Radiomaster TX16s Setup • Complete Start to Finish Tutorial • [Beginners]

Рет қаралды 199,637

4 жыл бұрын

Radiomaster TX16s Setup - How to setup your new TX16s from rcvideoreviews.com is a COMPLETE setup guide for the Radiomaster TX16s. In this video, I review system options of the radio including demonstrations of what the options do. I cover usage of the LUA tools menu, managing the tools displayed on that menu, SD Card navigation, hardware calibration, and much more.
If you want a detailed review of the system setup options of this radio, you've found the right video.
Here is the @UAV Tech video I referenced describing the ADC option in detail:
• OpenTX ADC Filter: Dis...
Join me on Patreon: / rcvideoreviews
Please use my affiliate links for Amazon and Banggood. Anything you buy using my links will generate a small commission for the channel:
Amazon: amzn.to/3lEz5ZL
Banggood: www.banggood.com/custlink/3DD...
T-Shirts: teespring.com/stores/rcvideor...
RCVR Amazon Basics List
Solder Station Heavy Duty Helping Hands: amzn.to/32WInJN
ToolkitRC WM150 Watt Meter amzn.to/2A13Ogu
Generic Watt Meter amzn.to/377epmg
10 Pack XT60 Connectors with shrink tube: amzn.to/2zVBWdB
50 Pack 3.5mm Bullet Connectors: amzn.to/3dw8pot
10 Pack 300mm Servo Extensions: amzn.to/3dVBRoi
Heat Shrink Tubing: amzn.to/3ezjIxB
ZTW 10a peak/6a cont BEC 6v/5.5v/5v: amzn.to/2ZdAA6S
ZTW 40a ESC with XT60 Installed: amzn.to/3fPu2ll
ZTW 60a ESC with XT60 Installed: amzn.to/2CqrNGH
ZTW 80a ESC with XT60 Installed: amzn.to/2ZLIUuS
ZTW Programming Card: amzn.to/2BuHZqb
MG90s 9g Servo 5 Pack: amzn.to/315Kmuh
ISDT LiPo Balance Checker: amzn.to/2Z0HOee
Generic LiPo Balance Checker: amzn.to/3drCO7B
FrSky S6R Rx with Stabilizer: amzn.to/320IrHU

Пікірлер: 560

@longjammeriii3323 4 жыл бұрын

This is the most thorough setup tutorial I've ever seen, thanks so much again, especially for an old newbie like i am, my best regards from Alan in the UK 😊😊👍👍

@RCVideoReviews 4 жыл бұрын

Thanks for taking the time to comment. I’m glad you found it helpful. Best, J

@r.ccustomtruckingsydneyaus4632 3 жыл бұрын

@@RCVideoReviews can u charge the controller with the usb cable provided . or what charge cable do i need to charge through the controller . thanks buddy . love your vids

@RCVideoReviews 3 жыл бұрын

@@r.ccustomtruckingsydneyaus4632 You can charge the radio with the included USB-C. I've charged it from just about any USB charger I have laying around including Apple, Desktop, and a Laptop USB-C AC power supply. They all work.

@CliffHarveyRCPlanes Жыл бұрын

Looks like I'm following in your footsteps Alan 👍

@WTJimmy 4 жыл бұрын

Excellent beginners setup tutorial John. I’m a total newbie with this radio and OpenTX, but your teaching style work well for me. Thanks for taking the time to share your experience with this radio and software! Jim

@RCVideoReviews 4 жыл бұрын

You're welcome. This isn't exactly exhilarating content but I know if I read something and say, "I wonder what that means" I can't be the only one. Thanks for the comment, J

@pricedempler 3 жыл бұрын

This entire series is fantastic! Clear, organized information and excellent video work. Videos are logically broken down for easier consumption. For me as an old Heathkit/Futaba/HiTec/Spektrum guy I got into drones and this radio is so perfect! Lots to learn but with these videos, I am learning fast - I will be putting all of my planes (and drones) on this platform thanks to the lessons learned here. Thank you for this great work!!

@RCVideoReviews 3 жыл бұрын

Wow, thanks! Glad you've found the material useful. Thank you.

@WaynePilot 3 жыл бұрын

I'm already a subscriber to the channel but still I want to say it again: you're probably the most beginner-friendly rc guy on KZfaq. Great video! I can always learn something by watching your reviews/tutorials. Thank you👍

@RCVideoReviews 3 жыл бұрын

Glad to hear it. Thanks for taking the time to write.

@williamnale7835 2 жыл бұрын

Very clearly produced. Clear voice, good pace and clear videography. Definitely subbed as I received my TX16X Blue Max today..

@RCVideoReviews 2 жыл бұрын

Welcome to the channel. Thanks for the kind comment.

@MrRandomlamer 3 жыл бұрын

I just bought one of these radio and am a total noob so I was thinking I maybe bit off more then I could chew but these videos have basically changed that. Thank you so much !!

@RCVideoReviews 3 жыл бұрын

Very awesome to hear that. I'm glad they're helping you rein the radio in. It can be a little much at first, but once the light starts to go on, you'll find out you can do just about anything. Thanks for watching and the nice comment. J

@iancurry8504 3 жыл бұрын

Fantastic series of tutorials! Thank you for doing them.

@RCVideoReviews 3 жыл бұрын

You're very welcome!

@seattleitefpv 2 жыл бұрын

Thank you! I just got a TX16s MAX and I found this tutorial very useful. Loved the bloopers at the end as well ;). You got a new subscriber!

@RCVideoReviews 2 жыл бұрын

Thanks for the sub and welcome to the channel.

@bremsen159 3 жыл бұрын

what a great vid!! the temp is good , clear talk, good soun, good explaining, good visuals.. subscribed!! thx

@RCVideoReviews 3 жыл бұрын

Thanks for the sub!

@markstevens5442 Жыл бұрын

Just bought mine and it arrived today so I'll be having a good look through your videos to learn everything :)

@RCVideoReviews Жыл бұрын

Have fun. It’s a solid radio.

@graywoulf 3 жыл бұрын

Most awesome rundown on the setup features of this great radio!! Thank you very much as I just ordered one today. I subbed as well. 👍👍😊

@RCVideoReviews 3 жыл бұрын

Welcome aboard! I have all of the tutorial videos organized into playlists to make them easy to find: Beginner Topics kzfaq.info/sun/PLy3TC1ILJYTjqDXFB84oXVWZG14zyMYYt Intermediate and Advanced Topics kzfaq.info/sun/PLy3TC1ILJYThzwReZComrM-LFTa2wfiUW Have fun with your TX16s, it's a really good radio.

@passinthru4328 3 жыл бұрын

Hey Man, where were you when I first struggled to learn OpenTX on my Horus a couple of years ago?! Your voice and detailed, thorough and easy-to-understand explanation reminds me of the late great JC of Project Blue Falcon. He was the best. Please keep doing what you're doing because it's needed.

@RCVideoReviews 3 жыл бұрын

I actually did a number of OpenTx videos a couple of years ago but they never got any traction. This second round took though, so I built a good sized library and have move on the way. Appreciate the comment and welcome to the channel.

@andreaspap 3 жыл бұрын

A big thanks for this great video. it helped me so much. and all the other video you made. i just got my TX16S and i was a little lost. i am new in the hobby and i needed your videos

@RCVideoReviews 3 жыл бұрын

Glad I could help!

@bw162 4 жыл бұрын

Great video and series. Very complete and well articulated. Anyone that thinks they didn’t learn anything is in denial.

@RCVideoReviews 4 жыл бұрын

Thank you George! Appreciate the comment and glad you found the video useful.

@AviationAngler Жыл бұрын

I was considering buying this and after watching this video I'm definitely getting this I love how user friendly and awesome this radio is thank you sir

@RCVideoReviews Жыл бұрын

You're welcome. Enjoy.

@moayed70 3 жыл бұрын

Perfect instruction in details. love that as a newbie. Thanks. Subscribed and liked. Amir from Sydney.

@RCVideoReviews 3 жыл бұрын

Thanks and welcome. Glad it helped.

@Obi1kanObi 3 жыл бұрын

Thank you so much for this! This is like a full-on course/class on this. As a complete noob, I'm super intimidated by this hobby but really want to get in. I have no idea what I'm doing and no previous experience in anything even remotely (no pun intended) related to anything radio or FPV related. I'm following along very intently trying to keep up even though I don't understand any of the numbers, settings, frequencies, charts, words, terms, or what any of the jargon means but I'm super excited to do this and you're making it accessible for me by even having this! Even though I'm still early and confused I have no idea how anyone would navigate this without a video like this. Since I am hesitantly investing the limited money I have into this hobby I very much appreciate you putting this up!

@RCVideoReviews 3 жыл бұрын

You're very welcome. I have a pretty large library of OpenTx material, so just take your time and have fun with it. Don't be afraid to play with different settings on the radio. You can't hurt anything until you actually start to fly.

@Obi1kanObi 3 жыл бұрын

@@RCVideoReviews Awesome, I just subscribed and liked! Been watching videos and messing with it since I got it. Right now I've been stuck trying to find out why when calibrating the elevator won't go down under center when I bring the right stick down and it snaps to the top when I push it up. The ele only moves invertedly when I move the left throttle stick up and down and it never goes down past the center when I pull the right stick down. When the throttle is down at idle and right stick at the center the channels read like this: 02 Ele 46% 03 -100% and if I pull the left stick down it stays at 46% and when the throttle is at 0% the elevator stays at 0% and never goes under, it only snaps up to 66-100% or is none of this even a problem and that is exactly how it's supposed to work?

@RCVideoReviews 3 жыл бұрын

@@Obi1kanObi Are you sure you have mode 2 set on the bottom of the system page?

@Chris-xt7rs 4 жыл бұрын

Thanks so much ! Now I need to watch all of your stuff. Subscribed.

@RCVideoReviews 4 жыл бұрын

Awesome, thank you! You’ll be able to binge watch for a while ;)

@OVERKILLFPV 3 жыл бұрын

Video extremely informative. Will be saving in library when my radio comes in.😁

@RCVideoReviews 3 жыл бұрын

Glad it was helpful! In case you didn't know, I've added these tutorial videos to playlists organized by skill level: Beginners kzfaq.info/sun/PLy3TC1ILJYTjqDXFB84oXVWZG14zyMYYt Intermediate/Advanced: kzfaq.info/sun/PLy3TC1ILJYThzwReZComrM-LFTa2wfiUW Hope that helps...

@yervantarabian5314 3 жыл бұрын

Wow an amazing channel and of course Video!!! I just got subscribed Thank you so much from Canada!

@RCVideoReviews 3 жыл бұрын

Thanks and welcome. Thanks for watching.

@missiletm 3 жыл бұрын

Excellent content. You do a great job explaining everything. Subbed! 👍

@RCVideoReviews 3 жыл бұрын

Thanks and welcome to the channel.

@terryspence8567 3 жыл бұрын

Thanks for an excellent tutorial it really helps. Clear an concise explanations I look forward to watching the videos in the series. Seasons greetings from Yorkshire England.

@RCVideoReviews 3 жыл бұрын

You're very welcome! Happy New Year. Thanks for watching.

@upperechelon3456 4 жыл бұрын

This is a very thorough review of the Radiomaster. I found it most informative. Subscribed. Greetings from Florida. Thank you

@RCVideoReviews 4 жыл бұрын

Welcome aboard!

@warbuzzard7167 3 жыл бұрын

More super-helpful content from RC Video Reviews!

@RCVideoReviews 3 жыл бұрын

Glad you think so!

@DavidReynolds-kr6yh 4 жыл бұрын

Definitely love the stuffups at the end, very funny.

@RCVideoReviews 4 жыл бұрын

It's comical sometimes how the mind knows what to say but the mouth disagrees. Glad you enjoy them.

@pnaty97 4 жыл бұрын

Thanks for a nice clear walkthrough 👍

@RCVideoReviews 4 жыл бұрын

No problem 👍

@megakillyt4549 2 жыл бұрын

Love you bro you are still making vids, one day you will become a successful youtuber

@fredmorton4291 3 жыл бұрын

Great video! I just got my Radiomaster yesterday and am now waiting on the battery that'll go in it. In the meantime, I'm watching as many tutorial videos as I can find. This is one of the best. Thanks for posting!

@RCVideoReviews 3 жыл бұрын

Thanks for the kind comment. Glad it's been helpful for you.

@canadiandronepilot7535 3 жыл бұрын

Brilliant ! Glad I found your channel - Subscribed 🇨🇦👍

@RCVideoReviews 3 жыл бұрын

I'm glad you found it too! Welcome to the channel.

@leong5527 4 жыл бұрын

Great tutorial, very helpful, Thanks!

@RCVideoReviews 4 жыл бұрын

You're welcome!

@davidb2371 3 жыл бұрын

Great tutorials, thank you. subscribed

@RCVideoReviews 3 жыл бұрын

Awesome, thank you!

@williamdunn268 3 жыл бұрын

Thank you so much for this video. Great help and well done.

@RCVideoReviews 3 жыл бұрын

You're very welcome! Thanks for watching and commenting.

@SkyPilotFPV 3 жыл бұрын

Nice work mate. Watched the lot! Great help. 👊🍻👍🌟🏅

@RCVideoReviews 3 жыл бұрын

Well...now you know all [almost] my secrets. Glad they helped. J

@ludwigvanzappa9548 3 жыл бұрын

Dude , you're good at teaching! Thank you so much!

@RCVideoReviews 3 жыл бұрын

I appreciate that! Thanks for watching.

@BigSmileNow2010 4 жыл бұрын

Finally someone who is explaning everything !!!! thxxxxxxxxxxxxx

@RCVideoReviews 4 жыл бұрын

You're welcome! Glad the video is helpful for you. J

@cjfpv 2 жыл бұрын

Nice video, thank you for the training!

@RCVideoReviews 2 жыл бұрын

Any time!

@TheRealOzWookiee 3 жыл бұрын

Hey man, new RC Flyer here and love you videos.

@RCVideoReviews 3 жыл бұрын

Glad you like them. Make sure to subscribe and hit the notification bell so you know when new videos land. Welcome to the channel!

@sleepingbearffg5008 3 жыл бұрын

Thanks learned a few things myself. Good job👍👍👊👊

@RCVideoReviews 3 жыл бұрын

Glad to hear it! Thanks for commenting and watching.

@michey7822 3 жыл бұрын

Thanks! I got mine today and this is just helpful

@RCVideoReviews 3 жыл бұрын

Very glad to help.

@andriy1000 Жыл бұрын

Thank you for the comprehensive manual

@RCVideoReviews Жыл бұрын

You're welcome.

@katyelvissilva5997 2 жыл бұрын

Very good video!

@RCVideoReviews 2 жыл бұрын

Thank you very much!

@thedwighty 3 жыл бұрын

Great video! Very informative.

@RCVideoReviews 3 жыл бұрын

Thank you!

@MrVasmikey 3 жыл бұрын

This is actually more of OpenTx tutor than Radio type tutorial. Still great.

@sleepingbearffg5008 3 жыл бұрын

All a radio is Sticks...Gimbles.. open tx and Crossfire betaflight run the show... lol love Hobby

@RamGen1 3 жыл бұрын

Excellent tutorial. SUBBED.

@RCVideoReviews 3 жыл бұрын

Welcome!

@hawkskyflier Жыл бұрын

BLOOPERS!!!! The world loves bloopers... HAHAHA!! Thanks for sharing, great teaching video, Thanks a ton!!

@RCVideoReviews Жыл бұрын

Glad you enjoyed it!

@660402foil 3 жыл бұрын

OK, very helpful, Super, Thanks!

@RCVideoReviews 3 жыл бұрын

You're welcome!

@peterjensen3162 3 жыл бұрын

Great tutorial, love your calmness and voice. Radiomaster ordered and you got a new subscriber.

@RCVideoReviews 3 жыл бұрын

Welcome to the channel Thanks for watching and I hope you enjoy your new radio.

@TWISTEDSTRINGS69 3 жыл бұрын

FREAKIN EXCELLENT !

@RCVideoReviews 3 жыл бұрын

Thank you.

@robertwioch3691 3 жыл бұрын

Hi! Very good Information on the radio. This is Robert Wioch. I will give you always a Thumps up. you are the best out there. AAAAAAAAAA++++++++++ :))

@RCVideoReviews 3 жыл бұрын

Wow, thanks

@thomasallan8113 Жыл бұрын

Had little problem following thou there were a few screens slightly different maybe because I have no planes yet. Wonderful video

@nnsense 3 жыл бұрын

You're right, subscribed :D

@RCVideoReviews 3 жыл бұрын

Welcome aboard!

@erad05 3 жыл бұрын

thank you so much for demonstrating and explaining. At least I'm able to configure my Jumper T18 which is very similar.

@RCVideoReviews 3 жыл бұрын

You're welcome. All of the OpenTx videos I have using the TX16s as the demo unit will also apply to the Jumper T18. From a software standpoint, these two radios are identical.

@mjrteks 3 жыл бұрын

I have followed and subscribed to the channel, to learn how to use the Radiomaster TX16S and it is effectively the most enlightening that I found. Congratulations to the channel and keep it up. I bought a radio like this, although I haven't received it yet (Black friday), but one question I wanted to clarify is the following: On Radio Setup the Default channel order that is in AETR, if you change to any other such as TAER, everything will be fine or there will be a problem, as it says in the manual : "Because the channel input order of the built-in multi-protocol transmitting module of the RadioMaster TX16S remote control is AETR, in the Default channel order option, be sure to select the AETR order '" Therefore, I don't see the interest in having more options besides the ATER option if there may be any problems in the future Thank you and my best regards from Portugal.

@RCVideoReviews 3 жыл бұрын

Glad to have you. Thanks for joining.

@oliverpolden 3 жыл бұрын

I used to think my DX8 was quite advanced, now I see this, it seems like it's from back in the stone-ages!

@RCVideoReviews 3 жыл бұрын

OpenTx is a very capable platform. I still learn new things on a regular basis.

@clintonponcejr9728 Жыл бұрын

Thanks!

@RCVideoReviews Жыл бұрын

You're welcome and thank you for hitting the tip jar! Appreciate it.

@joelyfpv7075 Жыл бұрын

Such a good controller

@RCVideoReviews Жыл бұрын

Agreed.

@RosscoStixFpV Жыл бұрын

I think this radio will be a perfect upgrade from my QX7

@SultanAlawad 3 жыл бұрын

Thanks a lot.

@RCVideoReviews 3 жыл бұрын

You’re welcome.

@overfly_pt 3 жыл бұрын

Thanks for help 👍👌🙏

@RCVideoReviews 3 жыл бұрын

Happy to help. Thanks for watching and commenting.

@softstart100 3 жыл бұрын

Thanks again; why I messed my controller up shorted the main board when charging some how and ordered and replaced it. Then I went to set everything up and the sdcard was corrupted. Ok now all is good so I just started swallowed my pride and started over again including backing up all my data on this TX16s. Always leaning something. Thanks again.

@RCVideoReviews 3 жыл бұрын

Glad to help. Hopefully your issues are in the rearview mirror now.

@goldenthepot6361 3 жыл бұрын

yes very clear thanks.is there a video to set up aux switches in betaflight?

@Rip1Outdoors 3 жыл бұрын

Subbed and thumbed thanks

@RCVideoReviews 3 жыл бұрын

Welcome to the club :)

@saunoraprom522 3 жыл бұрын

Thanks for the clear Tutorial. Is it possible to give another tutorial on how to setup two Radiomater TX16s to bin with one Receiver? Thank you again

@RCVideoReviews 3 жыл бұрын

I discuss it in this video briefly: kzfaq.info/get/bejne/h8d1ldFqt5y1d5c.html As far as I know, there is only one way to do it: 1) Get the source code for the multi protocol module. 2) Edit the source code and key in your own global unique identifier. 3) Compile that source code and flash both radios with it.

@AngryPepper1964 3 жыл бұрын

Damn brotha, another sweet cini🤪

@RCVideoReviews 3 жыл бұрын

What's a cini?

@AngryPepper1964 3 жыл бұрын

@@RCVideoReviews sorry John, I replied to this video by accident. It was supposed to be to Drone Camps about a new CiniWhoop quad.😂

@standardman6535 Жыл бұрын

it's 2am, I think it's time I stop watching tutorials on how to use OpenTX 😂

@RCVideoReviews Жыл бұрын

I've been using these radios for about 7 years now and I still learn new things on a regular basis. Enjoy the journey.

@alumahomeinspections7009 3 жыл бұрын

Hi, Thank you!. Your videos about Radiomaster TX16S were very important to me since I got mine last week. I am doing my first steps on FPV and naturally I have a lot of questions. I could setup and fly a Tinyhawk Freestyle 2 last night and my first impression is the quad lighting speed reaction of my Radiomaster sticks over all throttle. I was flying indoor hit ceilings walls but I think I could easily lost the drone if I was outside. Is there any way to make the sticks or the quad less responsive? to get more controllable maneuvers? Thank you again!

@RCVideoReviews 3 жыл бұрын

Hello there! Just add some expo to your throttle input. This video will show you how to add expo. You do not have to use the slider though, you can just hard code a value like 30 or 40.

@diazg4468 2 жыл бұрын

Absolute enriching! Thanks for the tutorial. It helped me loads. I’m trying set up my governor in the TX16S, how do I assign a GOV channel? I’m using Microbeast Plus and CH 8 is for GOV. Appreciate your guidance.

@RCVideoReviews 2 жыл бұрын

I haven't used a microbeast so I don't know exactly how to help. What I can say is the mixer is what maps the channel numbers to the receiver. So if you need something on channel 8 you put the device on channel 8 in the mixer.

@petercane6376 2 жыл бұрын

I have just bought this tx and I love it although it will take me time to learn all these terms. It is assumed that I know what Haptic, ttl , rssi and so on means! I feel quite stupid as I just dont know. I got 80% of what you said and it was a very informative video and a biv thanks. Question...is there a website or link you can give me that explains all these terms please?

@davidgrubb354 Ай бұрын

Loved this video for future reference, but I'm stuck after working with Velocidrone and RadioMaster TX16S support staff trying to get them talking to each other and just have the transmitter act as a joystick controller for the Velocidrone SIM. We have failed after a week of trying this and that and the time it takes for them to respond to me and me to them is killing us as far as efficiency. Other words, we wasting a ton of time on a simple thing. I felt like someone else had to have experienced this same issue so I've found KZfaq to be a valuable resource at times. I thought I nail it when I saw your video. But it never discussed using the transmitter as a joystick other than how to put it in Joystick Mode. We can of knew that one. I was wondering if you could make or direct me to a video you've already made on just the basics of how to unbox it, how to connect it to your Windows 10 or higher PC and including maybe one of the most popular simulators made by Velocidrone out there that most racing pilots are using to practice and get started with. I was told I may need 100 hours of SIM time before I should go buy a real drone. True or Not? Don't know. But I just can't seemed to get started. I feel like we all are missing something very simple and just have not figured out what yet.... Please help or send me to someone who can? And I am willing to pay for consultation.....up to a point... LOL

@elikjacobson7544 3 жыл бұрын

Hi, great videos !, can you please help/refer me how to bind the tx16s to frsky rx8r pro reciver ?

@RCVideoReviews 3 жыл бұрын

What's the problem? It should work in FrSky D16 or FrSkyX D16 depending on your firmware in the Rx. FRSKYX - 15 Models: FrSky v1.xxx receivers X4R, X6R and X8R. Protocol also known as D16 v1 FCC/LBT. FRSKYX2 - 64 Same as FrskyX but for D16 v2.1.0 FCC/LBT.

@AhmadFPV Жыл бұрын

Hello, thanks for the detailed review. Do you thing dji controller (V1) is safer in term of flyaway as connection not pids. For example, if the throttle not 0% does the quad start? As a general question, is Crossfire safe as dji fpv RC? Thanks man

@MrPolymers 2 жыл бұрын

Nice job! I'm a 107 certified Drone pilot and just received my new Eachine's version of the TX16S. Wow, it's very confusing to me coming from a Jumper T8SG. The problem I'm having is transferring the models from the old Jumper T8SG as it's not indicated on the open TX companion 2.3....

@RCVideoReviews 2 жыл бұрын

I'm not familiar with that radio. Does it use OpenTx? Have you tried just flashing EdgeTX? Make sure you back up your data first.

@a10nmw 4 жыл бұрын

Great video as always. I am using 18650 batteries. What would be the value for Low Battery Alarm setting ?

@RCVideoReviews 4 жыл бұрын

Read this: batteryuniversity.com/learn/article/confusion_with_voltages 6.2v for 2x cells should be ok.

@alumahomeinspections7009 3 жыл бұрын

Hi, I followed your videos to setup my Tinyhawk Freestyle 2 with my Radiomaster TX16S and they working really fine, Thank you very much!. My question now is that I got a Nazgul5 V2 and should I make another model on the transmitter or I can use the same Tinyhawk model configuration? Can I fly the Nazgul5 V2 with the Tinyhawk model?

@RCVideoReviews 3 жыл бұрын

You'll have to contend with the receiver bind if you're using receiver numbers. If you're not using receiver numbers, you probably can use the same radio model to fly both. I would personally just the Tinyhawk configuration to "duplicate" and setup the Nazgul5 with its own settings. That said, there is no technical reason a single Betaflight/iNav setup won't work for multiple craft of the same type.

@bobglover100 3 жыл бұрын

Thanks for your excellent video. I have a problem in that failsafe mode is missing from the set up screen on my Radiomaster tx16s. I would be most grateful for your advice. Best Regards Bob

@RCVideoReviews 3 жыл бұрын

What receiver are you using?

@bobglover100 3 жыл бұрын

@@RCVideoReviews Thanks for your quick reply. I have only used assan & radiomasterR86C receivers. The R86C is being used with aZOHD controller. I wiil be using Hitec optima receivers in the future. Best regards Bob

@grantfoster9099 Ай бұрын

Is there a button to do safe select on the bnf planes?

@budnanc509 Жыл бұрын

This old brain is trying to get my quad "Inductrux" into the 16s without any luck. I found a printout of the quad Horizon Hobby BLH8516 FPV pro manual. Every time a set it up something does not work. Each time is something else.... How do you see it being done? Thanks for any help. Continued success.I have it bound, armed, 1 flight mode. It still way far from where it should when properly setup in the radio. It flys, some control, no hover or change in flight modes. Looking forward to hearing from you and your instruction.

@JeSSTeR81 Ай бұрын

So nice walkthrough, but I am brand new to flying… have had old school rc cars of every type! How did you get crossfire configure on there? Ordered the Cinnabot 3.0 with crossfire and have the radio master crossfire module in route… trying to get things dialed in so I can be ready to fly, but I’m unsure where to start

@gazzabyerun9048 2 жыл бұрын

Nice video, newbie old timer to rc, i find it overwhelming when it comes to open TX but hopefully it will sink in the brain bucket!! After watching you're other video's came across this one, I am a RTF guy but i want to learn on open TX and get a radio master radio so i can start getting better rc planes, not many choices for RTF planes! Do you have a video showing how to program and bind a plane from start to finish? Thank you very much, Semper Fi!

@RCVideoReviews 2 жыл бұрын

The Radiomaster TX16s comes with a multi-protocol module which lets you bind with all kinds of different receivers. I do not have a video showing how to bind with every receiver out there, but I have done a number of videos showing how to bind with some compatible receivers. kzfaq.info/get/bejne/prqPZJyBu664o4k.html kzfaq.info/get/bejne/gMyooNpekpemops.html

@gazzabyerun9048 2 жыл бұрын

@@RCVideoReviews Awesome, thank you for pointing me in the right direction! Semper Fi

@jr63 3 жыл бұрын

Is the transmitting power higher/lower when you change the country code like DJI?? Great video, thanks for sharing..

@RCVideoReviews 3 жыл бұрын

That I do not know.

@captaindronieversefpv 2 жыл бұрын

What battery are you using ? What should i take for the battery range if i use 2 battery 3,7v ? Thanks

@Flippiedeflap 3 жыл бұрын

That play delay feature is a basic SW debounce on an input. It's very common to implement on any input of a processor, especially mechanical switches as these litterally bounce a couple of times upon switching. To us humans it's indetectible, but these electronics pick them up very easily, as they can scan them a couple of hundred thousand times a second, or even millions of times a second.

@jerryzito6840 2 жыл бұрын

Great video thanks. I have a QQ 300 Extra plane. It has an Aura 8 receiver, that had Spectrum satellite receivers. To the point. When you bind the plane, it automatically sets up a three-position switch for flight modes, normal, advanced, and 3D. I know, get to the question already. I don't think the Radiomaster would have received that mode. Is there a way to do it on the RM?

@RCVideoReviews 2 жыл бұрын

Probably-you just need to learn what channel the other receiver used and put a 3 position switch on that channel in the mixer on your RM.

@kawasakizx14jomamamoto57 Жыл бұрын

I have watched a lot of your videos on the radio master tx16s. Have you ever done a video on setting up talerons? I am trying to set up a freewing 90mm f22 with tailerons. There is guy on you tube that has done this with a spectrum ix20 transmitter and I am trying to emulate his radio with my radio master tx16s.

@RCVideoReviews Жыл бұрын

kzfaq.info/get/bejne/i5Z2oLuBlry3nZc.html

@53roger Жыл бұрын

Hello, thanks the video i setup my radio as i watched the video. I am new to edgetx and just got a new RMTx16x Mkii with 2.7.1. I need to update the firmware so I will have options for R9M but i'm not sure where/how to do that. I opened Edgetx 2.7companion and setup my radio profiles and then in settings i 'checked' flexr9m and lua. then went to file>download but the download was greyed out (not active). Could you point me in the correct direction?

@user-mq2ok5bt2i 2 ай бұрын

what is enalbe max throw under internal rf mean? if i switch it on, throttle runs even though kill switch enabled? also is the RF protocol x2f? how do you exit range test?

@drewbooFPV 3 жыл бұрын

Can pick what switch you want for armining in betaflight or do you have to set that on the controller

@RCVideoReviews 3 жыл бұрын

On OpenTx you can assign whatever switch you want to whatever channel you want. In Betaflight it looks like you can pick whatever channel you want to arm although every guide I've read shows it on Aux1 or Channel 5. So what I would do is set a Mix Line with the Switch you want on Channel 5, then in Betaflight configure Aux1 for Arm. That should do it. If not, experiment a little. On OpenTx you can map whatever switch you want to whatever channel you want.

@StevePotter 4 жыл бұрын

Thanks, that is very helpful!! I would like to set up head tracking servos on a camera gimbal. The goggles send out pan and tilt commands (from its accelerometer) on a cable that plugs into the trainer port. How do I transmit those to the flight controller? How do I even see them on the Radiomaster? I chose channels 5 & 6 on the FPV goggles. But the trainer screen on the TX16S only has channels 1-4.

@RCVideoReviews 4 жыл бұрын

On your inputs screen create two inputs: 1 on Channel 5, one on Channel 6. Use TR5 and TR6 as the source. Add those inputs to your Mixer on Channels 5 and 6. Done.

@StevePotter 4 жыл бұрын

@@RCVideoReviews Thanks. That was not quite "done". I still got nothing on the Monitor when it was all wired up and goggles on. By watching Painless360 I learned I needed to set up a Special Function switch to activate Trainer mode: SF2 SC:up Trainer Chans box ticked Then I see the head tracking appear in the Monitor for Ch5 and Ch6, as long as switch SC is up. It makes sense that you would need a switch if you were training someone to fly. But I want this on always.

@RCVideoReviews 4 жыл бұрын

@@StevePotter Load the model, in special functions under any blank add the following: Switch -> ON Function -> Trainer Chans and put a checkmark in the box at the end. You asked a question about getting the trainer channels 1-4. I thought you understood you had to enable them. My bad.

@randylewis5199 3 жыл бұрын

Finally got subscribed, sorry it took so long. I think I have viewed most of your videos and they have helped tremendously. I am trying to get my neighbors radio to show the throttle icon on the input page but it will not do it, it only shows 3 dashes in place of the icon. Cant figure it out, tried to find that in you videos but no go. Any help would be appreciated. Keep up the good work.

@RCVideoReviews 3 жыл бұрын

What happens if you create a new model and exit out of the wizard? Do you still see an issue?

@randylewis5199 3 жыл бұрын

I have created 3 models I believe and it is always like that. Not sure what he did when he got the radio to cause this. I even updated the firmware and SD card but no luck. I have sent a question to Radiomaster to see what they say but not sure how responsive they are. I do appreciate your quick response, Thanks

@nickrich710 2 жыл бұрын

I just brought the radiomaster tx16s I have a cinewhoop coming in tomorrow trying to learn how to set it up for the first time with the radiomaster t16 s

@RCVideoReviews 2 жыл бұрын

You should check into our discord: discord.gg/jSFTASU Plenty of people there who can help if you need it.

@nickrich710 2 жыл бұрын

Thank you

@JRIVERA1124 2 жыл бұрын

Need help on flysky i10 -fsi10 radio control, can you help me how to setup my frist time

@outboxfpv4360 4 жыл бұрын

Nice review man. Can u do a tutorial how to setup to work on a simulator?

@RCVideoReviews 4 жыл бұрын

Do you mean simulator?

@outboxfpv4360 4 жыл бұрын

Yes liftoff or freerider

@RCVideoReviews 4 жыл бұрын

I will look into it. Have you tried yet? It works just by plugging it in and selecting Joystick mode.

@mavrickfaldo8866 3 жыл бұрын

Thanks br im just starting out in the fpv world, I have goggles vampire hd2 and this tx16s, do I need a crossfire or frsky receiver befor I can fky, or is that just for distance 🙄sorry again but learning from scratch, cheers

@RCVideoReviews 3 жыл бұрын

Crossfire enables longer distances--yes. FrSky works fine for proximity and park flying. If you're just starting, FrSky should serve you well as you learn FPV in steps. Just take a step at a time.

@anthonyzanze5946 2 жыл бұрын

The touch screen? Hmmm ive had to use mine on the nirvana and what a pain in the arse! Thank god we will have the choice off touch and buttons with radio master, the nirvana really needed that.

@RCVideoReviews 2 жыл бұрын

The Edge team is aware of the NV14 issues and they're working on making it better, but I did agree. I tried touch on the NV14 and it was a challenge.

@kkrekula 2 жыл бұрын

Thanks for your great content! I am revisiting RC after many years as technology seems to have reached another level! One thing I wonder about is: Why to people tear out their batteries from the plane and check the voltage from their smart planes when this info is already available in the telemetry?

@RCVideoReviews 2 жыл бұрын

Not all planes have flight pack telemetry--most don't. Don't confuse flight pack voltage with voltage fed to the Rx which is usually available via A2 or A1. That is a reduced value--usually 5v from the BEC, but it is not an indicator of flight pack voltage.

@kkrekula 2 жыл бұрын

@@RCVideoReviews Aha, well I just managed to get the smart telemetry from my Horizon Timber plane (by using DSMX instead of the DSM protocol) into my EdgeTX radio and see the individual cell voltages are there.

@RCVideoReviews 2 жыл бұрын

Perfect. You can do a lot when you know flight pack voltage. You should check this out: kzfaq.info/get/bejne/h5ujat1zlbSoc4U.html I uses this whenever my setup gives me flight pack voltage.

@rostanpil Жыл бұрын

Muito bom.

@RCVideoReviews Жыл бұрын

Obrigado.

@anthonyeden931 3 жыл бұрын

Strange that GregE and TxFlyer both reported, in their posts below, the same issue as I experienced with SB when carrying out the Switch Test . A reboot cured the problem.

@claudeladow2334 2 жыл бұрын

How about set up on a 3 channel fixed wing. To ensure we get rudder on right stick in mode 2 using wizard.

@RCVideoReviews 2 жыл бұрын

Simply assign the aileron input to the rudder servo channel in the mixer. Done.

@user-xu4sh8sw1y 4 ай бұрын

Hi just got my tx16s 4in1 having some trouble binding my spektrum recievers any tips on this Thank you for your time BW

@RCVideoReviews 4 ай бұрын

Try putting the DSM protocol on AUTO.

@tesimpamonami9188 4 жыл бұрын

Hi RC Video Love your Videos, I am new to the Channel, I just got to the racing hobby, I got a Radiomaster TX16S 2.4G 16CH Multi-Protocol RF System OpenTX Potentiometer and an EMAX Tinyhaw 2 Freestyle 2.5Inch FPV Drone , I would like to know if I have to configure the TX16 to be able to connect to the drone? Do you have a video that cover something like that? Thanks

@RCVideoReviews 4 жыл бұрын

I'm sorry, I have no experience with that drone so I have no information to offer. Welcome to the channel though...

@tesimpamonami9188 4 жыл бұрын

@@RCVideoReviews Before Binding to a Drone will I need to configure the TX16S? Thanks

@RCVideoReviews 4 жыл бұрын

I would suggest minimally having the 4 main channels setup: Pitch, Roll, Yaw, Throttle.