How to REMOVE Dents from a Motorcycle Tank!!!

Рет қаралды 16,721

3 ай бұрын

Fixing dents in a motorcycle tank.
Stud Welder ➨ s.vevor.com/bfQDV3
(Use Code SAVEMORE5 for 5% off)
ALL MY MACHINERY ➨ www.machineryhouse.com.au/
QUAD LOCK 10% DISCOUNT ➨ bit.ly/3Mebjjj
SHOP - www.caferacergarageshop.com/
Parts and tools I use:
www.amazon.com/shop/caferacer...
Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for KZfaqrs
💥💥Want to see exclusive content, behind the scenes footage, and get updates on what’s happening on the channel before it happens?
VIP giveaways, merchandise discounts, and much more!
/ caferacergarage
=====================================================
For all commercial inquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe To Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challenge) SUBSCRIBE to follow my future builds, I'm based in Australia.
=====================================================

Пікірлер: 47

@minerma 3 ай бұрын

Good call on box opening, everyone has opened a box before and knows how its done

@danielbuckner2167 3 ай бұрын

I just inflate them to put pressure the dent from the inside and tap with a body hammer to exite the metal around the edges working my way in.

@zesse1987 3 ай бұрын

Yeap. This was just horrible to see😆

@eg39701 Ай бұрын

I've had people tell me it potentially could blow out the pinch seams on some old tanks. What PSI do you recommend?

@danielbuckner2167 Ай бұрын

@@eg39701 I actually cant say how much but I CAN say that I use small pulses of pressure rather than trying to blow it up so to speak. Just like when pulling a dent, dont go for it all at once but rather little efforts to work the metal back where you want. 👍🏻 You just want to see the tank sides move a tad so you know there is pressure on the back and then use your body hammer around the dent to excite the metal to incentivize it to move back to it original position.

@roum22 3 ай бұрын

Seen videos on youtube of it being done with a modified bike inner tube. Seemed to work great, and of course is also cheap..

@OvervoltedMinds 3 ай бұрын

The thing with Vevor, at least from my experience, is from all the Chinese tool brands, this wouldn’t disappoint on build quality and functionality wise also not too bad. For professional use I wouldn’t be able to say anything as I’m not one, but for crafting and DIY, I cannot complain. And they don’t break the bank either.

@CafeRacerGarage 2 ай бұрын

Thanks mate

@CustomGarageAlsace 3 ай бұрын

Thank You for Video 👍

@dmotos1457 3 ай бұрын

Parabéns pela apresentação do processo de reforma e apresentação técnica Abraços Daniel Dmotos aqui do Brasil.

@peterk2455 3 ай бұрын

Repaired lots of bike and boat tanks. Often faster just to cut the bottom out, can get inside with an English wheel. Other item I use is an Inflatable Door Airbag/Wedge.

@MayorofDipshittery-lq7if 3 ай бұрын

You ever watch those guys from India taking dents out of tanks while sitting at the side of the road, wearing flip flops and using a shaped piece of bar ???????

@aussiefarmer8741 3 ай бұрын

I would have tried some compressed air first. It wouldn't get the little ones out but larger side ones would pop . When I restored a Z900 A4 kawasaki the tank had 2 golf ball sized dents on the sides where the wrong handle bars were fitted and they hit the tank. A old local fella popped them out with his special tools he uses through the filler hole. He did a perfect job, not an oz of filler.

@Vegplot 3 ай бұрын

You can do this very simply, if the dent isn't creased, by making a plug for the fuel can and sealing off the fuel taps. In the plug fit a car tyre valve or similar so you can add air via a hand pump. The plug will need to be clamped so it doesn't pop off. Assuming the tank is thoroughly cleared of petrol, oil, etc so no explosive fumes are generated gently heat the dent to red heat with a gas torch (butane or propane) and build up air pressure (not to much or the tank may go out of shape or split a seam) to lift the dent. This doesn't work in all cases but most dents can be removed sufficiently well.

@CafeRacerGarage 2 ай бұрын

Great idea thanks for sharing mate

@kihestad 3 ай бұрын

A handy machine if you're do doing a lot of bodywork 👍 Can it be used as a spot welder?

@CafeRacerGarage 2 ай бұрын

Thanks mate, no its not really designed for spot welding I don't think

@orhankabak9462 3 ай бұрын

For all the people with cafe racer builds experience, what would be a good first build for a beginner? HELP PLEASE 🤠 Great video's btw💪 keep it up🤟

@CafeRacerGarage 2 ай бұрын

Hey mate, Id say something popular like a Japanese bike, Honda CB ir simulator are easy to work on just depending on the cc size you want

@kleidtomasse 3 ай бұрын

Seen someone do dentless paint repair on tanks and seems cheaper to do but needs more effort.. but I guess if you add bodyfillers paint and polish its the same effort but dentless repair seems better..

@rsbharley4766 3 ай бұрын

Nice review Dan, looks like it gets the job done. Dan with your tig welder, as the fan runs constantly is it noisy ? As I am looking at purchasing one . Ride safe and take care. Cheers

@CafeRacerGarage 2 ай бұрын

Yes it has a fan that runs non stop keeping the machine cool

@Henrik.Yngvesson 3 ай бұрын

I have no experience with this but I feel that aiming for the middle and with very light pulls work it out slowly and not go all over it like that. And the key is going slow so you don't get the sharp outward dents. Also the use of a gas torch might help to anneal the area to be pulled, like the edges of the dent where you have a lot of resistance. Another method is to cut open the inside of the tank to get a hand and tools inside. Evan Wilcox builds and also repairs polished aluminium tanks, he almost daily share his work in short videos and explain what he does and the thought process.

@Henrik.Yngvesson 3 ай бұрын

My comments have been filtered by youtube in the past when I try to refer to Evan and I guess it's certain keywords that does it. For anyone interested he's on "margatsni" if you read it backwards.

@CafeRacerGarage 2 ай бұрын

Thanks mate appreciate the feedback

@benscheeres 3 ай бұрын

Hi, I’m in Ipswich and from watching your channel I have started a CB750 cafe racer with a super moto fork conversion. How do I get a roadworthy? In Queensland?

@CafeRacerGarage 2 ай бұрын

Thanks mate. You will need to follow the laws on bike mods, you can find this on Qld Tran website

@johnnyblaze5448 3 ай бұрын

set it under pressure and use the gluepuller

@johnDukemaster 3 ай бұрын

A dentist are you? 🙂 On tanks from bikes with injection, there's a big hole at the bottom, for the pump. Stick something in to hold against when tapping with a hammer on the outside. I did that on a bike I had a few years ago. A brand new Honda CB650R I modified a bit. Really nice looking machine, but boring engine. 🙂

@CafeRacerGarage 2 ай бұрын

Thankyou mate :) Always learning we are

@petechounet4108 3 ай бұрын

Hi, good job. You should remember to never do this on a non-degassed tank.

@zeemanjr 3 ай бұрын

Yeah , Look up paintless dent repair . There are tons of videos on youtube.

@Derpderpson123 3 ай бұрын

I go to a PDR specialist, I'm handy but not that handy

@christophermikrowelle7093 3 ай бұрын

No website available? Shop closed?

@CafeRacerGarage 2 ай бұрын

Currently working on a new one

@jasonwirth9079 3 ай бұрын

I’ve done two tanks by filling them with water and freezing them.

@CafeRacerGarage 3 ай бұрын

That sounds very interesting. How do you go about getting the dents out once the water is frozen?

@tonyfree2691 3 ай бұрын

The water freezing expanding pushes it out. I can only imagine it deforms the whole tank.

@kevinlewis9151 2 ай бұрын

No Idea how many pounds are in a kilo I know how much cocaine is in a kilo though lmao

@pistikinzu 3 ай бұрын

Your website doesn't work

@CafeRacerGarage 2 ай бұрын

Currently working on a new one, stay tuned its going to be awesome

@rafidabbas3952 3 ай бұрын

🫡🙏

@alext8828 3 ай бұрын

This guy sounds New Zealand rather than Aussie.

@David-uj5gr 3 ай бұрын

Seriously ??!!!!

@alext8828 3 ай бұрын

@@David-uj5gr Am I wrong?

@CafeRacerGarage 3 ай бұрын

Haha nope I'm definitely an Aussie 😊

@alext8828 3 ай бұрын

@@CafeRacerGarage Great people, great country. I'm up in the US. Wall to wall shit heads.