from all the clanking

@Scoobyfreak86 3 ай бұрын

Crazy! Glad you got it replaced. Mines no where near that and function properly. Just seized and not able to adjust to toe. Will be fixed shortly!

@jasonmjonesuk 3 ай бұрын

Given your plans for tuning, I’d say that was a very sensible move! If not tuning *and* you’ve got BMW warranty, I’d say it’s probably not needed

@Scoobyfreak86 3 ай бұрын

I’ll be going over to things in more detail on the full crank hub video, but I think the condition of my crank hub is a good sign to do it either way.

@jasonmjonesuk 3 ай бұрын

@@Scoobyfreak86 Perhaps, but if it’s not tuned it would totally be covered by warranty and hence it’s BMW’s money and not your own (and quite a decent sum to avoid)

@Scoobyfreak86 3 ай бұрын

If under warranty, then I would get one’s reasoning. However, most of these cars are out of warranty at this point unless they extended it or have a third party.

@5speedracer 3 ай бұрын

Hey Chris, where did you get the black license plate for NJ?

@Scoobyfreak86 3 ай бұрын

Custom made

@5speedracer 3 ай бұрын

@@Scoobyfreak86 Thanks

@ladin425 3 ай бұрын

That's a really nice engine compartment except I have say BMW failed with that radiator support. It looks like engineering out of chevy lumina

@Scoobyfreak86 3 ай бұрын

Upgrading soon 👌🏻

@kidstarr100 3 ай бұрын

What would you recommend as a good BMW to get as a first time BMW owner whose coming from a 2020 Si coupe. I’ve never owned a RWD car. The bmw would have to be manual cause I swear I can never go back to auto lol

@Scoobyfreak86 3 ай бұрын

Unfortunately, the only manual BMW’s are older ones or m cars. But if you want something rwd and manual, I’d recommend an f87 m2 manual. A blast of a car to drive.

@kidstarr100 3 ай бұрын

@@Scoobyfreak86 yeah I’ve been looking at those or E92 335i’s but a ton of those have been poorly cared for lol

@Mike604 3 ай бұрын

@@kidstarr100manual 340i if you look hard enough

@ThePatrickBateman69 3 ай бұрын

Only 2k miles in 8-9 months? clean ride tho regardless great vids

@Scoobyfreak86 3 ай бұрын

Yep. It’s not my daily so it only sees the warmer dry days. Been trying to drive it more now that the warmer months are coming back around.

@ileonardR35mk5Supra 3 ай бұрын

shesh for a 21k miles,that's crazy, what year is your m3? planning getting a 2018 m3,with 80k miles, do you think bmw fix that issues on that year?

@Scoobyfreak86 3 ай бұрын

Mines a 2018. BMW did not address this so it doesn’t matter what year you get. It’s present throughout all years of the f series s55.

@stephendavis3710 3 ай бұрын

Would you ever sell the f80 any time soon?

@Scoobyfreak86 3 ай бұрын

Hard for me to say yes or no at this point since I’m thoroughly enjoying it currently. But at the end of the day, anything and everything is for sale at the right price.

@heslerleonbejarano9046 3 ай бұрын

I paid 2250 for my 4 pin crankhub at SSR performance

@F80_comp 3 ай бұрын

is that 3750 with ch or is that without ch

@Scoobyfreak86 3 ай бұрын

With. Total cost parts and labor.

@goransimic8650 3 ай бұрын

Price for work and part?

@Scoobyfreak86 3 ай бұрын

It’s all broken down in the video

@UrW0rstNighmare 3 ай бұрын

What sunglasses do you have?

@Scoobyfreak86 3 ай бұрын

amzn.to/3VBmiLR

@StockDC2 3 ай бұрын

I'm always curious how much people that can do this maintenance make. It'd be a roughly tough pill for me to swallow if I needed to do ~$5k worth of work.

@Scoobyfreak86 3 ай бұрын

Think of it this way, would you rather spend the few thousand to do the crank hub or spend 15-20k+ on a new motor? May not make sense to some, but to me, it sounds like a pretty good deal for peace of mind.

@StockDC2 3 ай бұрын

@@Scoobyfreak86 Oh, I 100% agree with you. I was just wondering how much money one should have to afford a car like this and be able to do the required maintenance on it. You had the nicest STI I've ever seen and I always had the same question when I watched those videos as well.

@gokuvegeta179 3 ай бұрын

I thought Kies motorsport were the best in NJ :P

@Scoobyfreak86 3 ай бұрын

Great company and owner, but they do not do customer installs.

@gokuvegeta179 3 ай бұрын

@@Scoobyfreak86 someday, my F80 built will catch up like yours....keep it up!

@Scoobyfreak86 3 ай бұрын

@gokuvegeta179 enjoy the journey! No rush.

@EliTheOne26 3 ай бұрын

It’s very hard to trust anyone up here in North Jersey, a lot of shady mechanics.

@Scoobyfreak86 3 ай бұрын

It’s all over. Not just Nj. Thankfully, ACM is one of those shops you can trust and put confidence in that they will do the job properly and exceed your expectations.

@RAElias 3 ай бұрын

We’re actually quite blessed with multiple reputable shops in NJ. Bimmerhub in Westfield is really making a name for themselves and owned by a former BMW master tech. Jkingsauto is another very reputable shop in North NJ. Believe it or not, Detailers Domain also does at least suspension related installs. Of course, the Stance Shop in Queens. That’s all just North NJ (and Queens), and we haven’t not even gotten to South NJ (and some central).

@user-zt4kz8rx8k 3 ай бұрын

Please hide that G80

@DJ-ir2qy 3 ай бұрын

There’s a difference between over paying and paying for quality work. You overpaid. With the right tools this can be easily done in your garage. I would also argue that most experienced shops charge less!

@Scoobyfreak86 3 ай бұрын

Price isn’t the main focus here. 99% of owners would not be comfortable handling this job on their own. Myself included. Going to a competent shop with credibility and the proper experience that I felt could handle the job was my own choice. I expressed several times in this video that it’s not a job I felt comfortable doing on my own and even said it can be absolutely be done for less. But that is up to your own discretion of what you’d like to do. So no, I do not think that I over paid for the quality of work done and peace of mind. This is just the route I decided to take with my own car.

@BarbWaltersMusic 3 ай бұрын

@@Scoobyfreak86 yeah this is not your normal DIY home project

@bartbersselaar3968 3 ай бұрын

I did suspension brakes turbos coolers etc to my s55 and b58 myself at home. Had the crank hub done at a shop, job is just next level and imo to involved for the home mechanic. Btw i paid €1300 for the part including installation.

@chrisbradley3224 3 ай бұрын

This is a very reasonable price for this service which requires drilling the crank by someone who’s preferably done it many times before. The Gintani part is expensive as well.

@immytweed4607 Ай бұрын

@@bartbersselaar3968was that in uk if yes were did you get it done and what crank did you go with.

@18zips80 3 ай бұрын

Would love to see a mod list video on a g80 even if you have no plans for one. I take delivery of mine in a few weeks and would love to hear what you’d do