★ MAKING a TILT TOP TIMBER Table With Some COOL FEATURES

★ MAKING a TILT TOP TIMBER Table With Some COOL FEATURES - Cafe Racer Builds

Рет қаралды 64,355

2 жыл бұрын

How to build a DIY tilt top wood Motorcycle table with some very cool features
HINGE DRILL BIT ➨ amzn.to/3t5Jhio
UNIVERSAL CENTER PUNCH ➨ amzn.to/3hnzteg
ebay:
HINGE DRILL BIT ➨ ebay.us/jQwxG6
UNIVERSAL CENTER PUNCH ➨ ebay.us/VTom9s
My BELT GRINDER ➨www.84engineering.com.au/shop
My BAND SAW ➨ www.machineryhouse.com.au/B010A
TABLE SAW ➨ www.machineryhouse.com.au/W486
SHOP - www.caferacergarageshop.com
Parts and tools I use: www.amazon.com/shop/caferacer...
#DIYTiltTopTable #CafeRacerGarage #CafeRacerBuilds
Music I use, TRY IT FOR FREE bit.ly/2OR9jRq - AMAZING for KZfaqrs
💥💥Want to see exclusive content, behind-the-scenes footage, and get updates on what’s happening on the channel before it happens?
VIP giveaways, merchandise discounts, and much more!
/ caferacergarage
=====================================================
For all commercial inquiries (Product Testing and Reviews): Please contact me at caferacergarage07@gmail.com
=====================================================
★ DON'T FORGET TO WATCH
=====================================================
01. ★ BUILDING A PVC PIPE EXHAUST TEMPLET!!!
• ★ BUILDING A PVC PIPE ...
02. ★ WHY I DON'T WANT TO BUILD A YAMAHA XV750 CAFE RACER!!!
• ★ WHY I DON'T WANT TO ...
03. ★ How To WHEEL RESTORATION - TIMELAPSE / Cafe Racer
• ★ How To WHEEL RESTORA...
04. ★ Making a HANDMADE Alloy TAILLIGHT For a MOTORCYCLE
• Making a HANDMADE Allo...
05. ★ HOW TO MAKE TOE PEGS TO MATCH THE TANK!!!
• HOW TO MAKE TOE PEGS T...
06. ★ How to Build A Cafe Racer, HONDA CB750 Timelapse || Cafe Racer Garage
• ★ How to Build A Cafe ...
=====================================================
★ Goal - 1 Million SUBSCRIBERS
=====================================================
★ LIKE | COMMENT | SHARE | SUBSCRIBE
=====================================================
★ Please Subscribe To Cafe Racer Garage Here:
/ caferacergarage
goo.gl/cjRKUC
=====================================================
★ CONNECT WITH ME ON SOCIAL MEDIA
=====================================================
★ Instagram: / cafe.racer.garage.07
=====================================================
★ Facebook: / caferacergarageau
=====================================================
★ ABOUT MY CHANNEL
=====================================================
Hi Folks,
This is Dan, let me show you step by step on how I build stuff each week including my CB750 Cafe Racer & the (Honda Scrambler/Tracker build on a budget challenge) SUBSCRIBE to follow my future builds, I'm based in Australia.
=====================================================

Пікірлер: 75

@Thewatson77 2 жыл бұрын

Clever little stand Dan 👍🏼 I like the addition of the drawers personally

@CafeRacerGarage 2 жыл бұрын

Thank you so much mate

@Lazerecho 6 ай бұрын

I'd like the front wheel chock on a ratcheting rail lock it at the bottom of the ramp and ratchet up.

@scottdog182 2 жыл бұрын

Love the addition of the draws, great work Dan

@CafeRacerGarage 2 жыл бұрын

Thank you so much mate, was a fun build :)

@DocJonesGarage 2 жыл бұрын

I'm in the planning stage for my bike table, this has given me some great ideas, thanks Dan!

@CafeRacerGarage 2 жыл бұрын

You’re welcome my friend 😀

@wilytohel 2 жыл бұрын

That looks sick Dan. Perfect for my CG. Would you happen to have any plans or a cad or something you could share?

@CafeRacerGarage 2 жыл бұрын

Unfortunately I didn’t do any drawings of it I just built as I went which is how I do most things

@pmacc3557 Жыл бұрын

Great job 💪🤙👍 I have to maneuver two bikes into a little garden tool shed 😂

@beamin03 2 жыл бұрын

Great timing! I was about to make a simple one and use my ramp but this one is so much cooler thanks so much!!

@CafeRacerGarage 2 жыл бұрын

Perfect, definitely recommend the tilt-top :)

@beamin03 2 жыл бұрын

@@CafeRacerGarage yes sir! That and I might add rubber or something to make it non slip I'm not planning on adding casters,the storage space is definitely a must!

@spacemonolith9722 2 жыл бұрын

Perfect timing mate. I've been building one like this on paper for a while. Your vid helps a lot!

@CafeRacerGarage 2 жыл бұрын

That is amazing. I hope it all works out, planing definitely is a good place to start

@garya3056 2 жыл бұрын

You have some mad skills, Dan! Hope all is well there. 🏍👍🏍

@JustTex 2 жыл бұрын

Pretty cool bench sir. Cheers 4 sharing.

@CafeRacerGarage 2 жыл бұрын

Thank you mate :)

@JMKGarage 2 жыл бұрын

Very cool, and looks relatively easy to build. If I had the room in my garage I would definitely be building one of these.

@CafeRacerGarage 2 жыл бұрын

You could make one that folds down flat, just be sure to build it strong.

@paulandrews5550 Жыл бұрын

Love this channel, I'm gonna be doing my 1st project next year on a 1982 motoguzzi v50 mk3, and will be using a few of your videos for reference and guidance 😀. Great channel and great projects. Thanks for sharing your skills

@kermitthefrog6363 2 жыл бұрын

Fantastic ... Thanks for that!!

@mattfranco8715 2 жыл бұрын

Looks great big fella. That top might be abit of a handful with wet tyres but hahah. The storage is awesome!

@CafeRacerGarage 2 жыл бұрын

Yes you are not wrong. It’s definitely not the perfect solution but it is a solution. 😮😆

@mattfranco8715 2 жыл бұрын

@@CafeRacerGarage my solutions rarely are perfect 😂. 🤙🏼🤙🏼

@samlegae9217 Жыл бұрын

perfect, I'm about to start a K100 build so this will be good to keep me on task while I get some more funds together

@johnDukemaster 2 жыл бұрын

Well done Dan! And some very handy tips. You're a good man!

@CafeRacerGarage 2 жыл бұрын

Thank you so much mate, I grew up around woodworking from a very young age so stuff like this is super fun for me. I find working with timber to be very therapeutic and I might end up doing a bit more of it on the channel.

@johnDukemaster 2 жыл бұрын

@@CafeRacerGarage Good idea 👍

@rsbharley4766 2 жыл бұрын

Excellent job Dan, looks great mate, and now I have to go and buy two more tools LOL. Ride safe. Cheers

@CafeRacerGarage 2 жыл бұрын

Thank you so much mate, he definitely won’t regret buying these tools ;)

@secondchancegarage 2 жыл бұрын

Nice moto rack. We're about to build a new work bench. If we didn't buy locking swivel casters, we would probably take you idea.

@CafeRacerGarage 2 жыл бұрын

If I was to build it again I would definitely use steel for all the moving parts just for long Jevity.

@ducatimonster1429 2 жыл бұрын

Nice idea.

@troysnider5629 Жыл бұрын

Fantastic!

@holzwurm5004 2 ай бұрын

Hi, great Video. Thank you for sharing this!! Can you please tell the Height of the Table ? How did you find the pivot point?

@paulcushnie 2 жыл бұрын

Nice build. I would be tempted to put 2 d clips on the side so you can use some ratchet straps to hold the bike as well when moving it.

@CafeRacerGarage 2 жыл бұрын

Thanks mate and yeah you do have a great point there, I do have a few modifications to do it but at the moment I’m using a rear wheel bike stand so that’s nice and secure as… Back wheel up

@editerra4635 2 жыл бұрын

Essa ficou braba meu parceiro

@MrAndrew1400 2 жыл бұрын

Nice work mate, initially when you said you were using pine I had my doubts, but it turned out great. Im really looking forward to the virago build as I am in the progress of my own '81 750 build.

@CafeRacerGarage 2 жыл бұрын

Thank you mate 😊

@Uncle_Chuck 2 жыл бұрын

Looks 👍

@athaphian 2 жыл бұрын

Very nice! Thanks for sharing. Just one question, you trust those 2 bolts to carry the weight of a motorcycle while hinging? After prolonged use, are you not afraid one will snap?

@CafeRacerGarage 2 жыл бұрын

Thank you so much mate, Those bolts are 13mm or 1/2 inch I would be more worried about the integrity of the timber then I would about the bolts.

@AnotherCafeRacerBuild 2 жыл бұрын

Nice!!

@MotoMango 2 жыл бұрын

AMAZING WORK! I need to get me one of these eventually xD

@CafeRacerGarage 2 жыл бұрын

The tilt top is the way to go, 500mm off the ground is good if you are tall, get an old office chair to go with it for the lower stuff :)

@MotoMango 2 жыл бұрын

@@CafeRacerGarage Yeah, I use a little stool for working down lower :)

@jamesruralsparkynz3504 2 жыл бұрын

Rad dude 🤙

@wood2259 5 ай бұрын

Thanks for the inspiration Dan. Can you tell me are you happy with the wheel chock, and if so, where did you get it? Thanks in advance.

@CafeRacerGarage 5 ай бұрын

No worries I got it from an automotive place called Supercheap

@wood2259 5 ай бұрын

I think I've heard of them 😂😂😂. Thanks mate.

@go5582 Жыл бұрын

Hi handsome. What a functional motorcycle lift. I love it.Would you consider selling it,or building one for sale? Thanks

@CafeRacerGarage Жыл бұрын

I gave this away late last year

@abones5985 2 жыл бұрын

Me saludas??

@StokedBuilds 11 ай бұрын

Awesome. I am just looking to design my own bike table and i really like the idea of this design. I might go a bit more simple as I don't need the wheels and it can stay in one place. How hard is the drop back down with the bike on it? I am a bit worried about the weight.

@CafeRacerGarage 11 ай бұрын

Yeah you have to get a bit of a run up to get the bike on, but apart from that, it works perfectly It’s actually a World War II design

@StokedBuilds 11 ай бұрын

@@CafeRacerGarage Awesome. One last question..I'd like to be able to get a bike in from either end as I have a long garage and bikes can come in either end of that. Is your pivot point right in the center so it could swing both ways? Or should it be offset from the center?

@techquirks707 2 жыл бұрын

Nice video, buddy. How’s Queensland, hope everything is getting better with these floods

@CafeRacerGarage 2 жыл бұрын

Thank you mate, yes I’m ok where I am but some people got hit hard

@3silver702 2 жыл бұрын

I like the sneak peak at 8:44. :) Edit: spelling

@CafeRacerGarage 2 жыл бұрын

Haha SHHHH 🤫

@ashleylongley623 2 жыл бұрын

Couldn't help but notice you are in Queensland, I have a XJ600 SECA II UGLY, I have had some work done and have plenty of parts (no engine work needed), I was going to do the work myself, but time is an issue, can you recommend someone to complete my project, might make a good series, ugly duckling to a beautiful swan

@dutzu16 Жыл бұрын

Do you have the blueprints?

@garyyorke1080 2 жыл бұрын

And why buy one when you can make a real sick looking fit for purpose one . As soon as you said about the screws I thought needs bolts .. great video as always Dan thanks

@CafeRacerGarage 2 жыл бұрын

Thank you Gary, yes it definitely needed bolts, if I was to build another one I would definitely make more steel parts especially the wheel mechanisms.

@kalebgoad5957 Жыл бұрын

Can I get the measurements of the wood used?

@CafeRacerGarage Жыл бұрын

I would love to but I gave it away on my Instagram you can see the guy I gave it to, he might be able to give you the measurements

@jawracing911 2 жыл бұрын

Nice… so I just ordered 2 sizes of those aligning punches 🤣🤣👍🏼. Totally your fault 😬

@CafeRacerGarage 2 жыл бұрын

That's awesome, you wont regret it :)

@OzEnduro09 2 жыл бұрын

Sweet now less carpentry more bike building daniel 😛

@CafeRacerGarage 2 жыл бұрын

Haha 😂

@SOLDbyYOU 11 ай бұрын

Good video but not great…. A lot of time on the build but …WAY..too little time on 1) getting the bike up and in place and releasing it from your hands….and…. 2) reversing the process / getting the bike back down…

@SOLDbyYOU 8 ай бұрын

And…. Not enough time spent showing the completed wheel mechanism.