These videos are extremely helpful. Thanks for taking the time to do them.

Really enjoying these tutorials. Thanks!

I learn something new every time. Thank you Lars.

Just again, I need to say that what you do is amazing. I just finished with your video and simultaneously did everything in Fusion as well. I love Your classes! Ty again!!!

Lars, here another fellow european in the States I want to thank you for teaching me Fusion 360 been watching your vids for 2 months maybe and learned alot, again thank you!!!!!

You are an awesome teacher Lars, I really enjoy these videos. I have been watching off and on for a while, getting more serious about upping my skills!

More good stuff. I learn every time I watch. Thanks so much!

Lars, Thank You! Again for an Awesome training session!!

Awesome work! Really enjoyed following along, Always learning something with your tutorials. Keep up the good work!

Your videos are pure gold!

Excellent video for beginners ! Thanks a lot, keep up !

This is very use full. Thanks for your time.

Thanks Lars! 29:57 - you don't actually have to reselect all of the edges. Just back off the arrow to 0mm again. Now you can just click and add the edge you need.

Thanks so much, great stuff. Very helpful as I transition from other CAD.

very good video. This is the best for beginners

Great video - really enjoyed it!

Really great, enjoyed.

Very useful, wish I got into this a lot earlier thank you Lars

Thanks for another great video. Learning a ton

Labatt Blue eh!.. Respect from the great white north.! great videos. Thank yall!

Thanks a lot again, Lars! In here, I can learn a lot of skill.

Very important! To start rendering, it's either a teapot or kettle icon, not watering can. As in "this will be a while, go and pop the kettle on". Don't mess with the tea. If you were an Englishman, that would be a hanging offence under 1672 statute "for treasonous offences against Her Majesty's most sacred beverage, Subdivision vii - Using tea to water one's garden". Really enjoying these videos and learning a lot, thanks!

super like Lars very helpful videos

Great job!!

thank you so much

Very cool

Hi ,I have done a couple of beginner models with warwick university.What was very nice is that you can watch the video and get a written tutorial.I find that combination very useful.Can you or have you got the same option ?

I really like this tutorial....

thank u!!

21:35 mindblown vs. 19:23 P for project and starting sketch from bottom of key cylinder... thanks for insight

Always love your tutorials Lars and really appreciate all your efforts. I can never catch the livestream or rarely check the recent Facebook videos but instead rely on KZfaq to notify me of something new. l have a suggestion that might help people like me and newcomers on KZfaq looking at your tutorials. The Facebook videos seem to end up in KZfaq with the generic title "Last night's Fusion 360 Absolute Beginners". Would it be possible to title the Facebook videos posted back onto KZfaq with something that gives an idea of the content? I think it would help you with new people who discover you on KZfaq looking for specific information in the title. You have an amazing body of content and the titles, in my opinion, are your best cataloguing and discovery tools for subscribers and new users. Cheers, Michael.

Hi Lars , Thanks for the video ... at 21.52 when you try to put the rectangle in the center of cylinder . it get constrained or fixed to the center automatically. but in my case i can create the rectangle on the center line but cannot constrain at the end of the road. i can move my rectangle. how to constrain it down to the center of the road

Sorry boss,, a small question... Why you started the Ring drawing without creating a sketch. in last part you mentioned we need to start items on a sketch, isnt it?

hi, can can you extrude less than 5 mm at the time with the arrow and not type in?

If anyone have some idea how to make it. I am looking for somekind of clip, 2 moving parts which after you push some pull it will stay in place together firmly. I am looking for that to fix heatbed on 4 side, so it will be less vibrating and more stiff. Any idea?

Hello Lars! Your videos are just great. Could you give a brief explanation of how to participate in your live streams? I have hunted around but haven't had any luck. Thanks in advance!

Hey Lars, thanks for doing these. I have an issue i struggling with. At 15.30ish when you're doing the fillets, the arrows to pull the fillet out are in the opposite direction. How do i reverse it? Thanks.

Lars - right at the beginning - how are you switching from the orbit tool to "normal" mode. I find that I have to click on the orbit icon with my mouse and then hit escape to get out of it. (I am on a mac)

Your contact set stopped working at 40:18 because the second ring actually got nudged behind the key. That's pretty cool, but a little confusing.

Hey Lars! Can you please give a quick lesson sometime on best practice to measure up real life 3D objects without a schematic to then model in Fusion with/for? I know its not a Fusion 360 lesson directly but it would be helpful. Have a good one!

When doing a video, would it be possible for you to have a drop down menu showing all the dimensions of the project, so that we can concentrate more or try other options on how something is done, rather than having to rewind each time to find out what a dimension was, if we got behind at that time.

Im having an issue w/ F360. For some reason my display shows "Design" where yours says "Model". All the tools across the tool bar are different. The drop down doesn't show the "Model" mode or selection. Do I have the right version? or is there a control I'm not picking up on to select "Model"

Hi Lars, I really enjoyed this tutorial, but I have a problem, at 32:57 when you drag the plane, the stuff under it moves too, but in my model the bar gets longer but the stuff under it doesn't move, I was wondering if you could help me out. Thank you, Amir

Thanks Lars! Do you have these files available to viewers? They could be helpful to us so we could go back through the history and see exactly how you made them - from within Fusion 360.

I'm a bit more advanced now in FUSION but I've always thought that the most confusing thing in FUSION is the ORIGIN shown on the screen vs. the "cube" and their relationship to one another. The plane shown on the ORIGIN, at the bottom, is actually the TOP when referring to the Cube AND none of this has any relationship to the X, Y, Z axis' used to cut the actual part in CAM. Any comment?

Hi Lars, I just found ur KZfaq channel 3 days ago. I watched some of ur videos then I started to watch ur videos for the beginners. But unfortunately I tried to practice what I saw in ur first video but I couldn’t do what u did 😪😪😪. I am really interested in learning how to use fusion 360. I tried to follow u in ur Facebook account but it seems I can’t, I don’t know y 🤔🤔🤔