Nice I’ll add that in the description

Did you do this on your SVO? I have an 86 SVO and want to do this too, but I think I need to swap the brake master cylinder

@@bullet2096 no not yet, I decided to drive mine with the stock SVO brakes. I still may still do this swap though. At the moment I’m in the process of repairing it, from a crash. I had an accident a few weeks ago, but it wasn’t due to the brakes. I made a rookie mistake and tore up my door and fender. I have a video of my car on my KZfaq channel.

Thanks

I’m loving them, what a difference over stock braking. You can get custom stickers from @sinisbuilt on instagram.

They are still out there just have to look.

@@TheDavidDailey the front wheels are 18x8.5 +30 I have a 10mil spacer

I do run a 1/4” spacer on the front. Thanks for watching.

I’ll Brakefield is awesome and yes I did rear disc brakes on the back, on the rear, I put 03 cobra rear disc brakes

They needed a 3/16” spacer

For the brakes?

@@HicksHouseVideos yes sir!

I bought used cobra spindles that came with rotors, $300, the new calipers and pin kit I bought on Amazon $270. The S&S conversion kit is around $200 and I also bought new brake lines from stifflers $119 and then new pads from advance $100. It was right under $1000.

@@HicksHouseVideos not bad at all!

It’s not bad at all, look up a brembo or one of the others for a fox specific kit they are well over $2000

I will eat you know soon I didn’t get it finished before PITS and then found a crack in the factory hard line. Should be finished up this week and out for a test drive.

They are ATS and here is a link to the driver side: www.amazon.com/ACDelco-172-2777-Original-Equipment-Assembly/dp/B01K8BW1YS/ref=asc_df_B01K8BW1YS/?tag=hyprod-20&linkCode=df0&hvadid=312455765168&hvpos=&hvnetw=g&hvrand=15993288330590612576&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=1021322&hvtargid=pla-451299390855&psc=1

Thank you!

I’m not sure I would have to measure it.

@@HicksHouseVideos thanks. Just trying to figure out wheel options. The depth or thickness would help. I already have the PBR option and these look much thicker. Need to know what size offset wheel depending on thickness of this caliper

My wheels are +30 with a 3/16” spacer

@@HicksHouseVideos great my wheels are 24 offset. They should work without the spacer. Right now I have 1” gap between PBR calipers and the closest wheel spoke. Also how does the braking feel?

Braking is really good.

I don’t know what happened to it, I don’t delete comments.

@@HicksHouseVideos I think he's either my raggedy azz iPhone10 or KZfaq doesn't like me lol yours isn't the only page either 😂😂😂

Weird