Busted John Deere Riding Mower Deck - Is It Worth Fixing?

  Рет қаралды 28,195

donyboy73

donyboy73

Жыл бұрын

Busted John Deere Riding Mower Deck - Is It Worth Fixing?
Don’t forget to click the 🔔 to turn on Video Notifications for more money saving videos and tips, featuring all the brands like Stihl, Husky, Husqvarna, Honda, Echo, Kohler, Tecumseh, Dolmar, Makita, Poulan, Ariens, Powermore, Briggs and Stratton, Champion, Murray, John Deere, Craftsman, MTD, AYP, etc.
Watch how to remove stubborn wheel dust caps here;
• Lawn Tractor Wheel Dus...
Deck belt used in video is part number GX20072 from John Deere
Large deck idler pulley is part number AUC17621
Smaller deck idler pulley is part number GY22172
If you'd like to become a patron to help this channel grow and get involved with future video ideas, here is the link:
/ donyboy73
Connect with me on these social media spaces (plus that's where I announce contest winners)
Facebook: / donyboy73-the-small-en...
Twitter: / donyboy73
Instagram: / donyboy73
I have easy to follow and thorough step by step tutorials "do it yourself" (DIY) videos to help you with your broken lawn and garden equipment including snowblowers and zero turn mowers.
I do my best to teach you how to easily diagnose problems the fastest, quickest and most efficient way with real repairs beyond just replacing a spark plug. These tips are for both the homeowner and shop owner.
Whether it be a handheld, two stroke, two cycle engine like a chainsaw, weed eater, weed whacker, string trimmer, grass trimmer, line trimmer, hedge trimmer, strimmer, brush cutter, leaf blower, or four stroke, four cycle units like a lawnmower, wood splitter, lawn tractor, zero turn mower, snowblower, pressure washer, generator or a ride on mower that needs parts installed or replaced, I’m your go-to guy.
My favorite brands of spark plugs are NGK and Champion and are the ones I recommend.
I’ve been a small engine mechanic for many decades and also run my own repair shop so my videos are loaded with tips and tricks that I have learned and want to share with you. You will also find many tool and product reviews from top brands on my channel as well.
I have the largest Small Engine Repair Video Library on KZfaq and the entire internet with over 1200 videos, just GOOGLE "DONYBOY73"!
I want "DON THE SMALL ENGINE DOCTOR" on KZfaq to save you time, frustration and most importantly, MONEY with my HOW-TO videos!
Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. DONYBOY73 “The Small Engine Doctor” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. DONYBOY73 “The Small Engine Doctor” recommends safe practices when working with power tools, hand tools, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of DONYBOY73 “The Small Engine Doctor”, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not DONYBOY73 “The Small Engine Doctor".
Tengo tutoriales paso a paso fáciles de seguir y completos, videos de "hágalo usted mismo" (DIY) para ayudarlo con su equipo de jardín y césped roto, incluidos quitanieves y cortadoras de giro cero.
Hago todo lo posible para enseñarle cómo diagnosticar fácilmente problemas de la manera más rápida, rápida y eficiente con reparaciones reales más allá de simplemente reemplazar una bujía. Estos consejos son tanto para el dueño de la casa como para el dueño de la tienda.
Ya sea un motor manual de dos tiempos y dos ciclos como una motosierra, un desmalezador, un desmalezador, una cortadora de hilo, una cortadora de césped, una cortadora de hilo, una cortadora de setos, una podadora, una desbrozadora, un soplador de hojas o unidades de cuatro tiempos y cuatro ciclos como una cortadora de césped, una cortadora de leña, un tractor cortacésped, una cortadora de césped de giro cero, una sopladora de nieve, una lavadora a presión, un generador o una cortadora de césped que necesita que se instalen o reemplacen piezas, soy su persona indicada.
He sido mecánico de motores pequeños durante muchas décadas y también dirijo mi propio taller de reparación, por lo que mis videos están repletos de consejos y trucos que he aprendido y quiero compartir con ustedes. También encontrará muchas revisiones de herramientas y productos de las mejores marcas en mi canal.
#donyboy73 #howto #ridingmower

Пікірлер: 153
@donyboy73
@donyboy73 Жыл бұрын
Watch next ➡Lawn Tractor Won't Start? Try This Easy Free Fix! kzfaq.info/get/bejne/aayhq6141sXWgWg.html
@powrguy1696
@powrguy1696 Жыл бұрын
I've seen a lot worse decks, with paper-thin rusty metal. I've done the same patching you mentioned, where porous or weak/worn areas have to be rebuilt, to keep the deck usable. I love your videos that are real-world, with the burn-throughs, and fewer out-takes, compared to others. That's the way it is when repairs are made, and you work around the hassles and finish the job properly. Well done.
@fredscheerle7592
@fredscheerle7592 Жыл бұрын
@@boots7859 That's just how it is Now, through away society, no one does maintenance any more! I still change Oil On all My 4 Stroke Motors Every November Like clock work, I Don't Pressure Wash Any, Play's havoc with seals and Electrics.
@RonDogInTheHouse
@RonDogInTheHouse Жыл бұрын
@@boots7859 How did society get to this point? Now manufactures design stuff for this very customer mindset.
@mattb9664
@mattb9664 Жыл бұрын
I have the same model- it's a pretty solid machine except for the finish, which was flaking off before any of the surface rust started. It was pretty obvious that the surface of the deck wasn't prepared properly to receive paint, and it had zero primer. It's not only the owners fault that the paint flakes off.
@100vg
@100vg Жыл бұрын
Those welds aren't going anywhere soon. Serious job there, Don! Great work!
@tonym6920
@tonym6920 Жыл бұрын
All due to lack of preventive maintenance. My deck is 16 years old and 100% rust free. My JD is model 135.
@lilo2469
@lilo2469 Жыл бұрын
U Da Man Tony
@JHruby
@JHruby Жыл бұрын
Your model was built before the infamous series of John Deere's with quickly rusting decks due to poor paint and prep quality.
@54cal54
@54cal54 11 ай бұрын
These decks are cheaply made, I swear they're from China like the pulleys on them. The metal is so thin it develops stress cracks. My cheap 85 Murray never did that.
@barrypettit3668
@barrypettit3668 Жыл бұрын
Excellent video Don. I wonder why people don't keep their machines cleaner, at least blow it off before they take it in for service. Keep the videos coming.
@Vultain
@Vultain 10 ай бұрын
They don’t own the tools most of the time. Nor have the inclination nor knowledge to use them. Not even a power blower, scraper, etc.
@patthesoundguy
@patthesoundguy Жыл бұрын
With how the prices of those machines are rising, this kind of repair is going to be more and more common because people won't toss the machine because a new one is $3k now where not all at that long ago they were $1.5k. I love repairing decks like that, I find it very satisfying to put something back in service. I love how you added the extra welds 👍 Gotta love Stens, they are always adding new parts to their catalog, saves a lot of money not having to buy the OEM. I order quite a bit from Stens.
@ackack1
@ackack1 Жыл бұрын
Nice rescue. Consider using Rustoleum Rust Reformer either as a base coat ... or as the only coat if black is desired. You only have to lightly remove loose surface rust before applying directly to the rust itself. From the product page: "bonds with rusty metal and instantly transforms it into a non-rusting surface." I've used it with good results.
@rf005
@rf005 Жыл бұрын
Another Quality Job by Super Don.
@geraldalfano5581
@geraldalfano5581 Жыл бұрын
You are a very skilled welder as well as being a crack small engine and power equipment expert. Your videos are well done and detailed with excellent tips and advice.
@gordbaker896
@gordbaker896 Жыл бұрын
That Powder Coating on Mower decks (and many Other applications) should be Banned by the industry. I would be ashamed to bring such a filthy machine to a shop. Thanks for not having 'music'. Never needed. Great Fix. The price of the reduced size 'rattle cans' is ridiculous. 42" with 2 blades is great. That Series has always been good to me. Hopefully your Customer appreciates the extra effort.
@trumpzilla4193
@trumpzilla4193 Жыл бұрын
I do not even have a riding mower (yet) but I enjoy and learn much from your gentle and clear videos!
@gjensen500
@gjensen500 8 ай бұрын
Donny, I wish your repair shop was in my town. All we have are grumpy old men that change parts only. Great Job Donny. Throughly enjoy watching you repair stuff. I always learn so much from you.
@swingbelly
@swingbelly Жыл бұрын
Another excellent video, Dony. You are truly a master of your trade. You make repairs look so easy and straight forward. Thanks. Time to check out my machine for potential problems.
@philliphall5198
@philliphall5198 Жыл бұрын
There decks are very thin material and best to keep them clean top and bottom after every use 😊
@Drottninggatan2017
@Drottninggatan2017 Жыл бұрын
How do you keep them clean at the bottom? You can't lay the machine on the side, can you?
@philshock3805
@philshock3805 Жыл бұрын
@@Drottninggatan2017 Lawn mower jack. The only problem is after I mow, edge, weed-eat and blow off the sidewalks and driveway, the last thing I feel like doing is dragging out the jack, lifting the mower and scrape clippings off the bottom. lol I do blow clippings off the top of the deck though so there's that at least. This guy's mower was totally neglected.
@davidquinn6161
@davidquinn6161 Жыл бұрын
You can buy and install an adapter that allows you hook up your garden hose to the top of the deck with a hole that goes thru to the underside. You turn on the hose and run the blades at full speed for about 5 minutes. Turn off the hose and run another 5 minutes to dry the underside. Works very well at keeping the underside clean.
@tadeuszmichaelwlodarczyk3120
@tadeuszmichaelwlodarczyk3120 Жыл бұрын
@@Drottninggatan2017 what you do is buy 2male hose fittings with nuts. Then drill 2 holes either side of the deck. Make up 2connecting hoses into 1 And connect to water 💦 tap switch on and start your ride on and blade's going. That's how l clean the underneath of my mowers. I'm from Melbourne AUSTRALIA 👍🤠
@tadeuszmichaelwlodarczyk3120
@tadeuszmichaelwlodarczyk3120 Жыл бұрын
@@Drottninggatan2017 nearly forgot make sure the nuts are nowhere near the Blade's 😁 good mowing 👍
@dragon81heart
@dragon81heart Жыл бұрын
Haven’t had the brackets break off but had all the other deck rust issues. (2006 JD 102 with the same 42” deck) Was able to keep it going for quite a few years, but it eventually became too rusted to even weld properly. I cut a lot of wet grass unfortunately, and not having an inside place to store the tractor didn’t help. Definitely got my money’s worth out of it, but finally had to get something new to replace it. Tractor is still good, so still wanting to find a decent deck to keep it as a backup But the JD Z320R that I got as a replacement is phenomenal! The difference in the 42” Edge deck on the tractor and the 42” Accel Deep deck is amazing in the thick wet stuff lol No clumps, none at all.
@liljoeii6091
@liljoeii6091 Жыл бұрын
Nice Fix look brand new. Thank you for the video
@raymondsadowski6080
@raymondsadowski6080 Жыл бұрын
Nice welding job! I learned a few tricks filling blow holes!! Thanks
@johnclarke6647
@johnclarke6647 Жыл бұрын
It is hell to weld rusted metal and have to fill in burn through,is it it? I do it the same way you do - use a welding rod to help fill in the burn through. I would have welded it DC+ at about 85A with a 5/32 6013 rod. Then, knock the slag off and hit it with a 7014 rod where I could. I love 7014 rods - make beautiful down hand welds.
@WJCTechyman
@WJCTechyman Жыл бұрын
Informative and tastefully concise as always, Don. I have a deck in much worse repair as it has holes and weak metal all over the place. Yes, I could buy a new one but they start at over $1000 Canadian and the machine is more than 20 years old. It's for an older Cub Cadet Series 2000 tractor and I really like the cut quality of it overall as well as the fact that the transmissions in both of my machines are shaft drive from a horizontal shaft engine.
@Southernshaker
@Southernshaker Жыл бұрын
Dang! You're a very good welder. Who knew.
@74stevedc
@74stevedc Жыл бұрын
Well done repair. Definitely my favorite get to the point small engine repair channel. Most of the time I look for shortest video of a repair. Been a sub for a very long time⌛️ .
@adnacraigo6590
@adnacraigo6590 Жыл бұрын
You have a way of making it all look easy.
@deancarder5829
@deancarder5829 Жыл бұрын
Excellent repair and video!
@Perly53
@Perly53 7 ай бұрын
Wow. Thanks so much for the detailed video. I do have rusted areas on the LT150 I just purchased used. I don't know how to weld so perhaps I'll be able to find a welding shop that I can bring to here in Central Eastern Florida as needed.
@danobrien5070
@danobrien5070 Жыл бұрын
Awesome work db73 keep it up 👍
@rickthelian2215
@rickthelian2215 Жыл бұрын
Great job wielding once again😊
@tadeuszmichaelwlodarczyk3120
@tadeuszmichaelwlodarczyk3120 Жыл бұрын
Great job 👍 donny " but" l would have put som welding underneath Also. Love your show. From Melbourne AUSTRALIA 👍🤠
@johnmckee7937
@johnmckee7937 Жыл бұрын
My JD is a barn find over 30 Years old, yet the paint is still on deck! Funny how they used to be able to paint decks. Good work on repair!
@gordbaker896
@gordbaker896 Жыл бұрын
Likely was not Powder Coated/baked.
@donyboy73
@donyboy73 Жыл бұрын
They were well made made back then!
@Colt3854
@Colt3854 2 ай бұрын
Most likely the old ones had been primed before the top coat. Now?
@denniss2847
@denniss2847 Жыл бұрын
Pro at work..good job
@KensSmallEngineRepair
@KensSmallEngineRepair Жыл бұрын
Watching you weld, I don't feel so bad about watching myself! Thanks Don!
@jimbarchuk
@jimbarchuk Жыл бұрын
Master class bodge.
@metheewatchakittikorn4796
@metheewatchakittikorn4796 Жыл бұрын
Thank you Donny. You could fix about anything.
@billsmith1770
@billsmith1770 Жыл бұрын
good as new . great job .
@donfoley5780
@donfoley5780 Жыл бұрын
Great job Dony, wish you would give us a low down on what to do when pressure washing the engine and all. Would love to see or hear what to be careful with when using the pressure washer.. Thanks again for your great channel. 🤠👍🇺🇲
@donyboy73
@donyboy73 Жыл бұрын
I show in this video; kzfaq.info/get/bejne/gJx4Z6WU3dbPn2g.html
@upsidedowndog1256
@upsidedowndog1256 Жыл бұрын
Lots of neglect to that mower. JD's are expensive. Glad you had something to work with.
@shanhannum9999
@shanhannum9999 Жыл бұрын
i like using a needle descaller for cleaning under decks
@canoetipper019
@canoetipper019 Жыл бұрын
I had to replace the spindles and pulleys on my Craftsman YS4500 mower deck this Spring...I figured that wasn't so bad considering I got it in 2007. I even put a new belt on for good measure...lol. I haven't seen any issues with the brackets...so far...but it's good to know to look for cracks or signs of fatigue around them...maybe catch it before they break off. Thanks for another great video donyboy. I'm thinking that if I were doing that repair to my own deck I would strip it down and get it sand blasted and completely painted...due to the peeling paint. But it wouldn't be cost effective to pay someone (like you) to do that probably. Cheers from NB
@donyboy73
@donyboy73 Жыл бұрын
It wouldn't be cost effective at the dealer but my prices are more than reasonable!
@Patrick4959
@Patrick4959 Жыл бұрын
grouse work Donny mate and that welding repair job payed for itself i reckon the repair spot for sure and i know the customer is gonna be very happy for sure and cheers from Australia 🐨🐑🦘🌴🌏🇦🇺 or the land down under to your area in Canada. 🇨🇦🍁
@johnc7512
@johnc7512 Жыл бұрын
Nice job!
@mikespain8655
@mikespain8655 Жыл бұрын
I weld decks when brackets break. I usually weld top and under the deck, and also weld the other bracket better. They use minimal amount on welding at the factory it seems. Then hit it with some primer and match the paint if possible. Good job.
@stoolie10
@stoolie10 Жыл бұрын
Looks better than new 😊. I scrapped a mower recently and the blade was on upside down, funny how the blade shows no wear 😂.
@josephrich6014
@josephrich6014 Жыл бұрын
Nice job Don.
@carmenlamanna5391
@carmenlamanna5391 Жыл бұрын
Great video as always DB73. Man, how does a guy let a deck get that bad. I would have at least cleaned it before I brought to you.
@donyboy73
@donyboy73 Жыл бұрын
Exactly!
@RonDogInTheHouse
@RonDogInTheHouse Жыл бұрын
I would have been embarrassed to take it in looking like that. Guess some just don't know anything about basic maintenance.
@harrygrimley4352
@harrygrimley4352 Жыл бұрын
Great job don. Your attention to detail is commendable. Yiu should think about opening a repair shop or something. 😅. Thank you for sharing this with us
@donyboy73
@donyboy73 Жыл бұрын
yes😂
@philliphall5198
@philliphall5198 11 ай бұрын
It’s a heck of a lot of trouble to put a bigger plate over it and heat and bend down in place, but it will stay put, also weld inside also if it’s not too thin
@stephenzies8867
@stephenzies8867 Жыл бұрын
Awesome Job Don. 👍
@donyboy73
@donyboy73 Жыл бұрын
Thanks 👍
@pollywollydo
@pollywollydo Жыл бұрын
This lad could weld ice cream to concrete 🙂🏴󠁧󠁢󠁥󠁮󠁧󠁿🇨🇦🏴󠁧󠁢󠁥󠁮󠁧󠁿
@electroddxful
@electroddxful Жыл бұрын
Great job👍🙏👍🙏
@stanzo1
@stanzo1 28 күн бұрын
Thank you for the very informative video. After reinstalling the deck everything worked fine except that I lost both of the rear hanger rods during the first mow. I left the washers off since I had trouble installing them with the locking pin. Obviously, a mistake. Do you have any hints or suggestions for me? By the way my right bracket is rusted through, the left is fine. Just as you mentioned.
@deanmoore420
@deanmoore420 Жыл бұрын
Great job welding the mower deck. I’ve done a lot of them that’s for sure. Great video.👍
@Jerkwad152
@Jerkwad152 Жыл бұрын
Texas TIG technique, approved 👌
@kenk3102
@kenk3102 Жыл бұрын
...good job Don....enjoyed watching you weld....as the DIY guy that I am, would just replacing the bearings in the pulleys be an option?...or not worth the effort?... 🙂
@donyboy73
@donyboy73 Жыл бұрын
bearings are built in
@gadasavideos8564
@gadasavideos8564 Жыл бұрын
Since I'm not a great welder I would try to bolt an angle bracket to the hanger and the adjacent deck for extra support.
@donyboy73
@donyboy73 Жыл бұрын
That would work too
@ridinrancher9443
@ridinrancher9443 3 ай бұрын
Would you do the same in the grass shoot area. Mine rusted out there and that side of the deck hits the blades on hills.? Thanks.
@tomg721
@tomg721 Жыл бұрын
Nice repair Donny. Keeping another one from going to the scrap pile.
@danielpadgett2831
@danielpadgett2831 Жыл бұрын
Some people just don't think about cleaning the deck off. My lawn mower is 8yrs. Old rust free and I blower the entire mower off after every use. I bet that repair out lasts the rest of the deck
@marklubecke4854
@marklubecke4854 Жыл бұрын
Nice save Don, that deck looked like it was on its last leg. Maybe wasn't the best equipment JD has put on market.
@georgebenevides
@georgebenevides Жыл бұрын
Good job Don. You brought a tractor that looked old and not well cared for to looking brand new.
@JohnDoe-fp8mn
@JohnDoe-fp8mn 11 ай бұрын
Awesome
@baggins1
@baggins1 Жыл бұрын
I'm still a hack welder but I get it done
@andrewsteele7663
@andrewsteele7663 Жыл бұрын
Thanks Don excellent tutorial. I would like to point out that you would never make a living spray painting, and neither would I, Cheers
@donyboy73
@donyboy73 Жыл бұрын
I do spray painting decks lol!
@oldjarhead1125
@oldjarhead1125 Жыл бұрын
Nice.......
@johnw1178
@johnw1178 Жыл бұрын
Don, as always nice job. I think the welds will outlast the rest of the machine 😉. After seeing the before I can say I have seen dirtier machines. It amazes me that people don’t use a blower to clear out the deck after each use. It’s bad enough when the grass sticks to the underside but there are no excuses for not cleaning the top side. Even it the owner doesn’t have a pressure washer a periodic hose down under the hood with a hose will go a long way. With the new pulley’s, belt and blades he should be good for another 10 years 🤪
@RonDogInTheHouse
@RonDogInTheHouse Жыл бұрын
Is it a bad design, or owners who never clean their equipment? I just can't get my head around the mindset of "I'm not going to do basic maintenance, when it breaks I'll spend hundreds to pay someone to do it for me". Maybe it belongs to an elderly person who can't. Looks to me like a little cleaning, touch up the rust before it gets to bad, may have gone a long way. But hey, it keeps you in business. Thanks for the video. Just subscribed.
@donyboy73
@donyboy73 Жыл бұрын
The design needs to be re-inforced
@jameshedrick605
@jameshedrick605 Жыл бұрын
Nice looking welds. I like to keep mine clean and take a wire brush on my angle grinder to it every now and then. Other than the deck it looks like a new mower
@whatsyourmax223
@whatsyourmax223 Жыл бұрын
Hit that like button 💯👍💯
@gadasavideos8564
@gadasavideos8564 Жыл бұрын
Changing the head gasket or camshaft while you have that briggs single in the shop?
@rjb6327
@rjb6327 7 ай бұрын
I know very little about welding. Was that a brass rod you used to fill the holes?
@mountgambier8142
@mountgambier8142 Жыл бұрын
Good job Dony. What was the rod you used along with mig (6:51 in this video)? Was it copper or bronze? Watching your videos here from Australia.
@aaube2659
@aaube2659 Жыл бұрын
Got to love how customers have no regard for the mechanic and leave their equipment an utter mess. No excuse as they probably own a leaf blower.
@sparky1044
@sparky1044 Жыл бұрын
I was going to commend you for just painting the repair, but then my ocd hit you and you repainted all the rusty spots. 😂 I'm curious, do you use a special lens to film welding? Out of reflex,I expect to get flashes while watching.
@thomasroche164
@thomasroche164 10 ай бұрын
Can I ask what kind of rod you used with your Tig welder?
@bikerdad63
@bikerdad63 Жыл бұрын
It always amazes me how little people take care of their equipment. You would never see my deck with any debris on it especially that much.
@pnz4aufsh
@pnz4aufsh Жыл бұрын
3 passes isn't too overkill. I never finished my certification coarse but wanted to learn welding so I can fix my own stuff. Had a very wise instructor and 3 passes not to overkill. My instructor and I used to go out back and smoke on break and he took 0 bs from anyone who showed potential. He only talked about it once but he was an veitnam army vet, airborne from helicopters,not to rant but he wasn't BS's me and he took no bs. He wanted anyone who was skilled enough to be able to pass the welding test at John Deere Hitachi plant nearby. Please use less heat on your first pass after tacking,all that stopping and starting is fast but no good in Long run. Porosity can happen with gas, always snip the wire even if cost time as it helps not blow through and arc is immediately controllable and hot.the edges and undercut make great crack starting points. If you already have a full pass at lower temps and wire speed the subsequent and required hotter passes will all fuse together seamlessly. My final test in MIG 1 required multiple pass on 2 3/8's mild steel plates with a 30 degree beveled face and a 3/16 air gap between plates. Required jigs to set up and took 6 passes to fill. Cut and rounded plate into 2 strips 7in long by 2in wide and had them bent into a horse shoe basically to test for failure. Long story I passed with weld letting go at 145,000 PSI on gage and this deck doesn't need that good of a job but your technique needs some hood time or a reminder. I done those courses in 2016 straight out of high school and even today I always snip my wire when it gets screwy. I'm into vintage garden tractors so by nature I'd be more careful even though I come to your channel for advice and education,not trying to sound like keyboard warrior trying constructive criticism and not always great at it.
@pnz4aufsh
@pnz4aufsh Жыл бұрын
I can't stick weld to save my life. Plasma torch fast and fun, but check out air arc gouging it's like reverse stick welding. A form of cutting in heavy machinery like revoming welds from huge loader or excavator buckets and their teeth or anything heavy in general. Can be used on 3/8 plates at lower amps and smaller copper coated graphite electrodes.
@scooby196I
@scooby196I Жыл бұрын
hey Dony I have an off-topic question. I recently got a walk-behind mower with a STIGA engine. Have you had much experience with these engines? are they reliable? thanks.
@melvinlazear8068
@melvinlazear8068 10 ай бұрын
donyboy 73 what is the price of this repair vs a new deck i have the same issue with my la155
@Tailloal
@Tailloal Жыл бұрын
Great video as always! In your opinion, do you believe that this repair could have been avoided had the deck been regularly cleaned of debris and/or covered when stored?
@donyboy73
@donyboy73 Жыл бұрын
The bracket still would have broken as it is a weak point. If the deck had been properly maintained it wouldn't be as rusty!
@sgnt9337
@sgnt9337 Жыл бұрын
I thought the same thing. There is no excuse for not cleaning mower after use. Those mowers should never be stored outside.
@stephenP1979
@stephenP1979 Жыл бұрын
Is there a major quality difference between the Stens vs John Deere pulley's? Other than the Stens is a little bit cheaper in price?
@donyboy73
@donyboy73 Жыл бұрын
no difference
@danieleminicucci8159
@danieleminicucci8159 Жыл бұрын
That customer definitely got his moneys worth
@mrboom4570
@mrboom4570 Жыл бұрын
Nice job. No new deck wheels? I change lots of those on the JD 1xx mowers.
@donyboy73
@donyboy73 Жыл бұрын
Customer didn't want new wheels.
@warrenlouisiana2277
@warrenlouisiana2277 Жыл бұрын
I just did that on a Paulan Pro,,,,,
@user-ou6cq1ch6q
@user-ou6cq1ch6q Жыл бұрын
Нужно было бы косынкой усилить!
@philliphall5198
@philliphall5198 Жыл бұрын
Good morning 😃 First
@reginabivona1282
@reginabivona1282 10 ай бұрын
Do you charge to De Grass??
@marcmyers1465
@marcmyers1465 Жыл бұрын
Well Done ! He sure didn't make it easy for you. 😒
@spideyjected
@spideyjected Жыл бұрын
How much do you charge to do this
@liberpater1342
@liberpater1342 Жыл бұрын
What does a job like that cost the customer?
@dclawnmaintenanceandsnowre4099
@dclawnmaintenanceandsnowre4099 Жыл бұрын
I am looking for one hard to find
@donyboy73
@donyboy73 Жыл бұрын
Yes super hard to find! If your machine is in good condition it may be worth buying just the deck shell.
@frankrizzo3915
@frankrizzo3915 Жыл бұрын
This is why I don't mow a wet lawn.
@jameschester3986
@jameschester3986 Жыл бұрын
Clean your deck after each mow
@andrewgee241
@andrewgee241 Жыл бұрын
Are the brackets breaking because owners are stepping on the deck?
@alexxx0777
@alexxx0777 Жыл бұрын
didn't you need a torque wrench to close the blade nut?
@donyboy73
@donyboy73 Жыл бұрын
no
@boblemon2103
@boblemon2103 Жыл бұрын
And some people should just take better care of the equipment, blow it off with your blower or hose it off after every user or at least a few times a year, don’t store it outside is another, clean the bottom of the deck twice a year…
@thyubernoob
@thyubernoob 4 ай бұрын
Look at the crap on top of that deck! Just us a leaf blower and clean underneath once in a while..
@julianreid8179
@julianreid8179 Жыл бұрын
makes you think what a new deack would cost much more no doubt!@!!
@brianmcquirk7428
@brianmcquirk7428 10 ай бұрын
Donyboys sawvilla
@jameschester3986
@jameschester3986 Жыл бұрын
I blow the grass out with my blower
@wayneberry8703
@wayneberry8703 Жыл бұрын
Sorry to say, Dony, but that deck was so dirty. It should have been fully cleaned before handing it over to you! I would have charged him triple the amount.
@jakeschisler7525
@jakeschisler7525 Жыл бұрын
Those decks are pretty cheaply made and the old craftsmen mower i had was the same way.
@donyboy73
@donyboy73 Жыл бұрын
I agree!
3 wheeler new bike fitting
00:19
Ruhul Shorts
Рет қаралды 51 МЛН
Вечный ДВИГАТЕЛЬ!⚙️ #shorts
00:27
Гараж 54
Рет қаралды 9 МЛН
Универ. 10 лет спустя - ВСЕ СЕРИИ ПОДРЯД
9:04:59
Комедии 2023
Рет қаралды 2,8 МЛН
This Part Can Wreak Havoc On Your John Deere Lawn Tractor!
5:56
How To Remove A Broken Bolt From An Engine
5:36
donyboy73
Рет қаралды 27 М.
John Deere mower deck bearing replacement
17:56
Halfmoon TechLabs
Рет қаралды 47 М.
Lawn Tractor Won't Start And Clicks - Step By Step Repair Video
7:33
Pro Tips: Instantly Fix Your John Deere Hood Crack in Minutes!
13:21
How to LEVEL your mower deck (John Deere)
8:35
DIY JIM
Рет қаралды 458 М.
Rusted deck restoration
5:44
Scott Eshelman Redeemed Motors
Рет қаралды 6 М.
ЧАПИТОСЯЯЯЯ😜😜😜
0:14
Chapitosiki
Рет қаралды 29 МЛН
Mastering Zinc Self-Drilling Drywall Anchors & Screws Kit
0:10
ToMoBoxBox
Рет қаралды 8 МЛН
Sigma Girl Past #funny #sigma #viral
0:20
CRAZY GREAPA
Рет қаралды 25 МЛН