Great video and great plans! Thanks for both!!! In the video, you had a layout page for your drawer slides. Would you happen to have a copy of the drawer slide layout that you could attach to the plans?

I think it's been ten years since I was able to download/ print plans without having to subscribe/ join a mailing list. It's just so decent of you, super cool! Will be telling everyone that will listen!

For people wondering about the drawer bottom strength: I work at a cabinet shop where we've been building and installing over a hundred drawers per week just like this for years. I've never yet seen one need to be repaired for the bottom coming off. The guides will fail long before the drawer will. It'd be a different story if they were made from boards, but being made from plywood that's not going to grow and shrink a bunch, these will do just fine with glue and staples instead of fancy joints and dados.

I'll admit this video has kept popping up in my feed. I started it watching one time and immediately became bored. That's on me, not the video. After being in my KZfaq feed STILL for another few days I sat down and watched it. I'm glad I did. This is exactly what I've been looking for in my new shop I'm building. Great video!

I built four of these identical to yours 10 years ago, they are still in service today except one bottom to my 3/8 size nut and bolt drawer fell out, because I did not use strong enough plywood, but I used some cheap wafer board for my bottoms, where were you 10 years ago?, I am nowhere near a carpenter or cabinet builder but rather a mechanic. I sure could have used your help back then, smile, good video. Thank you buddy.

Great video!!! I've been building cabinets for over 25 years and have thought MANY times about doing something like this, BUT haven't. I've been torn between whether or not to build an heirloom with dovetail drawers, fancy inlaid drawer fronts, exotic woods, OR keep it simple and effective. You just won me over... THANKS!!!! Lastly, and most important to me is how you made the video. It covers all the important points quickly without dragging all of us through a bunch of mumbo jumbo nonsense and chatter. You got right to the point and even got to show off a tool. Again THANKS!!!

Really nice, I may make one of these for the craft room. Thanks for going through all the step by step, producing the video and sharing free downloadable plans. No complaints here!

I love the way you laid out and installed the drawer slides. It's going to make my build a breeze. Thanks.

One tip. Next time, instead of cutting and assembling drawer pieces, just assemble the 4 sides of a box, and then cut the drawers out by running the entire box over the table saw. If you don't mind recessing the drawer bottoms with a router, you can make the box the exact size of the cabinet (less 1" width for slides and 1/4" height for your top and bottom gaps). Then the 1/8" kerf from you saw blade becomes the drawer spacing. And you can pre-attach the drawer face panel before cutting if you want. Either way, the glue up is faster since you only glue up a single box, and it's actually less error prone since you only do it once.

I like that this is a design I could feasibly build despite having limited tools. Sure, a tablesaw simplifies things. But a circular saw would do the job. Using the spacer to install the drawers is a stroke of genius. The best thing about this, though, is that it is flexible. I can make drawers to fit my tools rather than having to put my tools wherever I can stuff them. And there's room to embellish/upgrade things to make the box more of a showpiece.

Love the way you attach the drawer slides prior to assembly. Brilliant!

OMG all the cabinets I've made I ALSO made my drawer pulls very similar to the way you did it. I did the same thing using sheets of plywood for the drawer faces for the consistent look too! I'm just trying to state that I feel a little validation that someone else came up with the same idea so it means that my idea wasn't silly. I've only built 5 projects in my 40+ year lifetime so I think thats pretty cool.

I absolutely love this Chest. I am a beginner cabinet person. You make it look so simple. Thanks!

Excellent! I've been looking at toolboxes lately and, I'm ashamed to say, this never occurred to me. Looks very sturdy - I'll be building it. Thank you.

Nice! I enjoyed the "straight to the point" format. There are so many DIY channels where they tell you what they're gonna tell you before they get started, then tell you what they're doing before every move and then show you how they screwed every screw and made every cut. EXCRUCIATINGLY PAINFUL. You however were SPOT ON with just enough clarification and plenty of fast forwarding to the next step. I have subscribed to your channel and requested notifications ALL.

You build efficiently, you video and edit efficiently, worth a subscribe. I was just debating spending on a sheet metal tool chest w/drawers. Now I’ll build one for less.

Installing the drawers upside down a great trick! Thanks for the build.

At last! I found a woodworker that works the way I do.

Right on time! Thanks!

Wow, I am absolutely amazed at your well thoughtout plans and your excellent display of Craftsmanship! Well done, Sir!

Great video! I need a cabinet for my workshop and this fills the need!

Another way to tell your Canadian, your hand tools… Canadian tire purchase! Lol Nicely done. You certainly bring a simple way about building drawers.

Thanks for the freebie plans. I like this much better than the shaking red thing I have now.

Thank you for the video!

Princess Auto drawer slides for the win !

thank you very much. Looks perfect. Thank you for the free plans. I'm following you and learning so many great things.

Funny, I've been telling people I'm going to make a wooden tool box again. I won't even try to make it nice and it will be much better than anything I have now. tHanks for the video!

I have never thought to build my own toolbox. I just might now! Love the details covered in the video! Awesome work!

ABSOLUTELY the best way of storage and you made is simple as it gets.....Thank you...

Nice project. That one is on my bucket list.

I like your fast editing. Some people would have made this into a 2 hour video with a lot of redundancy.

Super nice tool chest - great video. Tons of storage without a big footprint. Thanks!

I love this! Thank you!

Nailed It!

Just pretty dang nice there Mr. thanks for posting.

I like my red boxes for all my tools, some mechanical and some woodworking. They're neat. They WORK. And they're convenient. Further they aren't show off stuff and I keep my tools hidden.

Welcome Back.. it is good to see you at it again.. I look forward to see all your future project. I trust you weathering(pun) our beautiful tropical weather these days....

Nicely presented. Good learning

Super clean design 👍🏻👍🏻👍🏻

Thanks for the vid and the free plans. this is a project that I can adapt to build my own studio plan chest for my artwork. Thanks again!

The tool cabinet looks great.

"Like one big ugly piece of plywood."...that was funny!

Good job, just wow. you are a craftsmen

Great project - and the ubiquitous safety sliders (sandals)

Awesome build. Love the adjustment to the large drawer at the end. Genius! And free plans?!? Who does that!

Great to see the safety sandals back in action!

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

Just gorgeous. But enough about you. That project is nice too.

This is awesome thank you so much

Great work.

Well done!

Great build

Thank You...great video

Great project! One suggestion: Sand your plywood and trim before installing the trim. Then you won’t end up with those corners that you can’t reach with your sander.

Great job! Thanks for the plans! Happy Hollidays 🎄

Great video and love the free plans.. pity they arent in metric as well.. 😢

Outstanding. Ya got me thinkn’…

Best T-shirt yet - and a great build to boot!

Outstanding build. I want to try this

Awesome job and love it very well made and strong thank for the free plan thank you brother

Very nice!

The metal boxes always look nice in the store. They look good the first time you roll them into your shop. They look nice sitting there. But they suck for holding woodworking tools! They're great for my sockets, ratchets, screwdrivers etc. That's about it in my opinion. Your build is awesome for chisels, bladed tools etc etc. Much easier on sharpened tool edges. And it's hand made. Nice job! Think I'm going to build one too 👍

Very good thanks.

To my favorite woodworker/youtuber I wish you and your family a very Merry Christmas, filled with love, hope and countless blessings, looking forward to new content in the new year, your biggest fan Mitzi from South Africa 💫

That is a beautiful cabinet. I will be making one of those. Thanks for the video and the free plans. Subscribed!

A real work of art in both design and function....I especially like the stability of the cabinet (it will not tip over when any top drawer is pulled oot (to use your term). Good to see...you seem to be a little more relaxed given your planned break from the intense youtube pressure.

Very cool great job

Nice job!

Looks awesome!!! Good job!! Even better with free plans!!!!! 😊 It’s on my to do list. Thanks

Freakin awesome.

Dude, great to see you on the channel again. Always enjoy your projects, dry wit, and (especially) sarcasm! BTW do you have plans for your projects? How much are they and where could I find them?🤣🤣🤣

This nightmare into the other new nightmare 😂

thats neat!

Awesome!!!

Very nice 👍

Love the simplicity of the joinery, very practical, looks amazing, and something almost anyone could do. We’ll done sir!

I really like this!! Thank you! I'm currently thinking about buying one of those tool carts from Harbor Freight but also considered building one myself. I am curious about how much all this cost but I love the looks of this and it seems quite reasonable as far as build complexity. Well done!

looks great! also looks like Canadian Tire better start sponsoring you !! hope you and the family have a wonderful christmas!

Nicely built, in the uk though it’s cheaper to buy a metal toolbox than it is to buy just the wood needed for this.

What great little project. I need one about one half that size for some lathe chisels and other lathe accessories. The best thing is you really make the construction simple, plus very clear instruction, so it should be a simple build. I couldn't figure out how to download the pdf but I'm sure one of my kids will help, they'll be here for Christmas dinner, after all Mom's doing the cooking.

Hello , Very good and very inspiring I'm from Indonesia

Nice work!

Awesome video. On a side note...I have that ancient Ryobi flashlight as well!

The bottom piece works much better inside.

Gracias. Maestro. Tiene. El. Don de saver. Enseńar. Facil. Simple gracias

First time viewer. This is so Canadian, and I love it.

Nice work

Did anybody else noticed how he pronounce the word OUT, he says it like OAT. 😛😁 And of course the project is amazing!!! thank you for sharing your awesome work!! I will definitely will be building it. cheers!!!👏👏👏👏

I like the simplicity of the build, I've been wanting a flat file cabinet and this could easily be modified to fit that need

Great man... You are a pro 👍👍👍

Nice video and I like your style: explain how to make .

Nice!!!!!

Very good nice project

Hey! The algo got one right, for a change! Subbed on the first video! I need this! Yay! Thanks!

Лучшая подстилка в ящик для инструментов это синтетическая трава ковролин. Она хорошо собирает мусор и чистится

Awesome tool cabinet! Thanks for sharing

Nice work,greetings from germany 👍👍👍👍

Nice piece of work. Well presented video. ✔️✔️✔️

Just found you on YT. Nice! Thanks for the good video/plans!

Whoa, you're back!😳😳😳😳