DIY BARN DOOR
Рет қаралды 287,242
3 жыл бұрынThis DIY barn door video tutorial is all about how to build a barn door out of MDF trim and plywood from start to finish. This chevron pattern sliding barn door will add instant style to any room. Bring Your Own Tools (#BYOTools 108).
BYOT News Letter byotools.me
BYOTee Shirts Available NOW! www.teespring.com/byotools
Instagram /
Facebook / byotools
TikTok / byotools
Studio, Video & Audio Equipment Setup:
-Sony A6500 Camera: amzn.to/31ppFbg
-Sony 35mm Prime Lens: amzn.to/39ZaCJa
-DJI Mini Drone: amzn.to/3a5WTAq
-iPhone 11 Pro (Time Lapse Shots): amzn.to/2DBAG0O
-Rode NT-USB Mic: amzn.to/3a4FGHs
-Rode Video Mic Pro: amzn.to/2Pt5eVh
-MacBook Pro (w/ Final Cut Pro X): amzn.to/2DNs4nJ
Material List:
-3/4" Plywood: homedepot.sjv.io/voqP3
-MDF Trim: homedepot.sjv.io/Nn39q
-Titebond II: amzn.to/39to8pG
-1" Finish Nails: amzn.to/3pvBZ4B
-Bondo: amzn.to/3pJb85f
-Primer: bit.ly/3oNhgbY
-Finish Paint: bit.ly/2LYESf6
-Barn Door Hardware: homedepot.sjv.io/mDVO7
Tool List:
-Compressor with Nailer amzn.to/2KD59PQ
-Chop Saw amzn.to/3qKMiSp
-Wagner Paint Sprayer amzn.to/3nOsonD
-Shop Vac goo.gl/Ir51yG
-Tape Measure amzn.to/2Q6axKS
-Bosch Disk Sander amzn.to/3al7GVV
-Sanding Pads goo.gl/fjmH0l
-Puddy Knife amzn.to/2KWw1dL
-Painters Tape amzn.to/3oe3XAe
-Painters Plastic amzn.to/3c5pcSq
-Clamps amzn.to/3pygcZQ
MUSIC:
Min0:00 - Venice Beach: Topher Mohr & Alex Elena
Min16:27 - Pata Pata: Miriam Makeba (Matt Cherne Remix) www.chernebeats.com
#byot #barndoor #diy #howto
@rosgamer_original 3 жыл бұрын
I watch plenty of DIY ppl on KZfaq and IMO your part of the top 5% that present a video that's worth watching from beginning to end. Grats sir, you've earned another subscriber.
@BYOTools 3 жыл бұрын
Wow Ros! I’m honored and thanks so much for the kind words. I truly take pride in the videos that I create and I’m so happy to hear the shows. Thanks so much for the support and welcome to the BYOT Fam!
@homedecore1391 3 жыл бұрын
In Modern Living Rooms Everyone Using "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/
@nixonuriel816 2 жыл бұрын
i dont mean to be so off topic but does anybody know of a tool to log back into an Instagram account..? I was dumb forgot my account password. I would love any tips you can give me!
@abdullahboston6963 2 жыл бұрын
@Nixon Uriel Instablaster ;)
@murielbuhr8451 2 жыл бұрын
Nailed it!
@biancamayzel 3 жыл бұрын
Jeez Brent i swear you can read my mind because you’re doing every project i have planned. Great work as always!!
@BYOTools 3 жыл бұрын
Haha!!! I Love hearing that. Thanks so much for watching and let me know how your project goes.
@Jaguwarps 3 жыл бұрын
GORGEOUS! Spot on work, and the bondo was an unexpectedly wonderful idea. Never would have thought of that.
@murielbuhr8451 2 жыл бұрын
I LOVE this video ! Thankyou for the infectious enthusiasm, attention to detailed explanations and pure craftsmanship.
@adammabe5819 3 жыл бұрын
Brent, I've been a viewer even longer than I've been a subscriber, and I just wanted to take a moment to say THANK YOU for all the time, energy, and effort you put into the things you present. Watching you has helped me gain some confidence in my endeavors when it comes to various DIY projects and woodwork. Your perspective is refreshing, the voice you use to share it is honest, and the content you produce is all around entertaining, not to mention educational and inspirational. I've been meaning to comment for a few videos now, but the bungee-suspended painting tip pushed me to do so NOW. lol We do all chase that perfect finish, but I think you might have just helped a lot of folks get closer to exactly that. :) A similar door is on my to-do list, bondo is on my shopping list, and I'm all about the "beautiful, sexy beast! oh yea!" (I'm a fan, can you tell?) Hope all is well in your world with the fam, the little one, etc. Looks like things are really going well for you, and I know for sure that's indicative of a lot of focused work... for which you deserve every possible reward. Thanks again! (PS - love it when you and Leah team up, too!)
@BYOTools 3 жыл бұрын
Just WOW Adam. This made my day! Thank you so much for sharing and your kind words. It might have taken a little while for me to find my true passion in life but luckily for ALL (haha) I did. Helping others learn how to build and create makes my life fulfilling and something I am truly lucky to be a able to do. Glad the bungee tip did it for ya. Funny thing is that I was debating on whether or not to even put that short clip in the video but that’s why it’s so important to show the details. That how we all learn together. Thanks again for your amazing support and Leah and I have big things planned for the future, I assure you :)
@tracymcrae5994 2 жыл бұрын
Omg! Where have you been all of my life! Your voice is very calming. Your instruction is clear & concise. And your projects are ones I have wanted to do & with your online presence & You Tube channel, feel confident to tackle. The workmanship you apply to all of your projects is outstanding .... 🙌🙌 Great job and thanks for all that you share, teach & inspire us with!
@GoodlyEarth 3 жыл бұрын
This is amazing. The door turned out perfect. The glue tutorial was what I really needed to learn. Thanks Brent!!!
@BYOTools 3 жыл бұрын
Love hearing that Mitch and thanks as always for your amazing support. It is truly appreciated
@jayrob7418 3 жыл бұрын
The bando on the edges jus saved my life. Thank you bro
@jrandolph509 Жыл бұрын
Outstanding! I finally found the design I like for my project. Thank you.
@curtmcguire5431 3 жыл бұрын
Your a TOP DIY producer!!! (and craftsman!!!) Beautiful door. Wow
@amarlakhani973 3 жыл бұрын
Honestly came out very well. Can’t wait to see what you come up with next!
@BYOTools 3 жыл бұрын
Truly appreciate the support Lamar. Thanks so much for watching and glad you like it.
@-DIYPRO- 3 жыл бұрын
Awesome, a barn door for my closet has been on my project list for some time. This gave me a lot of ideas!
@amarlakhani973 3 жыл бұрын
I agree completely
@Mattached 2 жыл бұрын
Great job my man. I was hoping it was going to be just one big MDF with the design routed out, but I was more impressed with yours.
@familyrenov8 3 жыл бұрын
Absolutely love the way it came out!
@BYOTools 3 жыл бұрын
Great to hear Renov8! Thanks so much for watching and your support. Keep up the great work on your channel as well.
@pattig717 2 жыл бұрын
Beautiful job and easy to follow . Keep up the good work .
@tomkat310 Жыл бұрын
Thanks for the design. I built one myself for under the porch. Came out great
@Kkuts37 3 жыл бұрын
Just beautiful, Brent!
@BYOTools 3 жыл бұрын
Great to hear Kathleen. Thanks so much for watching and your support.
@kostas_wellknown4519 2 жыл бұрын
Perfect job my friend! I really like that color !
@blyatberry7036 3 жыл бұрын
You make an amazing voice over The doors look like from a high end luxury shop!
@BYOTools 3 жыл бұрын
LOVE hearing that DDD. Thanks so much for watching and your support.
@didz2064 3 жыл бұрын
When I saw the thumbnail, I thought "great, another video using a CNC machine, so what's the point of watching...rant, rant, rant". Watched anyways and was pleasantly surprised to see plywood, MDF and bondo! It ended up looking so seamless and beautiful! Excellent work and great video, Brent!
@homechoicehk 3 жыл бұрын
Great job
@Kernidee1210 4 ай бұрын
This was an awesome video and very helpful!
@danielnogueira4585 3 жыл бұрын
I want all my doors in my house to look like this. So beautiful and modern. A+ 👌🏼👌🏼👌🏼
@BKRcustommotorbikes 3 жыл бұрын
dont know how you ended up on my feed but im glad you did love your content mate, definitely subscribing :)
@artiiione9996 3 жыл бұрын
Beautiful craftsmanship.....👍🏽 New subscriber from Australia 🇦🇺
@elplopplo 3 жыл бұрын
I think it looked great as well with the white inside the gaps
@GoodlyEarth 3 жыл бұрын
Ok, the Bondo was an excellent touch!!!
@BYOTools 3 жыл бұрын
Yesssssss!!! Great to hear that you liked that one :)
@pt18777 3 жыл бұрын
Love your channel bud. You do real nice work and with pretty basic tools. Most “DIY” will show someone building stuff in a full wood shop like seriously??
@daykeller2306 3 жыл бұрын
outstanding, great job!!!
@lennyadamowicz7642 3 жыл бұрын
That came out great! Nice job brother! Like to see what hardware you use for the handle! Anything would look good I’m sure! The bondo was a great idea also! Great job! 👌👌👌
@deepmalin1210 3 жыл бұрын
Hello Great work from France, Bravo!!
@PFWoodturning 3 жыл бұрын
Looks great!!!!
@powerofthepaw 5 ай бұрын
the white and black inlay would have looked good too. :) digging this design thanks man I appreciate the time and effort, keep the amazing vids going!
@parita17 3 жыл бұрын
Beautiful!
@charolettwills4358 2 жыл бұрын
Just beautiful. Good
@billymacmakes 3 жыл бұрын
Love that bondo edge! So smoooooth.
@BYOTools 3 жыл бұрын
It’s the little things you gotta love billy, right? Haha. Thanks so much for watching and your support bud.
@jacknimble1 2 жыл бұрын
Over time that plastic filler will likely crack. You could use a flexible filler made for plastic bumpers that would be a better choice.
@Frenchietalkofficial 2 ай бұрын
Great job man
@cesara7478 3 жыл бұрын
Awesome door man
@BigKeith510 3 жыл бұрын
Amazing door. I have been wanting to work with bondo but have been apprehensive. Might need to get over it and try it out
@BYOTools 3 жыл бұрын
Love hearing that Keith and you can do it! Very easy to work with just keep in mind that it dries quick haha.
@weanddiy4712 3 жыл бұрын
It's so nice!! I will make such a door in my new home 😀👍👍👍
@HomeIdeasYT 3 жыл бұрын
Awesome!
@paulomiguel33 3 жыл бұрын
I also love your nice door finish...modern
@BYOTools 3 жыл бұрын
Great to hear Paulo and thanks so much for watching.
@diegogigo7492 3 жыл бұрын
Muyyy buen video tutorial, EXCELENTE paso a paso 👌👍👏
@BYOTools 3 жыл бұрын
Muchas gracias por mirar
@wmsfx4169 3 жыл бұрын
You did a great job bro.
@BYOTools 3 жыл бұрын
Great to hear and thanks so much for watching. Appreciate the support.
@user-bc4xc5jl6b 2 жыл бұрын
This is super nice....I'm going to try it thx
@AnthonyBrown-xd2lw Жыл бұрын
Thanks for informative video. Also, you give me Mister Rodgers Vibes with the intro😂.
@gmarco3 2 жыл бұрын
@BYOT Awesome job! Looks beautiful. I hope to do this design, but our doorway is very wide at 60". There's only room on one side of the doorway, so no double doors. Any suggestions on what to use for the base of a 60" wide single door?
@shayladavis4785 3 жыл бұрын
Amazing 🤩
@alexandrelive100 3 жыл бұрын
this project is so top
@TheManFromMA 3 жыл бұрын
Nice, I’m doing one soon. Great video
@BYOTools 3 жыл бұрын
Love hearing this Juan and thanks so much for watching.
@thatguythatdoesstuff7448 3 жыл бұрын
You had me at Sawdust is Man Glitter.
@BYOTools 3 жыл бұрын
Love it haha!! Thanks so much for the support.
@sokalsophia4687 3 жыл бұрын
Wooooow..., love this door. I will do the same for my bedroom.....
@BYOTools 3 жыл бұрын
Love hearing that Sophia. Go for it and let me know how it turns out :)
@linnsoltwedel 3 жыл бұрын
, also called or , is the practice of engaging in visual perception by a magnifying or light-collecting optical instrument, such as a telescope or microscope. Vision corrected to normal acuity using corrective lenses is still considered "".
@BYOTools 3 жыл бұрын
It this the true definition of naked eye? LoL!!! Thanks Linn and hope you enjoyed the video.
@armandorangel2896 2 жыл бұрын
I Love your videos! I'm trying to build barn doors for my den with an 8x8 ft opening. How would you recommend I felt something like that. Thanks
@rtomsu 3 жыл бұрын
Is there anything to take into account if you were to finish both sides or add the chevron pattern to both sides? Wondering if adding thickness to the door by finishing both sides is going to cause it to rub against the wall or if there are spacers to be added so the door doesn’t rub against the wall when sliding it.
@1CraigE1 3 жыл бұрын
Hi @byot I noticed that the barn door hardware that you used has a 72" track but others come with 60". Is there any determining factor as to which to use if installing with the same size door that you made?
@smithjo4152 2 жыл бұрын
This is amazing. Question, did you also bondo the plywood side of the barndoor 🚪? I ask because it looks very smooth when you were painting it.
@eco_guardian 3 жыл бұрын
Brent, congrats on 100K subscribers. Its crazy, my partner and I are building a house in cottage country and we are doing most of the jobs you made videos for. I just poured a concrete counter and used the zform moulds you suggested. I'm about to do 2 massive barn doors - so you're timing is awesome. Great work - you are as handy as you are handsome. Those jeans Yo! Huge Fan.
@BYOTools 3 жыл бұрын
Truly appreciate your kind words and continued support Justin. My true passion in life is to help others learn how to build and create. So lucky and thankful for those that appreciate my content like you and luckily for you and your partner you can enjoy it in multiple ways haha. Thanks as always and send me pics of your finished projects on Instagram if you can would love to see them :)
@joselumanog1011 3 жыл бұрын
Nice work bro! how many mdf boards did you use for this project? thanks.
@peppermanelisha6136 2 жыл бұрын
Beautiful! Question? What was the blue stuff that you added to Bondo?
@robertspencer4004 2 жыл бұрын
Great video bro… I use a can of black spray paint for those gaps, much much easier then apply my top coat
@chrisleslie8701 3 жыл бұрын
Just curious how many mdf 1x4's you used for the door? And did you say what height your door is? 84 or 96"? Looking to follow your steps but curious how many LF or pieces of 8ft mdf boards I need. Thanks
@lechatbotte. 3 жыл бұрын
I’ve got hardware for this type of door for my closet but I’ve been hesitant to attempt it. If. Succeed I can by more hardware and do the other closet
@don9133 3 жыл бұрын
Naked eye: can be seen without the aid of a lens. Usually refers to distance. It also used when machiavellian subterfuge is done in the open.
@the1socialmediadivafloyd470 3 жыл бұрын
Omg I love that door what would u recommend for a person who has no saw…keep running to Home Depot? How many pieces did u buy? Cost ?
@tompolasky7302 10 ай бұрын
Congratulations....you have successfully completed a very nice door. Please treat yourself to a new track saw
@johnnyutah1053 3 жыл бұрын
Not sure the origin on naked eye, but a band called luscious Jackson has a cool song called naked eye lol. Door looks great!
@BYOTools 3 жыл бұрын
Haha thanks for the heads up Johnny. I need to check out that song for sure now. Thanks so much for your continued support.
@the1socialmediadivafloyd470 3 жыл бұрын
So my opening is 48 inches but not much room to move right or left do you suggest two 27” doors with two tracks? One in front of the other?
@jsol2480 3 жыл бұрын
Nice
@danhuml8546 3 жыл бұрын
Like the design and BTW Naked eye, also called bare eye or unaided eye, is the practice of engaging in visual perception unaided by a magnifying or light-collecting optical instrument, such as a telescope or microscope. Vision corrected to normal acuity using corrective lenses is still considered "naked".
@williamrpawul Жыл бұрын
@byot what kind of jig/guide was used on the router for the bottom groove? I'm having a hard time finding something that would guide a router on the edge.
@rogerk1710 3 жыл бұрын
Hey Brent. Me again. Great project. You could sell these doors retail at $500-$600 easy! Did you use ACK plywood for the backer? Another high end job! Thanks
@dlite1972 3 жыл бұрын
Turned out really nice. I’m considering this exact pattern on my own barn door install. What about a handle ??
@BYOTools 3 жыл бұрын
Love hearing that and I knew someone was going to ask me about the handle haha! The client wanted a specific handle and it came late so I couldn’t fit it in the video. If you want to see it with the handle let me know and I can add it to Instagram. Thanks so much for watching.
@gerrylara4783 3 жыл бұрын
@@BYOTools that would work,
@jaceecom 2 жыл бұрын
Would it be ok to accent both sides of the door with the chevron look? Does the hardware have a weight capacity?
@ATOVMUSIC Жыл бұрын
Hello buddy...nice video. Got a question. What color paint is that? Where did you get the hardware kit? Really enjoyed this.
@Wirez05 7 ай бұрын
Any recommendations for a base on an opening that is larger than 48" or an entire sheet of plywood?
@xto7744 3 жыл бұрын
que belleza
@AaronChilders 3 жыл бұрын
What do you do if your door is bigger than the size of the plywood sheets available?
@CornelioAustin 3 жыл бұрын
Super
@SmugMender 2 жыл бұрын
I noticed you added a blue supplement to the Bondo before applying. Can you let us know what that is?
@paulshaw9355 2 жыл бұрын
How do you make a Chevron m d f door with chevron on bothe sides and a frame on bothe sides and keep to 1.5 in thickness thank you
@kzanbusiness 3 жыл бұрын
Awesome! at 3:34 --- wouldn't it be "everything that succeeds it" ?
@benzellfloyd9471 2 ай бұрын
Beautiful doors. How much does one door weigh?
@pamelalinn9377 2 жыл бұрын
@byot Can you link what router you used please?
@parthisahomo 2 жыл бұрын
what speed was the paint sprayer on ?
@nicoledillon5155 2 жыл бұрын
I looked through previous comments and couldn't find the answer. How much MDF trim did you use?
@ThomWalbranA1 2 жыл бұрын
I was think that I would have painted the door before you added the boards and done different bright colors at each or multiple areas under the boards, then after the spray on it would look the same all black from a distance but small tiny bright flashes or hints of colors would catch your eye, or naked eye! lol If you ever try this please tag me, thanks. PS I love barn doors.
@prajaktashivarkar7019 Жыл бұрын
Has door become very heavy? And no any problem in installation right
@WestSideConnection5 3 жыл бұрын
You could also glue 2 sheets of plywood together and then use a routerbit to make the grooves.
@BYOTools 3 жыл бұрын
Great idea WS and I did think of that. Just didn’t think the routing would come out well in the end haha. Thanks for watching.
@WestSideConnection5 3 жыл бұрын
@@BYOTools in the end the routing process would probably take longer as you will need to guide it everytime.
@rayespinoza429 3 жыл бұрын
BYOT do you mind sharing what type of plywood you used for the base? Also, what does the backside look like is it just flat? Thanks
@BYOTools 3 жыл бұрын
There is a link in my video description on where to find all of the tools and materials in this video. Here it is though just incase: homedepot.sjv.io/voqP3. Thanks so much for watching.
@BYOTools 3 жыл бұрын
And yes the back is just flat and smooth.
@takebakker8493 3 жыл бұрын
Great video! Friendly tip for the voice over is using an pop filter on the microphone if you arn't using one yet. ;) The pops are pretty heavy in this video.
@That0verthere 6 ай бұрын
How do you calculate how many 1x4’s to purchase for a project like this?
@julieparke1699 Жыл бұрын
How would you recommend making this door if the height needs to be 103 inches tall? Thanks in advance
@AjKagz 3 жыл бұрын
Why can't we have an MDF or WPC with lines CNC cut and painted? Wouldn't we achieve the same results?
@jesusislord2149 2 жыл бұрын
How much did you end up spending in total to make this?
@prettyfacety7 3 жыл бұрын
Do you stay in Michigan?
@vasilykalugin6129 3 жыл бұрын
At 13:57 you can see there's 2 round plastic pieces. These are ment to get attached on top of the door abs are suppose to be between the door and track. They get lightly screwed on at the front edge so that you can twist them. The hole isn't centered so that you can twist them to the outside of the door or directly on top of the door. When you hang the door your supposed to twist them, this is ment to prevent the door from ever getting bumped of the track. Just saying this for anyone that plans on installing their own barn door. You don't want it to ever come off accidently. It wasn't done in this video
@KINGLIFERISM 3 жыл бұрын
I would like to purchase this. Not capable for me to do this in my condo.
@BYOTools 3 жыл бұрын
It would be a little tight in a condo haha. when I open up a barn door shop I will let you know :) thanks so much for watching and your support.
@trydiy8194 3 жыл бұрын
On the channel, I want to share how I create various things from wood,metal, construction experience and many other things made with my own hands. I have no special education, no production experience,there is only a desire and desire to improve skills. I hope my videos will motivate the viewer.
@izzytomkinson6429 3 жыл бұрын
In a few of your videos, you say something like naked eye and send me down a google search hole. I actually looked it up The first recorded mention of the naked eye was said to be 1664
@BYOTools 3 жыл бұрын
Yessssss!!!! Love it Izzy. Thanks so much for sharing. Now I need to do my homework. thanks for all the support and hope you enjoyed the video :)
Andrew Thron Improvements
Рет қаралды 17 М.
Insider Carpentry - Spencer Lewis
Рет қаралды 748 М.
Lady Milana&PAP
Рет қаралды 1,2 МЛН