I just got one. Did you get yours to work?

Let us know what you think! People would be surprised at how much it changes the experience with these little cheap toys. It’s fun. ;)

For a laugh 👍🏼 I would try that too but I'm sure my cx10 batteries are not good anymore.

Thanks bud! Stay safe.

Let me know if that worked! I'll let you figure that out for me, haha!

@@birdmanomgwtfbbq Ha Ha I got called out. No Prob, will do the ground work and see. May take a month or two but will respond back one way or the other. 😁👍

@@scooterfpv8864 I figured out it does bind to the CX drones. I found it under the model setup.

@@birdmanomgwtfbbq Cool! Gonna have to give it a try soon. Thanks for the info! 👍👊😁

@@birdmanomgwtfbbq good to hear that, may I know which protocol you had selected? I tried CX10 and Q303, test with all sub-protocols, but still cannot make it work. My drone is Cheerson CX-10 (green color). I also tested for my FQ777-FQ03 quad, also cannot get it to work with FQ777 and Hontai with all sub-protocols. no luck

its insane

This hobby is insane

yeah for real xD

Its actually pretty easy to make these cheap... They didn't design the software open tx... So no R n d or budget to design software... The 4 in one module was built by some other tech company in china hence why its popping up in multiple versions of radios now... This means no design for an rf module or receivers to be compatible with it.. Literally all they had to do was make a circuit board that would house all these modules and make a plastic case to hold everything in... I wouldn't be surprised if a finished radio actually cost about 35 quid to make...

Also I forgot to add in the first post there... the cost of components like the switches screen ect become remarkably cheap when you buy in industrial bulk... 1 switch might cost 70pence but 6000 of them would probably be less than half that...

Thanks bud! Caught that in post but let it slide. ;)

Me neither man couple of weeks for me and then im ready to fly!!

Protocol 23 -FQ777 for model FQ777-124 (with SV7241A) Protocol 26 -Hontai Several sub-protocols including Sub - 3 for FQ777-951-3 Might be other to try i the newest list. It can also be a problem caused by needing to tune the Transmitter out put frequency to suit the out-of-tolerance components used in some cheapies on some protocols. Read the full details in Pascal Langer's github list and keep up to date with developements on the RC Groups Forums DIY-Multiprotocol-TX-Module

Yeah the drone community will have to make it a little more user friendly if they want to get anymore support and people getting involved.

Hey Josue! This is an excellent radio. Ive never had problems with it. This will do Spektrum and many other brands. However, Spektrum will give you a little more distance on your range (not sure that really matters unless you are doing long range FPV). For an intermediate, Spektrum will be slight easier to understand. That said, this radio is much more capable of growing with. This has replaced my Dx6i. Features like stabilization are actually in the model and not radio. You would need something like flitetest's FT Aura. It can be found on here on KZfaq.

That is correct. It has a built in module that can switch between all these protocols.

Hey bud. Beta flight is used for setting up aircraft with programmable flight controllers. These little “toy” quads are not programmable. They won’t hook up to beta flight so the only programming you can do is on the radio side. I noticed you also asked about the bugs. This radio does have some models from bugs programmed in but if you are new to all this stuff it might be frustrating and difficult to figure out. I wish I could make a long series of videos helping people breaking in to the hobby but sadly I don’t have the resources to purchase all the equipment to make it happen. The channels that are given products and resources for free and make money through KZfaq views have to spend all there time just reviewing products to keep getting high view counts and free stuff. You should get on the forums. That’s where the real help is. Not KZfaq.

graywoulf When you try to bind do the flashing lights on the quad change at all? That will be the indication that you found the right protocol. If the lights turn solid it has bound. Just cycle the throttle. That arms the quad. For those that thought the throttle arming process was programmed in the radio...it’s not. It’s programmed in the quad so even with the tx16, you will have to cycle the throttle to arm. If you can’t get the lights to change it’s probably a cloned Cx-10. I have had several clones that I can find the protocol for in the radio. Same with Syma. There are generic Syma cx5’s for sale on eBay that will not bind either.

That is just the setup wizard, you can exit the setup wizard and manually configure the model like normal.

Hey bud. Yes, this radio will bind to any Spectrum protocol. Channel mapping is the tricky part though. In my opinion, open tx (this radio’s os) is not intuitive at all. Maybe I should do another video on channel mapping. Not sure what vids are out there on it.

Joshua Bardwell did a really good video on the range of the radio master and jumper and the results are very interesting. Just search “Joshua Bardwell tx16s range test. It was quite convincing for me.

@@buudy22 The problem is that I am in the UK, and I believe Joshua is in the States. The legal limit for radio output power in the UK is half of that in the US, so could make a significant difference.

F C I hope you found your answer. I haven’t run into that problem. I wish I could help.

@@buudy22 Hi. The seller is telling me that they are talking to the factory and they say this is normal. Yeah right. Anyhow. I contacted Radiomaster directly and they are going to send me new gimbals. : ). Thanks.

Is the screen even showing airplane as an option? Does it only show glider and nothing else?

There are several really technical threads around the internet as these protocols are being hacked and shared but I just use trial and error. Lol. The Cheerson cx10 works great and I have found a couple others that work too. Good luck and thanks!

@@buudy22 Thank you :D

As of the making of this video, OPEN TX setup wizard which is the the software this radio runs on doesn’t offer quad setup. Only plane. Understand that is just for the setup wizard. You can skip all that if you want and set up everything in the model settings including swashplates for helis, differential thrust, etc. this is the most versatile radio I have ever played with. That’s me coming from a spektrum background.

Drew Graham It depends on the Cx-10. I have gotten one to bind to it but another didn’t. I think there are a lot of fake cheerson Cx-10’s out there.

Not yet. I’ve played around and gotten a couple quads to do the dual rates but I haven’t figured out flips on any of them yet. My guess is they are deep in the channel mapping (not on channel 5 or 6). Either way, if you felt the difference you probably wouldn’t care about the flips. :)

C Kauffman Hey bud...did you see there are sub protocols listed to the right of cx10 you can try? I just got burned by a clone syma x5c off eBay thinking it would bind up and it didn’t. Who would have guessed...Chinese clones of Chinese cheap products!

@@buudy22 yeah i tried them all with no joy

ive tried em all now with nothing working.... oh well

C Kauffman did you get it off amazon?

@@drewbooFPV Yes ASIn-B00M6HP1HM

nal0s0ljah I tried but could not find a good protocol for it. Looking online seemed like eachine used some odd protocol that the community never hacked.

@@buudy22 thank you for the reply!

@@buudy22 i got my radio today and got it to bind with the e010. I used the MJXq E010 mode and set the receiver No. to anything besides 0 currently have it on 8. And changed rf Frequency fine tune to anything but 0 also. But am having a problem when I push full stick forward it goes backwards...I have to push reverse to go forward...is there something I need to change in the settings to flip this? Thanks

nal0s0ljah way to go bud!!!!!! Seriously. Nice work. It’s so much fun flying those little cheap quads with such a great feeling radio.

So it works by changing frequency tune to 1. And to fix the pitch problem go to mixers and change Ele weight to -100%

Depends on receiver. But well beyond line of sight.