Bunk Board Guide-on Installation

Bunk Board Guide-on Installation - Boat Trailer Rails

Рет қаралды 61,332

4 жыл бұрын

Smith Bunk Board Guide-ons: www.amazon.com/dp/B000KK90P6/...
This video shows how to install the 'Smith' Bunkboard Guide-on" / AKA Bunk Board Rails / AKA Bunk Board Guides. I'm always fighting current when trying to load my boat from the river. These guides have been one of the best purchases I've made. Now it is super easy to load the boat on straight. All you need are some wrenches and a screwdriver, and you are set for this install. This is super easy to install once you know the basic set-up. Thanks for watching, commenting, and subscribing!
#philcrockett

Пікірлер: 40

@davidhogue4402 Ай бұрын

Thank you ! Just finished my installation. Used your video every step of the way.. very very well spoken. God bless you!

@PhilCrockett 22 күн бұрын

Glad it helped

@MARKB671 Жыл бұрын

Glad , I came across your video. Extremely helpful. Very clear instructions. This is the exact same install ( exact same parts )for Cabela's Bass Pro bunks in 2023 . Many thanks !

@PhilCrockett 9 ай бұрын

Yeah, this bunk board has been serving me well! I totally recommend it!

@rodjohnson7101 3 жыл бұрын

These video is great ! Its vocally great to easy to understand . Instructions are clear and great up close clear video !! Exactly the information I was looking for ! Thankyou !!👍👍👍😊

@PhilCrockett 3 жыл бұрын

Glad it was helpful!

@h0ckeypuck 3 жыл бұрын

Just what I was looking for. Very well done and helpful!

@PhilCrockett 3 жыл бұрын

Great to hear!

@jeremy9474 Жыл бұрын

I purchased this because of your video after weighing all options of guides. This will help significantly. I have a 14’ v-hull with a tiller motor and the stern drifts away on me as soon as I hook up the front. The trailer has a crossbar up towards the front which prevents me from having the bunks too far out of the water; otherwise I’d have the trailer further out of the water to prevent that problem

@michaeldavis4793 3 жыл бұрын

MAN! I’m glad I went to KZfaq and watched your video. I was going to Weld my brackets to the trailer. I found some of that same square tubing you have and made the Uprights with it. Thanks For This Great Video!

@PhilCrockett 3 жыл бұрын

Glad I could help

@CHUNKYCATSFISHING 3 жыл бұрын

Absolutely fantastic video thank you for sharing my friend

@PhilCrockett 3 жыл бұрын

glad u like it! hope you like my other vids too

@hikerccter9036 4 жыл бұрын

I wasn't sure I should order these or not. After your video I' am sold! Thanks.

@PhilCrockett 4 жыл бұрын

here ya go: www.amazon.com/dp/B000KK90P6/?tag=aiponsite-20&linkCode=ic5&ascsubtag=amzn1.infl.us.product&creativeASIN=B000KK90P6&ref=exp_philcrockett_dp_vv_d

@hikerccter9036 4 жыл бұрын

Phil Crockett thanks, I ordered them right after your video.

@donnysipei 2 жыл бұрын

thanks a lot for the sharing

@PhilCrockett 2 жыл бұрын

My pleasure!

@durangodave 2 жыл бұрын

My boat sits rather low in the trailer its a V hull. So i guess to protect the boat one could cut off the extended (unused ) portion of the large board braces that extend under the boat. But even with a flat bottom i think it might be possible to damage the hull if the boat came in contact with the end of those braces. So i would still trim them off if you are going to use that trailer for that same boat forever. Thanks for the video

@PhilCrockett 2 жыл бұрын

Yes, every once in a while a fella has to customize things to fit their toys. Thanks for watching and taking the time to comment, Dave!

@Johndoe21256 7 ай бұрын

What about your bottom running boards?

@bigglyguy8429 2 жыл бұрын

My boat is fatter in the middle than at the stern, so I went for the same thing but single and much shorter. But I'm wondering if I'll need another pair further up, near the fat middle..?

@PhilCrockett 2 жыл бұрын

dry fit everything to see how it looks before drilling. There's no rules on where to put it. Just do what works for your needs

@GmanfromTexas Жыл бұрын

Very nice mod. I wonder if it would work on my tracker 170. I’m looking for a mod that would drive the boat strait to the winch.

@PhilCrockett Жыл бұрын

I don't know if this would work, but I imagine it would. I doubt it has anything to do with the size of the boat. It probably has more to do with the placement on the trailer

@alexmouzas 2 жыл бұрын

I noticed you also had previously mounted roller guides on the trailer. I just bought a boat and trailer with none of these and trying to decide which ones to get. I only want one set. Which do you like or recommend as better? I have a 13' whaler. Thanks.

@PhilCrockett 2 жыл бұрын

Those actually came on the trailer when I bought it. Best thing to do, is to go to a dealer and ask them. OR...... just go to a boat lot and look at what is on the new trailers that compare with yours. Hope this helps.

@rogermuir5609 3 жыл бұрын

How far away should bunk boards be from a fiberglass boat?

@PhilCrockett 3 жыл бұрын

A couple inches at max

@rogermuir5609 3 жыл бұрын

Thank you!!

@PhilCrockett 3 жыл бұрын

no prob, Roger!

@nathanehlers2114 3 жыл бұрын

Where do I find this kit and how much is it ?

@PhilCrockett 3 жыл бұрын

I dropped a link in this video description. Hopefully that will help.

@Dirk-gg1nv Ай бұрын

This unit sucks. The brackets bend very easily when your boat rubs against them.

@PhilCrockett 22 күн бұрын

interesting.... mine is still going strong and I use it a lot. I wonder if you got a lemon.

@Dirk-gg1nv 22 күн бұрын

@@PhilCrockett they scratched the shit out of my boat. Damaged gelcoat. Im taking them off . I have an M hull. Maybe thats why. It’s not a lemon. I got spare parts from E trailer and the same shit happened.

@PhilCrockett 22 күн бұрын

wow! that does suck! I don't blame ya for ditching them. I love mine, but as you can see, my boat is a floating pie tin. It's all scratched up from years on the Missouri River. It's a brutal river!