Do it yourself? - WHY NOT :-P Hope you guys enjoy the video. Thanks for watching as always! / calem21 - Thanks for your support.
Пікірлер: 459
@danielsonsthagen8970 Жыл бұрын
It was a little flimsier than I expected. I had to add a 2x2 piece of wood to the bottom on the rear side in order to stabilize it better kzfaq.infoUgkxXTh-lz-8W6GcB219vTLp27-MxbZYObBX . It is also starting to bow a little at the outer wall ( I've had it up for about 6 months), I've already had a shelf tumble down because of the bow and the fact that the little shelf brackets are quite short. I went out to home depot and got some longer ones so that the shelves don't tumble down again. Overall, it looks very nice for the price and it holds a lot ( I use it as a pantry). I am very satisfied with my purchase. I just strongly suggest reinforcing it before putting it up.
@jacqueschaffeteaux71894 жыл бұрын
Bravo. You've got something the other ones don't : you've got taste. Discovering one of your works is always a pleasure. Thank you. Regards from France.
@chaineffect64374 жыл бұрын
CaLem man, you are one unbelievably talented young dude, the fit and function of that tool cabinet is superb. Hats off to you man, as always 👌🏼
@bdeconcept3834 жыл бұрын
This old toy would be proud
@ashy14234 жыл бұрын
It has been a pleasure to watch great craftsmanship at work. This tool chest will last a few lifetimes. Stay well and thank you for sharing. Ash from Scotland 🏴
@aceroadholder21854 жыл бұрын
Very nicely done! Now you know why a well made tooling cabinet is so expensive to purchase. It would be a good idea to put the castor wheels on with bolts to a pad welded onto the cabinet. Castors do break and the wheels get chewed up when rolled around the shop. Having them bolted on makes replacement much easier. Cheers from NC/USA
@PhilVandelay4 жыл бұрын
Great work, that's a lot of sheet metal to cut and bend! The intro was a really nice idea
@RRPWG4 жыл бұрын
In the future, a quick and decent looking drawer handle can be made from just cut angle iron or U channel tack welded to the front of the drawers pointing down. It'll make it so you have something to slip your fingers behind when those drawers get nice and heavy. Bravo on the box, it is not easy to get those drawers in square enough to operate cleanly without interference!
@massimobianchi42624 жыл бұрын
absolutely fantastic, it's nice to see young people working with passion
@ianpendlebury37044 жыл бұрын
Mechanical genius and comic genius combined - wonderful! (and thanks).
@rsemrad24 жыл бұрын
You never cease to amaze! Your timing is good too. I was just beginning to wonder about what you have been doing. Great project.
@barthanes14 жыл бұрын
Now I feel like a lazy bastard for buying my toolbox.
@TheTorkerman Жыл бұрын
Not only the awesome tool cabinet, but the intro and the editing too! Great stuff
@vincei42524 жыл бұрын
You can never have to many shelves and cabinets! Nice build!
@mr.fluffers92233 жыл бұрын
Snap-on, Festool all are nice, but making your own tools and cabinets is the ultimate flex
@BayouChilehead4 жыл бұрын
You always amaze me with your work! Now you make your own tool cabinet.....Awesome!!
@Sin_Dinero Жыл бұрын
The beginning of the video with the piano playing deserves a thumbs up on its alone, great video all together!
@mishgan19864 жыл бұрын
Круто ! Еще свой шильдик или краской логотип... Но можно и облегчить - задняя стенка могла бы быть из фанеры или негорючего материала если это важно...Верхнюю крышку надо было усилить изнутри деревом или фанерой чтоб использовать как мобильный мини-верстак! Я бы ее вообще подъемной сделал, а под ней самое востребованное!
@MakarovFox4 жыл бұрын
is cool to see how this old tony is an inspiration for many chanels
@physicsguybrian4 жыл бұрын
Solid as a tank and beautiful as well! Very nicely done Sir!!!
@stollifa4 жыл бұрын
Pretty good job - again. Every workshop does need something like that and of course with full extension drawers . Every thing need to have it´s own place, makes working much more efficient. Everytime nice and pretty satisfying to watch your work. Thank you & stay well.
@rayp.4544 жыл бұрын
Who would dislike this?? Your ambition is off the chart. Well done!
@oliver4524 Жыл бұрын
Sweet, I have that same box roller, I find it works better the more rust is on it.
@KravchenkoAudioPerth4 жыл бұрын
Nice job! I like your spacer tricks. Many years ago working with my father he told me the most accurate way to make many parts is not to measure. Then he introduced me to making from a known part. As long as you use a master part and only mark from it you will have consistent dimensions from it.
@willi-fg2dh4 жыл бұрын
that sheet metal roller/brake would work even better if you cleaned off the rust. ★★★★★ - project ★★★★★ - execution ★★★★★ - workmanship ★★★★★ - music ★★★★★ - humor
@aly-tek71904 жыл бұрын
Yeah the corners would have came out welded too :P
@DuncanAitken4 жыл бұрын
@@aly-tek7190 And painted!
@alpinewhite4 жыл бұрын
And sandblasted
@kareem85334 жыл бұрын
@@alpinewhite And full of tools
@sdunca48644 жыл бұрын
Sweet build- add a tapped screw insert to the rear corner post for a light! AWESOME- as always- BRAVO!
@dr.feelgood2358 Жыл бұрын
nice job! very professional looking cabinet!
@WilliamTMusil4 жыл бұрын
Wow! You made your own Lista cabinet. Awesome.
@m3chanist4 жыл бұрын
Simply beautiful craftmanship and aesthetic, I've just come in from my workshop for my afternoon cup of coffee where I've been having a staring contest with a set of drawer runners very similar to yours, hard to say who was winning. Thinking about exactly how I'll do it..that takes a while, so I plonk down with my cup of joe and flip on youtube for a brief browse, and look, your video is sitting in my feed waiting to be watched. Life is quite good on occasion.
@Samisven4 жыл бұрын
This Young Tony™
@McConnorsChannel4 жыл бұрын
someone has been watching this old tony
@artificialw0lf9594 жыл бұрын
hey sorry to bother you but i recently started watching this old tony and wonderd which video did i miss to dont get this reference
@i.bcraftsman59774 жыл бұрын
@Artifi all of 'em haha
@McConnorsChannel4 жыл бұрын
This ^. It's just a bit like this old tony's style, nothing wrong just could spot it a mile off :)
@i.bcraftsman59774 жыл бұрын
Me too TOT is unbeatable haha
@MR619Can4 жыл бұрын
@@artificialw0lf959 if you watch TOT's video's you will see him do comical stuff like cut a piece of steel in half with a karate chop....comical stuff and his editing is awesome. That said, Ca Lem's videos are awesome also.
@GillianKnives4 жыл бұрын
Was considering building myself a new cabinet and was doing a YT search when I found this video. Nice work, both on the cabinet and the video. I like how the cabinet rolls itself into position at the end.
@zoidberg5524 жыл бұрын
Thats huge amount of work you did. Well done !
@biggz_performance_fabricat12614 жыл бұрын
Absolutely brilliant work, just amazing, I never thought of building a tool box/ organiser until now, thanks for the inspiration...........keep it up man
@viking20454 жыл бұрын
You, SIr, are a master craftsman! Very inspiring and fun to watch! Wishing you great success!
@NathanNostaw4 жыл бұрын
Wow, what a solid drawer set. That's going to last a lifetime.
@stollifa4 жыл бұрын
more then a lifetime.
@Bob_Adkins2 жыл бұрын
Great job. built like a tank!
@meduffer4 жыл бұрын
The roller gag had me laughing. Great build!
@sbradley91894 жыл бұрын
I've never seen a slip roll build boxes would love to see a video of that 😁
@1990notch4 жыл бұрын
Haha, yes, I would love to get my hands on a magical slip roll like that.
@stevevender11544 жыл бұрын
Great video! Excellent project and very entertaining.
@JDLarge4 жыл бұрын
Wow, now THATS built tough! Very nice job once again my friend. I don’t believe there’s anything you can’t build and build it right! That’ll outlive us all for sure! It’s always a pleasure to watch you create masterpieces! Thanks for taking us along✌🏼
@thechumpsbeendumped.77974 жыл бұрын
Excellent production, both in cabinet and filming. Keep it up. 👏🏼
@rafaelreina63642 жыл бұрын
I like the beginning..... That Fur Elise is a fantastic touch, Thanks really GOOD! Ok let's see the rest of the video
@konijn19333 жыл бұрын
Loved the 'Für Elise' segment..
@GaborGubicza10 ай бұрын
Nicely done!!! Congrats!
@roygreen44673 жыл бұрын
Great work mate, well done.
@Daniel_PU2394 жыл бұрын
That shit was tight.....true craftsmen!
@rubenmolnes3 жыл бұрын
Just found your video on the main page, and bravo! This was a pleasure to watch! That intro too, loved it!
@bradstanley1493 Жыл бұрын
Awesome design 👍
@rgmoore4 жыл бұрын
beautiful cabinet and terrific videography.
@chuxmix654 жыл бұрын
Wow that's a great build! The opening scene is amazing!
@TrPrecisionMachining4 жыл бұрын
very very professional work...your talent is big.
@MattysWorkshop3 жыл бұрын
Awesome tool cabinet, great job...
@EdwardDowllar4 жыл бұрын
Fantastic job. I really enjoyed watching this. You can tell it took a tremendous amount of time and effort. Thanks for sharing.
@541Maxim4 жыл бұрын
I would agree This Old Tony and Ca' Lem do have their own style though. Excellent videos!!!
@PatrykDarasz3 жыл бұрын
You didn`t show the most interesting part, how you bend the drawers...
@Yarabafwak524 жыл бұрын
Hi Thank you for the video My comment is that, you are welding every thing to every thing Screws will be better in case of repair It is a nice cabinet and you did a great job Thank you
@artmckay67043 жыл бұрын
Ca Lem, you do very nice work with everything that you do. Quality, quality, and yet more quality! As always, thank you for inspiring all of us! :) :) :)
@doctorguntv5704 жыл бұрын
great job! the torch is an extension of your arm! lol
@ackervaldviktor4 жыл бұрын
Definitely one of my favourite channel. Best regards from France. You've made a fantastic job.
@info56channel4 жыл бұрын
oui ce type est très doué ^^
@richardcurtis5564 жыл бұрын
Necessity is the mother of invention.
@martinp88894 жыл бұрын
Excellent. Take care welding gal or plated steel without v good ventilation.
@kevinnathanson68764 жыл бұрын
I like a man who believes in COMMITMENT! Tell me, do you ever use a removable fastener for anything?! ;-) Beautiful job!
@6krash94 жыл бұрын
That’s funny. I need that roller. 🤣
@c.r.edmister52234 жыл бұрын
*People like this Restore my Faith in Humanity*
@richcombs48052 жыл бұрын
Fantastic work!!!!
@wbryantclark4 жыл бұрын
NICE !!! ... can never get enough tool storage, but we'll never stop trying 🤓👍
@anthonylovell22714 жыл бұрын
Tools expand to fill the available space.
@Animisaurus3 жыл бұрын
Dude that is dope as hell! Awesome work.
@BaconbuttywithCheese4 жыл бұрын
The magic roller available in Ho Chi Minh? Very nice cabinet.
@Super-jf9qv4 жыл бұрын
Amazing welding skills. Spray paint finish would have been nicer, but you have to work with what you have. Great job. If you sold this cabinet in Canada, you would pay at least a 2000$.🇨🇦
@superchargerone4 жыл бұрын
such creative opening shot with the music and the drawers! love it!
@jdm26513 жыл бұрын
Amazing work. There is a fabricator in any machinist. The opposite, I am not so sure, and I have proof with my blacksmith friend and his sons.
@bullyproof57074 жыл бұрын
Man I cracked up when the box came out of the roller 🤣 love your vids bro keep it up 👍
@robnhannon4 жыл бұрын
Very jealous of your metalworking skills. Beautiful work.
@Minirider914 жыл бұрын
Fantastic job, congrats
@m.farooqmulla1654 жыл бұрын
As usual fine craft liked it.
@smu11294 жыл бұрын
Anything worth building is worth overbuilding. Awesome.
@EverettsWorkshop4 жыл бұрын
You are very talented, I've got to say! Looks good! If I ever get to visit Vietnam, I want to come visit your shop, you've got a lot of cool stuff on the go.
4 жыл бұрын
always welcome, brother!
@abalansampuri50634 жыл бұрын
Hahaha... What a nice rolling machine..... 👍
@Hartnoa4 жыл бұрын
Amazing work! Could we see a follow up showing more of the finished cabinet?
4 жыл бұрын
Next video maybe :D
@romanermashov15784 жыл бұрын
@ We will wait...😉
@Jer_Schmidt4 жыл бұрын
god it looks SO GOOD! Great job 👍
@xmachine70033 жыл бұрын
You are a good fabricator yourself,youngfella
@fryreartechnology76114 жыл бұрын
Great project and well made. Really enjoyed the video. I person hate grinding and learned to bolt casters on and I had so maybe break off that a lot on makes changing them easy. To do rather then empty it all out to flip it over and grinding them off. Thank you for build
@pyrotechrick76872 жыл бұрын
Black and green baby 🙌
@TheJasonEstes4 жыл бұрын
This is awesome, except I think bolting the drawer guides on would make for easier replacement if they wear out.
@pietrogazzera57334 жыл бұрын
Very well done!
@ronwhite67194 жыл бұрын
Looks great. You might want to get some magnetic welders squares. They help a lot when doing welding alone. Just a thought.
@TheRob2D4 жыл бұрын
Has this guy never heard of a nut and bolt? XD Nice job.
4 жыл бұрын
TheRob2D lol. No need, angle grinder will solve any problem.
@mikemarler82244 жыл бұрын
Proper job. Nicely done
@armandorodriguez644710 ай бұрын
Bro that was beautiful 👍🏽👍🏽
@rickhaass11334 жыл бұрын
nice job - you make it look easy - which we all know it's not....
@kshuy73934 жыл бұрын
Làm ntn rồi thợ nào còn bán đc đồ cho bro nữa !
@samrodian9194 жыл бұрын
Ca Lem that is one super-dooper cabinet man!! The fit and detail are phenomenal. It is a pleasure to watch your videos, as we never know what is coming next! And the humour in the vid is so you, I loved the opening sequence with the Beethoven Fur Elise in sync with the drawers opening and closing! That must have taken you some time to edit that sequence, and on top of that doing the joke with the sheet metal roller for the bending brake, that was so funny.! Keep them coming young man. I can see you becoming one of the very top KZfaq creators in a very short while. Good luck to you and if it is relevant Happy Christmas 2019 ( that's when I saw this video 16/12 /2019)
@orbitrol114 жыл бұрын
Fantastic work super idea
@Pobadill4 жыл бұрын
You are your country's national treasure. I hope they appreciate you.
@benspeedschannel8883 жыл бұрын
Fantastic! I need to make about 4 of those for myself lol
@TheScramble84 жыл бұрын
Fantastic fit and finish, I loved the filming and editing of this as well, a pleasure to watch
@Raul281532 жыл бұрын
What? No embossed vegetable leather tanned flocking? No diamond-encrusted gold medallion? Nice build~!
@strenuousbobbykushner3 жыл бұрын
@CaLem Love your tool chest build! The process made me excited
@sovietelectioncollidingtro62314 жыл бұрын
awesome video editing! very fun to watch.
@buildmotion14264 жыл бұрын
Great job! Very nice fabrication.
@thebigdustin4 жыл бұрын
I’m sure you already know this (or maybe you don’t) but your welder sounds like it’s setup to flood the weld with shielding gas after the arc has stopped to keep it from oxidizing. It’s why you hear that “hiss” sound after every weld tack. Using a lot of gas unnecessarily. If that’s intentional, keep on keeping on. If not, fiddle with your welder to turn that feature off, you didn’t really use it at all.